Exposure to carbon black: a cancer risk?

Wood Residue-Derived Biochar as a Low-Cost, Lubricating Filler in Poly(butylene succinate-co-adipate) Biocomposites

This study focused on the development of a novel biocomposite material formed by a thermoplastic biodegradable polyester, poly(butylene succinate-co-adipate) (PBSA), and a carbonaceous filler as biochar (BC) derived by the pyrolysis of woody biomass waste. Composites with various BC contents (5, 10, 15, and 20 wt.%) were obtained by melt extrusion and investigated in terms of their processability, thermal, rheological, and mechanical properties. In all the composites, BC lowered melt viscosity, behaving as a lubricant, and enhancing composite extrudability and injection moulding at high temperatures up to 20 wt.% of biochar. While the use of biochar did not significantly change composite thermal stability, it increased its stiffness (Young modulus). Differential scanning calorimeter (DSC) revealed the presence of a second crystal phase induced by the filler addition. Furthermore, results suggest that biochar may form a particle network that hinders polymer chain disentanglement, reducing polymer flexibility. A biochar content of 10 wt.% was selected as the best trade-off concentration to improve the composite processability and cost competitiveness without compromising excessively the tensile properties. The findings support the use of biochar as a sustainable renewable filler and pigment for PBSA. Biochar is a suitable candidate to replace more traditional carbon black pigments for the production of biodegradable and inexpensive innovative PBSA composites with potential fertilizing properties to be used in agricultural applications.

Anti-oxidative and inflammatory responses induced by fly ash particles and carbon black in lung epithelial cells

Combustion-derived nanoparticles as constituents of ambient particulate matter have been shown to induce adverse health effects due to inhalation. However, the components inducing these effects as well as the biological mechanisms are still not fully understood. The fine fraction of fly ash particles collected from the electrostatic precipitator of a municipal solid waste incinerator was taken as an example for real particles with complex composition released into the atmosphere to study the mechanism of early biological responses of BEAS-2B human lung epithelial cells. The studies include the effects of the water-soluble and -insoluble fractions of the fly ash and the well-studied carbon black nanoparticles were used as a reference. Fly ash induced reactive oxygen species (ROS) and increased the total cellular glutathione (tGSH) content. Carbon black also induced ROS generation; however, in contrast to the fly ash, it decreased the intracellular tGSH. The fly ash-induced oxidative stress was correlated with induction of the anti-oxidant enzyme heme oxygenase-1 and increase of the redox-sensitive transcription factor Nrf2. Carbon black was not able to induce HO-1. ROS generation, tGSH increase and HO-1 induction were only induced by the insoluble fraction of the fly ash, not by the water-soluble fraction. ROS generation and HO-1 induction were markedly inhibited by pre-incubation of the cells with the anti-oxidant N-acetyl cysteine which confirmed the involvement of oxidative stress. Both effects were also reduced by the metal chelator deferoxamine indicating a contribution of bioavailable transition metals. In summary, both fly ash and carbon black induce ROS but only fly ash induced an increase of intracellular tGSH and HO-1 production. Bioavailable transition metals in the solid water-insoluble matrix of the fly ash mostly contribute to the effects.

Combustion-derived nanoparticles: mechanisms of pulmonary toxicity

1. The general term 'nanoparticle' (NP) is used to define any particle less than 100 nm in at least one dimension and NPs are generally classified as natural, anthropogenic or engineered in origin. Anthropogenic, also referred to as 'ultrafine' particles (UFPs), are predominately combustion derived and are characterized by having an equivalent spherical diameter less than 100 nm. 2. These particles, considered to be 'combustion-derived nanoparticles' (CDNPs), are of toxicological interest given their nanosized dimensions, with properties not displayed by their macroscopic counterparts. 3. The pulmonary deposition efficiency of inhaled UFPs, along with their large surface areas and bound transition metals, is considered important in driving the emerging health effects linked to respiratory toxicity. 4. The toxicology of CDNPs is currently used to predict the health outcomes in humans following exposure to manufactured NPs. Their similar physicochemistry would suggest similar adverse health effects (i.e. pulmonary (and perhaps cardiac) toxicity). As such, it is essential to fully understand CDNP nanotoxicology in order to minimize occupational and environmental exposure.

Bioassay by intratracheal instillation for detection of lung toxicity due to fine particles in F344 male rats

We have established and documented an in vivo bioassay for detection of hazards with intratracheally instilled fine particles, which can be used for risk assessment of toxicity of materials inhaled into deep lung tissue of humans (Yokohira et al. Establishment of a bioassay system for detection of lung toxicity due to fine particle instillation: sequential histopathological changes with acute and subacute lung damage due to intratracheal instillation of quartz in F344 male rats. J Toxicol Pathol 2005;18:13-8). For validation we here examined toxicity of fine particles from quartz, hydrotalcite, potassium octatitanate, palladium oxide and carbon black with this bioassay. A total of 108, 10-week-old F344/DuCrj male rats were randomly divided into 8 groups. Groups 1 to 5 underwent intratracheal instillation of the 5 test particles (4 mg/rat) suspended in 0.2 ml vehicle (saline or 10% propylene glycol and 1% sodium carboxymethyl cellulose in saline: PG-CMC) with a specially designed aerolizer, and subgroups of 7 rats were killed on Days 1 and 28 thereafter. Groups 6 and 7 similarly were exposed to saline and PG-CMC, respectively, as vehicle controls, while group 8 was maintained untreated. Using histopathological changes and immunohistochemically assessed bromodeoxyuridine (BrdU) labeling indices, inducible nitric oxide synthase (iNOS) and matrix metalloproteinase-3 (MMP-3) levels as end points, the quartz treated group exhibited high toxicity, while the values for the other particle-treated groups pointed to only slight effects. Although additional efforts are needed to establish advantages and disadvantages with our bioassay, models featuring intratracheal instillation clearly can be useful for detection of acute or subacute lung toxicity due to inhaled fine particles by using histopathological scoring and markers like BrdU and iNOS for screening purposes in short-term studies.

