Effects of ionic strength on the size and compactness of chitosan nanoparticles

Exploring the antimicrobial potential of chitosan nanoparticles: synthesis, characterization and impact on Pseudomonas aeruginosa virulence factors

The escalating antibiotic resistance observed in bacteria poses a significant threat to society, with the global prevalence of resistant strains of Pseudomonas aeruginosa on the rise. Addressing this challenge necessitates exploring strategies that would complement existing antimicrobial agents, e.g. by substances mitigating bacterial virulence without eliciting selective pressure for resistance emergence. In this respect, free-form chitosan has demonstrated promising efficacy, prompting our investigation into reinforcing its effects through nanoparticle formulations. Our study focuses on the preparation of chitosan nanoparticles under suitable conditions while emphasizing the challenges associated with stability that can affect biological activity. These challenges are mitigated by introducing quaternized chitosan, which ensures colloidal stability in the culture media. Our approach led to the production of trimethylchitosan nanoparticles with a median size of 103 nm, circularity of 0.967, and a charge of 14.9 ± 3.1 mV, stable within a one-month period in a water stock solution, showing promising attributes for further valorization. Furthermore, the study delves into the antimicrobial activity of trimethylchitosan nanoparticles on Pseudomonas aeruginosa and confirms the benefits of both nanoformulation and modification of chitosan, as our prepared nanoparticles inhibit 50% of the bacterial population at concentration ≥160 mg L-1 within tested strains. Additionally, we identified a concentration of 5 mg L-1 that no longer impedes bacterial growth, allowing reliable verification of the effect of the prepared nanoparticles on Pseudomonas aeruginosa virulence factors, including motility, protease activity, hemolytic activity, rhamnolipids, pyocyanin, and biofilm production. Although trimethylchitosan nanoparticles exhibit promise as an effective antibiofilm agent (reducing biofilm development by 50% at concentrations ranging from 80 to 160 mg L-1) their impact on virulence manifestation is likely not directly associated with quorum sensing. Instead, it can probably be attributed to non-specific interactions with the bacterial surface. This exploration provides valuable insights into the potential of quaternized chitosan nanoparticles in addressing Pseudomonas aeruginosa infections and underscores the multifaceted nature of their antimicrobial effects.

Progress and prospects of polysaccharide-based nanocarriers for oral delivery of proteins/peptides

The oral route has long been recognized as the most preferred route for drug delivery as it offers high patient compliance and requires minimal expertise. Unlike small molecule drugs, the harsh environment of the gastrointestinal tract and low permeability across the intestinal epithelium make oral delivery extremely ineffective for macromolecules. Accordingly, delivery systems that are rationally constructed with suitable materials to overcome barriers to oral delivery are exceptionally promising. Among the most ideal materials are polysaccharides. Depending on the interaction between polysaccharides and proteins, the thermodynamic loading and release of proteins in the aqueous phase can be realized. Specific polysaccharides (dextran, chitosan, alginate, cellulose, etc.) endow systems with functional properties, including muco-adhesiveness, pH-responsiveness, and prevention of enzymatic degradation. Furthermore, multiple groups in polysaccharides can be modified, which gives them a variety of properties and enables them to suit specific needs. This review provides an overview of different types of polysaccharide-based nanocarriers based on different kinds of interaction forces and the influencing factors in the construction of polysaccharide-based nanocarriers. Strategies of polysaccharide-based nanocarriers to improve the bioavailability of orally administered proteins/peptides were described. Additionally, current restrictions and future trends of polysaccharide-based nanocarriers for oral delivery of proteins/peptides were also covered.

Chitosan Nanoparticles-Preparation, Characterization and Their Combination with Ginkgo biloba Extract in Preliminary In Vitro Studies

Nanoparticles (NPs), due to their size, have a key position in nanotechnology as a spectrum of solutions in medicine. NPs improve the ability of active substances to penetrate various routes: transdermal, but also digestive (active endocytosis), respiratory and injection. Chitosan, an N-deacetylated derivative of chitin, is a natural biodegradable cationic polymer with antioxidant, anti-inflammatory and antimicrobial properties. Cross-linked chitosan is an excellent matrix for the production of nanoparticles containing active substances, e.g., the Ginkgo biloba extract (GBE). Chitosan nanoparticles with the Ginkgo biloba extract (GBE) were obtained by ion gelation using TPP as a cross-linking agent. The obtained product was characterized in terms of morphology and size based on SEM and Zeta Sizer analyses as well as an effective encapsulation of GBE in nanoparticles-FTIR-ATR and UV-Vis analyses. The kinetics of release of the active substance in water and physiological saline were checked. Biological studies were carried out on normal and cancer cell lines to check the cytotoxic effect of GBE, chitosan nanoparticles and a combination of the chitosan nanoparticles with GBE. The obtained nanoparticles contained and released GBE encapsulated in research media. Pure NPs, GBE and a combination of NPs and the extract showed cytotoxicity against tumor cells, with no cytotoxicity against the physiological cell line.

