Kinematic study of the relation between the instantaneous center of rotation and degenerative changes in the cervical intervertebral disc

Changes in the centre of rotation and the anterior bone loss of the vertebral body in Mobi-C artificial disc replacement segments after cervical hybrid surgery: a retrospective study

OBJECTIVE

To examine the short-term efficacy and imaging results of using the Mobi-C in cervical hybrid surgery on 2-level cervical spondylolisthesis. To observe post-operative changes in the flexion-extension centre of rotation (FE-COR) and anterior bone loss (ABL) of the anterior cervical disc replacement (ACDR) segment.

METHODS

Forty-two patients (20 males and 22 females, aged 42‒67 years) who underwent cervical hybrid surgery were retrospectively analysed. Their ACDR segment used Mobi-C, and the fusion segment used ROI-C, with a follow-up of 25‒42 months (31.1 ± 4.8 months). The modified Japanese Orthopaedic Association (mJOA) score, Neck Disability Index (NDI), and visual analogue scale (VAS) were used to assess clinical outcomes. Pre-operative, 6-month post-operative, and final follow-up radiographs were collected to compare total cervical spine curvature (C2-C7), curvature of the operated segments, range of motion (ROM) in the total cervical spine, operated segmental ROM, ACDR segmental ROM, and operated adjacent segmental ROM. The height of the superior articular process (HSAP), the orientation of zygapophyseal joint spaces (OZJS), and the length of the superior articular surface (LSAS) were measured. The FE-COR of the ACDR segment was measured using the mid-plumb line method. The translation distance of the Mobi-C was measured. The degree of disc degeneration in the adjacent segment, bony fusion of the ACDF segment, and ABL of the upper and lower vertebra of the ACDR segment were observed.

RESULTS

In our group, all patients have shown improvements in their postoperative mJOA, NDI, and VAS scores. Overall cervical ROM and surgical segmental ROM decreased (P < 0.05). However, there was no significant decrease in ACDR segmental ROM and upper or lower adjacent segmental ROM compared with pre-operatively (P > 0.05). For FE-COR-X, only the last follow-up compared with pre-surgery showed statistical significance (46.74 ± 7.71% vs. 50.74 ± 6.92%, P < 0.05). For FE-COR-Y, the change was statistically significant at both 6 months post-operation and the final follow-up compared to pre-operation (45.37% ± 21.11% vs. 33.82% ± 10.87%, 45. 37% ± 21.11% vs. 27.48% ± 13.58%, P < 0.05). No significant difference in the Mobi-C translation distance was observed (P > 0.05). Moreover, the difference in HSAP was not statistically significant at each node (P > 0.05). The OZJS and LSAS were significantly different at the final follow-up compared to the pre-operative period (P < 0.05). All the ACDF segments were observed in a stable condition at the final follow-up. Furthermore, 9 of the adjacent segments showed imaging ASD (9/82, 10.98%), and all were present at the last follow-up, of which 6 were mild, and 3 were moderate. Twenty of the 42 Mobi-C segments had no significant ABL (grade 0) 6 months post-operatively (47.62%). Sixteen cases (38.10%) showed mild ABL (grade 1), and 6 cases (14.28%) showed moderate ABL (grade 2). No severe ABL occurred.

CONCLUSION

The cervical hybrid surgery using Mobi-C artificial cervical discs can achieve satisfactory results. The Mobi-C segmental FE-COR-X shows a slow forward shift trend, and FE-COR-Y drops noticeably within 6 months post-surgery before stabilizing. It's common to see mild to moderate ABL after cervical hybrid surgery using Mobi-C, and significant progression is unlikely in the short term. Furthermore, changes in the FE-COR after hybrid surgery in the Mobi-C segment might not affect clinical outcomes.

Prospective Multicenter Trial of Cervical Arthroplasty with the ROTAIO® Cervical Disc Prosthesis

STUDY DESIGN

Clinical observational study.

OBJECTIVE

The ROTAIO® cervical disc prosthesis is a novel unconstrained implant with a variable center of rotation aiming at physiological motion. The objective of this multicenter prospective trial was to evaluate clinical outcome and complications within 2 years.

MATERIAL AND METHODS

120 patients (72 females and 48 males with median age of 43.0 years [23-60 yrs] underwent ACDA (ROTAIO®, SIGNUS Medical, Alzenau, Germany) and were prospectively followed for 24 months. Preoperative complaints were mainly associated with radiculopathy (n = 104) or myelopathy (n=16). There were 108 monosegmental and 12 bisegmental procedures including 6 hybrid constructs. Clinical outcome was evaluated at 3, 12 and 24 months in 100%, 96% and 77% of the cohort by VAS, NDI, WL-26, Patient`s Satisfaction Index (PSI), SF-36, Nurick Score, mJOA, Composite Success Rate, complications, patient`s overall satisfaction and analgesics use.

