Co-Cultivation of Leptolyngbya tenuis (Cyanobacteria) and Chlorella ellipsoidea (Green alga) for Biodiesel Production, Carbon Sequestration, and Cadmium Accumulation

Microalgae-mediated bioremediation: current trends and opportunities-a review

Environmental pollution poses a critical global challenge, and traditional wastewater treatment methods often prove inadequate in addressing the complexity and scale of this issue. On the other hand, microalgae exhibit diverse metabolic capabilities that enable them to remediate a wide range of pollutants, including heavy metals, organic contaminants, and excess nutrients. By leveraging the unique metabolic pathways of microalgae, innovative strategies can be developed to effectively remediate polluted environments. Therefore, this review paper highlights the potential of microalgae-mediated bioremediation as a sustainable and cost-effective alternative to conventional methods. It also highlights the advantages of utilizing microalgae and algae-bacteria co-cultures for large-scale bioremediation applications, demonstrating impressive biomass production rates and enhanced pollutant removal efficiency. The promising potential of microalgae-mediated bioremediation is emphasized, presenting a viable and innovative alternative to traditional treatment methods in addressing the global challenge of environmental pollution. This review identifies the opportunities and challenges for microalgae-based technology and proposed suggestions for future studies to tackle challenges. The findings of this review advance our understanding of the potential of microalgae-based technology wastewater treatment.

Microalgae mediated bioremediation of polycyclic aromatic hydrocarbons: Strategies, advancement and regulations

Polycyclic aromatic hydrocarbons (PAHs) are pervasive in the atmosphere and are one of the emerging pollutants that cause harmful effects in living systems. There are some natural and anthropogenic sources that can produce PAHs in an uncontrolled way. Several health hazards associated with PAHs like abnormality in the reproductive system, endocrine system as well as immune system have been explained. The mutagenic or carcinogenic effects of hydrocarbons in living systems including algae, vertebrates and invertebrates have been discussed. For controlling PAHs, biodegradation has been suggested as an effective and eco-friendly process. Microalgae-based biosorption and biodegradation resulted in the removal of toxic contaminants. Microalgae both in unialgal form and in consortium (with bacteria or fungi) performed good results in bioaccumulation and biodegradation. In the present review, we highlighted the general information about the PAHs, conventional versus advanced technology for removal. In addition microalgae based removal and toxicity is discussed. Furthermore this work provides an idea on modern scientific applications like genetic and metabolic engineering, nanomaterials-based technologies, artificial neural network (ANN), machine learning (ML) etc. As rapid and effective methods for bioremediation of PAHs. With several pros and cons, biological treatments using microalgae are found to be better for PAH removal than any other conventional technologies.

Utilization of microalgal-bacterial energy nexus improves CO2 sequestration and remediation of wastewater pollutants for beneficial environmental services

Carbon dioxide (CO2) emissions from the combustion of fossil fuels and coal are primary contributors of greenhouse gases leading to global climate change and warming. The toxicity of heavy metals and metalloids in the environment threatens ecological functionality, diversity and global human life. The ability of microalgae to thrive in harsh environments such as industrial wastewater, polluted lakes, and contaminated seawaters presents new, environmentally friendly, and less expensive CO2 remediation solutions. Numerous microalgal species grown in wastewater for industrial purposes may absorb and convert nitrogen, phosphorus, and organic matter into proteins, oil, and carbohydrates. In any multi-faceted micro-ecological system, the role of bacteria and their interactions with microalgae can be harnessed appropriately to enhance microalgae performance in either wastewater treatment or algal production systems. This algal-bacterial energy nexus review focuses on examining the processes used in the capture, storage, and biological fixation of CO2 by various microalgal species, as well as the optimized production of microalgae in open and closed cultivation systems. Microalgal production depends on different biotic and abiotic variables to ultimately deliver a high yield of microalgal biomass.

A state of the art review on the co-cultivation of microalgae-fungi in wastewater for biofuel production

The microalgae have a great potential as the fourth generation biofuel feedstock to deal with energy crisis, but the cost of production and biomass harvest are the major hurdles in terms of large scale production and applications. Using filamentous fungi to culture targeted alga for biomass accumulation and eventually harvesting is a sustainable way to mitigate environmental impacts. Microalgal co-culture method could be an alternative to overcome limitations and increase biomass yield and lipid accumulation. It was found to be the high feasibility for the production of biofuels from fungi and microalgae using wastewater. This article aimed to state the synergistic approaches, their culture protocols, harvesting procedure and their potential biotechnological applications. Additionally, algal-fungal consortia could digest cellulosic biomass, potentially reducing operating costs as part of industrial need. As a result of co-cultivation, biofuel production could be economically feasible owing to its excellent ability to treat wastewater and be eco-friendly. The implications of the innovative co-cultivation technology have demonstrated the potential for further development based on the policies that have been supported and implemented.