A Simple Method for Synthesis of Chitosan Nanoparticles with Ionic Gelation and Homogenization

Chitosan nanoparticles (CNPs) are known to have great utility in many fields (pharmaceutical, agricultural, food industry, wastewater treatment, etc.). In this study we aimed to synthesize sub-100 nm CNPs as a precursor of new biopolymer-based virus surrogates for water applications. We present a simple yet efficient synthesis procedure for obtaining high yield, monodisperse CNPs with size 68-77 nm. The CNPs were synthesized by ionic gelation using low molecular weight chitosan (deacetylation 75-85%) and tripolyphosphate as crosslinker, under rigorous homogenization to decrease size and increase uniformity, and purified by passing through 0.1 μm polyethersulfone syringe filters. The CNPs were characterized using dynamic light scattering, tunable resistive pulse sensing, and scanning electron microscopy. We demonstrate reproducibility of this method at two separate facilities. The effects of pH, ionic strength and three different purification methods on the size and polydispersity of CNP formation were examined. Larger CNPs (95-219) were produced under ionic strength and pH controls, and when purified using ultracentrifugation or size exclusion chromatography. Smaller CNPs (68-77 nm) were formulated using homogenization and filtration, and could readily interact with negatively charge proteins and DNA, making them an ideal precursor for the development of DNA-labelled, protein-coated virus surrogates for environmental water applications.

The synergistic effect of using bacteriophages and chitosan nanoparticles against pathogenic bacteria as a novel therapeutic approach

Public health and environmental security are seriously at risk due to the growing contamination of pathogenic microorganisms. Therefore, effective antimicrobials are urgently needed. In our study, the antimicrobial effects of three types of nanoparticles were investigated with phage. The biosynthesis of nanoparticles was confirmed based on the color change and shapes, which tended to be mono-dispersed with a spherical shape with a size range of 20-35 nm for Ag-CS-NPs; 15-30 nm for Phage-CS-NPs (Ph-CS-NPs); and 5-35 nm for Propolis-CS-NPs (Pro-CS-NPs). Nanoparticles displayed peaks between 380-420 nm, 335-380 nm, and below 335 nm for Ag-CS-NPs, Pro-CS-NPs, and Ph-CS NPs, respectively. Throughout the three synthesized nanoparticles, AgCs NPs represented a higher antibacterial effect in combination with phages. It showed MIC against S. sciuri, S. Typhimurium, and P. aeruginosa between 31.2 and 62.2 μg/mL and MBC at 500, 62.5, and 31.2 μg/mL, respectively, while in combination with phages showed MIC at 62.2, 31.2, and 15.6 μg/mL, respectively and MBC at 125, 62.2, and 15.6 μg/mL, respectively. Furthermore, a significant killing efficiency was observed with 16.5-30.1 μg/mL of Ag-CS NPs combined with phages. In conclusion, Ag-CS-NPs with phages present potential bactericidal and inhibitory effects against Gram-positive and Gram-negative bacteria, as well as against the production of biofilms.

Physicochemical, Thermal, and Morphological Properties of Chitosan Nanoparticles Produced by Ionic Gelation

Chitosan nanoparticles (CSNPs) can be widely used in the food, pharmaceutical, and cosmetic sectors due to their high performance, unique properties, and high surface area. In this research, CSNPs were produced by the ionic gelation method and using sodium tripolyphosphate (STPP) as an appropriate technique compared to the conventional methods. To evaluate the effects of various factors on the size, zeta potential (ZP), and optimal synthesis conditions, different concentrations of CS (1, 3, and 5 mg/mL), STPP (0.5, 0.75, and 1 mg/mL), and CS to STPP ratio (1:1, 3:1, and 5:1) were applied and optimized using the response surface methodology. The size of CSNPs was increased by using higher concentrations of CS, STPP, and CS/STPP ratios. The value of ZP was determined positive and it increased with increasing CS concentrations and CS/STPP ratios. ATR-FTIR spectra revealed interactions between CS and STPP. The DSC thermogram of CSNPs showed a double sharp endothermic peak at about 74.5 °C (ΔH = 122.00 J/g); further, the TGA thermograms indicated the total weight loss of STPP, CS, and CSNPs as nearly 3.30%, 63.60%, and 52.00%, respectively. The XRD data also revealed a greater chain alignment in the CSNPs. Optimized, the CSNPs can be used as promising carriers for bioactive compounds where they also act as efficient stabilizers in Pickering emulsions.

The Antibacterial Activity of Egyptian Wasp Chitosan-Based Nanoparticles against Important Antibiotic-Resistant Pathogens

The current work discusses the production and characterization of new biodegradable nanoparticles for biomedical applications based on insect chitosan. Chitosan has numerous features due to the presence of primary amine groups in repeating units, such as antibacterial and anticancer activities. When polyanion tripolyphosphate is added to chitosan, it creates nanoparticles with higher antibacterial activity than the original chitosan. In this study, the ionic gelation technique was used to make wasp chitosan nanoparticles (WCSNPs) in which TEM and FTIR were used to investigate the physicochemical properties of the nanoparticles. In addition, the antibacterial activities of chitosan nanoparticles against extended-spectrum beta-lactamase (ESBL)- and carbapenemase-producing Klebsiella pneumoniae, Escherichia coli, and Pseudomonas aeruginosa were evaluated. The extracted wasp chitosan exhibited high solubility in acetic acid and met all standard criteria of all characterization testes for nanoparticles; the zeta potential indicated stable WCSNPs capable of binding to cellular membrane and increasing the cellular uptake. The produced WCSNPs showed growth inhibition activity against all tested strains, and the bacterial count was lower than the initial count. The inhibition percent of WCSNPs showed that the lowest concentration of WCSNPs was found to be effective against tested strains. WCSNPs’ antibacterial activity implies that they could be used as novel, highly effective antibacterial agents in a variety of biological applications requiring antibacterial characteristics.

