A lipase with broad solvent stability from Burkholderia cepacia RQ3: isolation, characteristics and application for chiral resolution of 1-phenylethanol

Purification and characterization of extracellular lipase from a thermotolerant strain: Bacillus subtilis TTP-06

In current study, lipase from a thermotolerant Bacillus subtilis TTP-06 was purified in a stepwise manner by using ammonium sulfate precipitation and column chromatography. Thenceforth, it was subjected to sodium dodecyl sulfate- and native-polyacrylamide gel electrophoresis to check the homogeneity of the purified enzyme. The ideal substrate concentration, pH, temperature, reaction duration and lipase specificity were identified. With a yield of 11.02%, purified lipase displayed activity of 8.51 U/mg. Thenceforward, the homogeneously purified enzyme was considered to be a homo-dimer of 30 kDa subunits. Enzyme had Km and Vmax value of 9.498 mM and 19.92 mol mg-1 min-1, respectively. Additionally, the matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) method was used to investigate the purified lipase and estimate its 3-D structure, which revealed a catalytic triad of serine, aspartate and histidine.

Characterization of a New Thermostable and Organic Solution-Tolerant Lipase from Pseudomonas fluorescens and Its Application in the Enrichment of Polyunsaturated Fatty Acids

The search for and characterization of new lipases with excellent properties has always been urgent and is of great importance to meet industrial needs. In this study, a new lipase, lipB, from Pseudomonas fluorescens SBW25, belonging to the lipase subfamily I.3, was cloned and expressed in Bacillus subtilis WB800N. Enzymatic properties studies of recombinant LipB found that it exhibited the highest activity towards p-nitrophenyl caprylate at 40 °C and pH 8.0, retaining 73% of its original activity after incubation at 70 °C for 6 h. In addition, Ca²⁺, Mg²⁺, and Ba²⁺ strongly enhanced the activity of LipB, while Cu²⁺, Zn²⁺, Mn²⁺, and CTAB showed an inhibiting effect. The LipB also displayed noticeable tolerance to organic solvents, especially acetonitrile, isopropanol, acetone, and DMSO. Moreover, LipB was applied to the enrichment of polyunsaturated fatty acids from fish oil. After hydrolyzing for 24 h, it could increase the contents of polyunsaturated fatty acids from 43.16% to 72.18%, consisting of 5.75% eicosapentaenoic acid, 19.57% docosapentaenoic acid, and 46.86% docosahexaenoic acid, respectively. The properties of LipB render it great potential in industrial applications, especially in health food production.

The Application of Two-Phase Catalytic System in Enantioselective Separation of Racemic (R,S)-1-Phenylethanol

Kinetic resolution is one of the methods which allows obtaining enantiomerically pure compounds. In the study presented herein, enantioselective biotransformations of (R,S)-1-phenylethanol were performed with the use of various catalytic systems containing ionic liquids and n-heptane or toluene as a reaction medium, vinyl acetate or isopropenyl acetate as an acetylating agent, and lipases from Burkholderia cepacia or Candida rugosa. The conducted studies proved that the use of Burkholderia cepacia lipase, vinyl acetate, and n-heptane with [EMIM][BF4] allows obtaining enantiomerically pure 1-phenylethyl acetate, with the enantiomeric excess of products eep = 98.9%, conversion c = 40.1%, and high value of enantioselectivity E > 200. Additionally, the use of ionic liquids allowed us to reuse enzyme in 5 reaction cycles, ensuring the high operational stability of the protein.

Production of biodiesel by Burkholderia cepacia lipase as a function of process parameters

Despite the already established route of chemically catalyzed transesterification reaction in biodiesel production, due to some of its shortcomings, biocatalysts such as lipases present a vital alternative. Namely, it was noticed that one of the key shortcomings for the optimization of the enzyme catalyzed biodiesel synthesis process is the information on the lipase activity in the reaction mixture. In addition to making optimization difficult, it also makes it impossible to compare the results of the independent research. This article shows how lipase intended for use in biodiesel synthesis can be easily and accurately characterized and what is the enzyme concentration that enables achievement of the desired level of fatty acid methyl esters (FAME) in the final product mixture. Therefore, this study investigated the effect of two different activity loads of Burkholderia cepacia lipase on the biodiesel synthesis varying the pH and temperature optimal for lipase activity. The optimal lipase pH and temperature were determined by two different enzyme assays: spectrophotometric and titrimetric. The B. cepacia lipase pH optimum differentiated between assays, while the lipase optimally hydrolyzed substrates at 50°C. The analysis of FAME during 24 hr of biodiesel synthesis, at two different enzyme concentrations, pH 7, 8, and 10, and using two different buffers, revealed that the transesterification reaction at optimal pH, 1 hr reaction time and lipase activity load of 250 U per gram of reaction mixture was sufficient to produce more than 99% FAME.