Effects of a novel Cd passivation approach on soil Cd availability, plant uptake, and microbial activity in weakly alkaline soils

Heavy metal pollution, including that caused by cadmium (Cd), is a matter of increasing concern. Although in situ passivation remediation has been widely used to treat heavy metal-polluted soils, most studies have focused on acidic soils, while studies on alkaline soil conditions are scarce. In this study, the effects of biochar (BC), phosphate rock powder (PRP), and humic acid (HA) on Cd²⁺ adsorption were examined alone and in combination to choose an appropriate Cd passivation approach for weakly alkaline soils. Additionally, the combined impact of passivation on Cd availability, plant Cd absorption, plant physiology indexes, and soil microbial community was elucidated. BC had a higher Cd adsorption capacity and removal rate than those of PRP and HA. Moreover, HA and PRP enhanced the adsorption capacity of BC. A combination of biochar and humic acid (BHA), and biochar and phosphate rock powder (BPRP) significantly affected soil Cd passivation. BHA and BPRP decreased the plant Cd content and soil Cd-DTPA (diethylenetriaminepentaacetic acid) by 31.36 %, 20.80 %, 38.19 %, and 41.26 %, respectively; however, they increased the fresh weight by 65.64-71.48 % respectively, and dry weight by 62.41-71.35 %, respectively. Notably, only BPRP increased the node and root tip number in wheat. Total protein (TP) content increased in BHA and BPRP, with BHA showing lower TP than BPRP. BHA and BPRP showed a reduction in glutathione (GSH), malondialdehyde (MDA), H₂O₂, and peroxidase (POD); BHA showed a significantly lower GSH than BPRP. Additionally, BHA and BPRP increased soil sucrase, alkaline phosphatase, and urease activities, with BPRP showing considerably higher enzyme activity than BHA. Both BHA and BPRP increased the number of soil bacteria, altered the community composition, and critical metabolic pathways. The results demonstrated that BPRP could be used as a highly effective, novel passivation technique for the remediation of Cd-contaminated soil.

Subcellular distribution, chemical forms of cadmium and rhizosphere microbial community in the process of cadmium hyperaccumulation in duckweed

Duckweed is a newly reported Cd hyperaccumulator that grow rapidly; however, little is known about its tolerance and detoxification mechanisms. In this study, we investigated the tissue, subcellular, and chemical form distribution of the Cd in duckweed and studied the influences of Cd on duckweed growth, ultrastructure, and rhizosphere microbial community. The results showed that Cd could negatively affect the growth of duckweed and shorten the root length. More Cd accumulated in the roots than in the leaves, and Cd was transferred from the roots to the leaves with time. During 12-24 h, Cd mainly existed in the cell wall fraction (2.05 %-95.52 %) and the organelle fraction (5.03 %-97.80 %), followed the soluble fraction (0.14 %-16.98 %). Over time, the proportion of Cd in the organelles increased (46.64 %-92.83 %), exceeding that in the cell wall (6.79 %-66.23 %), which indicated that duckweed detoxification mechanism may be related to the retention of cell wall and vacuole. The main chemical form of Cd was the NaCl-extracted state (30.15 %-88.66 %), which was integrated with pectate and protein. With increasing stress concentration and time, the proportion of the HCl-extracted state and HAc-extracted state increased, and they were low-toxic Cd oxalate and Cd phosphate, respectively. Cd damaged the ultrastructure of cells such as chloroplasts and mitochondria and inhibited the diversity of microbial communities in the duckweed rhizosphere; however, the dominant populations that could tolerate heavy metals increased. It was speculated that duckweed distributed Cd in a less toxic chemical form in a less active location, mainly through retention in the root cell wall and sequestration in the leaf vacuoles, and is dynamically adjusted. The rhizosphere microbial communities tolerate heavy metals may also be one of the mechanisms by which duckweed can tolerate Cd. This study revealed the mechanism of duckweed tolerance and detoxification of Cd at the molecular level and provides a theoretical basis for further development of duckweed.