Monovalent ion-mediated charge-charge interactions drive aggregation of surface-functionalized gold nanoparticles

Monolayer-protected metal nanoparticles (NPs) are not only promising materials with a wide range of potential industrial and biological applications, but they are also a powerful tool to investigate the behaviour of matter at nanoscopic scales, including the stability of dispersions and colloidal systems. This stability is dependent on a delicate balance between attractive and repulsive interactions that occur in the solution, and it is described in quantitative terms by the classic Derjaguin-Landau-Vewey-Overbeek (DLVO) theory, that posits that aggregation between NPs is driven by van der Waals interactions and opposed by electrostatic interactions. To investigate the limits of this theory at the nanoscale, where the continuum assumptions required by the DLVO theory break down, here we investigate NP dimerization by computing the Potential of Mean Force (PMF) of this process using fully atomistic MD simulations. Serendipitously, we find that electrostatic interactions can lead to the formation of metastable NP dimers at physiological ion concentrations. These dimers are stabilized by complexes formed by negatively charged ligands belonging to distinct NPs that are bridged by positively charged monovalent ions present in solution. We validate our findings by collecting tomographic EM images of NPs in solution and by quantifying their radial distribution function, that shows a marked peak at interparticle distance comparable with that of MD simulations. Taken together, our results suggest that not only van der Waals interactions, but also electrostatic interactions mediated by monovalent ions at physiological concentrations, contribute to attraction between nano-sized charged objects at very short length scales.

Comparative study of cathepsin B-cleavable linkers for the optimal design of cathepsin B-specific doxorubicin prodrug nanoparticles for targeted cancer therapy

A carrier-free prodrug nanoparticle has emerged as a potential approach to cancer therapy. It plays a vital role in enhancing the tumor targeting and therapeutic efficacy of the anticancer agent at sites of intention wherein the prodrug nanoparticle is potentially activated. Herein, five derivatives of cathepsin B-cleavable prodrugs are synthesized via chemically conjugating different cathepsin B-cleavable peptides (Phe-Arg-Arg-Gly, Phe-Arg-Arg-Leu, Phe-Arg-Arg-Leu-Gly, Phe-Leu-Arg-Arg-Gly) to doxorubicin (DOX). The peptide-DOX prodrugs can spontaneously assemble into nanoparticles via their intermolecular hydrophobic and π-π stacking interactions. The resulting cathepsin B-cleavable prodrugs nanoparticles formed different nanoparticle structures according to the amphiphilicity and flexibility of different peptides and their particle stability and cellular uptake mechanism are carefully evaluated in vitro. Among five prodrug nanoparticles, the Phe-Arg-Arg-Leu-DOX (FRRL-DOX) nanoparticle was formed to a size of 167.5 ± 12.4 nm and stably maintains its nanoparticle structure in saline media for 3 days. The FRRL-DOX nanoparticle is well taken up by tumoral nuclei and effectively induces cancer cell death with minimal toxicity to normal cells. In addition, the FRRL-DOX nanoparticle shows 2.3-16.3-fold greater tumor-specific accumulation in vivo than other prodrug nanoparticles and free DOX. The therapeutic effect of FRRL-DOX is finally examined, demonstrating 2.1-fold better anticancer efficacy compared to that of free DOX. Notably, the FRRL-DOX nanoparticle does not exert serious toxicity in its repeated intravenous administration at a high dose of up to 10 mg/kg (equiv. to DOX). In conclusion, the peptide sequence for cathepsin B-cleavable prodrug nanoparticle is determined to be successfully optimized in a way of increasing its tumor selectivity and lowering toxicity to normal tissues.

Antibiotic-Loaded Amphiphilic Chitosan Nanoparticles Target Macrophages and Kill an Intracellular Pathogen

In this work, levofloxacin (LVX), a third-generation fluoroquinolone antibiotic, is encapsulated within amphiphilic polymeric nanoparticles of a chitosan-g-poly(methyl methacrylate) produced by self-assembly and physically stabilized by ionotropic crosslinking with sodium tripolyphosphate. Non-crosslinked nanoparticles display a size of 29 nm and a zeta-potential of +36 mV, while the crosslinked counterparts display 45 nm and +24 mV, respectively. The cell compatibility, uptake, and intracellular trafficking are characterized in the murine alveolar macrophage cell line MH-S and the human bronchial epithelial cell line BEAS-2B in vitro. Internalization events are detected after 10 min and the uptake is inhibited by several endocytosis inhibitors, indicating the involvement of complex endocytic pathways. In addition, the nanoparticles are detected in the lysosomal compartment. Then, the antibacterial efficacy of LVX-loaded nanoformulations (50% w/w drug content) is assessed in MH-S and BEAS-2B cells infected with Staphylococcus aureus and the bacterial burden is decreased by 49% and 46%, respectively. In contrast, free LVX leads to a decrease of 8% and 5%, respectively, in the same infected cell lines. Finally, intravenous injection to a zebrafish larval model shows that the nanoparticles accumulate in macrophages and endothelium and demonstrate the promise of these amphiphilic nanoparticles to target intracellular infections.

Functionalized LbL Film for Localized Delivery of STAT3 siRNA and Oxaliplatin Combination to Treat Colon Cancer

The aim of the study was to develop and evaluate the efficacy of a functionalized layer-by-layer (LbL) assembled film entrapped with oxaliplatin (OX) and signal transducer and activator of transcription 3 (STAT3) siRNA in the localized treatment of colon cancer. The LbL film was prepared by the sequential layering of chitosan (CS) and alginate to attain desired physical and mechanical properties. The film was functionalized by coating folic acid-conjugated CS on one side. On the other side, polycaprolactone was coated as a backing layer to provide directional drug release. OX was entrapped within the layers of the film, while STAT3 siRNA was complexed with CS to form nanoparticles before entrapment in the LbL film. The CS-siRNA nanoparticles were taken up by the colon carcinoma, Caco-2 cells within 3 h and provided concentration-dependent reduction in STAT3 protein expression. The functionalized LbL film (F-LbL film) selectively adhered to the colon cancer tissue in the mice model, whereas the nonfunctionalized film adhered to the normal colon tissue. The combination of OX and STAT3 siRNA provided significantly greater tumor regression, survival rate, and STAT3 protein suppression after localized delivery through oral administration compared with intravenous administration. Taken together, the F-LbL film can selectively bind to colon tumors for localized delivery of drugs to treat colon cancer.