Carbon black should not be classified as a human carcinogen based on rodent bioassay data

Numerous epidemiology studies have failed to adequately demonstrate an increased risk of lung cancer due to occupational exposure to carbon black (CB). CB is not carcinogenic to mice (oral, skin or inhalation), hamsters (inhalation or intratracheal), guinea pigs (inhalation), rabbits (skin or inhalation), primates (skin or inhalation) or rats (oral). Only studies conducted by inhalation and intratracheal administration in rats have shown significant increases in benign and malignant lung tumors and lesions described as benign cystic keratinizing squamous-cell (KSC) tumors. CB-induced lung tumor formation, including KSC lesions, occurs only in rats. An expert panel reviewing KSC lesions (induced in rats by TiO2 or p-aramid) concluded that KSC lesions are not seen in humans. Lung tumors in humans are primarily located in the bronchial airways, whereas in the rat they occur in the parenchyma and are alveolar in origin. This species-specific response (tumor formation and KSC lesions) by the rat to CB, not seen in any other laboratory species and which has not been reported in humans, strongly suggests that the results of the rat inhalation bioassay should not be considered directly relevant when assessing human risk. Therefore, CB should not be classified as carcinogenic to humans based on the rodent bioassay data.

Formation of 8-oxo-7,8-dihydro-2'-deoxyguanosine in rat lung DNA following subchronic inhalation of carbon black

Chronic high-dose inhalation of carbon black (CB) can produce carcinomas in rat lungs. The mechanisms underlying this response are uncertain. It has been hypothesized that chronic inflammation and cell proliferation may play a role in the development of tumors after high dose, long-term contact of the particles with lung epithelial cells. In this investigation, we analyzed the formation of a known mutagenic lesion [8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxo-dG)] in the lung DNA of rats following subchronic inhalation of CB (Printex-90 and Sterling V). Briefly, female Fischer 344 rats were exposed for 6 h/day, 5 days/week for 13 weeks to 1, 7, and 50 mg/m(3) of Printex-90 (16 nm; specific surface area 300 m(2)/g) and to 50 mg/m(3) of Sterling V CB (70 nm; surface area of 37 m(2)/g). The exposure concentration of Sterling V was selected to be equivalent in terms of retained mass in the lung to the high dose of Printex-90 at the end of exposure. However, in terms of retained particle surface area, the retained lung dose of Sterling V was equivalent to the mid-dose of Printex 90. This design allows comparison of results on the basis of retained particle mass as well as retained particle surface area between the two CB particles. The formation of 8-oxo-dG in the lung DNA was assessed using a reverse phase HPLC system coupled with UV and electrochemical (EC) detection. After 13 weeks of exposure, measurements were made on lung samples obtained at the end of the exposure and a 44-week recovery period in clean air. Lung burdens of CB were determined at both time points as well as differential cell populations from bronchoalveolar lavage fluid (BAL). The results indicate that lung particle overload was achieved after exposure to 7 and 50 mg/m(3) (Printex-90) and 50 mg/m3 (Sterling V) but not at 1 mg/m(3) (Printex-90). Consistent with these results, a significant increase (P < 0.05) in 8-oxo-dG induction was observed following 13 weeks of exposure to 50 mg/m(3) Printex-90 and at 7 and 50 mg/m(3) after the 44-week recovery period. Interestingly, no increase in 8-oxo-dG was observed for Sterling V CB at either time point despite lung particle overload. Although the retained mass dose of Sterling V at the end of exposure was even higher than for Printex 90 (50 mg/m(3) exposure group) (approximately 7.6 vs 4.8 mg), the surface area of the retained Sterling V was similar to that of the retained Printex 90 of the mid-dose exposure (7 mg/m(3)) (approximately 0.2 m(2) in both groups). Since both Sterling V (50 mg/m(3)) and Printex 90 (7 mg/m(3)) did not induce significant increases in 8-oxo-dG in the lung at the end of the 13-week exposure, this finding indicates that a retained large particle mass is not always correlated with similar adverse effects but that particle surface area is a better dose parameter. The lower effect per unit mass dose seen with Sterling V is consistent with earlier studies showing that particle surface area of low toxicity particles is a more appropriate dosemetric for induction of inflammation in the lungs than particle mass (Oberdörster et al., 1994, 2001; Brown et al. 2001; Donaldson et al., 2002). An increase (p < 0.05) in lung lavage neutrophils was observed at 7 mg/m(3) (Printex-90) and 50 mg/m(3) (Printex-90 and Sterling V) at the 13-week exposure period and again at 50 mg/m(3) (Printex-90 and Sterling V, 44-week recovery period). Our current findings suggest that prolonged, high-dose exposure to CB can promote oxidative DNA damage that is consistent with the hypothesis that inflammatory cell-derived oxidants may play a role in the pathogenesis of rat lung tumors following long-term high-dose exposure to CB in rats.