Computed tomography myocardial perfusion vs 15O-water positron emission tomography and fractional flow reserve

Diagnostic Reference Levels in PET Imaging at Chulabhorn Hospital, Thailand

Diagnostic reference levels (DRLs) are an important tool for controlling radiation exposure and ensuring safety in medical applications. In Thailand, DRL data have been gathered and established for nuclear medicine diagnostics since 2021. However, there is a lack of information on PET imaging examinations. At the National Cyclotron and PET Scan Centre, Chulabhorn Hospital, radiopharmaceuticals are produced for medical imaging and research, and a wide range of PET/CT and PET/MRI examinations are performed. Our objective was to investigate the administered activity of radiopharmaceuticals in patients undergoing PET imaging, especially the existing data on DRLs in medical diagnostic imaging. Methods: This was a retrospective study on nuclear medicine patients at the National Cyclotron and PET Scan Centre in 2023. Statistical analysis, including the mean and the 75th percentile values, was conducted to determine DRLs according to the International Commission on Radiological Protection guidelines. Results: The center performed 8,711 PET/CT and PET/MRI studies with 13 protocols in 2023. The most commonly administered activity was 18F-FDG in oncology and neurology examinations, with DRLs of 186.11 and 136.16 MBq, respectively. These values were notably almost twice lower than several reports in other countries. Conclusion: There is a lack of comprehensive data on most DRLs for PET imaging at this center because of the nonwidespread use of several radiopharmaceuticals. However, the lower DRLs for 18F-FDG can highlight the need for ongoing investigation toward the establishment of local DRLs, as well as assurance on the safety and efficiency of radiation used in nuclear medicine.

Differentiating Macrovascular and Microvascular Ischemia Using Fractal Analysis of Dynamic Myocardial Perfusion Stress-CT

OBJECTIVES

Fractal analysis of dynamic myocardial stress computed tomography perfusion imaging (4D-CTP) has shown potential to noninvasively differentiate obstructive coronary artery disease (CAD) and coronary microvascular disease (CMD). This study validates fractal analysis of 4D-CTP in a multicenter setting and assesses its diagnostic accuracy in subgroups with ischemia and nonobstructed coronary arteries (INOCA) and with mild to moderate stenosis.

MATERIALS AND METHODS

From the AMPLIFiED multicenter trial, patients with suspected or known chronic myocardial ischemia and an indication for invasive coronary angiography were included. Patients underwent dual-source CT angiography, 4D-CTP, and CT delayed-enhancement imaging. Coronary artery disease, CMD, and normal perfusion were defined by a combined reference standard comprising invasive coronary angiography with fractional flow reserve, and absolute or relative CT-derived myocardial blood flow. Nonobstructed coronary arteries were defined as ≤25% stenosis and mild to moderate stenosis as 26%-80%.

RESULTS

In 127 patients (27% female), fractal analysis accurately differentiated CAD (n = 61, 23% female), CMD (n = 23, 30% female), and normal perfusion (n = 34, 35% female) with a multiclass area under the receiver operating characteristic curve (AUC) of 0.92 and high agreement (multiclass κ = 0.89). In patients with ischemia (n = 84), fractal analysis detected CAD (n = 61) over CMD (n = 23) with sensitivity of 95%, specificity of 74%, accuracy of 89%, and AUC of 0.83. In patients with nonobstructed coronary arteries (n = 33), INOCA (n = 15) was detected with sensitivity of 100%, specificity of 78%, accuracy of 88%, and AUC of 0.94. In patients with mild to moderate stenosis (n = 27), fractal analysis detected CAD (n = 19) over CMD with sensitivity of 84%, specificity of 100%, accuracy of 89%, and AUC of 0.95.

CONCLUSIONS

In this multicenter study, fractal analysis of 4D-CTP accurately differentiated CAD and CMD including subgroups with INOCA and with mild to moderate stenosis.

Coronary Artery Disease: Role of Computed Tomography and Recent Advances

In this review, the authors summarize the role of coronary computed tomography angiography and coronary artery calcium scoring in different clinical presentations of chest pain and preventative care and discuss future directions and new technologies such as pericoronary fat inflammation and the growing footprint of artificial intelligence in cardiovascular medicine.

