Immobilization of Candida rugosa lipase onto an eco-friendly support in the presence of ionic liquid

Lipase immobilization on biodegradable film with sericin

An ecofriendly and low-cost film composed by cassava starch, polyvinyl alcohol, and sericin blend (CS-PVA-SS) was synthesized, characterized, and applied as a novel support for Botryosphaeria ribis EC-01 lipase immobilization by enzyme-film-enzyme adsorption. Film revealed thickness between 230 and 309 μm and higher flexibility and malleability in comparison with film without SS. Based on p-nitrophenyl palmitate hydrolysis reaction, the activity retention of immobilized lipase was 987%. For optimal conditions, the yield in ethyl oleate was 95% for immobilized enzyme. Maximum yield was obtained at 49°C, molar ratio oleic acid:ethanol of 1:3, 1.25 g lipase film or 50 U (1.03 ± 0.03 mg protein) and 30 h. Even after seven cycles of use, immobilized lipase showed 52% reduction in ester yield. Biodegradable and biorenewable film is a promising material as a support to immobilize lipases and application in biocatalysis.

Magnetic responsive Thermomyces lanuginosus lipase for biodiesel synthesis

The low cost lipase derived from Thermomyces lanugionous was chosen to conjugate with Fe₃O₄ nanoparitcles as a magnetic responsive lipase (MRL) biocatalyst. The structure of MRL was observed by atomic force microscopy (AFM). The Fourier transform infrared (FTIR) spectroscopy analysis confirmed the lipase conjugated to Fe₃O₄ nanoparticles. Optimized conditions for the process of biodiesel production by MRL were investigated by the response surface methodology (RSM) and the Box-Behnken design (BBD). The optimized conditions for biodiesel production by MRL were as follows. The molar ratio of methanol to oil was 4.0, water content was 1.5 % as oil weight, the dosage of MRL to oil was 9.0 % (W/W) under 41 °C for 28 h. Under the optimized conditions, the yield of FAMEs by MRL reached 82.20 %. Further experiments showed that the MRL could be used 10 cycles and the yield of FAMEs decreased slightly by 10.97 %. These results indicated that Fe₃O₄ nanoparticle carrier could efficiently improve the FAMEs synthesis and enhance the MRL stabilization and reusability in the biodiesel production.

Chitin-lignin material as a novel matrix for enzyme immobilization

Innovative materials were made via the combination of chitin and lignin, and the immobilization of lipase from Aspergillus niger. Analysis by techniques including FTIR, XPS and 13C CP MAS NMR confirmed the effective immobilization of the enzyme on the surface of the composite support. The electrokinetic properties of the resulting systems were also determined. Results obtained from elemental analysis and by the Bradford method enabled the determination of optimum parameters for the immobilization process. Based on the hydrolysis reaction of para-nitrophenyl palmitate, a determination was made of the catalytic activity, thermal and pH stability, and reusability. The systems with immobilized enzymes were found to have a hydrolytic activity of 5.72 mU, and increased thermal and pH stability compared with the native lipase. The products were also shown to retain approximately 80% of their initial catalytic activity, even after 20 reaction cycles. The immobilization process, using a cheap, non-toxic matrix of natural origin, leads to systems with potential applications in wastewater remediation processes and in biosensors.