RESULTS

Highly significant clinical improvements were observed according to NDI and VAS (P < .0001 (arm); P < .001 (neck); P = .002 (head)) at all time points. Analgetic use could be reduced in 87.1 to 95.2%. Doctor`s visits have been reduced in 93.8% after 24 months. Patient`s overall satisfaction was high with 78.4 to 83.5% of patients. The composite success rate was 77.5% after 12 months and 76.9% after 24 months. There were no major complications in this series. Slight subsidence of the prosthesis was observed in 2 patients and 3 patients demonstrated fusion after 24 months. 2 patients developed symptomatic foraminal stenosis, so that implant removal and fusion was performed resulting in a revision rate of 1.7% in 2 years.

CONCLUSION

The ROTAIO® cervical disc prosthesis is a safe and efficient treatment option for symptomatic degenerative disc disease demonstrating highly significant clinical improvement and high patient`s overall satisfaction with very low revision rates at 2 years.

The discrepant clinical outcome predictions according to the differentiated centre of rotation shift after multilevel cervical total disc replacement

PURPOSE

Cervical total disc replacement (TDR) aims to maintain normal cervical kinematics after surgery. This study investigates the relation between shifted location of centre of rotation (COR) and subsequent surgical outcomes after multilevel cervical TDR (MCTDR) and identifies radiological parameter that corresponded to this change of COR after MCTDR.

METHODS

The study included a consecutive 24 patients treated with MCTDR following the diagnosis of multilevel cervical disc herniation or stenosis. Numeric Rating Scale (NRS), range of motion (ROM) at both C2-7 segment and TDR implanted levels, and location of COR at TDR level were evaluated at pre- and post-MCTDR. These parameters were compared between patients who experienced successful and unsuccessful pain relief.

RESULTS

The inherent CORs relatively at ventro-cranial coordinates have demonstrated significant migrations to dorso-caudal location, more prominent shifts for the successful group, after MCTDR switch. The unsuccessful group showed markedly reduced C2-7 ROM and reduced angular improvement at C2-7 as well as MCTDR level in comparison with the successful group. Postoperative C2-7 ROM was related to postoperative COR along the X axis.

CONCLUSION

The determinant for clinical success after MCTDR, other than mere preservation of the ROM both at C2-7 and TDR levels, was restoration of COR from ventro-cranial location close to normal coordinates by posterior and inferior shifts. The position of COR along the X axis after MCTDR was important factor to determine maintenance of C2-7 ROM.

UBC Neck C4-C5: An Anatomically and Biomechanically Accurate Surrogate C4-C5 Functional Spinal Unit

Millions of people worldwide suffer from spinal cord injuries (SCIs) and traumatic brain injuries (TBIs) annually. Safety devices meant to protect against SCIs and TBIs, such as helmets, airbags, seat belts, and compliant floors are often evaluated with the use of anthropometric test devices (ATD s); however, there are currently no neck surrogates appropriate for the multiplane loading that often occurs in real-world scenarios leading to injury. As such, our objective in this study was to design and create an anatomically correct functional spinal unit (FSU) that produces a repeatable and biofidelic response to lateral bending, axial rotation, and quasistatic flexion-extension motion. This is a critical step in developing a biofidelic omnidirectional surrogate that can be used in future evaluations of safety devices in transportation, occupational, and sports settings. To create a biofidelic C4-C5 FSU, anatomically accurate C4 and C5 vertebrae were designed and manufactured using a 3D printer using geometry derived from the CT scans of a healthy 31-year-old male. Potential intervertebral disc and ligament surrogate materials were tested in compression and tension, respectively, to select representative materials for the surrogate intervertebral disc and cervical ligaments. The C4-C5 FSU was assembled and tested repeatedly in quasistatic flexion-extension, axial rotation, and lateral bending. Kinematic results were captured and compared to previously published cadaver data. The surrogate disc showed excellent Biofidelity (ISO/TR 9790) in compression, and the surrogate ligaments were within 25 N/mm of linear cadaveric stiffness ranges. The assembled FSU named UBC Neck C4-C5 showed good biofidelity under quasistatic axial rotation, lateral bending, flexion-extension, and coupled motion (ISO/TR 9790). However, the instantaneous centre of rotation was not similar to ex vivo or in vivo published studies. The UBC Neck C4-C5 FSU resulted in good biofidelity ratings and will inform future construction of a full surrogate neck to be used in the testing of head and neck safety equipment.

