Eco-friendly microbial route to synthesize cobalt nanoparticles using Bacillus thuringiensis against malaria and dengue vectors

Cobalt Oxide Nanoparticle Synthesis by Cell-Surface-Engineered Recombinant Escherichia coli and Potential Application for Anticancer Treatment

Cell surface display engineering facilitated the development of a cobalt-binding hybrid Escherichia coli. OmpC served as the molecular anchor for showcasing the cobalt-binding peptides (CBPs), creating the structural model of the hybrid OmpC-CBPs (OmpC-CP, OmpC-CF). Subsequently, the recombinant peptide's cobalt adsorption and retrieval effectiveness were evaluated at various concentrations. When subjected to a pH of 7 and a concentration of 2 mM, OmpC-CF exhibited a significantly higher cobalt recovery rate (2183.87 mol/g DCW) than OmpC-CP. The strain with bioadsorbed cobalt underwent thermal treatment at varying temperatures (400 °C, 500 °C, 600 °C, and 700 °C) and morphological characterization of the thermally decomposed cobalt nanoparticle oxides using diverse spectroscopy techniques. The analysis showed that nanoparticles confined themselves to metal ions, and EDS mapping detected the presence of cobalt on the cell surface. Finally, the nanoparticles' anticancer potential was assessed by subjecting them to heating at 500 °C in a furnace; they demonstrated noteworthy cytotoxicity, as evidenced by IC50 values of 59 μg/mL. These findings suggest that these nanoparticles hold promise as potential anticancer agents. Overall, this study successfully engineered a recombinant E. coli capable of efficiently binding to cobalt, producing nanoparticles with anticancer properties. The results of this investigation could have significant implications for advancing novel cancer therapies.

Surface engineered recombinant Escherichia coli for the potential application of the cobalt contaminated wastewater treatment and the photocatalytic dye degradation

The novel recombinant Escherichia coli strain was construct through cell surface display for the treatment of cobalt contaminated wastewater and dye contaminated wastewater. First, structural analysis of known cobalt binding peptide was conducted and core binding sites were figured out which showing better cobalt binding ability. The cobalt peptides were attached to OmpC to construct cobalt adsorbing recombinant Escherichia coli. The recombinant strain efficiently absorbed and retrieved cobalt from cobalt wastewater by adsorbing 1895 µmol/g DCW of cobalt. Following adsorption, cobalt nanoparticles were synthesized through thermal decomposition of cobalt adsorbed recombinant strain at 500˚C. The nanoparticles exhibited noteworthy photocatalytic properties, demonstrating a substantial capacity for degrading dyes when used as a catalyst at a concentration of 10 mg/dl. These results presenting potential solutions for effective and environmentally friendly approaches to address cobalt and dye contaminated wastewater treatment process.

Rapid and label-free A2 peptide epitope decorated CoFe2O4-C60 nanocomposite-based electrochemical immunosensor for detecting Visceral Leishmaniasis

Diagnosis of Visceral Leishmaniasis is challenging due to the shared clinical features with malaria, typhoid, and tuberculosis. A CoFe2O4-C60 nanocomposite-based immunosensor decorated with a sensitive A2 peptide antigen was fabricated to detect anti-A2 antibodies for application in visceral leishmaniasis diagnosis. The flame-synthesised nanocomposite was characterised using Fourier Transform Infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDX), Raman spectroscopy and electrochemical impedance spectroscopy (EIS) techniques. N terminated specific A2 peptide epitope antigen (NH2-QSVGPLSVGP-OH) was synthesised and characterised by high-performance liquid chromatography (HPLC) and liquid chromatography-mass spectroscopy (LC-MS). Using EDC/NHS, A2 peptide antigen (Apg) was immobilised on the CoFe2O4-C60-modified electrode. The performance of the immunosensor, Apg-CoFe2O4-C60NP/GCE, was evaluated by testing its ability to detect varying concentrations of anti-A2 antibody solution in PBS and spiked serum with 1 mM [Fe(CN)6]3-/4- in 0.01 M PBS (pH 7.4) as supporting electrolyte. using differential pulse voltammetry. The immunosensor showed excellent reproducibility and a linear range of 10-10-10-1 µg/mL, with an experimental detection limit of 30.34 fg/mL. These results suggest that the fabricated sensor has great potential as a tool for diagnosing visceral leishmaniasis.

