Is liver lesion characterisation by simplified IVIM DWI also feasible at 3.0 T?

Simplified intravoxel incoherent motion DWI for differentiating malignant from benign breast lesions

Background

To evaluate simplified intravoxel incoherent motion (IVIM) diffusion-weighted imaging (DWI) for differentiating malignant versus benign breast lesions as (i) stand-alone tool and (ii) add-on to dynamic contrast-enhanced magnetic resonance imaging.

Methods

1.5-T DWI data (b = 0, 50, 250, 800 s/mm²) were retrospectively analysed for 126 patients with malignant or benign breast lesions. Apparent diffusion coefficient (ADC) ADC (0, 800) and IVIM-based parameters D₁′ = ADC (50, 800), D₂′ = ADC (250, 800), f₁′ = f (0, 50, 800), f₂′ = f (0, 250, 800) and D*′ = D* (0, 50, 250, 800) were voxel-wise calculated without fitting procedures. Regions of interest were analysed in vital tumour and perfusion hot spots. Beside the single parameters, the combined use of D₁′ with f₁′ and D₂′ with f₂′ was evaluated. Lesion differentiation was investigated for lesions (i) with hyperintensity on DWI with b = 800 s/mm² (n = 191) and (ii) with suspicious contrast-enhancement (n = 135).

Results

All lesions with suspicious contrast-enhancement appeared also hyperintense on DWI with b = 800 s/mm². For task (i), best discrimination was reached for the combination of D₁′ and f₁′ using perfusion hot spot regions-of-interest (accuracy 93.7%), which was higher than that of ADC (86.9%, p = 0.003) and single IVIM parameters D₁′ (88.0%) and f₁′ (87.4%). For task (ii), best discrimination was reached for single parameter D₁′ using perfusion hot spot regions-of-interest (92.6%), which were slightly but not significantly better than that of ADC (91.1%) and D₂′ (88.1%). Adding f₁′ to D₁′ did not improve discrimination.

Conclusions

IVIM analysis yielded a higher accuracy than ADC. If stand-alone DWI is used, perfusion analysis is of special relevance.

Comparison of different ROI analysis methods for liver lesion characterization with simplified intravoxel incoherent motion (IVIM)

This study investigated the impact of different ROI placement and analysis methods on the diagnostic performance of simplified IVIM-DWI for differentiating liver lesions. 1.5/3.0-T DWI data from a respiratory-gated MRI sequence (b = 0, 50, 250, 800 s/mm²) were analyzed in patients with malignant (n = 74/54) and benign (n = 35/19) lesions. Apparent diffusion coefficient ADC = ADC(0,800) and IVIM parameters D₁' = ADC(50,800), D₂' = ADC(250,800), f₁' = f(0,50,800), f₂' = f(0,250,800), and D*' = D*(0,50,250,800) were calculated voxel-wise. For each lesion, a representative 2D-ROI, a 3D-ROI whole lesion, and a 3D-ROI from "good" slices were placed, including and excluding centrally deviating areas (CDA) if present, and analyzed with various histogram metrics. The diagnostic performance of 2D- and 3D-ROIs was not significantly different; e.g. AUC (ADC/D₁'/f₁') were 0.958/0.902/0.622 for 2D- and 0.942/0.892/0.712 for whole lesion 3D-ROIs excluding CDA at 1.5 T (p > 0.05). For 2D- and 3D-ROIs, AUC (ADC/D₁'/D₂') were significantly higher, when CDA were excluded. With CDA included, AUC (ADC/D₁'/D₂'/f₁'/D*') improved when low percentiles were used instead of averages, and was then comparable to the results of average ROI analysis excluding CDA. For lesion differentiation the use of a representative 2D-ROI is sufficient. CDA should be excluded from ROIs by hand or automatically using low percentiles of diffusion coefficients.

