Enhanced CO2 biofixation and protein production by microalgae biofilm attached on modified surface of nickel foam

Anti-biofouling efficacy of three home and personal care product preservatives: Pseudomonas aeruginosa biofilm inhibition and prevention

Due to increasing water scarcity, it is essential to determine cost-effective and efficient methods of producing potable water, especially ones that utilize non-traditional sources. Although reverse osmosis (RO) shows promise as a key-player in mitigating water scarcity, it is limited by biofouling. It is therefore integral to identify effective antifoulants that also do not damage the membrane, cause resistance, or negatively impact human health and the environment. Potential antifoulants include preservatives used in home and personal care products. It is hypothesized that safer preservatives can be applied to RO systems to remove or prevent biofouling. Three preservatives including methylisothiazolinone (MIT), phenoxyethanol (PE), and sodium benzoate (SB) were tested via antimicrobial susceptibility tests against P. aeruginosa biofilms grown in 96-well plates to investigate both biofilm prevention and biofilm removal. Data were collected in the form of minimum biofilm inhibitory concentration (MBIC) and minimum biofilm eradication concentration (MBEC), respectively. MIT was the most effective of the three preservatives but also poses the highest hazard to human health and the environment. Due to efficacy and safety concerns, MIT, PE, and SB are not the final solution; however, a process was demonstrated for determining the efficacy of novel, safer antifoulants. Ultimately, further investigations into safer antifoulants, paired with a greater understanding of biofilm removal and prevention doses will help make RO a better solution for water scarcity.

A review on phytoremediation of mercury contaminated soils

Mercury (Hg) and its compounds are one of the most dangerous environmental pollutants and Hg pollution exists in soils in different degrees over the world. Phytoremediation of Hg-contaminated soils has attracted increasing attention for the advantages of low investment, in-situ remediation, potential economic benefits and so on. Searching for the hyperaccumulator of Hg and its application in practice become a research hotspot. In this context, we review the current literatures that introduce various experimental plant species for accumulating Hg and aided techniques improving the phytoremediation of Hg-contaminated soils. Experimental plant species for accumulating Hg and accumulation or translocation factor of Hg are listed in detail. The translocation factor (TF) is greater than 1.0 for some plant species, however, the bioaccumulation factor (BAF) is greater than 1.0 for Axonopus compressus only. Plant species, soil properties, weather condition, and the bioavailability and heterogeneity of Hg in soils are the main factors affecting the phytoremediation of Hg-contaminated soils. Chemical accelerator kinds and promoting effect of chemical accelerators for accumulating and transferring Hg by various plant species are also discussed. Potassium iodide, compost, ammonium sulphate, ammonium thiosulfate, sodium sulfite, sodium thiosulfate, hydrochloric acid and sulfur fertilizer may be selected to promote the absorption of Hg by plants. The review introduces transgenic gene kinds and promoting effect of transgenic plants for accumulating and transferring Hg in detail. Some transgenic plants can accumulate more Hg than non-transgenic plants. The composition of rhizosphere microorganisms of remediation plants and the effect of rhizosphere microorganisms on the phytoremediation of Hg-contaminated soils are also introduced. Some rhizosphere microorganisms can increase the mobility of Hg in soils and are beneficial for the phytoremediation.

Enhancing CO2 Hydrogenation to Methane by Ni-Based Catalyst with V Species Using 3D-mesoporous KIT-6 as Support