Strengths and weaknesses of alternative noninvasive imaging approaches for microvascular ischemia

Structural and functional abnormalities of coronary microvasculature are highly prevalent in several clinical settings and often associated with worse clinical outcomes. Therefore, there is a growing interest in the detection and treatment of this, often overlooked, disease. Coronary angiography allows the assessment of the Coronary flow reserve (CFR) and the index of microcirculatory resistance (IMR). However, the measurement of these parameters is not always feasible because of limited technical availability and the need for a cardiac catheterization with a small but real risk of potential complications. Recent advances in non-invasive imaging techniques allow the assessment of coronary microvascular function with good accuracy and reproducibility. The objective of this review is to discuss the strengths and weaknesses of alternative non-invasive approaches used in the diagnosis of coronary microvascular dysfunction (CMD), highlighting the most recent advances for each imaging modality.

Recent Advances in Cardiovascular Diseases Research Using Animal Models and PET Radioisotope Tracers

Cardiovascular diseases (CVD) is a collective term describing a range of conditions that affect the heart and blood vessels. Due to the varied nature of the disorders, distinguishing between their causes and monitoring their progress is crucial for finding an effective treatment. Molecular imaging enables non-invasive visualisation and quantification of biological pathways, even at the molecular and subcellular levels, what is essential for understanding the causes and development of CVD. Positron emission tomography imaging is so far recognized as the best method for in vivo studies of the CVD related phenomena. The imaging is based on the use of radioisotope-labelled markers, which have been successfully used in both pre-clinical research and clinical studies. Current research on CVD with the use of such radioconjugates constantly increases our knowledge and understanding of the causes, and brings us closer to effective monitoring and treatment. This review outlines recent advances in the use of the so-far available radioisotope markers in the research on cardiovascular diseases in rodent models, points out the problems and provides a perspective for future applications of PET imaging in CVD studies.

Fractal analysis of 4D dynamic myocardial stress-CT perfusion imaging differentiates micro- and macrovascular ischemia in a multi-center proof-of-concept study

Fractal analysis of dynamic, four-dimensional computed tomography myocardial perfusion (4D-CTP) imaging might have potential for noninvasive differentiation of microvascular ischemia and macrovascular coronary artery disease (CAD) using fractal dimension (FD) as quantitative parameter for perfusion complexity. This multi-center proof-of-concept study included 30 rigorously characterized patients from the AMPLIFiED trial with nonoverlapping and confirmed microvascular ischemia (n_micro = 10), macrovascular CAD (n_macro = 10), or normal myocardial perfusion (n_normal = 10) with invasive coronary angiography and fractional flow reserve (FFR) measurements as reference standard. Perfusion complexity was comparatively high in normal perfusion (FD_normal = 4.49, interquartile range [IQR]:4.46-4.53), moderately reduced in microvascular ischemia (FD_micro = 4.37, IQR:4.36-4.37), and strongly reduced in macrovascular CAD (FD_macro = 4.26, IQR:4.24-4.27), which allowed to differentiate both ischemia types, p < 0.001. Fractal analysis agreed excellently with perfusion state (κ = 0.96, AUC = 0.98), whereas myocardial blood flow (MBF) showed moderate agreement (κ = 0.77, AUC = 0.78). For detecting CAD patients, fractal analysis outperformed MBF estimation with sensitivity and specificity of 100% and 85% versus 100% and 25%, p = 0.02. In conclusion, fractal analysis of 4D-CTP allows to differentiate microvascular from macrovascular ischemia and improves detection of hemodynamically significant CAD in comparison to MBF estimation.

Current Use and Complementary Value of Combining in Vivo Imaging Modalities to Understand the Renoprotective Effects of Sodium-Glucose Cotransporter-2 Inhibitors at a Tissue Level

Sodium-glucose cotransporter-2 inhibitors (SGLT2i) were initially developed to treat diabetes and have been shown to improve renal and cardiovascular outcomes in patients with- but also without diabetes. The mechanisms underlying these beneficial effects are incompletely understood, as is the response variability between- and within patients. Imaging modalities allow in vivo quantitative assessment of physiological, pathophysiological, and pharmacological processes at kidney tissue level and are therefore increasingly being used in nephrology. They provide unique insights into the renoprotective effects of SGLT2i and the variability in response and may thus contribute to improved treatment of the individual patient. In this mini-review, we highlight current work and opportunities of renal imaging modalities to assess renal oxygenation and hypoxia, fibrosis as well as interaction between SGLT2i and their transporters. Although every modality allows quantitative assessment of particular parameters of interest, we conclude that especially the complementary value of combining imaging modalities in a single clinical trial aids in an integrated understanding of the pharmacology of SGLT2i and their response variability.