Pectin Nanoparticle-Loaded Soft Coral Nephthea sp. Extract as In Situ Gel Enhances Chronic Wound Healing: In Vitro, In Vivo, and In Silico Studies

This study shed light for the first time on the in vivo diabetic wound healing potential activity of natural marine soft coral polymeric nanoparticle in situ gel using an excision wound model. A Nephthea sp. methanol-methylene chloride extract loaded with pectin nanoparticles (LPNs) was created. For the preparation of in situ gel, ion-gelation techniques, the entrapment efficiency, the particle size, the polydispersity index, the zeta potential, the in-vitro drug release, and a transmission electron microscope were used and the best formula was selected. Using (UPLC-Q/TOF-MS), 27 secondary metabolites responsible for extract biological activity were identified. Isolation and identification of arachidic acid, oleic acid, nervonic acid, and bis-(2-ethylhexyl)-phthalate (DEHP) of Nephthea sp. was firstly reported here using NMR and mass spectral analyses. Moreover, LPN in situ gel has the best effects on regulating the proinflammatory cytokines (NF-κB, TNF-α, IL-6, and IL-1β) that were detected on days 7 and 15. The results were confirmed with an in vitro enzymatic inhibitory effect of the extract against glycogen synthase kinase (GSK-3) and matrix metalloproteinase-1 (MMP-1), with IC₅₀ values of 0.178 ± 0.009 and 0.258 ± 0.011 µg/mL, respectively. The molecular docking study showed a free binding energy of -9.6 kcal/mol for chabrolosteroid E, with the highest binding affinity for the enzyme (GSK-3), while isogosterone B had -7.8 kcal/mol for the enzyme (MMP-1). A pharmacokinetics study for chabrolohydroxybenzoquinone F and isogosterone B was performed, and it predicted the mode of action of wound healing activity.

The Effect of Silicon Dioxide Nanoparticles Combined with Entomopathogenic Bacteria or Fungus on the Survival of Colorado Potato Beetle and Cabbage Beetles

Three types of modified silicon dioxide nanoparticles (SiO2, 10−20 nm) with additives of epoxy, silane and amino groups, used independently and in combination with the entomopathogenic bacteria Bacillus thuringiensis subsp. morrisoni and fungus Metarhizium robertsii were tested against Colorado potato beetle (Leptinotarsa decemlineata) and cabbage beetles (Phyllotreta spp.). All three nanoparticles were found to have an entomocidal effect on Colorado potato beetle larvae and crucifer flea beetles when ingested. Increased susceptibility of insects to B. thuringiensis or M. robertsii blastospores and their metabolites was shown after exposure to the modified silicon dioxide nanoparticles. The potential of modified silicon dioxide nanoparticles to enhance the efficiency of biopesticides based on the bacteria B. thuringiensis and fungi M. robertsii is considered in the paper.

Assessment of combining biosynthesized silver nanoparticles using Bacillus thuringiensis and gamma irradiation for controlling Pectinophora gossypiella (saunders) (lepidoptera: Gelechiidae)

PURPOSE

Combining gamma irradiation and nanotechnology has become one of the most promising new approaches for area-wide (AW) pest management in recent years. The laboratory trials were conducted to determine the combining effects of BT-AgNPs and gamma irradiation for controlling P. gossypiella. Radio-sensitivity of male pupae at different doses of gamma radiation and the effectiveness of biosynthesized silver nanoparticles using Bacillus thuringiensis on larval instar were assayed. Additionally, the ultrastructure changes on the alimentary canal of 4th instar larvae were studied to evaluate the impact of the combined approach at a cellular level.

MATERIALS AND METHODS

Laboratory- rearing technique was used for rearing Pectinophora gossypiella. The irradiation process was achieved at Co60 - Gamma Chamber (4000 A). Alanine dosimeters were used for measuring the average absorbed dose and dose mapping. Preparation of Silver nanoparticles (AgNPs) using Bacillus thuringiensis (Bt) and their characterization has been investigated. The treated 4th instar larvae by gamma irradiation or ∕and BT-AgNPs were dissected under the stereo microscope. The alimentary canal was obtained anatomically and Transmission Electron Microscope) was used in examining the stained sections.