Production of phycobiliproteins, bioplastics and lipids by the cyanobacteria Synechocystis sp. treating secondary effluent in a biorefinery approach

Cyanobacteria have been identified as promising organisms to reuse nutrients from waste effluents and produce valuable compounds such as lipids, polyhydroxyalkanoates (PHAs), and pigments. However, almost all studies on cyanobacterial biorefineries have been performed under lab scale and short cultivation periods. The present study evaluates the cultivation of the cyanobacterium Synechocystis sp. in a pilot scale 30 L semi-continuous photobioreactor fed with secondary effluent for a period of 120 days to produce phycobiliproteins, polyhydroxybutyrate (PHB) and lipids. To this end, the harvested biomass from the semi-continuous photobioreactor was transferred into 5 L vertical column batch photobioreactors to perform PHB and lipid accumulation under nutrient starvation. Three hydraulic retention times (HRT) (6, 8 and 10 days) were tested in the semi-continuous photobioreactor to evaluate its influence on biomass growth and microbial community. A maximum biomass concentration of 1.413 g L^-1 and maximum productivity of 173 mg L^-1 d^-1 was reached under HRT of 8 days. Microscopy analysis revealed a shift from Synechocystis sp. to Leptolyngbya sp. and green algae when HRT of 6 days was used. Continuous, stable production of phycobiliproteins in the semi-continuous photobioreactor was obtained, reaching a maximum content of 7.4%_dcw in the biomass. In the batch photobioreactors a PHB content of 4.8%_dcw was reached under 7 days of nitrogen and phosphorus starvation, while a lipids content of 44.7%_dcw was achieved under 30 days of nitrogen starvation. PHB and lipids production was strongly dependent on the amount of nutrients withdrawn from the grow phase. In the case of lipids, their production was stimulated when there was only phosphorus depletion. While Nitrogen and phosphorus limitation was needed to enhance the PHB production. In conclusion, this study demonstrates the feasibility of cultivating cyanobacteria in treated wastewater to produce bio-based valuable compounds within a circular bioeconomy approach.

Enhancing biomass and lipid productivity of a green microalga Parachlorella kessleri for biodiesel production using rapid mutation of atmospheric and room temperature plasma

BACKGROUND

Microalgae, with their high adaptability to various stress conditions and rapid growth, are considered excellent biomass resources for lipid production and biodiesel feedstocks. However, lipid yield and productivity of the natural strains are common bottlenecks in their large-scale use for lipid production, which can be overcome by evolving new strains using conventional and advanced mutagenic techniques. It is challenging to generate microalgae strains capable of high lipid synthesis through natural selection. As a result, random mutagenesis is currently considered a viable option in many scenarios. The objective of this study was to explore atmospheric and room temperature plasma (ARTP) as a random mutagenesis technique to obtain high lipid-accumulating mutants of a green microalga for improved biodiesel production.

RESULTS

A green microalgal species was isolated from the Chinese Yellow Sea and identified as Parachlorella kessleri (OM758328). The isolated microalga was subsequently mutated by ARTP to obtain high lipid-accumulating mutants. Based on the growth rate and lipid content, 5 mutants (named M1, M2, M4, M5, and M8) were selected from 15 pre-selected mutants. These five mutants varied in their growth rate from 0.33 to 0.68 day^-1, with the lipid content varying between 0.25 g/L in M2 to 0.30 g/L in M8 at 10th day of cultivation. Among the mutants, M8 showed the maximum biomass productivity (0.046 g/L/day) and lipid productivity (20.19 mg/L/day), which were 75% and 44% higher than the wild strain, respectively. The triglyceride (TAG) content of M8 was found to be 0.56 g/L at 16th day of cultivation, which was 1.77-fold higher than that of the wild strain. Furthermore, M8 had the highest saturated fatty acids (C16-18) with the lowermost polyunsaturated fatty acid content, which are favorable properties of a biodiesel feedstock according to international standards.

CONCLUSION

The mutant strain of P. kessleri developed by the ARTP technique exhibited significant improvements in biomass productivity, lipid content, and biodiesel quality. Therefore, the biomass of this mutant microalga could be a potential feedstock for biodiesel production.