Static CT myocardial perfusion imaging: image quality, artifacts including distribution and diagnostic performance compared to 82Rb PET

Background

Rubidium-82 positron emission tomography (⁸²Rb PET) MPI is considered a noninvasive reference standard for the assessment of myocardial perfusion in coronary artery disease (CAD) patients. Our main goal was to compare the diagnostic performance of static rest/ vasodilator stress CT myocardial perfusion imaging (CT-MPI) to stress/ rest ⁸²Rb PET-MPI for the identification of myocardial ischemia.

Methods

Forty-four patients with suspected or diagnosed CAD underwent both static CT-MPI and ⁸²Rb PET-MPI at rest and during pharmacological stress. The extent and severity of perfusion defects on PET-MPI were assessed to obtain summed stress score, summed rest score, and summed difference score. The extent and severity of perfusion defects on CT-MPI was visually assessed using the same grading scale. CT-MPI was compared with PET-MPI as the gold standard on a per-territory and a per-patient basis.

Results

On a per-patient basis, there was moderate agreement between CT-MPI and PET-MPI with a weighted 0.49 for detection of stress induced perfusion abnormalities. Using PET-MPI as a reference, static CT-MPI had 89% sensitivity (SS), 58% specificity (SP), 71% accuracy (AC), 88% negative predictive value (NPV), and 59% positive predictive value (PPV) to diagnose stress-rest perfusion deficits on a per-patient basis. On a per-territory analysis, CT-MPI had 73% SS, 65% SP, 67% AC, 90.8% NPV, and 34% PPV to diagnose perfusion deficits.

Conclusions

CT-MPI has high sensitivity and good overall accuracy for the diagnosis of functionally significant CAD using ⁸²Rb PET-MPI as the reference standard. CT-MPI may play an important role in assessing the functional significance of CAD especially in combination with CCTA.

Effect of short-term smoking & L-arginine on coronary endothelial function assessed by cardiac magnetic resonance cold pressor testing: a pilot study

Background

The effect of smoking on coronary vasomotion has been investigated in the past with various imaging techniques in both short- and long-term smokers. Additionally, coronary vasomotion has been shown to be normalized in long-term smokers by L-Arginine acting as a substrate for NO synthase, revealing the coronary endothelium as the major site of abnormal vasomotor response. Aim of the prospective cohort study was to investigate coronary vasomotion of young healthy short-term smokers via magnetic resonance cold pressor test with and without the administration of L-Arginine and compare obtained results with the ones from nonsmokers.

Methods

Myocardial blood flow (MBF) was quantified with first-pass perfusion MRI on a 1.5 T scanner in healthy short-term smokers (N = 10, age: 25.0 ± 2.8 years, 5.0 ± 2.9 pack years) and nonsmokers (N = 10, age: 34.3 ± 13.6) both at rest and during cold pressor test (CPT). Smokers underwent an additional examination after administration of L-Arginine within a median of 7 days of the naïve examination.

Results

MBF at rest turned out to be 0.77 ± 0.30 (smokers with no L-Arginine; mean ± standard deviation), 0.66 ± 0.21 (smokers L-Arginine) and 0.84 ± 0.08 (nonsmokers). Values under CPT were 1.21 ± 0.42 (smokers no L-Arginine), 1.09 ± 0.35 (smokers L-Arginine) and 1.63 ± 0.33 (nonsmokers). In all groups, MBF was significantly increased under CPT compared to the corresponding rest examination (p < 0.05 in all cases). Additionally, MBF under CPT was significantly different between the smokers and the nonsmokers (p = 0.002). MBF at rest was significantly different between the smokers when L-Arginine was given and the nonsmokers (p = 0.035).

Conclusion

Short-term smokers showed a reduced response to cold both with and without the administration of L-Arginine. However, absolute MBF values under CPT were lower compared to nonsmokers independently of L-Arginine administration.

Cardiac Computed Tomography Perfusion: Contrast Agents, Challenges and Emerging Methodologies from Preclinical Research to the Clinics

Computed Tomography (CT) has long been regarded as a purely anatomical imaging modality. Recent advances on CT technology and Contrast Agents (CA) in both clinical and preclinical cardiac imaging offer opportunities for the use of CT in functional imaging. Combined with modern ECG-gating techniques, functional CT has now become a reality allowing a comprehensive evaluation of myocardial global and regional function, perfusion and coronary angiography. This article aims at reviewing the current status of cardiac CT perfusion and micro-CT perfusion with established and experimental scanners and contrast agents, from clinical practice to the experimental domain of investigations based on animal models of heart diseases.