Tailoring Particle-Enzyme Nanoconjugates for Biocatalysis at the Organic-Organic Interface

Nonaqueous Pickering emulsions (PEs) are a powerful platform for catalysis design, offering both a large interface contact and a preferable environment for water-sensitive synthesis. However, up to now, little progress has been made to incorporate insoluble enzymes into the nonaqueous system for biotransformation. Herein, we present biocatalytically active nonaqueous PEs, stabilized by particle-enzyme nanoconjugates, for the fast transesterification and esterification, and eventually for biodiesel synthesis. Our nanoconjugates are the hybrid biocatalysts tailor-made by loading hydrophilic Candida antarctica lipase B onto hydrophobic silica nanoparticles, resulting in not only catalytically active but highly amphiphilic particles for stabilization of a methanol-decane emulsion. The enzyme activity in these PEs is significantly enhanced, ca. 375-fold higher than in the nonaqueous biphasic control. Moreover, the PEs can be multiply reused without significant loss of enzyme performance. With this proof-of-concept, this system can be expanded for many advanced syntheses using different enzymes in the future.

Amano Lipase PS from Burkholderia cepacia- Evaluation of the Effect of Substrates and Reaction Media on the Catalytic Activity

:

Lipases in the native or immobilized form have commonly been used as catalysts in the chemical and pharmaceutical industry. One of the widely available enzyme catalysts on the market is lipase from Burkholderia cepacia (BCLs), previously called Pseudomonas cepacia (PCLs). This enzyme is applied, among others, in the stereoselective acylation of molecules to achieve chiral pure enantiomers of drugs or their building blocks. In this study, Amano lipase PS (APS-BCL), which is a commercial lipase from Burkholderia cepacia (BC) was tested. The lipolytic activity of APS-BCL by hydrolysis of vegetable oils and enantioselective activity of APS-BCL by the kinetic resolution of (R,S)-1-phenylethanol with using isopropenyl acetate as an acyl donor were evaluated. An effect of reaction media with different logP values (t-butyl methyl ether, dichloromethane, diisopropyl ether, toluene, cyclohexane, n-hexane, isooctane and n-heptane) on the enantioselective activity of lipase was also studied. The high value of the enantiomeric ratio (E =308.5) with the utilization of isopropenyl acetate was achieved. Whereas, the best reaction medium turned out to be diisopropyl ether, C =47.9%, eep =98%, ees =90%, after 24 h of incubation. Moreover, the influence of ω6/ω9 polyunsaturated fatty acids (PUFAs) ratio in commercial (peanut, camelina, rape, pumpkin seed, walnut, sesame, avocado, rice, corn, black cumin, hemp, safflower, grape seed) oils was investigated for the lipase activity. For the first time, the cut-off limit of ω6/ω9 ratio was proposed. The ratio equal to or higher than 2.3 allows achieving higher lipolytic activity.

Solvent stable microbial lipases: current understanding and biotechnological applications

OBJECTIVE

This review examines on our current understanding of microbial lipase solvent tolerance, with a specific focus on the molecular strategies employed to improve lipase stability in a non-aqueous environment.

RESULTS

It provides an overview of known solvent tolerant lipases and of approaches to improving solvent stability such as; enhancing stabilising interactions, modification of residue flexibility and surface charge alteration. It shows that judicious selection of lipase source supplemented by appropriate enzyme stabilisation, can lead to a wide application spectrum for lipases.

CONCLUSION

Organic solvent stable lipases are, and will continue to be, versatile and adaptable biocatalytic workhorses commonly employed for industrial applications in the food, pharmaceutical and green manufacturing industries.

A Novel Triculture System (CC3) for Simultaneous Enzyme Production and Hydrolysis of Common Grasses through Submerged Fermentation

The perennial grasses are considered as a rich source of lignocellulosic biomass, making it a second generation alternative energy source and can diminish the use of fossil fuels. In this work, four perennial grasses Saccharum arundinaceum, Panicum antidotale, Thysanolaena latifolia, and Neyraudia reynaudiana were selected to verify their potential as a substrate to produce hydrolytic enzymes and to evaluate them as second generation energy biomass. Here, cellulase and hemi-cellulase producing three endophytic bacteria (Burkholderia cepacia BPS-GB3, Alcaligenes faecalis BPS-GB5 and Enterobacter hormaechei BPS-GB8) recovered from N. reynaudiana and S. arundinaceum were selected to develop a triculture (CC3) consortium. During 12 days of submerged cultivation, a 55–70% loss in dry weight was observed and the maximum activity of β-glucosidase (5.36–12.34 IU) and Xylanase (4.33 to 10.91 IU) were observed on 2nd and 6th day respectively, whereas FPase (0.26 to 0.53 IU) and CMCase (2.31 to 4.65 IU) showed maximum activity on 4th day. Around 15–30% more enzyme activity was produced in CC3 as compared to monoculture (CC1) and coculture (CC2) treatments, suggested synergetic interaction among the selected three bacterial strains. Further, the biomass was assessed using Fourier-transform infrared spectroscopy (FTIR) and Scanning electron microscopy (SEM). The FTIR analysis provides important insights into the reduction of cellulose and hemicellulose moieties in CC3 treated biomass and SEM studies shed light into the disruption of surface structure leading to access of cellulose or hemicelluloses microtubules. The hydrolytic potential of the CC3 system was further enhanced due to reduction in lignin as evidenced by 1–4% lignin reduction in biomass compositional analysis. Additionally, laccase gene was detected from A. faecalis and E. hormaechei which further shows the laccase production potential of the isolates. To our knowledge, first time we develop an effective endophytic endogenous bacterial triculture system having potential for the production of extracellular enzymes utilizing S. arundinaceum and N. reynaudiana as lignocellulosic feedstock.