Self-assembly as the underlying mechanism for exine development in Larix decidua D. C

Mechanisms of pollen wall development in Lysimachia vulgaris

Exine, this complex sporopollenin-containing and highly variable among taxa envelope of the male gametophyte, consists of two layers, ectexine and endexine. We traced in detail the pollen wall development in Lysimachia vulgaris (Primulaceae), with emphasis on driving forces and critical ontogenetic time. By observation on the sequence of the emergent patterns and by analysis of their substructure with TEM, we intended to clarify the obvious and not-obvious ways of exine construction and to find out the common features in pattern development in other representatives in living nature. The ectexine and endexine ontogeny follows the main stages observed in many other species: first, the appearance of microspore plasma membrane invaginations with isotropic contents within, changed later to anisotropic state; then successive appearance of spherical, rod-like, and lamellate units in the periplasmic space. The lamellate endexine appears unusually early in the exine development. All these elements and their aggregations are manifestation of well-known physical phenomena: phase separation and micellar self-assembly. A consideration of similar surface patterns in very remote taxa suggests the participation in their development of some general nature phenomena as the lows of space-filling operations.

Pollen wall development in Hydrangea bretschneiderii Dippel. (Hydrangeaceae): advanced interpretation through physical input, with in vitro experimental verification

We aimed to unravel the underlying mechanisms of pollen wall development in Hydrangea bretschneiderii. For this, we tested our hypothesis that distinct physical processes, phase separation and micellar self-assembly, underpinned exine development by taking the substances, determined by the genome, through several phase transitions. We traced each developmental stage with TEM; then, we obtained in vitro simulations corresponding to those stages. The main steps of exine ontogeny observed in the microspore periplasmic space were initiated with phase separation, resulting in the conversion of homogeneous contents to heterogeneous two-layered state of the material. After each step of phase, separation self-assembly picked up the initiative and took the substances through the sequence of micellar mesophases which were the base for all the exine structures. These mesophases are as follows: spherical micelles, transforming first into columns, and then to cylindrical micelles which turn to columellae after initial sporopollenin accumulation. The tectum appeared along the interface of the phase separated material. After the tetrad disintegration and the next phase separation, laminate mesophase appeared being the base for the endexine lamellae. Then, a new step of phase separation at aperture sites brought the appearance of a granular endexine layer; the latter became intermixed finally with lamellae. This gives, together with experimental simulation, strong evidence that the genome "shifts a part of work" on exine formation onto physical processes, and the latter are an inherent mechanism of evolution.

An integral insight into pollen wall development: involvement of physical processes in exine ontogeny in Calycanthus floridus L., with an experimental approach

We aimed to understand the underlying mechanisms of development in the sporopollenin-containing part of the pollen wall, the exine, one of the most complex cell walls in plants. Our hypothesis is that distinct physical processes, phase separation and micellar self-assembly, underpinexine development by taking the molecular building blocks, determined and synthesised by the genome, through several phase transitions. To test this hypothesis, we traced each stage of microspore development in Calycanthus floridus with transmission electron microscopy and then generated in vitro experimental simulations corresponding to every developmental stage. The sequence of structures observed within the periplasmic space around developing microspores starts with spherical units, which are rearranged into columns to then form rod-like units (the young columellae) and, finally, white line centred endexine lamellae. Phase separation precedes each developmental stage. The set of experimental simulations, obtained as self-assembled micellar mesophases formed at the interface between lipid and water compartments, was the same: spherical micelles; columns of spherical micelles; cylindrical micelles; and laminate micelles, separated by gaps, resembling white-lined lamellae. Thus, patterns simulating structures observed at the main stages of exine development in C. floridus were obtained from in vitro experiments, and hence purely physicochemical processes can construct exine-like patterns. This highlights the important part played by physical processes that are not under direct genomic control and share influence on the emerging ultrastructure with the genome during exine development. These findings suggest that a new approach to ontogenetic studies, including a consideration of physical factors, is required for a better understanding of developmental processes.

The Role of Cutinsomes in Plant Cuticle Formation

The cuticle commonly appears as a continuous lipophilic layer located at the outer epidermal cell walls of land plants. Cutin and waxes are its main components. Two methods for cutin synthesis are considered in plants. One that is based on enzymatic biosynthesis, in which cutin synthase (CUS) is involved, is well-known and commonly accepted. The other assumes the participation of specific nanostructures, cutinsomes, which are formed in physicochemical self-assembly processes from cutin precursors without enzyme involvement. Cutinsomes are formed in ground cytoplasm or, in some species, in specific cytoplasmic domains, lipotubuloid metabolons (LMs), and are most probably translocated via microtubules toward the cuticle-covered cell wall. Cutinsomes may additionally serve as platforms transporting cuticular enzymes. Presumably, cutinsomes enrich the cuticle in branched and cross-linked esterified polyhydroxy fatty acid oligomers, while CUS1 can provide both linear chains and branching cutin oligomers. These two systems of cuticle formation seem to co-operate on the surface of aboveground organs, as well as in the embryo and seed coat epidermis. This review focuses on the role that cutinsomes play in cuticle biosynthesis in S. lycopersicum, O. umbellatum and A. thaliana, which have been studied so far; however, these nanoparticles may be commonly involved in this process in different plants.

