Co-gelation mechanism of xanthan and galactomannan

New insight into synergistic interaction between the backbone or side chain of xanthan gum and the backbone of Gleditsia sinensis polysaccharide

In this study, the synergistic effect and weak gel mechanism of XG and Gleditsia sinensis polysaccharide (GSP) in different ratios were studied through the rheological properties, microstructure and molecular simulation based on density functional theory (DFT). The results of rheological properties showed that the mixtures formed a weak gel at the concentration of 0.5 % (w/v), with the synergistic impact peaking at a XG/GSP ratio of 3:7. Weak gels produced by XG and GSP had the intersection of G' and G" within the temperature sweep range, and the largest change in the G' slope at a XG/GSP ratio of 3:7. By calculating the interaction energy, it was found that the backbone of XG was more likely to interact with the backbone of GSP. Furthermore, the XG mainchain intersected with the backbone of GSP in a cross shape ("X" shape). As a result, this paper proposed a possible mechanism for the formation of the XG/GSP weak gel, with XG as the main chain and GSP as the grid point, and the main interaction type being hydrogen bonding, with the van der Waals force also involved. The results provide new insight for designing and producing physical gels with specific interactions in food industry.

Rheological Properties and Kinetics of Gelation of Binary Polymers between Xanthan Gum and Locust Bean Gum

The synergistic interaction and gelling kinetics between xanthan gum (XG) and locust bean gum (LBG) at different mass ratios (XG/LBG 9:1, 7:3, 5:5, 3:7, 1:9) were investigated using a rheometer. The results showed that the mixtures of XG and LBG induced gel formation, and the strongest gel structure was found for the mixture of XG/LBG 3:7 according to the yield stress, storage modulus (G'), and power law parameters. Temperature ramp studies indicated that heating destroyed the gels at 55~60 °C, while cooling induced the sol-gel transition at around 52 °C for all mixtures. Structure developing rate (SDR) curves showed that XG/LBG 3:7 exhibited the highest SDR during the cooling ramp among all the samples. Non-isothermal kinetic analysis demonstrated that the gelation process of XG/LBG mixtures during cooling included two steps: a high-temperature region (55~39 °C) needing higher activation energy (Ea, 111.97 to 199.20 kJ/mol for different mixtures) and a low-temperature region (39~20 °C) needing lower Ea (74.33 to 85.31 kJ/mol), which indicated higher energy barriers to overcome at the initial stage of gel formation. The lowest Ea of 74.33 kJ/mol was found for XG/LBG 3:7 in the low-temperature region. Scanning electron microscopy (SEM) showed that the gel of XG/LBG 3:7 presented the densest entanglements. These results indicated the strongest synergism interaction occurred in XG/LBG 3:7 to form gel network structures. This study will help promote the application of XG-LBG blends to design novel food structures.

Changes in structure and physicochemical properties of Sophora japonica f. pendula galactomannan in late growth stage

Galactomannan (GM) has been widely applied in food and other fields due to its appealing physicochemical properties. In this work, considering the changes in structural and physicochemical properties of Sophora japonica f. pendula (SJ-GM) with very high mannose to galactose (M/G) ratio in the late deposition stage, extensive exploration is conducted. The core of structural change is the change of M/G ratio (4.94-5.68), which is caused by the loss of galactose side residues modulated by α-d-galactosidase during seed maturation. Afterwards, the more compact conformation, the higher molecular weight, the increased hydrophobicity, and the greater solution viscosity of SJ-GM can be caused. Notably, the gel strength of SJ-GM with the highest M/G surpasses other GMs, including fenugreek gum (M/G = 1.20), guar gum (M/G = 1.80), Gleditsia microphylla gum (M/G = 2.77), and LBG (M/G = 4.00). Finally, SJ-GM is proven to be an attractive alternative to other GMs.

Insights into interaction mechanism between xanthan gum and galactomannan based on density functional theory and rheological properties

To explore the interaction sites and energies of ordered and disordered xanthan gum with locust bean gum (LBG), we prepared xanthan with different conformations and used it to form synergistic complexes with LBG. The interaction strength between xanthan and LBG was analyzed by analog computation using the density functional theory (DFT) method. Furthermore, the viscoelastic changes of the xanthan-LBG complex in different solutions were analyzed to verify the DFT results. The results showed that the ordered xanthan interacted with LBG through the side chains, with an interaction energy (E_Int) of -479.450 kcal/mol. On the other hand, the disordered xanthan and LBG formed gels through backbone-to-backbone interactions, with an E_Int of -262.290 kcal/mol. Overall, the study provides insights into xanthan-galactomannan gel formation and a theoretical basis for the broader application of xanthan.