RESULTS

Based on the nonhatching eggs produced by irradiated males' pupae, the values of effective doses were calculated. The effective doses ranged from 16 to 291 Gy for the ED25 - ED75. The sterility index reached 74.1% when irradiated with males by 291 Gy crossed with nonirradiated females and the adult emergence decreased to be 35.3%. The insecticidal potential of Bt-AgNPs on the 2nd and 4th larval instars was dose-dependent and its LC50 toxicity value was 0. 3 and 0. 4 mg/ml, respectively. The lethal concentration LC50 of the 2nd instar larvae increased the larval and pupal mortality to 55% and 44.4%, respectively, and reduced the adult emergence to be 55.6%. The combining effects of Bt-AgNPs with 291 Gy induced 100% pupae mortality and there was no adult emergence in F1 generation. Such effects also severed the ultrastructure deformity of the midgut of the 4th instar larvae after the two-day post-treatment.

CONCLUSIONS

The combining effects are recommended as an effective IPM program to control P. gossypiella by releasing sterile males (derived from pupae irradiated with 291 Gy) crossing with the normal females in the field, and reducing the fertility of the population to 31.2%. Subsequently, the resulted larvae treated with LC50 of Bt-AgNPs prevented the adult emergence and stopped the life cycle of P. gossypiella.

Elucidation of larvicidal potential of metallic and environment friendly food-grade nanostructures against Aedes albopictus

To combat health challenges associated with mosquito-borne diseases, the larvicidal activity of metallic nanoparticles, food-grade polymeric nano-capsules and insecticides was investigated against larvae of Aedes albopictus as an effective alternate control approach. The Ae. albopictus was identified using sequencing and phylogenetic analyses of COXI, CYTB and ITS2 genes. The characterization of synthesized nanostructures was performed through Zetasizer, UV-VIS spectroscopy, atomic force microscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy. The mosquito larvae were exposed to varying concentration of nanostructures and insecticides, and their percentage mortality was evaluated at different time intervals of 24 h and 48 h exposure. The highest efficacy was observed in zinc oxide nanoparticles (ZnO-NPs) and polymeric nanocapsules FG-Cur E-III (LC50 = 0.24 mg/L, LC90 = 0.6 mg/L) and (LC50 = 3.8 mg/L, LC90 = 9.33 mg/L), respectively, after 24 h; while (LC50 = 0.18 mg/L, LC90 = 0.43 mg/L) and (LC50 = 1.95 mg/L, LC90 = 6.46 mg/L), respectively, after 48 h against fourth instar larvae of Ae. albopictus. Ag, CuO, NiTiO3 and CoTiO3 nanoparticles evaluated in this study also showed promising larvicidal activity. Although ZnO-NPs proved to be effective larvicides, their possible toxicity (producing ROS species) can limit their use. The curcumin nanostructures (FG-Cur E-III) stabilized by food-grade materials are thought to exert their larvicidal activity by binding to sterol carrier protein-2, and depriving the larvae from the essential dietary cholesterol, and bears effective larvicidal potential as safe alternative for chemical larvicides, due to their environment friendly, food-grade and easy biodegradability.

Green fabrication of Co and Co3O4 nanoparticles and their biomedical applications: A review

Nanotechnology is the fabrication, characterization, and potential application of various materials at the nanoscale. Over the past few decades, nanomaterials have attracted researchers from different fields because of their high surface-to-volume ratio and other unique and remarkable properties. Cobalt and cobalt oxide nanoparticles (NPs) have various biomedical applications because of their distinctive antioxidant, antimicrobial, antifungal, anticancer, larvicidal, antileishmanial, anticholinergic, wound healing, and antidiabetic properties. In addition to biomedical applications, cobalt and cobalt oxide NPs have been widely used in lithium-ion batteries, pigments and dyes, electronic thin film, capacitors, gas sensors, heterogeneous catalysis, and for environmental remediation purposes. Different chemical and physical approaches have been used to synthesize cobalt and cobalt oxide NPs; however, these methods could be associated with eco-toxicity, cost-effectiveness, high energy, and time consumption. Recently, an eco-friendly, safe, easy, and simple method has been developed by researchers, which uses biotic resources such as plant extract, microorganisms, algae, and other biomolecules such as starch and gelatin. Such biogenic cobalt and cobalt oxide NPs offer more advantages over other physicochemically synthesized methods. In this review, we have summarized the recent literature for the understanding of green synthesis of cobalt and cobalt oxide NPs, their characterization, and various biomedical applications.