Artificial pollen walls simulated by the tandem processes of phase separation and self-assembly in vitro

Despite numerous attempts to elucidate the developmental mechanisms responsible for the observed diversity of pollen and spore walls, the processes involved remained obscure until the structures observed during exine development were recognized as a sequence of self-assembling micellar mesophases. To confirm this, a series of in vitro experiments was undertaken in which exine-like patterns were generated in colloidal mixtures by self-assembly, without any genomic participation. The intention was to test whether all the main types of exine structure could be simulated experimentally. Mixtures of substances, analogous to those involved in microspore development, were left undisturbed while water evaporated and self-assembly occurred. We varied the substances, their combinations and concentrations, and the physical constraints to make the experiments closer to the situation in nature. The resulting dry films were then examined using transmission electron microscopy. A variety of microstructures, simulating the full range of exine types, was obtained by micellar self-assembly. Moreover, the signs of related physicochemical process (i.e. phase separation) were also observed. Simple, energy-efficient, physical-chemical interactions, phase separation and self-assembly, are capable of generating exine-like patterns, providing evidence that these processes share control of exine formation with the well-documented program of gene expression.

Mimicking pollen and spore walls: self-assembly in action

BACKGROUND AND AIMS

Decades of research have attempted to elucidate the underlying developmental mechanisms that give rise to the enormous diversity of pollen and spore exines. The organization of the exine starts with the establishment of an elaborate glycocalyx within which the subsequent accumulation of sporopollenin occurs. Ontogenetic studies using transmission electron microscopy of over 30 species from many different groups have shown that the sequence of structures observed during development of the exine corresponds to the sequence of self-assembling micellar mesophases (including liquid crystals) observed at increasing concentrations of surfactants. This suggested that self-assembly plays an important part in exine pattern determination. Some patterns resembling separate layers of spore and pollen grain walls have been obtained experimentally, in vitro, by self-assembly. However, to firmly establish this idea, columellate and granulate exines, the most widespread forms, needed to be simulated experimentally.

METHODS

We used our original method, preparing mixtures of substances analogous to those known to occur in the periplasmic space of developing microspores, then leaving the mixtures undisturbed for specific periods of time to allow the process of self-assembly to occur. We developed our method further by using new substances analogous to those present in the periplasmic space and performing the experiments in a thin layer, more closely resembling the dimensions of the periplasmic space.

KEY RESULTS

The artificial microstructures obtained from our in vitro self-assembly experiments closely resembled the main types of exines, including tectate-columellate, granulate, alveolate and structureless, and permitted comparison with both developing and mature microspore walls. Compared with the previous attempts, we managed to simulate columellate and granulate exines, including lamellate endexine.

CONCLUSIONS

Our results show that simple physico-chemical interactions are able to generate patterns resembling those found in exines, supporting the idea that exine development in nature involves an interplay between the genome and self-assembly.

Suggested mechanisms underlying pollen wall development in Ambrosia trifida (Asteraceae: Heliantheae)

By a detailed ontogenetic study of Ambrosia trifida pollen, tracing each stage of development with TEM, we aim to understand the establishment of the pollen wall and to unravel the mechanisms underlying sporoderm development. The main steps of exine ontogeny in Ambrosia trifida, observed in the microspore periplasmic space, are as follows: spherical units, gradually transforming into columns, then to rod-like units; the appearance of the initial reticulate tectum; growth of columellae under the tectum and initial sporopollenin accumulation on them; the appearance of the endexine lamellae, first in fragments, then in long laminae; the cessation of the glycocalyx growth and its detachment from the plasma membrane, resulting in the appearance of gaps; massive accumulation of sporopollenin on the tectum, columellae, and endexine, and the appearance of the foot layer at the young post-tetrad stage, accompanied by establishment of caveae in sites of the former gaps; and final massive sporopollenin accumulation. This sequence of developmental events in all probability corresponds to the sequence of self-assembling micellar mesophases. This gives (together with earlier findings and experimental modeling of exine) strong evidence that the genome and self-assembly share control of exine formation. In this sense, self-assembly itself can be seen as an inherent mechanism of evolution.

Assembling the thickest plant cell wall: exine development in Echinops (Asteraceae, Cynareae)

The exceptionally complex exine of Echinops, representing a significant investment of energy, develops from an elaborate glycocalyx which establishes, by self-assembly, a multi-layered system of micelles upon which sporopollenin polymerizes. We report on pollen development in two species of Echinops (Asteraceae, Cynareae) studied using transmission and scanning electron microscopy with an emphasis on the organisation and development of the massive sporoderm (maximum thickness 18 μm). The major events of exine deposition during the tetrad stage follow the now familiar sequence of self-assembling micellar mesophases and the subsequent incorporation of sporopollenin, observed here as: (1) spherical units with light cores; (2) columns of spherical units with dark cores; (3) large branched macromolecules arranged in a dendritic, three-dimensional network of long alveoli; and (4) alveoli with electron-transparent cores and dense walls. Later, (5) the primexine exhibits an elongated-alveolate pattern in which the alveoli have electron-dense cores and lighter exteriors. When (6) the thick inner columellae make contact with the outer primexine, sporopollenin accumulation in the cores of the primexine alveolae establishes continuity between the inner and outer columellae. In the free microspore stage, (7) the foot layer and first lamellae of the endexine appear (8). The endexine lamellae then increase in number and massive accumulation of sporopollenin occurs on all exine elements, making individual elements such as tectal spines, more pronounced. These and earlier findings, as well as experimental simulations of exine development, show that pollen wall morphogenesis involves a subtle interplay of gene-driven biological processes and physico-chemical factors offering abundant opportunities for the generation of complex, taxon-specific patterns.