Cardiac CT perfusion and FFRCTA: pathophysiological features in ischemic heart disease

Cardiac computed tomography (CCT) has rapidly evolved, becoming a powerful integrated tool for the evaluation of coronary artery disease (CAD), and being superior to other noninvasive methods due to its high accuracy and ability to simultaneously assess both lumen stenosis and atherosclerotic plaque burden. Furthermore, CCT is regarded as an effective gatekeeper for coronary angiography, and carries independent important prognostic information. In the last decade, the introduction of new functional CCT applications, namely CCT perfusion (CCTP) imaging and CT-derived fractional flow reserve (FFR_CTA), has opened the door for accurate assessment of the haemodynamic significance of stenoses. These new CCT technologies, thus, share the unique advantage of assessing both myocardial ischemia and patient-specific coronary artery anatomy, providing an integrated anatomical/functional analysis. In the present review, starting from the pathophysiology of myocardial ischemia, we evaluate the existing evidence for functional CCT imaging and its value in relation to alternative, well-established, non-invasive imaging modalities and invasive indices of ischemia (currently the gold-standard). The knowledge of clinical applications, benefits, and limitations of these new CCT technologies will allow efficient and optimal use in clinical practice in the near future.

The value of coronary computed tomography angiography in assessing the cardiac circulation of an outpatient-based population

To evaluate the perfusion of coronary circulation and its related factors and the difference in the peak filling times in aortic sinus and coronary sinus by coronary computed tomography angiography (CCTA).From January 1 to August 1, 2018, 61 outpatients with angina pectoris were recruited, completed a questionnaire about risk factors and underwent CCTA, which was also used to assess the stenosis of different coronary artery segments.The duration of circulation was 9.50 ± 2.43 seconds in patients with flat T wave, which was shorter than the duration in normal subjects (P = .021). However, other cardiovascular risk factors showed no effect on the duration of circulation. In addition, the duration of circulation was closely related to the peak filling time of coronary sinus [r(s) = 0.681]. We further divided the circulation time difference (delta) values into 3 levels (<6, 6-12, and ≥12 seconds).It showed that the circulation duration (Y) was associated with:Therefore, the cardiac circulation duration was negatively related to the degree of stenosis in the 1 diagonal and proximal LCA.It compensates for the inability of CCTA to assess circulation at rest simply by determining the peak filling time in the aortic sinus and the coronary sinus. Moderate cardiac microcirculation duration was related to a low incidence of clinical symptoms and electrocardiogram disorders, which was determined mainly by the diagonal and left circumflex branch 1 of LCA.

[Advancement of imaging technology for coronary microcirculation dysfunction assessment]

Coronary microcirculation dysfunction (CMVD) is an important risk factor for the prognosis of re-perfused ischemic heart. Recent studies showed that the evaluation of CMVD has significant impact on both the early diagnosis of heart diseases relevant to blood supply and prognosis after myocardial reperfusion. In this review, the definition of CMVD from the perspective of pathophysiology was clarified, the principles and features of the state-of-the-art imaging technologies for CMVD assessment were reviewed from the perspective of engineering and the further research direction was promoted.

Bone marrow adipose tissue is a unique adipose subtype with distinct roles in glucose homeostasis

Bone marrow adipose tissue (BMAT) comprises >10% of total adipose mass, yet unlike white or brown adipose tissues (WAT or BAT) its metabolic functions remain unclear. Herein, we address this critical gap in knowledge. Our transcriptomic analyses revealed that BMAT is distinct from WAT and BAT, with altered glucose metabolism and decreased insulin responsiveness. We therefore tested these functions in mice and humans using positron emission tomography-computed tomography (PET/CT) with ¹⁸F-fluorodeoxyglucose. This revealed that BMAT resists insulin- and cold-stimulated glucose uptake, while further in vivo studies showed that, compared to WAT, BMAT resists insulin-stimulated Akt phosphorylation. Thus, BMAT is functionally distinct from WAT and BAT. However, in humans basal glucose uptake in BMAT is greater than in axial bones or subcutaneous WAT and can be greater than that in skeletal muscle, underscoring the potential of BMAT to influence systemic glucose homeostasis. These PET/CT studies characterise BMAT function in vivo, establish new methods for BMAT analysis, and identify BMAT as a distinct, major adipose tissue subtype.

