Temporal and spatial immunolocalization of glucomannans in differentiating earlywood tracheid cell walls of Cryptomeria japonica

Bonding of Lignin and Coniferyl Alcohol by a Redox Shuttle of Low-Molecular-Weight Lignols in Enzymatic Oxidative Dehydrogenative Polymerization

Lignin is an aromatic polymer that constitutes plant cell walls. The polymerization of lignin proceeds by radical coupling, and this process requires radicalization of the phenolic end of lignin by enzymes. However, due to the steric hindrance between enzymes, lignin, and polysaccharides, the direct oxidation of the phenolic end of lignin by the enzyme would be difficult, and the details of the growth of lignin are still unknown. In this study, enzymatic dehydrogenative polymerization experiments were conducted using coniferyl alcohol (CA) and the deuterium-labeled lignin model compound (D-LM) under a noncontact condition in which horseradish peroxidase cannot directly oxidize D-LM due to separation by a dialysis membrane. Analysis of deuterium-labeled degraded compounds obtained by a combination of methylation and thioacidolysis revealed the formation of the bond between the phenolic end of D-LM and CA, suggesting that membrane-permeable, low-molecular-weight lignols functioned as a redox shuttle mediator.

Insights into asynchronous changes of cell wall polymers accumulated in different cell types during conifer xylem differentiation

An improved understanding of the events involved in cell wall polymers deposition during xylem development could provide new scientific ways for molecular regulation and biomass utilization. Axial and radial cells are spatially heterogeneous and have highly cross-correlated developmental behavior, whereas the deposition of corresponding cell wall polymers during xylem differentiation is less studied. To clarify our hypothesis that cell wall polymers of two cell types accumulated asynchronously, we performed hierarchical visualization, including label-free in situ spectral imaging of different polymer compositions during the development of Pinus bungeana. In axial tracheids, the deposition of cellulose and glucomannan was observed on earlier stages of secondary wall thickening than that of xylan and lignin, while xylan distribution was strongly related to spatial distribution of lignin during differentiation. The content of lignin and polysaccharides increased by over 130 % and 60 % respectively when the S₃ layer was formed, compared to the S₂ stage. In ray cells, the deposition of crystalline cellulose, xylan, and lignin was generally lagged compared to that in corresponding axial tracheids, although the process followed a similar order. The concentration of lignin and polysaccharides in ray cells was only approximately 50 % of that in the axial tracheids during secondary wall thickening.

Deposition patterns of feruloylarabinoxylan during cell wall formation in moso bamboo

The feruloylarabinoxylan deposition was initiated at the formation of the secondary cell wall, especially S₂ layer in moso bamboo, which may affect crosslinking between cell wall components and plant growth. Hemicelluloses, major components of plant cell walls that are hydrogen bonded to cellulose and covalently bound to lignin, are crucial determinants of cell wall properties. Especially in commelinid monocotyledons, arabinoxylan is often esterified with ferulic acid, which is essential to crosslinking with cell wall components. However, the deposition patterns and localization of ferulic acid during cell wall formation remain unclear. In this study, developing moso bamboo (Phyllostachys pubescens) culms were used to elucidate deposition patterns of hemicelluloses including feruloylarabinoxylan. Ferulic acid content peaked with cessation of elongation growth, and thereafter decreased and remained stable as culm development proceeded. During primary cell wall (PCW) formation, xyloglucan and (1,3;1,4)-β-glucan signals were detected in all tissues. Along with culm development, arabinoxylan and feruloylarabinoxylan signals were sequentially observed in the protoxylem, vascular fibers and metaxylem, and parenchyma. Feruloylarabinoxylan signals were observed slightly later than arabinoxylan signals. Arabinoxylan signals were observed throughout the compound middle lamella and secondary cell wall (SCW), whereas the feruloylarabinoxylan signal was localized to the S₂ layer of the SCW. These results indicate that the biosynthesis of hemicelluloses is regulated in accordance with cell wall layers. Feruloylarabinoxylan deposition may be initiated at the formation of SCW, especially S₂ layer formation. Ferulic acid-mediated linkages of arabinoxylan-arabinoxylan and arabinoxylan-lignin would arise during SCW formation with the cessation of elongation growth.

Chemical Characteristics of Wood Cell Wall with an Emphasis on Ultrastructure: A Mini-Review

Wood is complex in its chemical composition that has an important influence on its chemical behavior and mechanical strength. The complexity is reflected in the ultrastructure of the wood cell wall. In particular, the concentration of main components (cellulose, hemicelluloses and lignin) changes depending on many factors such as the different type or parts of wood, and varies in different cell wall layers. From an ultrastructural standpoint, we describe the current level of knowledge about chemical characteristics of the wood cell walls. The information of distribution of main components in the cell walls of normal wood, reaction wood and water-logged archaeological wood, the cellulose microfibrils orientation, and the interactions between main components were presented based on the use of advanced techniques including transmission electron microscopy, scanning electron microscopy, spectral imaging and nuclear magnetic resonance. In addition, the chemical changes of the wood cell wall during pretreatment are discussed. This mini-review not only provides a better understanding of wood chemistry, but also brings new insights into cell wall recalcitrance.