Preliminary Results of Instantaneous Centre of Rotation Change after Thoracic Instrumentation in Adolescent Idiopathic Scoliosis Patients

Introduction

The instantaneous centre of rotation (ICR) is the centre of motion with zero velocity where a rigid body moves in a particular plane. ICR, as a dynamic measurement, gives more accurate results in terms of quality and quantity of the vertebral motions compared to range of motion (ROM). We aimed to determine the effect of thoracic instrumentation on cervical movement of adolescent idiopathic scoliosis (AIS) patients who had undergone thoracic level instrumentation by measuring pre-operative and post-operative ICR change in a pilot study.

Materials and methods

A total of 25 AIS patients were included in this study. C4-C5 and C6-C7 segmental ICR were determined by pre-operative and post-operative cervical flexion-extension radiographs. In addition, cervical sagittal parameters and global sagittal parameters were investigated.

Results

There was no statistically significant change in ICR location post-operatively in both x and y coordinates at C4-C5 segment (p: 0.326 and p: 0.946, respectively) and C6-C7 segment (p: 0.209, p: 0.086, respectively). There was a positive correlation between LCL and C4-C5 ICR y coordinate (r: 0.481), but not with C6-C7 ICR y coordinate (r: -0.2, p: 0.398). T5-T12 kyphosis decreased (p: 0.002) and T1 pelvic angle (0.003), SVA (0.02) and sacral slope (0.049) increased significantly post-operatively. T1S was correlated with LCL (r: 0.595, p: 0.002), T5-T12 kyphosis (r: 0.423, p: 0.035), SVA (r: 0.658, p<0.001) and C2-C7 SVA (r: 0.416, p: 0.039).

Conclusion

The ICR for cervical region was not changed post-operatively in AIS patients with thoracic instrumentation. There was no relationship found between the development of post-operative cervical kyphosis or lordosis and ICR, which represents the quality and quantity of intervertebral motion. The T1 vertebra plays a key role for cervical, thoracic, and global parameters interaction.

Mid-long-term follow-up of operated level kinematics after single-level artificial cervical disc replacement with Bryan disc

OBJECTIVE

Evaluation of the mid-long-term kinematics of single-level Bryan artificial cervical disc replacement (ACDR) in vivo by analyzing the center of rotation (COR) at the operated level.

METHODS

A retrospective analysis was conducted using data collected from 38 patients who underwent single-level Bryan ACDR from January 2010 to March 2013. Radiological parameters including range of motion (ROM), lordosis angle, translation, and COR were obtained. Clinical outcomes were assessed based on Odom Criteria, modified Japanese Orthopedic Association (mJOA), Neck Disability Index (NDI), and Visual Analogue Scale (VAS) scores. Correlations between COR and other follow-up data were discussed at the last follow-up.

RESULTS

Compared with preoperative values, the last follow-up data showed that 86.84% of cases achieved good-or-excellent outcomes based on Odom criteria; Significant improvements were observed across all scales assessed for clinical outcomes (P < 0.05); Lordosis angle was significantly increased in both the overall cervical spine and the operated level (P < 0.05); ROM of the overall cervical spine, operated level, and adjacent levels was preserved (P > 0.05); There was no significant change in COR at the operated level (P > 0.05). At the last follow-up and at the operated level, COR (Y) showed negative correlations with ROM and translation (P < 0.05), but no follow-up data correlated with COR (X) were found (P > 0.05).

CONCLUSIONS

Satisfactory clinical and radiological outcomes were achieved 7 years or more after single-level Bryan ACDR. At the operated level, preoperative COR was maintained, probably due to replicating the physiological interrelations of COR (Y), translation, and ROM.

Kinematics of the Cervical Spine Under Healthy and Degenerative Conditions: A Systematic Review