Formulation and Characterization of Tobramycin-Chitosan Nanoparticles Coated with Zinc Oxide Nanoparticles

Herein we describe the preparation, characterization and the antibacterial effect of Tobramycin-chitosan nanoparticles (TOB-CS NPs) coated with zinc oxide nanoparticles (ZnO NPs). Four formulations of TOB-CS NPs (A-D) were prepared to study the effect of experimental variables on the NPs behavior. Two formulations of ZnO NPs were prepared using the solvothermal and the precipitation methods (ZnO₁ and ZnO₂), and then characterized. TOB-CS NPs (Formula d) was coated with the ZnO₁. Moreover, the antibacterial activity of TOB-CS NPs, ZnO NPs and the coated nanoparticles against S. aureus and E. coli was examined. Changing the variables in preparing TOB-CS NPs resulting in variabilities in sizes (297.6–1116.3 nm), charges (+8.29–+39.00 mV), entrapment (51.95–90.60%). Further, TOB release was sustained over four days. ZnO NPs have sizes of 47.44 and 394.4 nm and charges of −62.3 and 89.4 mV when prepared by solvothermal and precipitation technique, respectively. Coated TOB-CS NPs had a size of 342 nm, a charge of +4.39 and released 100 µg/ mL of the drug after four days. The antimicrobial activity of TOB-CS NPs was lower than free TOB against S. aureus and E. coli. The coated NPs showed higher antimicrobial effect in comparison to formula D and ZnO₁. In conclusion, coating TOB-CS NPs with ZnO NPs exhibited a great antibacterial effect that may be sustained for days.

Thermoresponsive Chitosan-Grafted-Poly(N-vinylcaprolactam) Microgels via Ionotropic Gelation for Oncological Applications

Microgels can be considered soft, porous and deformable particles with an internal gel structure swollen by a solvent and an average size between 100 and 1000 nm. Due to their biocompatibility, colloidal stability, their unique dynamicity and the permeability of their architecture, they are emerging as important candidates for drug delivery systems, sensing and biocatalysis. In clinical applications, the research on responsive microgels is aimed at the development of "smart" delivery systems that undergo a critical change in conformation and size in reaction to a change in environmental conditions (temperature, magnetic fields, pH, concentration gradient). Recent achievements in biodegradable polymer fabrication have resulted in new appealing strategies, including the combination of synthetic and natural-origin polymers with inorganic nanoparticles, as well as the possibility of controlling drug release remotely. In this review, we provide a literature review on the use of dual and multi-responsive chitosan-grafted-poly-(N-vinylcaprolactam) (CP) microgels in drug delivery and oncological applications.

Synthesis and Characterization of Chitosan Particles Loaded with Antioxidants Extracted from Chia (Salvia hispanica L.) Seeds

Chia (Salvia hispanica L.) seeds contain antioxidants with great benefits for health and are widely used in the food industry. Antioxidants can be degraded by environmental factors, decreasing their biological activity. Their encapsulation in chitosan (CH) particles represents an alternative to protect them and increases their application. The encapsulation efficiency (%EE) of the antioxidants in the CH particles depends on the synthesis conditions. In this study, two methods for encapsulation of chia extract in chitosan particles were evaluated: method A, 0.05% CH in 1% acetic acid was mixed with 0.07% of tripolyphosphate (TPP) and method B, 0.3% CH in 2% acetic acid was mixed with 1% TPP. The results showed that the %EE decreased with the concentration of the extract, and the FTIR analysis suggested that the compounds of the extract were adsorbed on the surface of the particles. Dynamic light scattering and zeta potential analysis showed that the particles of method A are unstable and with a tendency to agglomerate, and the particles of method B are stable. The highest %EE was obtained with 0.2 mg·mL⁻¹ (method A) and 1.0 mg·mL⁻¹ (method B) of the extract. The higher loading capacity (%LC) (16–72%) was exhibited by the particles of method A. The best particle yield (62–69%) was observed for method B. The particles with the extract adsorbed showed antioxidant activity (5–60%) at 25°C; however, in the particles with the extract encapsulated, the activity increased after subjecting to acidic conditions at 40°C due to the breakdown of the particles. The results obtained will allow choosing the appropriate conditions for the synthesis of chitosan particles loaded with chia extracts with specific characteristics (%EE, %LC, size, and type) according to their future applications. The particles could be used in food and pharmaceutical industries and even in edible films for food packaging.

Chitosan-Based Nanoparticles of Targeted Drug Delivery System in Breast Cancer Treatment

Breast cancer remains one of the world's most dangerous diseases because of the difficulty of finding cost-effective and specific targets for effective and efficient treatment methods. The biodegradability and biocompatibility properties of chitosan-based nanoparticles (ChNPs) have good prospects for targeted drug delivery systems. ChNPs can transfer various antitumor drugs to targeted sites via passive and active targeting pathways. The modification of ChNPs has attracted the researcher to the loading of drugs to targeted cancer cells. The objective of our review was to summarize and discuss the modification in ChNPs in delivering anticancer drugs against breast cancer cells from published papers recorded in Scopus, PubMed, and Google Scholar. In order to improve cellular uptake, drug accumulation, cytotoxicity, and selectivity, we examined different kinds of modification of ChNPs. Notably, these forms of ChNPs use the characteristics of the enhanced permeability and retention (EPR) effect as a proper parameter and different biological ligands, such as proteins, peptides, monoclonal antibodies, and small particles. In addition, as a targeted delivery system, ChNPs provided and significantly improved the delivery of drugs into specific breast cancer cells (MDA-MB-231, 4T1 cells, SK-BR-3, MCF-7, T47D). In conclusion, a promising technique is presented for increasing the efficacy, selectivity, and effectiveness of candidate drug carriers in the treatment of breast cancer.