Effects of Shape and Size of Cobalt Phosphate Nanoparticles against Acanthamoeba castellanii

T4 genotype Acanthamoeba are opportunistic pathogens that cause two types of infections, including vision-threatening Acanthamoeba keratitis (AK) and a fatal brain infection known as granulomatous amoebic encephalitis (GAE). Due to the existence of ineffective treatments against Acanthamoeba, it has become a potential threat to all contact lens users and immunocompromised patients. Metal nanoparticles have been proven to have various antimicrobial properties against bacteria, fungi, and parasites. Previously, different types of cobalt nanoparticles showed some promise as anti-acanthamoebic agents. In this study, the objectives were to synthesize and characterize the size, morphology, and crystalline structure of cobalt phosphate nanoparticles, as well as to determine the effects of different sizes of cobalt metal-based nanoparticles against A. castellanii. Cobalt phosphate octahydrate (CHP), Co₃(PO₄)₂•8H₂O, was synthesized by ultrasonication using a horn sonicator, then three different sizes of cobalt phosphates Co₃(PO₄)₂ were produced through calcination of Co₃(PO₄)₂•8H₂O at 200 °C, 400 °C and 600 °C (CP2, CP4, CP6). These three types of cobalt phosphate nanoparticles were characterized using a field emission scanning electron microscope (FESEM), energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) analysis. Next, the synthesized nanoparticles were subjected to biological assays to investigate their amoebicidal, amoebistatic, anti-encystation, and anti-excystation effects against A. castellanii, as well as cell cytotoxicity. The overall results showed that 1.30 ± 0.70 µm of CHP microflakes demonstrated the best anti-acanthemoebic effects at 100 µg/mL, followed by 612.50 ± 165.94 nm large CP6 nanograins. However, amongst the three tested cobalt phosphates, Co₃(PO₄)₂, the smaller nanoparticles had stronger antiamoebic effects against A. castellanii. During cell cytotoxicity analysis, CHP exhibited only 15% cytotoxicity against HeLa cells, whereas CP6 caused 46% (the highest) cell cytotoxicity at the highest concentration, respectively. Moreover, the composition and morphology of nanoparticles is suggested to be important in determining their anti-acathamoebic effects. However, the molecular mechanisms of cobalt phosphate nanoparticles are still unidentified. Nevertheless, the results suggested that cobalt phosphate nanoparticles hold potential for development of nanodrugs against Acanthamoeba.

Cobalt nanoparticles as novel nanotherapeutics against Acanthamoeba castellanii

Background

Species of Acanthamoeba are facultative pathogens which can cause sight threatening Acanthamoeba keratitis and a rare but deadly brain infection, granulomatous amoebic encephalitis. Due to conversion of Acanthamoeba trophozoites to resistant cyst stage, most drugs are found to be ineffective at preventing recurrence of infection. This study was designed to test the antiacanthamoebic effects of different cobalt nanoparticles (CoNPs) against trophozoites and cysts, as well as parasite-mediated host cell cytotoxicity.

Methods

Three different varieties of CoNPs were synthesized by utilizing hydrothermal and ultrasonication methods and were thoroughly characterized by X-ray diffraction and field emission scanning electron microscopy. Amoebicidal, encystation, excystation, and host cell cytopathogenicity assays were conducted to study the antiacanthamoebic effects of CoNPs.

Results

The results of the antimicrobial evaluation revealed that cobalt phosphate Co₃(PO₄)₂ hexagonal microflakes, and 100 nm large cobalt hydroxide (Co(OH)₂) nanoflakes showed potent amoebicidal activity at 100 and 10 µg/ml against Acanthamoeba castellanii as compared to granular cobalt oxide (Co₃O₄) of size 35–40 nm. Furthermore, encystation and excystation assays also showed consistent inhibition at 100 µg/ml. CoNPs also inhibited amoebae-mediated host cell cytotoxicity as determined by lactate dehydrogenase release without causing significant damage to human cells when treated alone.

