Relationship between iliac screw loosening and proximal junctional kyphosis after long thoracolumbar instrumented fusion for adult spinal deformity

Three-column osteotomy in long constructs has lower rates of proximal junctional kyphosis and better restoration of lumbar lordosis than anterior column realignment

PURPOSE

Three-column osteotomies (TCOs) and minimally invasive techniques such as anterior column realignment (ACR) are powerful tools used to restore lumbar lordosis and sagittal alignment. We aimed to appraise the differences in construct and global spinal stability between TCOs and ACRs in long constructs.

METHODS

We identified consecutive patients who underwent a long construct lumbar or thoracolumbar fusion between January 2016 and November 2021. "Long construct" was any construct where the uppermost instrumented vertebra (UIV) was L2 or higher and the lowermost instrumented vertebra (LIV) was in the sacrum or ileum.

RESULTS

We identified 69 patients; 14 (20.3%) developed PJK throughout follow-up (mean 838 days). Female patients were less likely to suffer PJK (p = 0.009). TCO was more associated with open (versus minimally invasive) screw/rod placement, greater number of levels, higher UIV, greater rate of instrumentation to the ilium, and posterior (versus anterior) L5-S1 interbody placement versus the ACR cohort (p < 0.001, p < 0.001, p < 0.001, p < 0.001, p = 0.005, respectively). Patients who developed PJK were more likely to have undergone ACR (12 (32.4%) versus 2 (6.3%, p = 0.007)). The TCO cohort had better improvement of lumbar lordosis despite similar preoperative measurements (ACR: 16.8 ± 3.78°, TCO: 23.0 ± 5.02°, p = 0.046). Pelvic incidence-lumbar lordosis mismatch had greater improvement after TCO (ACR: 14.8 ± 4.02°, TCO: 21.5 ± 5.10°, p = 0.042). By multivariate analysis, ACR increased odds of PJK by 6.1-times (95% confidence interval: 1.20-31.2, p = 0.29).

CONCLUSION

In patients with long constructs who undergo ACR or TCO, we experienced a 20% rate of PJK. TCO decreased PJK 6.1-times compared to ACR. TCO demonstrated greater improvement of some spinopelvic parameters.

Incidence and Risk Factors of the Caudal Screw Loosening after Pelvic Fixation for Adult Spinal Deformity: A Systematic Review and Meta-analysis

The purpose of this study was to assess the factors affecting caudal screw loosening after spinopelvic fixation for adult patients with spinal deformity. This meta-analysis calculated the weighted mean difference (WMD) and odds ratio (OR) using Review Manager ver. 5.3 (RevMan; Cochrane, London, UK). The loosening group was older than the control group (WMD, 2.17; 95% confidence interval [CI], 0.48-3.87; p=0.01). The S2 alar-iliac (S2AI) could prevent the caudal screw from loosening (OR, 0.43; 95% CI, 0.20-0.94; p=0.03). However, gender distribution (p=0.36), the number of fusion segments (p=0.24), rod breakage (p=0.97), T-score (p=0.10), and proximal junctional kyphosis (p=0.75) demonstrated no difference. Preoperatively, only pelvic incidence (PI) in the loosening group was higher (WMD, 5.08; 95% CI, 2.71-7.45; p<0.01), while thoracic kyphosis (p=0.09), lumbar lordosis (LL) (p=0.69), pelvic tilt (PT) (p=0.31), pelvic incidence minus lumbar lordosis (PI-LL) (p=0.35), sagittal vertical axis (SVA) (p=0.27), and T1 pelvic angle (TPA) demonstrated no difference (p=0.10). PI-LL (WMD, 6.05; 95% CI, 0.96-11.14; p=0.02), PT (WMD, 4.12; 95% CI, 0.99-7.26; p=0.01), TPA (WMD, 4.72; 95% CI, 2.35-7.09; p<0.01), and SVA (WMD, 13.35; 95% CI, 2.83-3.87; p=0.001) were higher in the screw loosening group immediately postoperatively. However, TK (p=0.24) and LL (p=0.44) demonstrated no difference. TPA (WMD, 8.38; 95% CI, 3.30-13.47; p<0.01), PT (WMD, 6.01; 95% CI, 1.47-10.55; p=0.01), and SVA (WMD, 23.13; 95% CI, 12.06-34.21; p<0.01) were higher in the screw loosening group at the final follow-up. However, PI-LL (p=0.17) demonstrated no significant difference. Elderly individuals were more susceptible to the caudal screw loosening, and the S2AI screw might better reduce the caudal screw loosening rate than the iliac screws. The lumbar lordosis and sagittal alignment should be reconstructed properly to prevent the caudal screw from loosening. Measures to block sagittal alignment deterioration could also prevent the caudal screw from loosening.