Hydrophobic modifications of hydroxyethyl cellulose polymers: Their influence on the acute toxicity to aquatic biota

The hydrophobic substitution (HS) of cationic cellulose derivatives may be tuned, promoting their efficiency. This work studied the influence of HS on the acute ecotoxicity of quaternized hydroxyethyl cellulose polymers (SL) to aquatic biota. The ecotoxicity of four SL with different HS (SL-5, SL-30, SL-60, SL-100) was assessed for seven species: Vibrio fischeri, Raphidocelis subcapitata, Chlorella vulgaris, Daphnia magna, Brachionus calyciflorus, Heterocypris incongruens, and Danio rerio. The computed median effective concentrations were used to derive hazard concentrations, by using species sensitive distribution curves. All SL suspensions were characterized for particle size, zeta potential and rheological properties. Results indicated instability of the SL in suspension due to their relatively low zeta potential. Raphidocelis subcapitata, C. vulgaris and B. calyciflorus were the most sensitive to the four SL, suggesting that exposure to these compounds may imbalance the lowest trophic levels. Also, HS influenced the toxicity of SL, with the lowest HS (SL-5) revealing lower ecotoxicity. The maximum acceptable concentrations were 14.0, 2.9, 3.9 and 1.4 mg L^-1 for SL-5, SL-30, SL-60, and SL-100, respectively. Accordingly, SL-5 is suggested as the eco-friendliest and is recommended to be used in the production of care products, in detriment of the other three tested variants.

Engineering Polymeric Nanosystems against Oral Diseases

Nanotechnology and nanoparticles (NPs) are at the forefront of modern research, particularly in the case of healthcare therapeutic applications. Polymeric NPs, specifically, hold high promise for these purposes, including towards oral diseases. Careful optimisation of the production of polymeric NPs, however, is required to generate a product which can be easily translated from a laboratory environment to the actual clinical usage. Indeed, considerations such as biocompatibility, biodistribution, and biodegradability are paramount. Moreover, a pre-clinical assessment in adequate in vitro, ex vivo or in vivo model is also required. Last but not least, considerations for the scale-up are also important, together with an appropriate clinical testing pathway. This review aims to eviscerate the above topics, sourcing at examples from the recent literature to put in context the current most burdening oral diseases and the most promising polymeric NPs which would be suitable against them.

Hyaluronic acid (HA)-coated naproxen-nanoparticles selectively target breast cancer stem cells through COX-independent pathways

Cytotoxic chemotherapy continues to be the main therapeutic option for patients with metastatic breast cancer. Several studies have reported a significant association between chronic inflammation, carcinogenesis and the presence of cancer stem cells (CSC). We hypothesized that the use of non-steroidal anti-inflammatory drugs targeted to the CSC population could help reducing tumor progression and dissemination in otherwise hard to treat metastatic breast cancer. Within this study cationic naproxen (NAP)-bearing polymeric nanoparticles (NPs) were obtained by self-assembly and they were coated with hyaluronic acid (HA) via electrostatic interaction. HA-coated and uncoated NAP-bearing NPs with different sizes were produced by changing the ionic strength of the aqueous preparation solutions (i.e. 300 and 350 nm or 100 and 130 nm in diameter, respectively). HA-NPs were fully characterized in terms of physicochemical parameters and biological response in cancer cells, macrophages and endothelial cells. Our results revealed that HA-coating of NPs provided a better control in NAP release and improved their hemocompatibility, while ensuring a strong CSC-targeting in MCF-7 breast cancer cells. Furthermore, the best polymeric NPs formulation significantly (p < 0.001) reduced MCF-7 cells viability when compared to free drug (i.e. 45 ± 6% for S-HA-NPs and 87 ± 10% for free NAP) by p53-dependent induction of apoptosis; and the migration of these cell line was also significantly (p < 0.01) reduced by the nano-formulated NAP (i.e. 76.4% of open wound for S-HA-NPs and 61.6% of open wound for NAP). This increased anti-cancer activity of HA-NAP-NPs might be related to the induction of apoptosis through alterations of the GSK-3β-related COX-independent pathway. Overall, these findings suggest that the HA-NAP-NPs have the potential to improve the treatment of advanced breast cancer by increasing the anti-proliferative effect of NAP within the CSC subpopulation.

