|
1
|
Hnamte M, Pulikkal AK. Clay-polymer nanocomposites for water and wastewater treatment: A comprehensive review. CHEMOSPHERE 2022; 307:135869. [PMID: 35948093 DOI: 10.1016/j.chemosphere.2022.135869] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/19/2022] [Revised: 07/22/2022] [Accepted: 07/24/2022] [Indexed: 06/15/2023]
Abstract
A majority of water pollution or contamination occurs through the discharge of effluents from industries. Wastewater treatment is crucial to protect our water sources from harmful pollutants. Therefore, a number of efforts have been made to tackle this issue by employing different techniques. Clay minerals and polymers are among these materials used extensively in wastewater treatment. While both have their own drawbacks, it is fascinating to discover that they complement each other to overcome most of their limitations. As a result, clay-polymer nanocomposites (CPNs) have been found to be highly efficient in the adsorption of pollutants from water and show promising results to be a long-term candidate for this purpose. In this paper, we discuss about different types of clay and polymers used in the preparation of CPNs. The work also focuses on the different types of clay-polymer nanocomposites, their synthesis and factors affecting their performance such as pH, temperature, contact time, pollutant concentration and adsorbent dose. In addition, the maximum adsorption capacity, mechanism and kinetics of adsorption are highlighted to assess the performance of CPNs. Various studies indicate that CPNs are only a few steps away from becoming one of the best options for wastewater treatment due to their multiple desirable properties.
Collapse
Affiliation(s)
- Malsawmdawngkima Hnamte
- Department of Chemistry, National Institute of Technology Mizoram, Chaltlang, Aizawl, 796012, India
| | - Ajmal Koya Pulikkal
- Department of Chemistry, National Institute of Technology Mizoram, Chaltlang, Aizawl, 796012, India.
| |
Collapse
|
|
2
|
Pan XF, Wu B, Gao HL, Chen SM, Zhu Y, Zhou L, Wu H, Yu SH. Double-Layer Nacre-Inspired Polyimide-Mica Nanocomposite Films with Excellent Mechanical Stability for LEO Environmental Conditions. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2105299. [PMID: 34802169 DOI: 10.1002/adma.202105299] [Citation(s) in RCA: 19] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/09/2021] [Revised: 09/18/2021] [Indexed: 06/13/2023]
Abstract
Owing to their outstanding comprehensive performance, polyimide (PI) composite films are widely used on the external surfaces of spacecraft to protect them from the adverse conditions of low Earth orbit (LEO). However, current PI composite films have inadequate mechanical properties and atomic oxygen (AO) resistance. Herein, this work fabricates a new PI-based nanocomposite film with greatly enhanced mechanical properties and AO resistance by integrating mica nanosheets with PI into a unique double-layer nacre-inspired structure with a much higher density of mica nanosheets in the top layer. In addition, the unique microstructure and the intrinsic properties of mica also impart the nanocomposite film with favorable ultraviolet and high-temperature resistance. The comprehensive performance of this material is superior to those of pure PI, single-layer PI-mica, and previously reported PI-based composite films. Thus, the double-layer nanocomposite film displays great potential as an aerospace material for use in LEO.
Collapse
Affiliation(s)
- Xiao-Feng Pan
- Division of Nanomaterials and Chemistry, Hefei National Laboratory for Physical Sciences at the Microscale, Institute of Energy, Hefei Comprehensive National Science Center, CAS Center for Excellence in Nanoscience, Department of Chemistry, Institute of Biomimetic Materials and Chemistry, Anhui Engineering Laboratory of Biomimetic Materials, University of Science and Technology of China, Hefei, 230026, China
| | - Bao Wu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, CAS Center for Excellence in Complex System Mechanics, University of Science and Technology of China, Hefei, Anhui, 230027, China
| | - Huai-Ling Gao
- Division of Nanomaterials and Chemistry, Hefei National Laboratory for Physical Sciences at the Microscale, Institute of Energy, Hefei Comprehensive National Science Center, CAS Center for Excellence in Nanoscience, Department of Chemistry, Institute of Biomimetic Materials and Chemistry, Anhui Engineering Laboratory of Biomimetic Materials, University of Science and Technology of China, Hefei, 230026, China
| | - Si-Ming Chen
- Division of Nanomaterials and Chemistry, Hefei National Laboratory for Physical Sciences at the Microscale, Institute of Energy, Hefei Comprehensive National Science Center, CAS Center for Excellence in Nanoscience, Department of Chemistry, Institute of Biomimetic Materials and Chemistry, Anhui Engineering Laboratory of Biomimetic Materials, University of Science and Technology of China, Hefei, 230026, China
| | - YinBo Zhu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, CAS Center for Excellence in Complex System Mechanics, University of Science and Technology of China, Hefei, Anhui, 230027, China
| | - LiChuan Zhou
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, CAS Center for Excellence in Complex System Mechanics, University of Science and Technology of China, Hefei, Anhui, 230027, China
| | - HengAn Wu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, CAS Center for Excellence in Complex System Mechanics, University of Science and Technology of China, Hefei, Anhui, 230027, China
| | - Shu-Hong Yu
- Division of Nanomaterials and Chemistry, Hefei National Laboratory for Physical Sciences at the Microscale, Institute of Energy, Hefei Comprehensive National Science Center, CAS Center for Excellence in Nanoscience, Department of Chemistry, Institute of Biomimetic Materials and Chemistry, Anhui Engineering Laboratory of Biomimetic Materials, University of Science and Technology of China, Hefei, 230026, China
| |
Collapse
|