Knowledge of spinal kinematics is essential for the diagnosis and management of spinal diseases. Distinguishing between physiological and pathological motion patterns can help diagnose these diseases, plan surgical interventions and improve relevant tools and software. During the last decades, numerous studies based on diverse methodologies attempted to elucidate spinal mobility in different planes of motion. The authors aimed to summarize and compare the evidence about cervical spine kinematics under healthy and degenerative conditions. This includes an illustrated description of the spectrum of physiological cervical spine kinematics, followed by a comparable presentation of kinematics of the degenerative cervical spine. Data was obtained through a systematic MEDLINE search including studies on angular/translational segmental motion contribution, range of motion, coupling and center of rotation. As far as the degenerative conditions are concerned, kinematic data regarding disc degeneration and spondylolisthesis were available. Although the majority of the studies identified repeating motion patterns for most motion planes, discrepancies associated with limited sample sizes and different imaging techniques and/or spine configurations, were noted. Among healthy/asymptomatic individuals, flexion extension (FE) and lateral bending (LB) are mainly facilitated by the subaxial cervical spine. C4-C5 and C5-C6 were the major FE contributors in the reported studies, exceeding the motion contribution of sub-adjacent segments. Axial rotation (AR) greatly depends on C1-C2. FE range of motion (ROM) is distributed between the atlantoaxial and subaxial segments, while AR ROM stems mainly from the former and LB ROM from the latter. In coupled motion rotation is quantitatively predominant over translation. Motion migrates caudally from C1-C2 and the center of rotation (COR) translocates anteriorly and superiorly for each successive subaxial segment. In degenerative settings, concurrent or subsequent lesions render the association between diseases and mobility alterations challenging. The affected segments seem to maintain translational and angular motion in early and moderate degeneration. However, the progression of degeneration restrains mobility, which seems to be maintained or compensated by adjacent non-affected segments. While the kinematics of the healthy cervical spine have been addressed by multiple studies, the entire nosological and kinematic spectrum of cervical spine degeneration is partially addressed. Large-scale in vivo studies can complement the existing evidence, cover the gaps and pave the way to technological and clinical breakthroughs.

Cervical disc degeneration: important considerations for the manual therapist

Cervical disc degeneration (CDD) is a progressive, age-related occurrence that is frequently associated with neck pain and radiculopathy. Consistent with the majority of published clinical practice guidelines (CPG) for neck pain, the 2017 American Physical Therapy Association Neck Pain CPG recommends cervical manipulation as an intervention to address acute, subacute, and chronic symptoms in the 'Neck Pain With Mobility Deficits' category as well for individuals with 'Chronic Neck Pain With Radiating Pain'. While CPGs are evidence-informed statements intended to help optimize care while considering the relative risks and benefits, these guidelines generally do not discuss the mechanical consequences of underlying cervical pathology nor do they recommend specific manipulation techniques, with selection left to the practitioner's discretion. From a biomechanical perspective, disc degeneration represents the loss of structural integrity/failure of the intervertebral disc. The sequelae of CDD include posterior neck pain, segmental hypermobility/instability, radicular symptoms, myelopathic disturbance, and potential vascular compromise. In this narrative review, we consider the mechanical, neurological, and vascular consequences of CDD, including information on the anatomy of the cervical disc and the mechanics of discogenic instability, the anatomic and mechanical basis of radiculitis, radiculopathy, changes to the intervertebral foramen, the importance of Modic changes, and the effect of spondylotic hypertrophy on the central spinal canal, spinal cord, and vertebral artery. The pathoanatomical and biomechanical consequences of CDD are discussed, along with suggestions which may enhance patient safety.

The effect of cervical intervertebral disc degeneration on the motion path of instantaneous center of rotation at degenerated and adjacent segments: A finite element analysis

BACKGROUND

The motion path of instantaneous center of rotation (ICR) is a crucial kinematic parameter to dynamically characterize cervical spine intervertebral patterns of motion; however, few studies have evaluated the effect of cervical disc degeneration (CDD) on ICR motion path. The purpose of this study was to investigate the effect of CDD on the ICR motion path of degenerated and adjacent segments.

METHOD

A validated nonlinear three-dimensional finite element (FE) model of a healthy adult cervical spine was used. Progressive degeneration was simulated with six FE models by modifying intervertebral disc height and material properties, anterior osteophyte size, and degree of endplate sclerosis at the C5-C6 level. All models were subjected to a pure moment of 1 Nm and a compressive follower load of 73.6 N to simulate physical motion. ICR motion paths were compared among different models.

RESULTS

The normal FE model results were consistent with those of previous studies. In degenerative models, average ICR motion paths shifted significantly anterior at the degenerated segment (β = 0.27 mm; 95% CI: 0.22, 0.32) and posterior at the proximal adjacent segment (β = -0.09 mm; 95% CI: -0.15, -0.02) than those of the normal model.

CONCLUSION

CDD significantly affected ICR motion paths at the degenerated and proximal adjacent segments. The changes at adjacent segments may be a result of compensatory mechanisms to maintain the balance of the cervical spine. Surgical treatment planning should take into account the restoration of ICR motion path to normal. These findings could provide a basis for prosthesis design and clinical practice.

Does oblique lumbar interbody fusion promote adjacent degeneration in degenerative disc disease: A finite element analysis

BACKGROUND

The number of oblique lumbar interbody fusion (OLIF) procedures has continued to rise over recent years. Adjacent segment degeneration (ASD) is a common complication following vertebral body fusion. Although the precise mechanism remains uncertain, ASD has gradually become more common in OLIF. Therefore, the present study analyzed the association between disc degeneration and OLIF to explore whether adjacent degeneration was promoted by OLIF in degenerative disc disease.