1.5 vs 3 Tesla Magnetic Resonance Imaging: A Review of Favorite Clinical Applications for Both Field Strengths-Part 1

ABSTRACT

Whole-body magnetic resonance imaging (MRI) systems with a field strength of 3 T have been offered by all leading manufacturers for approximately 2 decades and are increasingly used in clinical diagnostics despite higher costs. Technologically, MRI systems operating at 3 T have reached a high standard in recent years, as well as the 1.5-T devices that have been in use for a longer time. For modern MRI systems with 3 T, more complexity is required, especially for the magnet and the radiofrequency (RF) system (with multichannel transmission). Many clinical applications benefit greatly from the higher field strength due to the higher signal yield (eg, imaging of the brain or extremities), but there are also applications where the disadvantages of 3 T might outweigh the advantages (eg, lung imaging or examinations in the presence of implants). This review describes some technical features of modern 1.5-T and 3-T whole-body MRI systems, and reports on the experience of using both types of devices in different clinical settings, with all sections written by specialist radiologists in the respective fields.This first part of the review includes an overview of the general physicotechnical aspects of both field strengths and elaborates the special conditions of diffusion imaging. Many relevant aspects in the application areas of musculoskeletal imaging, abdominal imaging, and prostate diagnostics are discussed.

Simplified intravoxel incoherent motion diffusion-weighted MRI of liver lesions: feasibility of combined two-colour index maps

Background

To evaluate the feasibility of two-colour index maps containing combined diffusion and perfusion information from simplified intravoxel incoherent motion (IVIM) for liver lesion malignancy assessment.

Methods

Diffusion-weighted data from a respiratory-gated 1.5-T magnetic resonance sequence were analysed in 109 patients with liver lesions. With three b values (0, 50, 800 s/mm²) estimated diffusion coefficient D′, perfusion fraction f′, and apparent diffusion coefficient (ADC) maps were calculated and analysed for regions of interest (ROIs). D′ and f′ cutoff values were determined by differentiating haemangiomas from other lesions and focal nodular hyperplasias from other lesions, respectively. Combined I_Df index maps were generated with a voxel value set to 100, if both D′ and f′ voxel values were lower than their cutoff values (1,529.4 × 10^-6 mm²/s and 114.4 × 10^-3, respectively), otherwise to 0. Moreover, I_ADC index maps were generated from ADC cutoff value (1,338.5 × 10^-6 mm²/s) obtained by differentiating benign from malignant lesions. Discriminatory power was assessed for both I_Df and I_ADC. Index maps were displayed as two-colour overlays to b-800 images and visually assessed within the translucent hyperintense areas.

Results

For I_Df, the same diagnostic accuracy was achieved as for the combined use of parameters D′ and f′ (93.6%). Compared to I_ADC, I_Df showed a higher diagnostic accuracy. Visual judgment of I_Df yielded an accuracy (95.4%) similar to that of quantitative analysis (93.6%).

Conclusion

Voxel-wise combined two-colour index maps I_Df provide similar diagnostic accuracy as ROI-based combination of estimated IVIM parameters D′ and f′ and are suitable for visual assessment of liver lesion malignancy.

An optimized b-value distribution for triexponential intravoxel incoherent motion (IVIM) in the liver

PURPOSE

To find an optimized b-value distribution for reproducible triexponential intravoxel incoherent motion (IVIM) exams in the liver.

METHODS

A numeric optimization of b-value distributions was performed using the triexponential IVIM equation and 27 different IVIM parameter sets. Starting with an initially optimized distribution of 6 b-values, the number of b-values was increased stepwise. Each new b-value was chosen from a set of 64 predefined b-values based on the computed summed relative mean error of the fitted triexponential IVIM parameters. This process was repeated for up to 100 b-values. In simulations and in vivo measurements, optimized b-value distributions were compared to 4 representative distributions found in literature.

RESULTS

The first 16 optimized b-values were 0, 0.3, 0.3, 70, 200, 800, 70, 1, 3.5, 5, 70, 1.2, 6, 45, 1.5, and 60 in units of s/mm² . Low b-values were much more frequent than high b-values. The optimized b-value distribution resulted in a higher fit stability compared to distributions used in literature in both, simulation and in vivo measurements. Using more than 6 b-values, ideally 16 or more, increased the fit stability considerably.

CONCLUSION

Using optimized b-values, the fit uncertainty in triexponential IVIM can be largely reduced. Ideally, 16 or more b-values should be acquired.