Conclusions

To our knowledge, these findings determined, for the first time, the effects of composition, size and morphology of CoNPs against A. castellanii. Co₃(PO₄)₂ hexagonal microflakes showed the most promising antiamoebic effects as compared to Co(OH)₂ nanoflakes and granular Co₃O₄. The results reported in the present study hold potential for the development of antiamoebic nanomedicine.

Nano-biotechnology: a new approach to treat and prevent malaria

Malaria, the exterminator of ~1.5 to 2.7 million human lives yearly, is a notorious disease known throughout the world. The eradication of this disease is difficult and a challenge to scientists. Vector elimination and effective chemotherapy for the patients are key tactics to be used in the fight against malaria. However, drug resistance and environmental and social concerns are the main hurdles in this fight against malaria. Overcoming these limitations is the major challenge for the 21st-century malarial researchers. Adapting the principles of nano-biotechnology to both vector control and patient therapy is the only solution to the problem. Several compounds such as lipids, proteins, nucleic acid and metallic nanoparticles (NPs) have been successfully used for the control of this lethal malaria disease. Other useful natural reagents such as microbes and their products, carbohydrates, vitamins, plant extracts and biodegradable polymers, are also used to control this disease. Among these particles, the plant-based particles such as leaf, root, stem, latex, and seed give the best antagonistic response against malaria. In the present review, we describe certain efforts related to the control, prevention and treatment of malaria. We hope that this review will open new doors for malarial research.

A facile and rapid method for green synthesis of Achyranthes aspera stem extract-mediated silver nano-composites with cidal potential against Aedes aegypti L

Aedes aegypti L. is the primary vector associated with transmission of globally concerned diseases; Zika, yellow fever, dengue and Chikungunya. Present study investigates an efficient, alternative and comparative approach for mosquito control which is safe to environment and non-target organisms. The silver nano-composites (AgNCs) were synthesized from the aqueous stem extract of Achyranthes aspera (AASE) using different concentration of aqueous silver nitrate (AgNO₃). The synthesis was tracked by UV-vis spectrophotometer and particle size analyser (DLS). The evaluation of their larvicidal potential against early fourth instars of Ae. aegypti showed significant potency, the toxicity increasing with the concentration of silver nitrate. The 24, 48 and 72 h bioassays resulted in respective LC₅₀ values of 26.693, 1.113 and 0.610 μg/mL (3 mM AASE-AgNO₃) 9.119, 0.420 and 0.407 μg/mL (4 mM AASE-AgNO₃) and that of 4.283, 0.3 and 0.248 μg/mL (5 mM AASE-AgNO₃). Keeping in view the significantly high larvicidal efficiency at lower concentration of silver nitrate, the 4 mM nano-composites were selected over 5 mM composites for further biophysical characterization carried out by X-ray Diffraction (XRD), Fourier transform infrared spectrometer (FTIR), Scanning electron microscopy (SEM), Energy dispersive X-ray (EDX) spectroscopy and Transmission electron microscopy (TEM). SEM and TEM confirmed the synthesis of spherical poly-dispersed AgNCs with average size ranging from 1-30 nm. Characterization through XRD showed the crystalline face-centered-cubic (fcc) structure of AgNCs with the highest intense peak obtained at 2θ value of 31.82°. FT-IR data suggests complex nature of AgNCs showing clearly defined peaks in different ranges. The present investigations recommend AgNCs of A. aspera stems as a low-cost and eco-friendly alternative to chemical insecticides for mosquito control.

Bacillus thuringiensis: a successful insecticide with new environmental features and tidings

Bacillus thuringiensis (Bt) is known as the most successful microbial insecticide against different orders of insect pests in agriculture and medicine. Moreover, Bt toxin genes also have been efficiently used to enhance resistance to insect pests in genetically modified crops. In light of the scientific advantages of new molecular biology technologies, recently, some other new potentials of Bt have been explored. These new environmental features include the toxicity against nematodes, mites, and ticks, antagonistic effects against plant and animal pathogenic bacteria and fungi, plant growth-promoting activities (PGPR), bioremediation of different heavy metals and other pollutants, biosynthesis of metal nanoparticles, production of polyhydroxyalkanoate biopolymer, and anticancer activities (due to parasporins). This review comprehensively describes recent advances in the Bt whole-genome studies, the last updated known Bt toxins and their functions, and application of cry genes in plant genetic engineering. Moreover, the review thoroughly describes the new features of Bt which make it a suitable cell factory that might be used for production of different novel valuable bioproducts.