Synthesis and antimicrobial activities of chitosan/polypropylene carbonate-based nanoparticles

Antibiotic resistance is an emerging threat to public health. The development of a new generation of antimicrobial compounds is therefore currently required. Here we report a novel antimicrobial polymer of chitosan/polypropylene carbonate nanoparticles (CS/PPC NPs). These were designed and synthesized from readily available chitosan and a reactive oligomer polypropylene carbonate (PPC)-derived epoxy intermediate. By employing a simple and efficient functionalized strategy, a series of micelle-like chitosan-graft-polypropylene carbonate (CS-g-PPC) polymers and chitosan-polypropylene carbonate (CS-PPC) microgels were prepared by reacting mono-/bis-epoxy capped PPC with chitosan. The chemical structure, particle size, and surface charge of the newly synthesized polymers were characterized by infrared (IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, dynamic light scattering (DLS), and zeta potential measurements. The antimicrobial activities of these nanoparticles were determined in both Gram-positive bacteria (S. aureus) and Gram-negative bacteria (E. coli). Minimum inhibitory concentration (MIC), the nanoparticle concentration needed to completely inhibit the bacterial growth, was found at 128 μg mL-1 to 1024 μg mL-1, strongly depending both on the nature of the epoxy-imine network formed from the functional groups (mono- or bis-capped epoxy groups reacting with amine groups) and the feed ratio of the functional groups (-epoxy/-NH2) between the functionalized PPC and chitosan. No hemolysis was observed at concentrations well in excess of the effective bacteria-inhibiting concentrations. These findings provide a novel strategy to fabricate a new type of nanoantibiotic for antimicrobial applications.

Nanoencapsulation of essential oils and their bioactive constituents: A novel strategy to control mycotoxin contamination in food system

Spoilage of food by mycotoxigenic fungi poses a serious risk to food security throughout the world. In view of the negative effects of synthetic preservatives, essential oils (EOs) and their bioactive constituents are gaining momentum as suitable substitute to ensure food safety by controlling mycotoxins. However, despite their proven preservative potential against mycotoxins, the use of EOs/bioactive constituents in real food system is still restricted due to instability caused by abiotic factors and negative impact on organoleptic attributes after direct application. Nanoencapsulation in this regard could be a promising approach to address these problems, since the process can increase the stability of EOs/bioactive constituents, barricades their loss and considerably prevent their interaction with food matrices, thus preserving their original organoleptic qualities. The aim of this review is to provide wider and up-to-date overview on recent advances in nanoencapsulation of EOs/bioactive constituents with the objective to control mycotoxin contamination in food system. Further, the information on polymer characteristics, nanoencapsulation techniques, factors affecting the nanoencapsulation, applications of nanoencapsulated formulations, and characterization along with the study on their release kinetics and impacts on organoleptic attributes of food are discussed. Finally, the safety aspects of nanoencapsulated formulations for their safe utilization are also explored.

Increased Cytotoxic Efficacy of Protocatechuic Acid in A549 Human Lung Cancer Delivered via Hydrophobically Modified-Chitosan Nanoparticles As an Anticancer Modality

The growing incidence of global lung cancer cases against successful treatment modalities has increased the demand for the development of innovative strategies to complement conventional chemotherapy, radiation, and surgery. The substitution of chemotherapeutics by naturally occurring phenolic compounds has been touted as a promising research endeavor, as they sideline the side effects of current chemotherapy drugs. However, the therapeutic efficacy of these compounds is conventionally lower than that of chemotherapeutic agents due to their lower solubility and consequently poor intracellular uptake. Therefore, we report herein a hydrophobically modified chitosan nanoparticle (pCNP) system for the encapsulation of protocatechuic acid (PCA), a naturally occurring but poorly soluble phenolic compound, for increased efficacy and improved intracellular uptake in A549 lung cancer cells. The pCNP system was modified by the inclusion of a palmitoyl group and physico-chemically characterized to assess its particle size, Polydispersity Index (PDI) value, amine group quantification, functional group profiling, and morphological properties. The inclusion of hydrophobic palmitoyl in pCNP-PCA was found to increase the encapsulation of PCA by 54.5% compared to unmodified CNP-PCA samples whilst it only conferred a 23.4% larger particle size. The single-spherical like particles with uniformed dispersity pCNP-PCA exhibited IR bands, suggesting the successful incorporation of PCA within its core, and a hydrophobic layer was elucidated via electron micrographs. The cytotoxic efficacy was then assessed by using an MTT cytotoxicity assay towards A549 human lung cancer cell line and was compared with traditional chitosan nanoparticle system. Fascinatingly, a controlled release delivery and enhanced therapeutic efficacy were observed in pCNP-PCA compared to CNP, which is ascribed to lower IC50 values in the 72-h treatment in the pCNP system. Using the hydrophobic system, efficacy of PCA was significantly increased in 24-, 48-, and 72-h treatments compared to a single administration of the compound, and via the unmodified CNP system. Findings arising from this study exhibit the potential of using such modified nanoparticulate systems in increasing the efficacy of natural phenolic compounds by augmenting their delivery potential for better anti-cancer responses.

Covalently and ionically, dually crosslinked chitosan nanoparticles block quorum sensing and affect bacterial cell growth on a cell-density dependent manner

In our efforts to improve the quality and stability of chitosan nanoparticles (NPs), we describe here a new type of chitosan NPs dually crosslinked with genipin and sodium tripolyphosphate (TPP) that display quorum quenching activity. These NPs were created using a simplified and robust procedure that resulted in improved physicochemical properties and enhanced stability. This procedure involves the covalent crosslinking of chitosan with genipin, followed by the formation of chitosan NPs by ionic gelation with TPP. We have optimized the conditions to obtain genipin pre-crosslinked nanoparticles (PC-NPs) with positive ς-potential (~ +30 mV), small diameter (~130 nm), and low size distributions (PdI = 0.1-0.2). PC-NPs present physicochemical properties that are comparable to those of other dually crosslinked chitosan NPs fabricated with different protocols. In contrast to previously characterized NPs, however, we found that PC-NPs strongly reduce the acyl homoserine lactone (AHL)-mediated quorum sensing response of an Escherichia coli fluorescent biosensor. Thus, PC-NPs combine, in a single design, the stability of dually crosslinked chitosan NPs and the quorum quenching activity of ionically crosslinked NPs. Similar to other chitosan NPs, the mode of action of PC-NPs is consistent with the existence of a "stoichiometric ratio" of NP/bacterium, at which the positive charge of the NPs counteracts the negative ς-potential of the bacterial envelope. Notably, we found that the time of the establishment of the "stoichiometric ratio" is a function of the NP concentration, implying that these NPs could be ideal for applications aiming to target of bacterial populations at specific cell densities. We are confident that our PC-NPs are up-and-coming candidates for the design of efficient anti-quorum sensing and a new generation antimicrobial strategies.