Improved Stabilization and In Vitro Digestibility of Mulberry Anthocyanins by Double Emulsion with Pea Protein Isolate and Xanthan Gum

There is significant evidence that double emulsion has great potential for successfully encapsulating anthocyanins. However, few research studies are currently using a protein-polysaccharide mixture as a stable emulsifier for double emulsion. This study aimed to improve the stability and in vitro digestibility of mulberry anthocyanins (MAs) by employing a double emulsion composed of pea protein isolate (PPI) and xanthan gum (XG). The influence of various XG concentrations (0%, 0.2%, 0.4%, 0.6%, 0.8%, 1.0%) and different temperatures (5 °C, 25 °C, 45 °C, 65 °C) on the physical stability and the thermal degradation of MAs from double emulsions were investigated. In addition, the physicochemical properties of double emulsions and the release performance of MAs during in vitro simulated digestion were evaluated. It was determined that the double emulsion possessed the most stable physical characteristics with the 1% XG addition. The PPI-1% XG double emulsion, when compared to the PPI-only double emulsion, expressed higher thermal stability with a retention rate of 83.19 ± 0.67% and a half-life of 78.07 ± 4.72 days. Furthermore, the results of in vitro simulated digestion demonstrated that the MAs in the PPI-1% XG double emulsion were well-protected at oral and gastric with ample release found in the intestine, which was dissimilar to findings for the PPI-only double emulsion. Ultimately, it was concluded that the double emulsion constructed by the protein-polysaccharide system is a quality alternative for improving stability and absorption with applicability to a variety of food and beverage systems.

Locust Bean Gum, a Vegetable Hydrocolloid with Industrial and Biopharmaceutical Applications

Locust bean gum (LBG), a vegetable galactomannan extracted from carob tree seeds, is extensively used in the food industry as a thickening agent (E410). Its molecular conformation in aqueous solutions determines its solubility and rheological performance. LBG is an interesting polysaccharide also because of its synergistic behavior with other biopolymers (xanthan gum, carrageenan, etc.). In addition, this hydrocolloid is easily modified by derivatization or crosslinking. These LBG-related products, besides their applications in the food industry, can be used as encapsulation and drug delivery devices, packaging materials, batteries, and catalyst supports, among other biopharmaceutical and industrial uses. As the new derivatized or crosslinked polymers based on LBG are mainly biodegradable and non-toxic, the use of this polysaccharide (by itself or combined with other biopolymers) will contribute to generating greener products, considering the origin of raw materials used, the modification procedures selected and the final destination of the products.

Evaluation of thickened liquid viscoelasticity for a swallowing process using an inclined flow channel instrument

An inclined flow channel instrument that can be developed to be a structurally simple and easy-to-use rheometer was applied to control the thickness, specifically the viscosity and elasticity, of liquids thickened to support swallowing in nursing-care practice. Aqueous solutions containing salt or acid, which might be used as ingredients in drinks, were thickened with a commercial thickener. The thickener efficacy decreased because of the salt or acid in liquid phase. Analysis of the flows in the instrument by experimentation yielded a dimensionless relation representing changes of the Deborah number in the flow process, as indicated by the relative flow length, considering the shear rate in oral processing. One unique methodology to evaluate the viscoelasticities of thickened liquids during the swallowing process was presented utilizing the measurements such as elapsed time and velocity in the instrument.

Tea polyphenols encapsulated in W/O/W emulsions with xanthan gum-locust bean gum mixture: Evaluation of their stability and protection

Herein, improvement of the stability of the water-in-oil-in-water (W/O/W) emulsions by addition of xanthan gum (XG)/locust bean gum (LBG) mixture in the inner water phase was aimed. The impact of XG/LBG mixture on the physical stability, microstructure and rheological properties of W/O/W emulsions was investigated. It was found that, compared with the control emulsions, the presence of XG/LBG mixture could improve the stability of W/O/W emulsions against coalescence. The tea polyphenols (TPPs) and XG/LBG mixture were simultaneously included in the internal aqueous phase of the double emulsion and stored at 25 and 40 °C in the dark for 28 d. The results showed that XG/LBG mixture not only had a protective role for TPPs encapsulated in the internal water phase, but also maintained more than 50% of the antioxidant capacity of TPPs.