Junctional Failures at Both Ends After Long Fusion Arthrodesis Stopping at L5: Incidences and Risk Factors

OBJECTIVE

Junctional failures after long fusion stopping at L5 can present at both proximal and distal ends. The purpose of this study was to investigate incidences and risk factors of proximal junctional failure (PJF) and distal junctional failure (DJF) after long lumbar instrumented fusion stopping at L5 for adult spinal deformity.

METHODS

Sixty-three patients who underwent long fusion surgery stopping at L5 with a minimum follow-up of 3 years were reviewed retrospectively. PJF and DJF were defined as newly developed back pain and/or radiculopathy with corresponding radiographic failures. The incidence and risk factors of each junctional failure were analyzed using a log-rank test and Cox proportional hazards model.

RESULTS

Twelve men and 51 women were included in our study. Their mean age was 68.5 ± 7.0 years and the mean follow-up period was 84.5 ± 45.3 months. PJF and DJF occurred in 17 (27%) and 16 patients (25.4%), respectively. PJF and DJF developed at median durations of 32.1 months and 13.3 months, respectively, showing no significant difference between the two. Three patients presented with both PJF and DJF. Risk factors for PJF included lower body mass index, higher preoperative lumbar lordosis, and higher postoperative sagittal vertical axis (SVA) (hazard ratio, 0.570, 1.055, and 1.040, respectively). For DJF, higher preoperative SVA was an independent risk factor (hazard ratio, 1.010).

CONCLUSIONS

After long fusion surgery stopping at L5, PJF and DJF occurred at similar rates. Lower body mass index, higher preoperative lumbar lordosis, and higher postoperative SVA were risk factors for PJF. Higher preoperative SVA was an independent risk factor for DJF.

The Incidence of Iliac Screw-Related Complications After Long Fusion Surgery in Patients with Adult Spinal Deformity

STUDY DESIGN

Retrospective study.

OBJECTIVE

To investigate the long-term clinical outcome and incidence of iliac screw-related complications in patients with adult spinal deformity (ASD).

SUMMARY OF BACKGROUND DATA

Rigid lumbosacral fixation is crucial to achieve optimal global alignment and successful long-term clinical outcomes.

METHODS

The data of eligible patients with ASD who underwent spinopelvic fixation using bilateral iliac screws with at least 5-year follow-up periods were retrospectively analyzed. Iliac screw loosening and rod breakage between the S1 and iliac (S1/IL) screws were defined as distal instability (DI). Demographic data, health-related quality of life scores, and spinopelvic parameters in the DI group were compared with those in the non-DI group. Sub-group analyses were performed between the cases with and without alignment change after rod fracture at S1/IL.

RESULTS

Of the 159 patients, the data of 110 patients (15 men, 95 women; mean age, 67.8 yr) were analyzed. The follow-up rate was 69%. Forty-five (41%) patients showed DI (29 cases [26%] in screw loosening, 16 cases [15%] in rod breakage). Eight patients (7.3%) required revision surgery because of iliac screw-related complications. No significant differences were observed in the Oswestry Disability Index and Scoliosis Research Society questionnaire (revised) scores between the DI and non-DI groups. The patients with iliac screw loosening showed significantly greater values of preoperative pelvic incidence, pelvic tilt (PT), and postoperative PT, and T1-pelvic angle. In patients with rod breakage at S1/IL, five patients (31%) who had associated mechanical complications showed an alignment change between pre and post rod breakage. They showed significantly higher and lower rates of high-grade osteotomies and L5/S interbody fusion, respectively.

