The influence of reinforcement, alkali treatment, compression pressure and temperature in fabrication of sisal/coir/epoxy composites: GRA and ANN prediction

Coir Fibers Treated with Henna as a Potential Reinforcing Filler in the Synthesis of Polyurethane Composites

In this study, coir fibers were successfully modified with henna (derived from the Lawsonia inermis plant) using a high-energy ball-milling process. In the next step, such developed filler was used as a reinforcing filler in the production of rigid polyurethane (PUR) foams. The impact of 1, 2, and 5 wt % of coir-fiber filler on structural and physico-mechanical properties was evaluated. Among all modified series of PUR composites, the greatest improvement in physico-mechanical performances was observed for PUR composites reinforced with 1 wt % of the coir-fiber filler. For example, on the addition of 1 wt % of coir-fiber filler, the compression strength was improved by 23%, while the flexural strength increased by 9%. Similar dependence was observed in the case of dynamic-mechanical properties—on the addition of 1 wt % of the filler, the value of glass transition temperature increased from 149 °C to 178 °C, while the value of storage modulus increased by ~80%. It was found that PUR composites reinforced with coir-fiber filler were characterized by better mechanical performances after the UV-aging.

Peanut oil cake-derived cellulose fiber: Extraction, application of mechanical and thermal properties in pineapple/flax natural fiber composites

In this work peanut oil cake extracted Cellulose Micro Filler (CMF) is used for the advancement of mechanical and thermal properties in natural fiber composites. This fiber powder was used in enhancing the applications of Pineapple (P)/Flax (F) natural fiber epoxy composites. The X Ray Diffraction (XRD) results of CMF showed improved Crystalline Index (Crl) of 70.25° and crystalline size of 5.5 nm. FTIR results confirmed the rich cellulose content in functional groups of filler with peaks at 1058 cm^-1, 1162 cm^-1, 1370 cm^-1 and 1428 cm^-1. Mechanical results showed a positive impact with incorporation of CMF in PF hybrid fiber composites. Thermal stability results showed enhancement in the degradation temperature, residual %, endothermic peak and enthalpy by the incorporation of CMF. In the 30% PF combinations degradation temperature T₅₀, T₇₀, T₇₀ enhanced from 387.73-391.08°, 434.81-454.81° and 468.91-553.36° by the filler substitution. Similarly residual % increased from 17.69-24.35%. The combination with 35% PF showed enhancement in degradation temperature, residual percentage, endothermic peak and enthalpy with filler addition up to 3%.