Wood hemicelluloses exert distinct biomechanical contributions to cellulose fibrillar networks

Hemicelluloses, a family of heterogeneous polysaccharides with complex molecular structures, constitute a fundamental component of lignocellulosic biomass. However, the contribution of each hemicellulose type to the mechanical properties of secondary plant cell walls remains elusive. Here we homogeneously incorporate different combinations of extracted and purified hemicelluloses (xylans and glucomannans) from softwood and hardwood species into self-assembled networks during cellulose biosynthesis in a bacterial model, without altering the morphology and the crystallinity of the cellulose bundles. These composite hydrogels can be therefore envisioned as models of secondary plant cell walls prior to lignification. The incorporated hemicelluloses exhibit both a rigid phase having close interactions with cellulose, together with a flexible phase contributing to the multiscale architecture of the bacterial cellulose hydrogels. The wood hemicelluloses exhibit distinct biomechanical contributions, with glucomannans increasing the elastic modulus in compression, and xylans contributing to a dramatic increase of the elongation at break under tension. These diverging effects cannot be explained solely from the nature of their direct interactions with cellulose, but can be related to the distinct molecular structure of wood xylans and mannans, the multiphase architecture of the hydrogels and the aggregative effects amongst hemicellulose-coated fibrils. Our study contributes to understanding the specific roles of wood xylans and glucomannans in the biomechanical integrity of secondary cell walls in tension and compression and has significance for the development of lignocellulosic materials with controlled assembly and tailored mechanical properties.

Hemicelluloses are an essential constituent of plant cell walls, but the individual biomechanical roles remain elusive. Here the authors report on the interaction of wood hemicellulose with bacterial cellulose during deposition and explore the resultant fibrillar architecture and mechanical properties.

Artificially lignified cell wall catalyzed by peroxidase selectively localized on a network of microfibrils from cultured cells

An artificial lignified cell wall was synthesized in three steps: (1) isolation of microfibrillar network; (2) localization of peroxidase through immunoreaction; and (3) polymerization of DHP to lignify the cell wall. Artificial woody cell wall synthesis was performed following the three steps along with the actual formation in nature using cellulose microfibrils extracted from callus derived from Cryptomeria japonica. First, we constructed a polysaccharide network on a transmission electron microscopy (TEM) grid. The preparation method was optimized by chemical treatment, followed by mechanical fibrillation to create a microfibrillated network. Morphology was examined by TEM, and chemical characterization was by Fourier transform infrared (FTIR) spectroscopy. Second, we optimized the process to place peroxidase on the microfibrils via an immunoreaction technique. Using a xyloglucan antibody, we could ensure that gold particles attached to the secondary antibodies were widely and uniformly localized along with the microfibril network. Third, we applied the peroxidase attached to secondary antibodies and started to polymerize the lignin on the grid by simultaneously adding coniferyl alcohol and hydrogen peroxide. After 30 min of artificial lignification, TEM observation showed that lignin-like substances were deposited on the polysaccharide network. In addition, FTIR spectra revealed that the bands specific for lignin had increased, demonstrating the successful artificial formation of woody cell walls. This approach may be useful for studying woody cell wall formation and for producing made-to-order biomaterials.

Immunolocalization of β-(1-4)-D-galactan, xyloglucans and xylans in the reaction xylem fibres of Leucaena leucocephala (Lam.) de Wit

Cell wall architecture of tension wood fibres represents a suitable biological system to study the mechanism of growth and maintenance of posture of trees growing under various physical and physiological growth constraints. In the present study, we investigated the spatial distributions of β-(1-4)-D-galactan, xyloglucan and xylans (both less and highly substituted) in the opposite and tension wood fibres of bent Leucaena leucocephala by immunolabelling with monoclonal antibodies LM5, CCRCM1, LM10 and LM11 specific to these carbohydrate epitopes. The presence of non-lignified, tertiary wall layer is the typical tension wood characteristic associated with the reaction xylem fibres in Leucaena. LM5 labelling of opposite fibres showed weak labelling in the cell walls indicating less concentration of β-(1-4)-D-galactans while tension wood showed strong labelling in the tertiary wall layer suggesting the gelatinous layer (G-layer) has a strong cross linking with β-(1-4)-D-galactans. Xyloglucan distribution was more in the compound middle lamellae and the primary wall-S1 layer boundary of tension wood fibres as compared to that of opposite wood. A weak labelling was also evident near the boundary between the G-layer and the secondary wall of tension wood fibres. The secondary wall of opposite and tension wood fibres showed a strong distribution of both ls ACG Xs (LM10) and hs ACG Xs (LM11) while a weak labelling was noticed in the compound middle lamella. Tension wood fibres also showed strong xylan labelling mainly confined to the lignified secondary walls while the G-layer showed weak xylan labelling. In conclusion, our results suggest that β-(1-4)-D-galactans and xyloglucans could be implicated in the tensile stress generation within the G-layer of tension wood fibres of Leucaena leucocephala.