METHODS

A three-dimensional nonlinear finite element (FE) model of the L3-S1 lumbar spine was developed and validated. Three lumbar spine degeneration models with different degrees of degeneration (mild, moderate and severe) and a model of OLIF surgery were constructed at the L4-L5 level. When subjected to a follower compressive load (500 N), hybrid moment loading was applied to all models of the lumbar spine and the range of motion (ROM), intradiscal pressure (IDP), facet joint force (FJF), average mises stress in the annulus (AMSA), average tresca stress in the annulus (ATSA) and average endplate stress (AES) were measured.

RESULTS

Compared with the healthy lumbar spine model, the ROM, IDP, FJF, AMSA, ATSA and AES of the segments adjacent to the degenerated segment increased in each posture as the degree of disc degeneration increased. In different directions of motion, the ROM, IDP, FJF, AMSA, ATSA and AES in the OLIF model in the L3-L4 and L5-S1 segments were higher than those of the healthy model and each degenerated model. Compared with the healthy model, the largest relative increase in biomechanical parameters above (ROM, IDP, FJF, AMSA, ATSA or AES) was observed in the L3-L4 segment in the OLIF model, of 77.13%, 32.63%, 237.19%, 45.36%, 110.92% and 80.28%, respectively. In the L5-S1 segment the corresponding values were 68.88%, 36.12%, 147.24%, 46.00%, 45.88% and 51.29%, respectively.

CONCLUSIONS

Both degenerated discs and OLIF surgery modified the pattern of motion and load distribution of adjacent segments (L3-L4 and L5-S1 segments). The increases in the biomechanical parameters of segments adjacent to the surgical segment in the OLIF model were more apparent than those of the degenerated models. In summary, OLIF risked accelerating the degeneration of segments adjacent to those of a surgical segment.

Radiographic cervical spine degenerative findings: a study on a large population from age 18 to 97 years

Purpose

The aims of this study were (1) to determine the prevalence of radiographic cervical disc degeneration in a large population of patients aged from 18 to 97 years; (2) to investigate individually the prevalence and distribution of height loss, osteophyte formation, endplate sclerosis and spondylolisthesis; and (3) to describe the patterns of cervical disc degeneration.

Methods

A retrospective study was performed. Standard lateral cervical spine radiographs in standing, neutral position of 1581 consecutive patients (723 males, 858 females) with an average age of 41.2 ± 18.2 years were evaluated. Cervical disc degeneration was graded from C2/C3 to C6/C7 based on a validated quantitative grading system. The prevalence and distribution of radiographic findings were evaluated and associations with age were investigated.

Results

53.9% of individuals had radiographic disc degeneration and the most affected level was C5/C6. The presence and severity of disc degeneration were found to be significantly associated with age both in male and female subjects. The most frequent and severe occurrences of height loss, osteophyte formation, and endplate sclerosis were at C5/C6, whereas spondylolisthesis was most observed at C4/C5. Age was significantly correlated with radiographic degenerative findings. Contiguous levels degeneration pattern was more likely found than skipped level degeneration. The number of degenerated levels was also associated with age.

Conclusions

The presence and severity of radiographic disc degeneration increased with aging in the cervical spine. Older age was associated with greater number of degenerated disc levels. Furthermore, the correlations between age and the degree of degenerative findings were stronger at C5/C6 and C6/C7 than at other cervical spinal levels.

The Feasibility of Optimal Surgical Result Prediction according to the Center of Rotation Shift after Multilevel Cervical Total Disc Replacement

STUDY DESIGN

Retrospective design/spine clinic and tertiary referral hospital.

PURPOSE

This study investigated the association between shifted location of center of rotation (COR) and subsequent surgical outcomes and identified radiological parameters that corresponded to COR change after multilevel cervical total disc replacement (MCTDR).

OVERVIEW OF LITERATURE

Cervical total disc replacement (TDR) maintains normal cervical kinematics after surgery. However, there is a paucity of literature analyzing the relationship between radiological shifts of COR and subsequent clinical success, especially when it comes to the issue of MCTDR switch.

METHODS

This study included 24 consecutive patients treated with MCTDR following the diagnosis of multilevel cervical disc herniation or stenosis. Numeric rating scale, range of motion (ROM) at both C2-7 segment and TDR implanted levels, and location of COR at TDR level were evaluated pre- and post-MCTDR. These parameters were compared between patients who experienced successful and unsuccessful pain relief.

RESULTS

The inherent CORs relatively at ventrocranial coordinates demonstrated significant migrations to dorsocaudal location, more prominent shifts for the successful group, after MCTDR switch. The unsuccessful group showed markedly reduced C2-7 ROM and reduced angular improvement at C2-7 segment and MCTDR level compared with the successful group. Postoperative C2-7 ROM was related to postoperative COR along the x-axis.