Biomolecular uptake effects on chitosan/tripolyphosphate micro- and nanoparticle stability

Colloidal chitosan/tripolyphosphate (TPP) particles have attracted significant attention as potential delivery vehicles for drugs, genes and vaccines. Yet, there have been several fundamental studies that showed these particles to disintegrate at physiological pH and ionic strength levels. To reconcile these findings with the published drug, gene and vaccine delivery research where chitosan/TPP particle disintegration was not reported, it has been postulated that the particles could be stabilized by their bioactive payloads. To test this hypothesis, here we examine whether the association of chitosan/TPP particles with model anionic proteins, α-lactalbumin (α-LA) and bovine serum albumin (BSA), and polynucleotides (DNA) enhances chitosan/TPP particle stability at physiological ionic strengths, using 150 mM NaCl (pH 5.5) and 1× PBS (pH 6.0) as the dissolution media. Light scattering and UV-vis spectroscopy revealed that anionic protein uptake had no impact on particle stability, likely due to the relatively weak protein/particle binding at near-physiological ionic strengths, which caused the protein to be rapidly released. This result occurred regardless of whether the protein was loaded during or after particle formation. Conversely, DNA uptake (at least at some compositions) increased the chitosan fractions persisting in a complexed/particulate form in model dissolution media, with the DNA remaining largely complexed to the chitosan at all investigated conditions. Collectively, these findings suggest that, while most bioactive payloads do not interact with chitosan strongly enough to stabilize chitosan/TPP particles, these chitosan particles can be stabilized to dissolution through the incorporation of polyanions.

Binary Solutions of Hyaluronan and Lactose-Modified Chitosan: The Influence of Experimental Variables in Assembling Complex Coacervates

A miscibility study between oppositely charged polyelectrolytes, namely hyaluronic acid and a lactose-modified chitosan, is here reported. Experimental variables such as polymers' weight ratios, pH values, ionic strengths and hyaluronic acid molecular weights were considered. Transmittance analyses demonstrated the mutual solubility of the two biopolymers at a neutral pH. The onset of the liquid-liquid phase separation due to electrostatic interactions between the two polymers was detected at pH 4.5, and it was found to be affected by the overall ionic strength, the modality of mixing and the polymers' weight ratio. Thorough Dynamic Light Scattering (DLS) measurements were performed to check the quality of the formed coacervates by investigating their dimensions, homogeneity and surface charge. The whole DLS results highlighted the influence of the hyaluronic acid molecular weight in affecting coacervates' dispersity and size.

Chitosan Nanocomplexes for the Delivery of ENaC Antisense Oligonucleotides to Airway Epithelial Cells

Nanoscale drug delivery systems exhibit a broad range of applications and promising treatment possibilities for various medical conditions. Nanomedicine is of great interest, particularly for rare diseases still lacking a curative treatment such as cystic fibrosis (CF). CF is defined by a lack of Cl⁻ secretion through the cystic fibrosis transmembrane conductance regulator (CFTR) and an increased Na⁺ absorption mediated by the epithelial sodium channel (ENaC). The imbalanced ion and water transport leads to pathological changes in many organs, particularly in the lung. We developed a non-viral delivery system based on the natural aminopolysaccharide chitosan (CS) for the transport of antisense oligonucleotides (ASO) against ENaC to specifically address Na⁺ hyperabsorption. CS–ASO electrostatic self-assembled nanocomplexes were formed at varying positive/negative (P/N) charge ratios and characterized for their physicochemical properties. Most promising nanocomplexes (P/N 90) displayed an average size of ~150 nm and a zeta potential of ~+30 mV. Successful uptake of the nanocomplexes by the human airway epithelial cell line NCI-H441 was confirmed by fluorescence microscopy. Functional Ussing chamber measurements of transfected NCI-H441 cells showed significantly decreased Na⁺ currents, indicating successful downregulation of ENaC. The results obtained confirm the promising characteristics of CS as a non-viral and non-toxic delivery system and demonstrate the encouraging possibility to target ENaC with ASOs to treat abnormal ion transport in CF.

Porous chitosan by crosslinking with tricarboxylic acid and tuneable release

Chitosan hydrogels crosslinked with 1,3,5-benzene tricarboxylic acid (BTC) are readily prepared at room temperature by adding aqueous chitosan solution dropwise into BTC-ethanol solution. Highly interconnected porous chitosan materials are subsequently prepared by freeze-drying the chitosan hydrogels. These chitosan materials show porous structures with smaller pores than conventionally prepared chitosan hydrogels via crosslinking with NaOH, genipin or sodium triphosphate. This method of forming chitosan hydrogels with BTC provides the advantage of facile encapsulation of both hydrophobic and hydrophilic compounds, as demonstrated with the model dyes (Oil Red O and Rhodamine B). The release of the hydrophilic dye from the chitosan hydrogels is demonstrated and can be tuned by BTC/chitosan concentrations and the hydrogel drying methods. However, the release of encapsulated hydrophobic dye is negligible.

