Considering a membrane bioreactor for the treatment of vegetable oil refinery wastewaters at industrially relevant organic loading rates

Investigation of a membrane bioreactor's performances in treating sunflower oil refinery wastewater containing high oleic acid at different SRTs

This study investigated the MBR performance, sludge morphology, and membrane fouling potential in treating sunflower oil refinery wastewater containing high oleic acid at three different SRTs of 10 days, 40 days, and infinite. The analysis of mixed liquor morphology including sludge volume index, PSD, EPS, and SMP showed that the sludge flocs compressibility and bioflocculation considerably improved at 40-days SRT. Additionally, at this SRT, the mixed liquor O&G, COD, and SMP accumulation were low, and the microbial activity and COD removal were enhanced. The gas chromatography/mass spectrometry analysis results confirmed the formation of three different new compounds related to non-readily biodegradable recalcitrant oily compounds and SMP at all SRTs. The analysis of mixed liquor EPS, PSD, SMP, and effluent COD at three different SRTs suggests that under the industrial conditions of MBR operation treating SORW with high oleic acid, the optimal operating conditions are predicted to be at 40-days SRT.

Evaluating the Optimal Oil Concentrations in the Startup Performance of a Membrane Bioreactor Treating Oily Noodle-soup Wastewater

The discharge of high-strength oily wastewater adversely affects the environment; therefore, the treatment of wastewater containing fats, oils, and grease from the food industry is of importance. In this study, we used a membrane bioreactor (MBR) to treat Ramen noodle-soup wastewater, and we evaluated the optimal oil concentration in the wastewater for the startup of the MBR treatment in winter and summer. The MBR system had a sufficient startup in both seasons when fed with a 20-fold dilution of the original oily wastewater, containing approximately 950 to 1,200 mg/L oil and approximately 3,000 to 4,400 mg/L biological oxygen demand (BOD; BOD-SS load of 0.1 to 0.2 kg/kg/d). The reactor performance in winter were relatively stable during the operation. While, activated sludge microbes in summer were not highly active with a 40-fold dilution of wastewater, because of the decreased mixed liquor suspended solid concentration during the operation period. Population shifts in the sludge microbiome with increasing oil concentrations were analyzed using high-throughput sequencing, and the relative abundance of operational taxonomic units belonging to the phylum Bacteroidetes were highest in both winter and summer when fed with 20-fold dilution of the wastewater. In particular, the family Chitinophagaceae was dominant, with relative abundances of 13.5% in winter and 5.1% in summer, suggesting that this family may play important roles in the startup of a MBR treating the wastewater.

Development of advanced oil/water separation technologies to enhance the effectiveness of mechanical oil recovery operations at sea: Potential and challenges

Mechanical oil recovery (i.e., booming and skimming) is the most common tool for oil spill response. The recovered fluid generated from skimming processes may contain a considerable proportion of water (10 % ~ 70 %). As a result of regulatory prohibition on the discharge of contaminated waters at sea, vessels and/or storage barges must make frequent trips to shore for oil-water waste disposal. This practice can be time- consuming thus reduces the overall efficiency and capacity of oil recovery. One potential solution is on-site oil-water separation and disposal of water fraction at sea. However, currently available decanting processes may have limited oil/water separation capabilities, especially in the presence of oil-water emulsion, which is inevitable in mechanical oil recovery. The decanted water may not meet the discharge standards and cause severe ecotoxicological impacts. This paper therefore comprehensively reviews the principles and progress in oil/water separation, demulsification, and on-site treatment technologies, investigates their applicability on decanting at sea, and discusses the ecotoxicity of decanted water in the marine environment. The outputs provide the fundamental and practical knowledge on decanting and help enhance response effectiveness and consequently reducing the environmental impacts of oil spills.

Current available treatment technologies for saline wastewater and land-based treatment as an emerging environment-friendly technology: A review

Different industrial activities such as agro-food processing and manufacturing, leather manufacturing, and paper and pulp production generate highly saline wastewater. Direct discharge of saline wastewater has resulted in pollution of waterbodies by very high magnitudes. Consequently, an enormous number of pollutants such as heavy metals, salts, and organic matter are also released into the environment threatening the survival of human and biota. Saline wastewater also has significant effects on survival of plants, agricultural activities, and groundwater systems. Several treatments and disposal technologies are available for saline wastewater, but the selection of the most appropriate treatment and disposal technology still remains a major challenge with respect to the economic or technical constraints. Considering the sustainable management of saline wastewater, the present review is an attempt to compile the existing and emerging technologies for the treatment of saline wastewater. Among all the individual and hybrid technologies, land-based treatment systems are proven to be the most efficient technologies considering the energy demands, economic, and treatment efficiencies. Likewise, new and sustainable technologies are the need of hour integrating both the treatment and management and the resource recovery factors along with the ultimate goal of the protection in terms of human health and environmental aspect. PRACTITIONER POINTS: Physico-chemical treatment technologies for saline wastewater. Combined/Hybrid technologies for the treatment of saline wastewater. Land-based treatments as the environment friendly and sustainable method for saline wastewater treatment and disposal. Role of phytoremediation in land-based treatment.

Diversity of Acyl Homoserine Lactone Molecules in Anaerobic Membrane Bioreactors Treating Sewage at Psychrophilic Temperatures

This study explores the types of acyl homoserine lactone (AHL) and their concentrations in different compartments of different conventional anaerobic bioreactors: (i) an upflow anaerobic membrane bioreactor (UAnMBR, biofilm/mixed liquor (sludge)); (ii) an anaerobic membrane bioreactor (AnMBR, biofilm/mixed liquor (sludge)); and (iii) an upflow sludge blanket (UASB, sludge only), all operating at 15 °C. Ten types of the AHL, namely C4-HSL, 3-oxo-C4-HSL, C6-HSL, 3-oxo-C6-HSL, C8-HSL, 3-oxo-C8-HSL, C10-HSL, 3-oxo-C10-HSL, C12-HSL, and 3-oxo-C12-HSL, which were investigated in this study, were found in UAnMBR and UASB, whilst only six of them (C4-HSL, 3-oxo-C4-HSL, C8-HSL, C10-HSL, 3-oxo-C10-HSL, and C12-HSL) were found in AnMBR. Concentrations of total AHL were generally higher in the biofilm than the sludge for both membrane bioreactors trialed. C10-HSL was the predominant AHL found in all reactors (biofilm and sludge) followed by C4-HSL and C8-HSL. Overall, the UAnMBR biofilm and sludge had 10-fold higher concentrations of AHL compared to the AnMBR. C10-HSL was only correlated with bacteria (p < 0.05), whilst other types of AHL were correlated with both bacteria and archaea. This study improves our understanding of AHL-mediated Quorum Sensing (QS) in the biofilms/sludge of UAnMBR and AnMBR, and provides new information that could contribute to the development of quorum quenching anti-fouling strategies in such systems.