CONCLUSIONS

Aside from ROM preservation at both C2-7 and TDR levels, COR restoration from ventrocranial location close to normal coordinates by posterior and inferior shifts was marked as a clinical success after MCTDR. The COR position along the x-axis after MCTDR was an important factor to determine maintenance of C2-7 ROM.

Influence of Deviated Centers of Rotation on Kinematics and Kinetics of a Lumbar Functional Spinal Unit: An In Vitro Study

Background

Center of rotation (COR) has been used for assessing spinal motion quality. However, the biomechanical influence of COR deviation towards different directions during flexion-extension (FE) remains largely unknown. This study aimed to investigate the alteration in the range of motion (ROM), compressive force, shear force, and neutral zone size (NZ) in a lumbar functional spinal unit (FSU), caused by the deviated COR in different directions during FE.

Material/Methods

Twelve human cadaveric lumbar FSUs (6 for L2–L3, 6 for L4–L5) were tested in a 6-degree-of-freedom servo-hydraulic load frame. These FSUs were firstly applied a 7.5 Nm pure moment to perform FE to obtain their natural COR during FE. Subsequently, they were subjected to FE around 9 established deviated CORs with 6 Nm cyclical loading.

Results

It was found that the ROM and NZ increased significantly when the COR moved from the superior plane to the inferior plane for the L2–L3 unit and when the COR located in the superior plane compared with the inferior plane for the L4–L5 unit. The compressive forces for both FSUs demonstrated significant changes caused by COR shift in the same horizontal plane, while the shear forces demonstrated significant changes caused by COR shift in the same vertical plane.

Conclusions

The ROM, NZ, and shear force of FSU are sensitive to the vertical COR shift, while the compressive force of FSU is highly sensitive to the horizontal COR shift. Additionally, the kinematics and kinetics of the L2–L3 unit are more sensitive to COR location than those of the L4–L5 unit.

Clinical Relevance of Cervical Kinematic Quality Parameters in Planar Movement

Comprehending cervical spinal motion underlies the understanding of the mechanisms of cervical disorders. We aimed to better define the clinical relevance of cervical spine kinematics, focusing on quality parameters describing cervical spine planar motion. The most common study focuses were kinematic quality parameters after cervical arthroplasty and in normal subjects, patients with cervical degeneration, and patients with cervical deformities. Kinematic quality parameters are important for cervical degeneration prevention, being detected sooner than differences on imaging examinations and being significantly related to the degree of cervical degeneration. Kinematic quality parameters are effective for evaluating the changes of cervical motion pattern after cervical fusion and non‐fusion, assessing operative and adjacent segments in the early stages, and predicting adjacent segment degeneration. However, owing to current research limitations, and controversy about the changes of kinematic quality parameters after different surgical procedures, current assessments are limited to cervical spine flexion and extension. Different osteotomy methods of cervical deformity have different effects on cervical motion patterns and quality parameters. Choosing the most effective surgical method remains a challenge and kinematic quality parameters in cervical deformity are important future research topics. This review highlights the instantaneous center of rotation, the center of rotation, and the instantaneous axis of rotation as being important kinematic quality parameters of cervical spinal motion. These can be used to detect abnormal cervical mobility, to diagnose cervical degeneration, to design disc protheses, and to evaluate surgical effects earlier than other methods. Owing to limitations of research methods there is variation in the way parameters are defined by various researchers. No uniform standard exists for defining degenerative motion quality parameters in normal asymptomatic, degenerative, and postoperative patients. Therefore, further study is required. New study techniques and defining kinematic quality parameters in normal subjects will clarify the definitions of these parameters, enhancing their future clinical usefulness.

Normal intervertebral segment rotation of the subaxial cervical spine: An in vivo study of dynamic neck motions

Background

Accurate knowledge of the intervertebral center of rotation (COR) and its corresponding range of motion (ROM) can help understand development of cervical pathology and guide surgical treatment.

Methods

Ten asymptomatic subjects were imaged using MRI and dual fluoroscopic imaging techniques during dynamic extension-flexion-extension (EFE) and axial left-right-left (LRL) rotation. The intervertebral segment CORs and ROMs were measured from C34 to C67, as the correlations between two variables were analyzed as well.

