Synthesis and characterization of mixed ternary transition metal ferrite nanoparticles comprising cobalt, copper and binary cobalt–copper for high-performance supercapacitor applications

Rare-earth (Eu3+) substitution impact on the structural, morphological, magneto-dielectric, and electrochemical properties of Cd0.45Co0.55Fe2-yEuyO4spinel nanoferrites

A series ofCd0.45Co0.55Fe2-yEuyO4(y= 0.0, 0.1, 0.2, 0.3) spinel nanoferrites (SNFs) were synthesized using a self-igniting process and employed as electrode materials for supercapacitor applications. The results demonstrated the formation of a single SNFs phase, as shown by the XRD data. The crystallite size lies between the range of 29.30-51.12 nm. The porosity percentage is within the range of 31.37%-32.99%. Rietveld refinement of XRD and Raman analysis revealed the pure spinel phase and no secondary phase was observed. The saturation magnetization and magnetic anisotropy were also decreased with the addition of Eu3+in Cd-Co SNFs. The high coercive field was enhanced for Eu3+doping as compared to pure Cd-Co SNFs. The dielectric constant was improved with the substitution of Eu3+in Cd-Co SNFs. The dielectric tangent loss was reduced with the doping of Eu3+. The electrochemical performance of the Eu3+doped Cd-Co SNFs achieved an impressive maximum specific capacitance at a lower scan rate. Based on these findings, the outstanding electrochemical performance of the Eu3+doped Cd-Co SNFs suggests their potential as promising materials for high-frequency, magnetic ferrofluid, and supercapacitor electrodes.

A Facile Glycerol-Assisted Synthesis of Low-Cu2+-Doped CoFe2O4 for Electrochemical Sensing of Acetaminophen

This work devised a simple glycerol-assisted synthesis of a low-Cu2+-doped CoFe2O4 and the electrochemical detection of acetaminophen (AC). During the synthesis, several polyalcohols were tested, indicating the efficiency of glycerin as a cosolvent, aiding in the creation of electrode-modifier nanomaterials. A duration of standing time (eight hours) before calcination produces a decrease in the secondary phase of hematite. The synthesized material was used as an electrode material in the detection of AC. In acidic conditions (pH 2.5), the limit of detection (LOD) was 99.4 nM, while the limit of quantification (LOQ) was found to be (331 nM). The relative standard deviation (RSD), 3.31%, was computed. The enhanced electrocatalytic activity of a low-Cu2+-doped CoFe2O4-modified electrode Cu0.13Co0.87Fe2O4/GCE corresponds extremely well with its resistance Rct, which was determined using the electrochemical impedance spectroscopy (EIS) technique and defined its electron transfer capacity. The possibility of a low-Cu2+-doped CoFe2O4 for the electrochemical sensing of AC in human urine samples was studied. The recovery rates ranging from 96.5 to 101.0% were obtained. These findings suggested that the Cu0.13Co0.87Fe2O4/GCE sensor has outstanding practicability and could be utilized to detect AC content in real complex biological samples.

Insight into TEMPO-oxidized cellulose-based composites as electrochemical sensors for dopamine assessment

The diagnosis and treatment of many neurological and psychiatric problems depend on establishing simple, inexpensive, and comfortable electrochemical sensors for dopamine (DA) detection. Herein, 2,2,6,6 tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOC) were successfully loaded with silver nanoparticles (AgNPs) and/or graphite (Gr) and crosslinked by tannic acid, producing composites. This study describes a suitable casting procedure for the composite synthesis of TOC/AgNPs and/or Gr for the electrochemical detection of dopamine. Electrochemical impedance spectra (EIS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to characterize the TOC/AgNPs/Gr composites. In addition, the direct electrochemistry of electrodes treated with the prepared composites was examined using cyclic voltammetry. The TOC/AgNPs/Gr composite-modified electrode improved electrochemical performance towards detecting dopamine compared to TOC/Gr-modified electrodes. Upon employing amperometric measurement, our electrochemical instrument has a wide linear range (0.005-250 μM), a low limit of detection (0.0005 μM) at S/N = 3, and a high sensitivity (0.963 μA μM^-1 cm^-2). Additionally, it was demonstrated that DA detection seemed to have outstanding anti-interference characteristics. The proposed electrochemical sensors meet the clinical criteria regarding reproducibility, selectivity, stability, and recovery. The straightforward electrochemical method utilized in this paper may provide a potential framework for creating dopamine quantification biosensors.

High performance hydrogel electrodes based on sodium alginate-g-poly(AM-c o-ECA-co-AMPS for supercapacitor application

Electrochemical conductive hydrogels are being extensively explored in the fabrication of portable batteries and high-performance supercapacitors. Herein, the rational design of a new polyanionic electrically conductive hydrogels based on sodium alginate-g-poly(AM-co-ECA-co-AMPS) are described. rGO was incorporated into the hydrogel during the polymerization process generating rGO@ sodium alginate-g-poly(AM-co-ECA-co-AMPS) composite hydrogels to study the impact of rGO on the performance of the hydrogels. FT-IR, XRD, and SEM-EDX characterized the chemical composition, crystalline, and morphological structure of the new synthesized hydrogels. The electrochemical performance of as-synthesized hydrogels was investigated by cyclic voltammetry, galvanostatic, charge-discharge rate, and electrochemical impedance spectroscopy. The supercapacitor performance for ECH2.5 composite hydrogel showed a capacitance of 753 F. g^-1 at 1 A. g^-1 with good rate capability and cycling stability up to 5000 cycles. Thus, ECH2.5 hydrogel is a good candidate as electrode material in supercapacitor applications.