CONCLUSION

The incidence rate of iliac screw-related complications was relatively high. However, they had a little effect on sagittal alignment deterioration and there were few cases that required revision surgery.Level of Evidence: 4.

Complications of adult spinal deformity surgery: A literature review

Purpose:

Adult spinal deformity incidence increases accordingly as the population ages. Even though surgery is the best option for the treatment, the complications due to surgery are pretty challenging. This study aims to review the complication rates of adult spinal deformity surgery.

Methods:

A literature review of the last decade was performed searching for the query “Adult spine deformity and complication.” This search yielded 2781 results, where 79 articles were chosen to investigate the complications of adult spinal deformity surgery. In addition, the demographic data, surgical interventions, and complications were extracted from the publications.

Results:

A total of 26,207 patients were analyzed, and 9138 complications were found (34.5%). Implant failure, including screw loosening, breakage, distal and proximal junctional kyphosis, were the most common complications. The neurologic complications were about 10.8%, and the infection rate was 3.6%. Cardiac and pulmonary complications were about 4.8%.

Discussion:

Age, body mass index, smoking, osteoporosis, and other comorbidities are the significant risk factors affecting adult spinal deformity surgery. Presurgical planning and preoperative risk factor assessment must be done to avoid complications. Furthermore, intra and postoperative complications affect the patients’ quality of life and length of stay, and hospital readmissions. Revision surgery also increases the risk of complications.

Conclusion:

Good patient evaluation before surgery and careful planning of the surgery are essential in avoiding complications of adult spinal deformity.

Which Is More Predictive Value for Mechanical Complications: Fixed Thoracolumbar Alignment (T1 Pelvic Angle) Versus Dynamic Global Balance Parameter (Odontoid-Hip Axis Angle)

Objective

In this study, we investigate about relationship between postoperative global sagittal imbalance and occurrence of mechanical complications after adult spinal deformity (ASD) surgery. In global sagittal balance parameters, odontoid-hip axis (OD-HA) angle and T1 pelvic angle (TPA) were analyzed.

Methods

Between January 2009 and December 2016, 199 consecutive patients (26 males and 173 females) with ASD underwent corrective fusion of more than 4 levels and were followed up for more than 2 years. Immediate postoperative and postoperative 2 years whole spine x-rays were checked for evaluating immediate postoperative OD-HA, TPA, and other parameters. In clinical outcomes, back and leg pain visual analogue scale, Scoliosis Research Society-22 spinal deformity questionnaire (SRS-22), Oswestry Disability Index (ODI), 36-item Short Form Health Survey (SF-36) were evaluated.

Results

Based on the occurrence of mechanical complications, a comparative analysis was performed for each parameter. In univariable analysis, mechanical complications were significantly much more occurred in OD-HA abnormal group (odds ratio [OR], 3.296; p<0.001; area under the curve [AUC]=0.645). In multivariable analysis, the result was much more related (OR, 2.924; p=0.001; AUC=0.727). In contrast, there was no significant difference between normal and the occurrence of mechanical complications in TPA. In clinical outcomes (normal vs. abnormal), the differences of SRS-22 (0.88±0.73 vs. 0.68±0.64, p=0.042), ODI (-24.72±20.16 vs. -19.01±19.95, p=0.046), SF-36 physical composite score (19.33±18.55 vs. 12.90±16.73, p=0.011) were significantly improved in OD-HA normal group.

Conclusion

The goal of ASD surgery is to improve patient life quality through correction. In our study, TPA was associated with spinopelvic parameter and OD-HA angle was associated with health-related quality of life and complications. OD-HA angle is predictable factor for mechanical complications after ASD surgery.