Results

During the EFE motion, the CORs were located at 32.4 ± 20.6%, -2.4 ± 11.7%, 21.8 ± 12.5% and 32.3 ± 25.5% posteriorly, and the corresponding ROMs were 13.8 ± 4.3°, 15.1 ± 5.1°, 14.4 ± 7.0° and 9.2 ± 4.3° from C34 to C67. The ROM of C67 was significantly smaller than other segments. The ROMs were not shown to significantly correlate to COR locations (r = −0.243, p = 0.132). During the LRL rotation cycle, the average CORs were at 85.6 ± 18.2%, 32.3 ± 25.3%, 15.7 ± 12.3% and 82.4 ± 31.3% posteriorly, and the corresponding ROMs were 3.5 ± 1.7°, 6.9 ± 3.8°, 9.6 ± 4.1° and 2.6 ± 2.5° from C34 to C67. The ROMs of C34 and C67 was significantly smaller than those of C45 and C56. A more posterior COR was associated with a less ROM during the neck rotation (r = −0.583, p < 0.001). The ROMs during EFE were significantly larger than those during LRL in each intervertebral level.

Conclusion

The CORs and ROMs of the subaxial cervical intervertebral segments were segment level- and neck motion-dependent during the in-vivo neck motions.

The translational potential of this article

Our study indicates that the subaxial cervical intervertebral CORs and ROMs were segment level- and neck motion-dependent. This may help to improve the artificial disc design as well as surgical technique by which the neck functional motion is restored following the cervical arthroplasty.

Changes in cervical motion after cervical spinal motion preservation surgery

BACKGROUND

For patients with single-level cervical radiculopathy, various types of motion preservation surgeries, such as total disc replacement (TDR), posterior cervical foraminotomy (PCF) and posterior percutaneous endoscopic foraminotomy and discectomy (PECF), are available. In addition to motion preservation, the quality of motion is an important issue. The aim of the present study was to evaluate the influence of these surgeries on cervical motion by comparing the instantaneous axis of rotation (IAR) among PECF, TDR and PCF at the index and superior/inferior adjacent segments.

METHODS

A retrospective review was performed of patients who underwent index surgery at C5-6 for cervical single-level foraminal disc herniation or foraminal stenosis. Patients with minimal degeneration at the index and other cervical spinal levels and flexion/extension cervical lateral radiographs both preoperatively and 6 months postoperatively were included (PECF, 11 patients; TDR, 11 patients; PCF, 12 patients). The IARs were calculated at the index segment and segments above and below the index segment from the flexion and extension cervical lateral radiographs, which were obtained preoperatively and 6 months postoperatively. A standardized cervical normogram was referenced to qualify shifts in the IAR.

RESULTS

Postoperatively, neck pain was significantly decreased, with no difference among the surgical methods. The IARs were not significantly changed after the PECF. Although significant inferior shift occurred at C6-7 after TDR (p = 0.02), the shift occurred within the normal range in the cervical normogram. However, significant inferior shifts in the IARs occurred after PCF at C5-6 (p = 0.02) and C6-7 (p = 0.02), and the IARs moved out of the normal range.

CONCLUSIONS

The IARs were significantly changed after PCF at either the index segment or the adjacent segment below. The shifts in IAR at the index and adjacent segments were not significant after PECF and TDR. The sample size was too small to allow definitive conclusions, but the present study showed that PECF may be another alternative to motion preservation surgeries.

Dimensional changes of the neuroforamina in subaxial cervical spine during in vivo dynamic flexion-extension

BACKGROUND CONTEXT

Neuroforaminal stenosis is one of the key factors causing clinical symptoms in patients with cervical radiculopathy. Previous quantitative studies on the neuroforaminal dimensions have focused on measurements in a static position. Little is known about dimensional changes of the neuroforamina in the cervical spine during functional dynamic neck motion under physiological loading conditions.

PURPOSE

This study aimed to investigate the in vivo dimensional changes of the neuroforamina in human cervical spine (C3-C7) during dynamic flexion-extension neck motion.

STUDY DESIGN

A case-control study was carried out.

METHODS

Ten asymptomatic subjects were recruited for this study. The cervical spine of each subject underwent magnetic resonance image scanning for construction of three-dimensional (3-D) vertebrae models from C3 to C7. The cervical spine was then imaged using a dual fluoroscopic system while the subject performed a dynamic flexion-extension neck motion in a sitting position. The 3-D vertebral models and the fluoroscopic images were used to reproduce the in vivo vertebral motion. The dimensions (area, height, and width) were measured for each cervical neuroforamen (C3/C4, C4/C5, C5/C6, and C6/C7) in the following functional positions: neutral position, maximal flexion, and maximal extension. Repeated measures analysis of variance and post hoc analysis were used to examine the differences between levels and positions.