Nanoparticles as potential new generation broad spectrum antimicrobial agents

The rapid emergence of antimicrobial resistant strains to conventional antimicrobial agents has complicated and prolonged infection treatment and increased mortality risk globally. Furthermore, some of the conventional antimicrobial agents are unable to cross certain cell membranes thus, restricting treatment of intracellular pathogens. Therefore, the disease-causing-organisms tend to persist in these cells. However, the emergence of nanoparticle (NP) technology has come with the promising broad spectrum NP-antimicrobial agents due to their vast physiochemical and functionalization properties. In fact, NP-antimicrobial agents are able to unlock the restrictions experienced by conventional antimicrobial agents. This review discusses the status quo of NP-antimicrobial agents as potent broad spectrum antimicrobial agents, sterilization and wound healing agents, and sustained inhibitors of intracellular pathogens. Indeed, the perspective of developing potent NP-antimicrobial agents that carry multiple-functionality will revolutionize clinical medicine and play a significant role in alleviating disease burden.

Virulency of novel nanolarvicide from Trichoderma atroviride against Aedes aegypti (Linn.): a CLSM analysis

Aedes aegypti is the vector for transmitting dengue, chikungunya, and yellow fever. These diseases' transmission has increased predominantly in urban and semi-urban areas as a major public health concern. In present investigation, Trichoderma atroviride culture filtrates were used for the synthesis of silver nanoparticle. Moreover, T. atroviride is a free-living and rapidly growing fungi common in soil and root ecosystem. This fungi is an exceptionally good model for biocontrol and more significant as a bioagent. T. atroviride was grown in malt extract. T. atroviride culture filtrates were exposed to silver nitrates solution for 24 h at 25 °C for the synthesis of silver nanoparticles (AgNPs). These AgNPs were characterized to find their unique properties with UV-visible spectrophotometer and transmission electron microscope (TEM) analysis. The T. atroviride culture filtrates have formed hexagonal (diamond shape) AgNPs with the range of size of 14.01-21.02 nm. These AgNPs have shown significant efficacies against first, second, third, and fourth instar larvae of A. aegypti. The LC90 and LC99 values for the first instar were 1 and 3 ppm, second instar 2 and 3.18 ppm, third instar 3.12 and 4.12 ppm, and fourth instar 6.30 and 6.59 ppm, respectively, after an exposure of 7 h. The confocal laser scanning microscopy (CLSM) studies were verdict that these AgNPs embedded in the cuticle of larvae and cause instant lethality in 7 h. Present investigations have demonstrated that the AgNPs of T. atroviride culture filtrates synthesized can be used for larvae control of A. aegypti. T. atroviride is synthesized to silver nanoparticles to be a promising new candidate for application in mosquito control. We therefore suggested that the ability of T. atroviride culture filtrates in synthesis can also be explored for synthesizing silver nanoparticles for commercial exploitation.

Green nanoparticles for mosquito control

Here, we have used the green method for synthesis of silver and gold nanoparticles. In the present study the silver (Ag) and gold (Au) nanoparticles (NPs) were synthesized by using the aqueous bark extract of Indian spice dalchini (Cinnamomum zeylanicum) (C. zyelanicum or C. verum J. Presl). Additionally, we have used these synthesized nanoparticles for mosquito control. The larvicidal activity has been tested against the malaria vector Anopheles stephensi and filariasis vector Culex quinquefasciatus. The results were obtained using UV-visible spectrophotometer and the images were recorded with a transmission electron microscope (TEM). The efficacy tests were then performed at different concentrations and varying numbers of hours by probit analysis. The synthesized AgNPs were in spherical shape and average sizes (11.77 nm AgNPs and 46.48 nm AuNPs). The larvae of An. stephensi were found highly susceptible to the synthesized AgNPs and AuNPs than the Cx. quinquefasciatus. These results suggest that the C. zeylanicum synthesized silver and gold nanoparticles have the potential to be used as an ideal ecofriendly approach for the control of mosquito.