Ionically crosslinked polyelectrolyte nanoparticle formation mechanisms: the significance of mixing

Mixing oppositely charged polyelectrolytes and multivalent counterion solutions at low concentrations leads to the formation of colloidal ionically crosslinked polyelectrolyte particles. Due to the rapid reaction kinetics, the complexation processes and the final product could vary significantly when changing the mixing efficiency, which was often overlooked in previous studies. To investigate the effect of mixing on the polyelectrolyte-based colloid formation, we use chitosan/tripolyphosphate mixtures as a model system and compare the particle formation under flash nano-complexation (FNC, representing rapid and efficient mixing) and conventional dropwise mixing. It turns out that the non-uniform mixing and rapid complex formation during conventional mixing lead to particle formation at a low tripolyphosphate : chitosan ratio, which could be avoided by FNC. When mixing using FNC, the particle formation started at a critical tripolyphosphate : glucosamine ratio, below which only soluble complexes exist, and such a critical ratio is independent of the chitosan molecular weight and charge density. Homogeneous mixing also leads to the formation of a large amount of small primary particles without further aggregation due to the rapid consumption of free crosslinking counterions. Such a strong dependency of ionically crosslinked polyelectrolyte colloid formation on the mixing efficiency was also demonstrated using other polyelectrolytes and counterions. Thus, the mixing efficiency could have a significant impact on the interpretation of the complexation process and the mechanisms and should be carefully discussed when studying ionically crosslinked polyelectrolyte colloids.

Staggered Herringbone Microfluid Device for the Manufacturing of Chitosan/TPP Nanoparticles: Systematic Optimization and Preliminary Biological Evaluation

Chitosan nanoparticles (CS NPs) showed promising results in drug, vaccine and gene delivery for the treatment of various diseases. The considerable attention towards CS was owning to its outstanding biological properties, however, the main challenge in the application of CS NPs was faced during their size-controlled synthesis. Herein, ionic gelation reaction between CS and sodium tripolyphosphate (TPP), a widely used and safe CS cross-linker for biomedical application, was exploited by a microfluidic approach based on a staggered herringbone micromixer (SHM) for the synthesis of TPP cross-linked CS NPs (CS/TPP NPs). Screening design of experiments was applied to systematically evaluate the main process and formulative factors affecting CS/TPP NPs physical properties (mean size and size distribution). Effectiveness of the SHM-assisted manufacturing process was confirmed by the preliminary evaluation of the biological performance of the optimized CS/TPP NPs that were internalized in the cytosol of human mesenchymal stem cells through clathrin-mediated mechanism. Curcumin, selected as a challenging model drug, was successfully loaded into CS/TPP NPs (EE% > 70%) and slowly released up to 48 h via the diffusion mechanism. Finally, the comparison with the conventional bulk mixing method corroborated the efficacy of the microfluidics-assisted method due to the precise control of mixing at microscales.

Versatile biomanufacturing through stimulus-responsive cell-material feedback

Small-scale production of biologics has great potential for enhancing the accessibility of biomanufacturing. By exploiting cell-material feedback, we have designed a concise platform to achieve versatile production, analysis and purification of diverse proteins and protein complexes. The core of our technology is a microbial swarmbot, which consists of a stimulus-sensitive polymeric microcapsule encapsulating engineered bacteria. By sensing the confinement, the bacteria undergo programmed partial lysis at a high local density. Conversely, the encapsulating material shrinks responding to the changing chemical environment caused by cell growth, squeezing out the protein products released by bacterial lysis. This platform is then integrated with downstream modules to enable quantification of enzymatic kinetics, purification of diverse proteins, quantitative control of protein interactions and assembly of functional protein complexes and multienzyme metabolic pathways. Our work demonstrates the use of the cell-material feedback to engineer a modular and flexible platform with sophisticated yet well-defined programmed functions.

A Protocol To Characterize Peptide-Based Drug Delivery Systems for miRNAs

Micro RNA (miRNA)-based medicines have attracted attention as new therapeutic strategies to treat genetic diseases and metabolic and immunological disorders. MiRNAs have emerged as key mediators of metabolic processes fulfilling regulatory functions in maintaining physiological conditions, while altered miRNA expression profiles are often associated with genetic diseases. However, naked miRNAs exhibit poor enzymatic stability, biomembrane permeation, and cellular uptake. To overcome these limitations, the development of appropriate drug delivery systems (DDS) is necessary. Herein, a DDS is characterized being assembled from miRNA-27a (negative regulator in fat metabolism) and the amphipathic N-TER peptide. Dynamic light scattering (DLS), electrophoretic light scattering, and atomic force microscopy (AFM) are used to investigate physicochemical properties (i.e., size, shape, and charge) of the DDS. Although surface charges should provide decent stabilization, the AFM results confirm a state of agglomeration, which is also suggested by DLS. Furthermore, AFM studies reveal adhesion on hydrophilic as well as hydrophobic substrates, which is related to the amphipathic properties of the N-TER peptide. Physicochemical properties of DDS are important parameters, which have an impact on cell internalization/uptake and have to be taken into account for in vitro studies to develop a successful peptide-based DDS for miRNA replacement therapy in metabolic diseases, such as obesity and others.

Chitosan-graft-poly(methyl methacrylate) amphiphilic nanoparticles: Self-association and physicochemical characterization

In this work, we synthesized and characterized the self-assembly behavior of a chitosan-poly(methyl methacrylate) graft copolymer and the properties of the formed nanoparticles by static and dynamic light scattering, small-angle neutron scattering, and transmission electron microscopy. Overall, our results indicate that the hydrophobization of the chitosan side-chain with PMMA leads to a complex array of small unimolecular and/or small-aggregation number "building blocks" that further self-assemble into larger amphiphilic nanoparticles.