RESULTS

Compared with the neutral position, almost all dimensional parameters (area, height, and width) of the subaxial cervical neuroforamina decreased in extension and increased in flexion, except the neuroforaminal area at C5/C6 (p=.07), and the neuroforaminal height at C6/C7 (p=.05) remained relatively constant from neutral to extension. When comparisons of the overall change fromextension to flexion were made between segments, the overall changes of the neuroforaminal area and height revealed no significant differences between segments, and the width overall change of the upper levels (C3/C4 and C4/C5) was significantly greater than the lower levels (C5/C6 and C6/C7) (p<.01).

CONCLUSIONS

The dimensional changes of the cervical neuroforamina showed segment-dependent characteristics during the dynamic flexion-extension. These data may have implications for diagnosis and treatment of patients with cervical radiculopathy.

Narrative review of the in vivo mechanics of the cervical spine after anterior arthrodesis as revealed by dynamic biplane radiography

Arthrodesis is the standard of care for numerous pathologic conditions of the cervical spine and is performed over 150,000 times annually in the United States. The primary long-term concern after this surgery is adjacent segment disease (ASD), defined as new clinical symptoms adjacent to a previous fusion. The incidence of adjacent segment disease is approximately 3% per year, meaning that within 10 years of the initial surgery, approximately 25% of cervical arthrodesis patients require a second procedure to address symptomatic adjacent segment degeneration. Despite the high incidence of ASD, until recently, there was little data available to characterize in vivo adjacent segment mechanics during dynamic motion. This manuscript reviews recent advances in our knowledge of adjacent segment mechanics after cervical arthrodesis that have been facilitated by the use of dynamic biplane radiography. The primary observations from these studies are that current in vitro test paradigms often fail to replicate in vivo spine mechanics before and after arthrodesis, that intervertebral mechanics vary among cervical motion segments, and that joint arthrokinematics (i.e., the interactions between adjacent vertebrae) are superior to traditional kinematics measurements for identifying altered adjacent segment mechanics after arthrodesis. Future research challenges are identified, including improving the biofidelity of in vitro tests, determining the natural history of in vivo spine mechanics, conducting prospective longitudinal studies on adjacent segment kinematics and arthrokinematics after single and multiple-level arthrodesis, and creating subject-specific computational models to accurately estimate muscle forces and tissue loading in the spine during dynamic activities.

The innovative viscoelastic CP ESP cervical disk prosthesis with six degrees of freedom: biomechanical concepts, development program and preliminary clinical experience

The viscoelastic cervical disk prosthesis ESP is an innovative one-piece deformable but cohesive interbody spacer. It is an evolution of the LP ESP lumbar disk implanted since 2006. CP ESP provides six full degrees of freedom about the three axes including shock absorbtion. The prosthesis geometry allows limited rotation and translation with resistance to motion (elastic return property) aimed at avoiding overload of the posterior facets. The rotation center can vary freely during motion. The concept of the ESP prosthesis is fundamentally different from that of the devices currently used in the cervical spine. The originality of the concept of the ESP^® prosthesis led to innovative and intense testing to validate the adhesion of the viscoelastic component of the disk on the titanium endplates and to assess the mechanical properties of the PCU cushion. The preliminary clinical and radiological results with 2-year follow-up are encouraging for pain, function and kinematic behavior (range of motion and evolution of the mean centers of rotation). In this series, we did not observe device-related specific complications, misalignment, instability or ossifications. Additional studies and longer patient follow-up are needed to assess long-term reliability of this innovative implant.

Are the standard parameters of cervical spine alignment and range of motion related to age, sex, and cervical disc degeneration?

OBJECT

The aims of this study were 1) to establish the standard parameters of alignment and total and segmental range of motion (ROM) of the cervical spine in the asymptomatic population, and 2) to identify factors that influence cervical ROM and alignment.

METHODS

The authors measured 636 standard cervical lateral, flexion, and extension plain radiographs of 212 asymptomatic volunteers. The relationship between cervical alignment and total ROM was assessed with simple linear regression. Multivariate linear regression was used to determine the effect of the influential factors on cervical alignment and total and segmental ROM.

RESULTS

The mean value for C2-7 cervical alignment was 21.40° ± 12.15°, and the mean value for total ROM was 63.59° ± 15.37°. Sex was a significant factor in cervical alignment, total ROM, and segmental ROM for C2-3 and C5-6 (p < 0.05). Age had a significant negative association with both the total ROM and all of the segmental ROM measurements (p < 0.05). Cervical disc degeneration at the level of interest had a significant negative association with C4-5, C5-6, and C6-7 ROM (p < 0.05).

CONCLUSIONS

Cervical alignment in female subjects was 2.47° lower than that in male subjects. Total ROM was 3.86° greater in female than in male subjects and decreased 6.46° for each decade of aging. Segmental ROM decreased 1.28° for each decade of aging and 2.26° for each category increase in disc degeneration at the level of interest.