Plant Fibre: Molecular Structure and Biomechanical Properties, of a Complex Living Material, Influencing Its Deconstruction towards a Biobased Composite

Plant cell walls form an organic complex composite material that fulfils various functions. The hierarchical structure of this material is generated from the integration of its elementary components. This review provides an overview of wood as a composite material followed by its deconstruction into fibres that can then be incorporated into biobased composites. Firstly, the fibres are defined, and their various origins are discussed. Then, the organisation of cell walls and their components are described. The emphasis is on the molecular interactions of the cellulose microfibrils, lignin and hemicelluloses in planta. Hemicelluloses of diverse species and cell walls are described. Details of their organisation in the primary cell wall are provided, as understanding of the role of hemicellulose has recently evolved and is likely to affect our perception and future study of their secondary cell wall homologs. The importance of the presence of water on wood mechanical properties is also discussed. These sections provide the basis for understanding the molecular arrangements and interactions of the components and how they influence changes in fibre properties once isolated. A range of pulping processes can be used to individualise wood fibres, but these can cause damage to the fibres. Therefore, issues relating to fibre production are discussed along with the dispersion of wood fibres during extrusion. The final section explores various ways to improve fibres obtained from wood.

Golgi enrichment and proteomic analysis of developing Pinus radiata xylem by free-flow electrophoresis

Our understanding of the contribution of Golgi proteins to cell wall and wood formation in any woody plant species is limited. Currently, little Golgi proteomics data exists for wood-forming tissues. In this study, we attempted to address this issue by generating and analyzing Golgi-enriched membrane preparations from developing xylem of compression wood from the conifer Pinus radiata. Developing xylem samples from 3-year-old pine trees were harvested for this purpose at a time of active growth and subjected to a combination of density centrifugation followed by free flow electrophoresis, a surface charge separation technique used in the enrichment of Golgi membranes. This combination of techniques was successful in achieving an approximately 200-fold increase in the activity of the Golgi marker galactan synthase and represents a significant improvement for proteomic analyses of the Golgi from conifers. A total of thirty known Golgi proteins were identified by mass spectrometry including glycosyltransferases from gene families involved in glucomannan and glucuronoxylan biosynthesis. The free flow electrophoresis fractions of enriched Golgi were highly abundant in structural proteins (actin and tubulin) indicating a role for the cytoskeleton during compression wood formation. The mass spectrometry proteomics data associated with this study have been deposited to the ProteomeXchange with identifier PXD000557.

Immunolocalization of hemicelluloses in Arabidopsis thaliana stem. Part II: Mannan deposition is regulated by phase of development and its patterns of temporal and spatial distribution differ between cell types

Microdistribution of mannans in Arabidopsis stem was examined using immunolocalization with mannan-specific monoclonal antibodies (LM21 and LM22). Mannan labeling in secondary xylem cells (except for protoxylem vessels) was initially detected in the cell wall during S(2) formation and increased gradually during development. Labeling in metaxylem vessels (vessels) was detected earlier than that in xylary fibers (fibers), but was much weaker than fibers. The S(1) layer of vessels and fibers showed much less labeling than the S(2) layer. Some strong labeling was also detected in pit membranes of vessel pits. Interfascicular fibers (If-fibers) showed more heterogeneous labeling patterns than fibers by LM21. Unlike fibers, If-fibers also revealed some strong labeling in the cell corner of the S(1) layer, indicating different mannan labeling patterns between If-fibers and fibers. Interestingly, protoxylem vessels (proto-vessels) showed strong labeling at the early stage of secondary xylem formation with more intense labeling in the outer- than inner cell wall even though fibers and vessels showed no or very low labeling at this stage. Labeling intensity of proto-vessels was also much stronger than vessels and stronger or slightly weaker than fibers by LM21 and LM22, respectively. Using pectinase and mild alkali treatment, the presence of mannans in parenchymatous cells was also confirmed. Together our observations indicate that there are temporal and spatial variations in mannan labeling between cell types in the secondary xylem of Arabidopsis stems. Some similar features of mannan labeling between Arabidopsis and poplar are also discussed.