Use of Quartz Sand Columns to Study Far-Red Light Photoacclimation (FaRLiP) in Cyanobacteria

Some cyanobacteria can perform far-red light photoacclimation (FaRLiP), which allows them to use far-red light (FRL) for oxygenic photosynthesis. Most of the cyanobacteria able to use FRL were discovered in low visible-light (VL; λ = 400-700 nm) environments that are also enriched in FRL (λ = 700-800 nm). However, these cyanobacteria grow faster in VL than in FRL in laboratory conditions, indicating that FRL is not their preferred light source when VL is available. Therefore, it is interesting to understand why such strains were primarily found in FRL-enriched but not VL-enriched environments. To this aim, we established a terrestrial model system with quartz sand to study the distribution and photoacclimation of cyanobacterial strains. A FaRLiP-performing cyanobacterium, Leptolyngbya sp. JSC-1, and a VL-utilizing model cyanobacterium, Synechocystis sp. PCC 6803, were compared in this study. We found that, although Leptolyngbya sp. JSC-1 can grow well in both VL and FRL, Synechocystis sp. PCC 6803 grows much faster than Leptolyngbya sp. JSC-1 in VL. In addition, the growth was higher in liquid cocultures than in monocultures of Leptolyngbya sp. JSC-1 or Synechocystis sp. PCC 6803. In an artificial terrestrial model system, Leptolyngbya sp. JSC-1 has an advantage when growing in coculture at greater depths by performing FaRLiP. Therefore, strong competition for VL and slower growth rate are possible reasons why FRL-utilizing cyanobacteria are found in environments with low VL intensities. This model system provides a valuable tool for future studies of cyanobacterial ecological niches and interactions in a terrestrial environment. IMPORTANCE This study uses sand columns to establish a terrestrial model system for the investigation of the distribution and acclimation of cyanobacteria to far-red light. Previous studies of this group of cyanobacteria required direct in situ samplings. The variability of conditions and abundances of the cyanobacteria in natural settings impeded detailed analyses and comparisons. Therefore, we established this model system under controlled conditions in the laboratory. In this system, the distribution and acclimation of two cyanobacteria were similar to the situation observed in natural environments, which validates that it can be used to study fundamental questions. Using this approach, we made the unanticipated observation that two cyanobacteria grow faster in coculture than in axenic cultures. This laboratory-based model system can provide a valuable new tool for comparing cyanobacterial strains (e.g., mutants and wild type), exploring interactions between cyanobacterial strains and interactions with other bacteria, and characterizing ecological niches of cyanobacteria.

Paradigm shift in algal biomass refinery and its challenges

Microalgae have been studied and tested for over 70 years. However, biodiesel, the prime target of the algal industry, has suffered from low competitiveness and current steps toward banning the internal combustion engine all over the world. Meanwhile, interest in reducing CO₂ emissions has grown as the world has witnessed disasters caused by global warming. In this situation, in order to maximize the benefits of the microalgal industry and surmount current limitations, new breakthroughs are being sought. First, drop-in fuel, mandatory for the aviation and maritime industries, has been discussed as a new product. Second, methods to secure stable and feasible outdoor cultivation focusing on CO₂ sequestration were investigated. Lastly, the need for an integrated refinery process to simultaneously produce multiple products has been discussed. While the merits of microalgae industry remain valid, further investigations into these new frontiers would put algal industry at the core of future bio-based economy.

Enhancement of Lipid Productivity and Self-flocculation by Cocultivating Monoraphidium sp. FXY-10 and Heveochlorella sp. Yu Under Mixotrophic Mode

To maintain high microalgae lipid productivity and flocculation efficiency simultaneously and reduce the production cost of microalgae lipids, Monoraphidium sp. FXY-10 with high lipid-producing capacity and Heveochlorella sp. Yu with strong self-flocculation ability were cocultivated and studied. Cocultivated microalgae lipid productivity and flocculation efficiency were increased to 203.8 mg L-1 day-1 and 70.55%, respectively, which is potentially related to the excessive competitive depletion of nitrogen sources and the upregulation of correlative key genes in lipid anabolic metabolism. Under cocultivation conditions, microalgae cells could enter the stationary phase 2 days earlier than that under monocultivation conditions, thus reducing the culture time. Relative expression of the accD, ME, and rbcL genes was upregulated to varying degrees, and the enzyme activities of ACCase, ME, and RuBisCO were also significantly increased compared with those in monocultivation. Moreover, fatty acid composition showed that microalgae lipids in cocultivation exhibited potential as a feedstock for biodiesel.