Process optimization and optical properties of colloidal self-assembly via refrigerated centrifugation

Kinetics-controlled regulation for homogeneous nucleation and growth of colloidal polymer and carbon nanospheres

Size regulation of uniform polymer nanospheres (PNSs) and carbon nanospheres (CNSs) below 100 nm has been difficult and is limited by multiple factors, such as ongoing nucleation, Ostwald ripening, minimization of surface energy, and high viscosity during the nucleation and growth process. In this study, a kinetics-controlled regulation is reported for the synthesis of monodispersed PNSs and corresponding CNSs with adjustable size below 100 nm. During the synthesis of PNSs, three distinct stages including surface energy control, surface tension control and viscosity control have been observed, where the concentration of block copolymer F127 (C_F127) plays a vital role in affecting the nucleation rate of PNSs and tunes the diffusion rate of monomers and migration of particles during the nucleation and growth process. As a consequence, the size of monodisperse CNSs can be customized from 100 nm down to 41 nm with PDI below 5%.

Scaffold-Free Strategy Using a PEG-Dextran Aqueous Two-Phase-System for Corneal Tissue Repair

Forming thin tissue constructs with minimal extracellular matrix surrounding them is important for tissue engineering applications. Here, we explore and optimize a strategy that enables rapid fabrication of scaffold-free corneal tissue constructs using the liquid-liquid interface of an aqueous two-phase system (ATPS) that is based on biocompatible polymers, dextran and polyethylene glycol. Intact tissue-like constructs, made of corneal epithelial or endothelial cells, can be formed on the interface between the two liquid phases of ATPS within hours and subsequently collected simply by removing the liquid phases. The formed corneal cell constructs express essential physiological markers and have preserved viability and proliferative ability in vitro. The corneal epithelial cell constructs are also able to re-epithelialize the corneal epithelial wound in vitro. The results suggest the promise of our reported strategy in corneal repair.

Photonics in nature and bioinspired designs: sustainable approaches for a colourful world

Biological systems possess nanoarchitectures that have evolved for specific purposes and whose ability to modulate the flow of light creates an extraordinary diversity of natural photonic structures. In particular, the striking beauty of the structural colouration observed in nature has inspired technological innovation in many fields. Intense research has been devoted to mimicking the unique vivid colours with newly designed photonic structures presenting stimuli-responsive properties, with remarkable applications in health care, safety and security. This review highlights bioinspired photonic approaches in this context, starting by presenting many appealing examples of structural colours in nature, followed by describing the versatility of fabrication methods and designed coloured structures. A particular focus is given to optical sensing for medical diagnosis, food control and environmental monitoring, which has experienced a significant growth, especially considering the advances in obtaining inexpensive miniaturized systems, more reliability, fast responses, and the use of label-free layouts. Additionally, naturally derived biomaterials and synthetic polymers are versatile and fit many different structural designs that are underlined. Progress in bioinspired photonic polymers and their integration in novel devices is discussed since recent developments have emerged to lift the expectations of smart, flexible, wearable and portable sensors. The discussion is expanded to give emphasis on additional functionalities offered to related biomedical applications and the use of structural colours in new sustainable strategies that could meet the needs of technological development.

Photonic Crystals for Plasmonic Photocatalysis

Noble metal (NM)-modified wide-bandgap semiconductors with activity under visible light (Vis) irradiation, due to localized surface plasmon resonance (LSPR), known as plasmonic photocatalysts, have been intensively studied over the last few years. Despite the novelty of the topic, a large number of reports have already been published, discussing the optimal properties, synthesis methods and mechanism clarification. It has been proposed that both efficient light harvesting and charge carriers’ migration are detrimental for high and stable activity under Vis irradiation. Accordingly, photonic crystals (PCs) with photonic bandgap (PBG) and slow photon effects seem to be highly attractive for efficient use of incident photons. Therefore, the study on PCs-based plasmonic photocatalysts has been conducted, mainly on titania inverse opal (IO) modified with nanoparticles (NPs) of NM. Although, the research is quite new and only several reports have been published, it might be concluded that the matching between LSPR and PBG (especially at red edge) by tuning of NMNPs size and IO-void diameter, respectively, is the most crucial for the photocatalytic activity.

Morphology- and Crystalline Composition-Governed Activity of Titania-Based Photocatalysts: Overview and Perspective

Titania photocatalysts have been intensively examined for both mechanism study and possible commercial applications for more than 30 years. Although various reports have already been published on titania, including comprehensive review papers, the morphology-governed activity, especially for novel nanostructures, has not been reviewed recently. Therefore, this paper presents novel, attractive, and prospective titania photocatalysts, including zero-, one-, two-, and three-dimensional titania structures. The 1D, 2D, and 3D titania structures have been mainly designed for possible applications, e.g., (i) continuous use without the necessity of particulate titania separation, (ii) efficient light harvesting (e.g., inverse opals), (iii) enhanced activity (fast charge carriers’ separation, e.g., 1D nanoplates and 2D nanotubes). It should be pointed out that these structures might be also useful for mechanism investigation, e.g., (i) 3D titania aerogels with gold either incorporated inside the 3D network or supported in the porosity, and (ii) titania mesocrystals with gold deposited either on basal or lateral surfaces, for the clarification of plasmonic photocatalysis. Moreover, 0D nanostructures of special composition and morphology, e.g., magnetic(core)–titania(shell), mixed-phase titania (anatase/rutile/brookite), and faceted titania NPs have been presented, due to their exceptional properties, including easy separation in the magnetic field, high activity, and mechanism clarification, respectively. Although anatase has been usually thought as the most active phase of titania, the co-existence of other crystalline phases accelerates the photocatalytic activity significantly, and thus mixed-phase titania (e.g., famous P25) exhibits high photocatalytic activity for both oxidation and reduction reactions. It is believed that this review might be useful for the architecture design of novel nanomaterials for broad and diverse applications, including environmental purification, energy conversion, synthesis and preparation of “intelligent” surfaces with self-cleaning, antifogging, and antiseptic properties.

Synthesis of Silica Microspheres-Inspired by the Formation of Ice Crystals-With High Homogeneous Particle Sizes and Their Applications in Photonic Crystals

Silica microspheres (SMs) must possess the performances of desirable monodispersity, narrow particle size distribution, and high sphericity for preparing photonic crystals (PCs) and other materials such as microspheres reference material, etc. We have adopted the techniques of increasing reactant concentration and raising the temperature to improve the synthesis rate of SMs, gaining inspiration from the formation mechanism of ice crystals. SMs with uniform particle sizes (polydispersity index less than 0.05) and good spherical features were fabricated through homogeneous nucleation. The mathematical relationship between particle sizes of SMs and reactant concentrations is further fitted. High accuracy of the regression equation is verified by an F-test and verification experiment. Highly ordered PCs (the stacking fault is about 1.5%, and the point defect is about 10⁻³) with dense stacked opal structures have been obtained by self-assembly of SMs. In addition, highly ordered PCs (the stacking fault is about 3%, and the point defect is about 10⁻³) with non-dense packed opal structure and inverse opal structure were successfully prepared. PCs of inverse opal structure were used to examine their response characteristics to identify ethanol, exhibiting good performance. Our research may provide significant inspiration for the development of other sorts of microspheres.