Distribution of glucomannans and xylans in poplar xylem and their changes under tension stress

Present work investigated glucomannan (GM) and xylan distribution in poplar xylem cells of normal- (NW), opposite- (OW) and tension wood (TW) with immunolocalization methods. GM labeling was mostly detected in the middle- and inner S(2) (+S(3)) layer of NW and OW fibers, while xylan labeling was observed in the whole secondary cell wall. GM labeling in vessels of NW and OW was much weaker than in fibers and mostly detected in the S(2) layer, whereas slightly stronger xylan labeling than fibers was detected in the whole secondary cell wall of vessels. Ray cells in NW and OW showed no GM labeling, but strong xylan labeling. These results indicate that GMs and xylans are spatially distributed in poplar xylem cells with different concentrations present in different cell types. Surprisingly, TW showed significant decrease of GM labeling in the normal secondary cell wall of gelatinous (G) fibers compared to NW and OW, while xylan labeling was almost identical indicating that the GM and xylan synthetic pathways in fibers have different reaction mechanisms against tension stress. Unlike fibers, no notable changes in GM labeling were detected in vessels of TW, suggesting that GM synthesis in vessels may not be affected by tension stress. GM and xylan was also detected in the G-layer with slightly stronger and much weaker labeling than the normal secondary cell wall of G-fibers. Differences in GM and xylan distribution are also discussed for the same functional cells found in hardwoods and softwoods.

Localization of cell wall polysaccharides in normal and compression wood of radiata pine: relationships with lignification and microfibril orientation

The distribution of noncellulosic polysaccharides in cell walls of tracheids and xylem parenchyma cells in normal and compression wood of Pinus radiata, was examined to determine the relationships with lignification and cellulose microfibril orientation. Using fluorescence microscopy combined with immunocytochemistry, monoclonal antibodies were used to detect xyloglucan (LM15), β(1,4)-galactan (LM5), heteroxylan (LM10 and LM11), and galactoglucomannan (LM21 and LM22). Lignin and crystalline cellulose were localized on the same sections used for immunocytochemistry by autofluorescence and polarized light microscopy, respectively. Changes in the distribution of noncellulosic polysaccharides between normal and compression wood were associated with changes in lignin distribution. Increased lignification of compression wood secondary walls was associated with novel deposition of β(1,4)-galactan and with reduced amounts of xylan and mannan in the outer S2 (S2L) region of tracheids. Xylan and mannan were detected in all lignified xylem cell types (tracheids, ray tracheids, and thick-walled ray parenchyma) but were not detected in unlignified cell types (thin-walled ray parenchyma and resin canal parenchyma). Mannan was absent from the highly lignified compound middle lamella, but xylan occurred throughout the cell walls of tracheids. Using colocalization measurements, we confirmed that polysaccharides containing galactose, mannose, and xylose have consistent correlations with lignification. Low or unsubstituted xylans were localized in cell wall layers characterized by transverse cellulose microfibril orientation in both normal and compression wood tracheids. Our results support the theory that the assembly of wood cell walls, including lignification and microfibril orientation, may be mediated by changes in the amount and distribution of noncellulosic polysaccharides.

Occurrence of xylan and mannan polysaccharides and their spatial relationship with other cell wall components in differentiating compression wood tracheids of Cryptomeria japonica

Compression wood (CW) tracheids have different cell wall components than normal wood (NW) tracheids. However, temporal and spatial information on cell wall components in CW tracheids is poorly understood. We investigated the distribution of arabino-4-O-methylglucuronoxylans (AGXs) and O-acetyl-galactoglucomannans (GGMs) in differentiating CW tracheids. AGX labeling began to be detected in the corner of the S(1) layer at the early S(1) formation stage. Subsequently, the cell corner middle lamella (ccML) showed strong AGX labeling when intercellular spaces were not fully formed. AGX labeling was uniformly distributed in the S(1) layer, but showed uneven distribution in the S(2) layer. AGX labeling was mainly detected in the inner S(2) layer after the beginning of the helical cavity formation. The outer S(2) layer showed almost no labeling of low substituted AGXs. Only a very small amount of high substituted AGXs was distributed in the outer S(2) layer. These patterns of AGX labeling in the S(2) layer opposed the lignin and β-1-4-galactan distribution in CW tracheids. GGM labeling patterns were almost identical to AGX labeling in the early stages of CW tracheids, and GGM labeling was detected in the entire S(2) layer from the early S(2) formation stage of CW tracheids with some spatial differences in labeling density depending on developmental stage. Compared with NW tracheids, CW tracheids showed significantly different AGX distributions in the secondary cell wall but similar GGM labeling patterns. No significant differences were observed in labeling after delignification of CW tracheids.