Clinical quantitative cardiac imaging for the assessment of myocardial ischaemia

Cardiac imaging has a pivotal role in the prevention, diagnosis and treatment of ischaemic heart disease. SPECT is most commonly used for clinical myocardial perfusion imaging, whereas PET is the clinical reference standard for the quantification of myocardial perfusion. MRI does not involve exposure to ionizing radiation, similar to echocardiography, which can be performed at the bedside. CT perfusion imaging is not frequently used but CT offers coronary angiography data, and invasive catheter-based methods can measure coronary flow and pressure. Technical improvements to the quantification of pathophysiological parameters of myocardial ischaemia can be achieved. Clinical consensus recommendations on the appropriateness of each technique were derived following a European quantitative cardiac imaging meeting and using a real-time Delphi process. SPECT using new detectors allows the quantification of myocardial blood flow and is now also suited to patients with a high BMI. PET is well suited to patients with multivessel disease to confirm or exclude balanced ischaemia. MRI allows the evaluation of patients with complex disease who would benefit from imaging of function and fibrosis in addition to perfusion. Echocardiography remains the preferred technique for assessing ischaemia in bedside situations, whereas CT has the greatest value for combined quantification of stenosis and characterization of atherosclerosis in relation to myocardial ischaemia. In patients with a high probability of needing invasive treatment, invasive coronary flow and pressure measurement is well suited to guide treatment decisions. In this Consensus Statement, we summarize the strengths and weaknesses as well as the future technological potential of each imaging modality.

Coronary circulation: Pressure/flow parameters for assessment of ischemic heart disease

Both invasive and non-invasive parameters have been reported for assessment of the physiological status of the coronary circulation. Fractional flow reserve and coronary (or myocardial) flow reserve may be obtained by invasive or non-invasive means. These metrics of coronary stenosis severity have achieved wide clinical acceptance for guiding revascularization decisions and risk stratification. Other indices are obtained invasively (e.g., instantaneous wave-free ratio, iFR; hyperemic stenosis resistance) or non-invasively (e.g., PET absolute myocardial blood flow (mL/min/g)) and have been used for the same purposes. Both iFR, and whole-cycle distal coronary to aortic mean pressure (Pd/Pa) are measured under basal condition and used for assessment of hemodynamic stenosis severity as is index of basal stenosis resistance (BSR). These metrics typically are dichotomized at an empirically derived cut point into "normal" and "abnormal" categories for purposes of clinical decision making and data analysis. Once dichotomized the indices do not always point in the same direction and so confusion may arise. This review, therefore, will present basic principles relevant to understanding commonly employed metrics of the physiological status of the coronary circulation, potential strengths and weaknesses, and hopefully an improved appreciation of the clinical information provided by each.

Quantification of PET Myocardial Blood Flow

PURPOSE OF REVIEW

The aim of this review is to provide an update on quantification of myocardial blood flow (MBF) with positron emission tomography (PET) imaging. Technical and clinical aspects of flow quantification with PET are reviewed.

RECENT FINDINGS

The diagnostic and prognostic values of myocardial flow quantification have been established in numerous studies and in various populations. MBF quantification has also shown itself to be particularly useful in the assessment of coronary microvascular dysfunction and in evaluation of cardiac allograft vasculopathy. Overall, myocardial flow reserve (MFR) and hyperemic MBF can lead to improved risk stratification by providing information complementary to that of other markers of disease severity, such as fractional flow reserve. Flow quantification enhances MPI's ability to detect both significant epicardial disease and microvascular dysfunction. With recent technological and methodological advances, flow quantification with PET is no longer restricted to cyclotron-equipped academic centers.

Production of 15O for Medical Applications via the 16O(γ,n)15O Reaction

¹⁵O (half-life, 122 s) is a useful radionuclide for PET applications. Current production of ¹⁵O typically makes use of the ¹⁴N(d,n)¹⁵O, ¹⁵N(p,n)¹⁵O, or ¹⁶O(p,pn)¹⁵O reactions using an accelerator. A novel approach for the production of ¹⁵O is via the ¹⁶O(γ,n)¹⁵O reaction using an electron linear accelerator. Photonuclear reactions using an electron linear accelerator may allow for feasible and economical production of ¹⁵O compared with the current methods. Methods: In this work, experiments using a repurposed Clinac were conducted using oxygen-containing alumina as a target material to study the production rate of ¹⁵O. Additional studies were conducted using a water target cell. Simulations using Geant4 were conducted to predict the activity and power dissipation in the target. Results: Bremsstrahlung radiation from the electron beam, and consequently ¹⁵O production via photonuclear reactions, is enhanced when a high-Z material, tungsten, is placed in front of the target. The alumina irradiations provided preliminary data to optimize the beam parameters and target configuration. The optimal thickness of tungsten was 1.4 mm for both the simulated and the measured studies of alumina. Simulations of irradiated water targets showed that tungsten thicker than 1.4 mm resulted in fewer photons available to activate the water; thus, a higher current was required to achieve a fixed dose. Alternatively, for a constant tungsten thickness, more power was deposited in the target with increasing beam energy, requiring a lower current to achieve a fixed dose. Actual irradiations of a water target yielded a quantity of ¹⁵O in the water that was consistent with expectations based on irradiations of alumina. Conclusion: Several parameters should be considered regarding the photonuclear production of ¹⁵O for an average patient dose of 1,850 MBq (50 mCi) in 10 mL. This work illustrates a variety of machine parameters capable of achieving a reasonable patient dose. Our simulations show that the power deposited in the target for these parameters is less than that in commercially operated cyclotron targets for the production of ¹⁸F. Thus, this work demonstrates that the photonuclear production of ¹⁵O may be a new production path for this useful radionuclide.