Using renewable H2 for CO2 hydrogenation to methane not only achieves CO2 utilization, but also mitigates the greenhouse effect. In this work, several Ni-based catalysts with V species using 3D-mesoporous KIT-6 (Korea Advanced Institute of Science and Technology, KIT) as support were prepared at different contents of NiO and V2O5. Small Ni nanoparticles with high dispersibility on 20Ni-0.5V/KIT-6 were identified by X-ray diffraction (XRD), TEM and hydrogen temperature-programmed desorption (H2-TPD) analysis, which promoted the production of more Ni active sites for enhancing catalytic activity for CO2 methanation. Moreover, TEM and hydrogen temperature-programmed reduction (H2-TPR) characterizations confirmed that a proper amount of Ni and V species was favorable to preserve the 3D-mesoporous structure and strengthen the interaction between active Ni and KIT-6. The synergistic effect between Ni and V could strengthen surface basicity to elevate the ability of CO2 activity on the 20Ni-0.5V/KIT-6. In addition, a strong interaction with the 3D-mesoporous structure allowed active Ni to be firmly anchored onto the catalyst surface, which was accountable for improving catalytic activity and stability. These results revealed that 20Ni-0.5V/KIT-6 was a catalyst with superior catalytic activity and stability, which was considered as a promising candidate for CO2 hydrogenation to methane.

A review on control factors of pyrolysis technology for plants containing heavy metals

The treatment of plants with heavy metals, whether they grow naturally in heavy metal contaminated soil or are used for remediation of heavy metal contaminated soil has attracted increasing attention. Pyrolysis is often used for the disposal of plants with heavy metals because it stabilizes heavy metals effectively and produces biochar. The resulting products of pyrolysis are in the form of solid components (char and ash), liquid components (bio-oil and tar), together with gas components (condensable and non-condensable vapor gas). The metal amount in the char or liquid and gaseous phases can be maximized or minimized via treating a plant feedstock containing heavy metals under different conditions. In addition, the potential risk of biochar produced from plants after pyrolysis becomes a research hotspot in the field of pyrolysis technology of plants containing heavy metals. Herein, we review current literatures that emphasize the influencing factors on the metal content in the biochar, liquid and gaseous phases, as well as the potential risk of biochar.

Effect of the pyrolysis duration and the addition of zeolite powder on the leaching toxicity of copper and cadmium in biochar produced from four different aquatic plants

The study aimed to determine the biochar yield of four aquatic plants, the leaching toxicity of copper (Cu) and cadmium (Cd) in the biochar, and the stabilization characteristics of the biochar produced under different pyrolysis conditions (at 350 °C for 1, 2, and 3 h and absence/presence of zeolite powder). The results showed that different plant species required a different pyrolysis duration and the presence or absence of zeolite powder. The stabilization of Cu and Cd was significantly affected by the pyrolysis duration and the external materials for different plant species and different types of admixtures. Pyrolysis temperatures over 350 °C for 1 h without zeolite powder generated stable Cu and Cd in goldfish algae (Ceratophyllum demersum L.), foxtail algae (Myriophyllum verticillatum L.), and penny grass (Hydrocotyle vulgaris). Pyrolysis temperatures over 350 °C for 1 h with zeolite powder made Cu and Cd stable in water celery (Oenanthe javanica (Bl.) DC). The addition of zeolite powder during pyrolysis was possible due to the weight reduction efficiency in plants with Cu and Cd. Furthermore, the surface of the biochar with the zeolite powder showed honeycombs and a spongy porous structure. The duration of the pyrolysis had little effect on the honeycomb pore structure.

Effect of mixed solutions of heavy metal eluents on soil fertility and microorganisms

This study analyzed the effect of heavy metal eluents (0.3 mol/L C₆H₈O₇, 5 × 10^-4 mol/L EDTA, and 0.01 mol/L Na₂S₂O₃) on the content of organic matter, hydrolytic nitrogen, available phosphorus and potassium, and species composition of bacteria and fungi in vegetable soils. The obtained results documented that the treatment of the soil, consisting of shaking the sample with a mixture of eluents, significantly increased the content of organic matter, hydrolytic nitrogen, and available phosphorus and potassium. The mixed solutions of eluents increase the maximum available P in the soil by 279.3%, and hydrolytic N by 30.7%. The eluents affected, to a certain extent, the dominant species of microorganisms in the soil, but did not increase species richness and evenness in all soil samples.