Stability of lutein in O/W emulsion prepared using xanthan and propylene glycol alginate

Lutein is a hydrophobic carotenoid with diverse bioactivities. For encapsulating the molecule in a novel method, we prepared two emulsions from xanthan and propylene glycol alginate at the ratios of 3:7 and 4:6. The instability index and particle size of the emulsions were determined using a stability analyzer and laser particle size analyzer. The influence of crystallization on the emulsions was observed under a polarizing microscope. The effects of centrifugal force and storage on the lutein emulsions were analyzed by measuring the changes in absorbance. The results showed that the emulsion fabricated by xanthan and propylene glycol alginate at the ratio of 4:6 was highly stable, and crystals were dispersed when xanthan and propylene glycol alginate existed. These results revealed that the hydrophobicity and absorption kinetics of emulsifiers would determine the stability of emulsion when the viscosity of emulsifiers reached a certain value, and the stability of emulsions would affect the stability of lutein in the emulsions.

Understanding the physics of hydrocolloids interaction using rheological, thermodynamic and functional properties: A case study on xanthan gum-cress seed gum blend

Some rheological, thermodynamic and functional properties of selected hydrocolloids (xanthan gum-cress seed gum (XG-CSG)) blends at different ratios (1-0, 3-1, 1-1, 1-3, 0-1) were characterized to understand physically the biopolymers interaction and networks. XG showed a greater rigidity (elastic modulus, G'_LVE = 58.60 Pa), total structural strength (complex modulus, G*_LVE = 70.69 Pa), yield stress (limiting value of stress, τ_L = 7.58 Pa), emulsion capacity (EC = 6.78%) and foam stability (FC = 18.92%) than CSG (G'_LVE = 7.05 Pa, G*_LVE = 8.53 Pa, τ_L = 1.44 Pa, EC = 86.48% and FC = 14.98%), respectively. Among blends, 3-1 XG-CSG showed the highest G*_LVE, foaming stability (FS) and the extent of recovery (R_r%). The results were summarized using the clustering technique and principal component analyses. The coefficient of the interaction of some parameters, Cole-Cole plots and Gibbs free energy changes (ΔG) of predisturbed and intact networks were investigated. In samples with an intact network, greater compatibility directly related to the extent of synergistic interaction, while in predisturbed samples, the lower compatibility directly related to the extent of synergistic interaction. Although all blends were highly incompatible with antagonistic behavior, 1-1 XG-CSG showed the lowest incompatibility (ΔG = 8028.60 J/mol) among samples with intact structure, while at disrupted state, 1-3 XG-CSG showed the lowest incompatibility (ΔG = 158.6 J/mol).

Oxidized Xanthan Gum and Chitosan as Natural Adhesives for Cork

Natural cork stopper manufacturing produces a significant amount of cork waste, which is granulated and combined with synthetic glues for use in a wide range of applications. There is a high demand for using biosourced polymers in these composite materials. In this study, xanthan gum (XG) and chitosan (CS) were investigated as possible natural binders for cork. Xanthan gum was oxidized at two different aldehyde contents as a strategy to improve its water resistance. This modification was studied in detail by ¹H and ¹³C nuclear magnetic resonance (NMR), and the degree of oxidation was determined by the hydroxylamine hydrochloride titration method. The performance of the adhesives was studied by tensile tests and total soluble matter (TSM) determinations. Xanthan gum showed no water resistance, contrary to oxidized xanthan gum and chitosan. It is hypothesized that the good performance of oxidized xanthan gum is due to the reaction of aldehyde groups—formed in the oxidation process—with hydroxyl groups on the cork surface during the high temperature drying. Combining oxidized xanthan gum with chitosan did not yield significant improvements.

High internal phase emulsion gels (HIPE-gels) prepared using food-grade components

We report a new approach of using dispersed water phase gelation as a mode to create oil continuous emulsion gels. Low temperature gelation property of synergistic hydrocolloid combinations was exploited to develop elastic soft solids using only food-grade components.