15-O-water myocardial flow reserve PET and CT angiography by full hybrid PET/CT as a potential alternative to invasive angiography

Combined myocardial flow reserve (MFR) by PET and CT coronary angiography (CTA) is a promising tool for assessment of coronary artery disease. Prior analyses of MFR/CTA has been performed as side-by-side interpretation, not as volume rendered, full hybrid analysis, with fused MFR/CTA. We aimed to: (i) establish a method for full hybrid analysis of MFR/CTA, (ii) validate the inter- and intra-observer reproducibility of MFR values, and (iii) determine the diagnostic value of side-by-side versus full hybrid MFR/CTA with 15-O-water PET. Forty-four outpatients scheduled for invasive coronary angiography (ICA) were enrolled prospectively. All underwent rest/stress 15-O-water PET/CTA with ICA as reference. Within two observers of different experience, the Pearson r at global and territorial level exceeded 0.953 for rest, stress, and MFR values, as determined by Carimas software. Within and between observers, the mean differences between rest, stress, and MFR values were close to zero and the confidence intervals for 95% limits of agreement were narrow. The diagnostic performance of full hybrid PET/CTA did not outperform the side-by-side approach, but performed better than MFR without CTA at vessel level: specificity 93% (95% confidence limits: 89-97%) versus 76% (64-88%), p = 0.0004; positive predictive value 71% (55-86%) versus 51% (37-65%), p = 0.0001; accuracy 90% (84-95%) versus 77% (69-84%), p = 0.0009. MFR showed high reproducibility within and between observers of different experience. The full hybrid model was not superior to side-by-side interpretation of MFR/CTA, but proved better than MFR alone at vessel level with regard to specificity, positive predictive value, and accuracy.

Multimodality quantitative assessments of myocardial perfusion using dynamic contrast enhanced magnetic resonance and 15O-labelled water positron emission tomography imaging

Kinetic modelling of myocardial perfusion imaging data allows the absolute quantification of myocardial blood flow (MBF) and can improve the diagnosis and clinical assessment of coronary artery disease (CAD). Positron emission tomography (PET) imaging is considered the reference standard technique for absolute quantification, whilst oxygen-15 (¹⁵O)-water has been extensively implemented for MBF quantification. Dynamic contrast enhanced magnetic resonance imaging (DCE-MRI) has also been used for MBF quantification and showed comparable diagnostic performance against (¹⁵O)-water PET studies. We investigated for the first time the diagnostic performance of two different PET MBF analysis softwares PMOD and Carimas, for obstructive CAD detection against invasive clinical standard methods in 20 patients with known or suspected CAD. Fermi and distributed parameter modelling-derived MBF quantification from DCE-MRI was also compared against (¹⁵O)-water PET, in a subgroup of 6 patients. The sensitivity and specificity for PMOD was significantly superior for obstructive CAD detection in both per vessel (0.83, 0.90) and per patient (0.86, 0.75) analysis, against Carimas (0.75, 0.65), (0.81, 0.70), respectively. We showed strong, significant correlations between MR and PET MBF quantifications (r=0.83-0.92). However, DP and PMOD analysis demonstrated comparable and higher haemodynamic differences between obstructive versus (no, minor or non)-obstructive CAD, against Fermi and Carimas analysis. Our MR method assessments against the optimum PET reference standard technique for perfusion analysis showed promising results in per segment level and can support further multi-modality assessments in larger patient cohorts. Further MR against PET assessments may help to determine their comparative diagnostic performance for obstructive CAD detection.