Utilization of S1 Foraminal Hooks for Augmentation of S1 Screws in Adult Spinal Deformity Surgery: Comparative Study With Iliac Screws

OBJECTIVE

To compare the outcomes of S1 foraminal hooks and iliac screws regarding fusion rate at the lumbosacral junction and protective effects on S1 screws.

METHODS

From January 2017 to December 2019, consecutive patients who underwent long fusions (uppermost instrumented vertebra at or above L1) to the sacrum for adult spinal deformity were enrolled. Patients were divided into S1 foraminal hook group and iliac screw group. Radiographic parameters and the incidence of pseudarthrosis and instrument failure at the lumbosacral junction were compared between the groups.

RESULTS

Twenty-nine patients (male:female = 1:28) with a mean age of 73.6 ± 6.8 years were evaluated. Sixteen patients (55.2%) had S1 foraminal hook fixation and 13 patients (44.8%) had iliac screw fixation. Lumbar lordosis, sacral slope, and sagittal vertical axis did not differ between the groups preoperatively and postoperatively. The rate of L5/S1 pseudarthrosis was significantly higher in S1 foraminal hook group (5 of 16, 31.3%), compared to iliac screw group (0 of 13, 0%; p = 0.048). Instrument failure at the lumbosacral junction trended toward a higher rate in S1 foraminal hook group (6 of 16, 37.5%) than in iliac screw group (1 of 13, 7.7%), without statistical significance (p = 0.09). Proximal junctional kyphosis/failure occurred less often in S1 foraminal hook group (2 of 16, 12.5%) than in iliac screw group (3 of 13, 30.8%) without statistical significance (p = 0.36).

CONCLUSION

Treatment with S1 foraminal hooks achieved equivalent satisfactory sagittal correction with proportioned alignment compared to that with iliac screws. However, S1 foraminal hooks did not provide enough structural support to the lumbosacral junction in long fusions to the sacrum.

Incidence, Risk, and Outcome of Pedicle Screw Loosening in Degenerative Lumbar Scoliosis Patients Undergoing Long-Segment Fusion

STUDY DESIGN

Retrospective study.

OBJECTIVE

To investigate the incidence, risk factors, and outcomes of pedicle screw loosening in degenerative lumbar scoliosis (DLS) undergoing long-segment spinal fusion surgery.

METHODS

One hundred and thirty DLS patients who underwent long-segment fusion surgery with at least a 12-month follow-up were studied. The incidence and risk factors of screw loosening were investigated. VAS, SRS-22, and ODI scores were obtained preoperatively and at follow-up.

RESULTS

One hundred and sixty-eight of 1784 (9.4%) screws showed evidence of loosening in 71 (54.6%) patients. Three patients required revision surgery. Screw loosening rates according to vertebral insertion level were lowest instrumented vertebra (LIV): 45.4%; uppermost instrumented vertebra (UIV):17.7%; one vertebra above the LIV: 0.5%; 2 vertebrae above the LIV: 0.4%. Multiple logistic regression analysis of possible risk factors indicated that preoperative lateral subluxation ≥8 mm (odds ratio [OR]: 2.68, 95% confidence interval [CI]: 1.16-6.20), osteopenia (OR: 5.52, 95% CI: 1.64-18.56), osteoporosis (OR: 8.19, 95% CI: 2.40-27.97), fusion to sacrum (OR: 2.55, 95% CI: 1.12-5.83), postoperative TLK greater than 10° (OR: 2.63, 95% CI: 1.14-6.04) and SVA imbalance (OR: 3.44, 95% CI: 1.17-10.14) were statistically significant. No difference was noted in preoperative, follow-up, and change of VAS, ODI, and SRS-22 scores.

CONCLUSIONS

Screw loosening in DLS underwent long-segment surgery is common and tends to occur in the LIV or UIV. Lateral subluxation ≥8 mm, osteopenia, osteoporosis, fusion to the sacrum, postoperative TLK greater than 10°, and SVA imbalance were the independent influencing factors. Screw loosening can be asymptomatic, while longer-term follow-up is required.