Fluorescence enhancement assay for trace iron(II) using Pyr-tempo as a spin label fluorescent probe

Sol-gel based optical sensor for determination of Fe (II): a novel probe for iron speciation

A highly selective optical sensor for Fe (II) ions was developed based on entrapment of a sensitive reagent, 2,4,6-tri(2-pyridyl)-s-triazine (TPTZ), in a silica sol-gel thin film coated on a glass substrate. The thin films fabricated based on tetraethoxysilane (TEOS) as precursor, sol-gel pH∼3, water:alkoxyde ratio of 4:1 and TPTZ concentration of 0.112 mol L(-1). The influence of sol-gel parameters on sensing behavior of the fabricated sensor was also investigated. The fabricated sensor can be used for determination of Fe (II) ion with an outstanding high selectivity over a dynamic range of 5-115 ng mL(-1) and a detection limit of 1.68 ng mL(-1). It also showed reproducible results with relative standard deviation of 3.5% and 1.27% for 10 and 90 ng mL(-1) of Fe (II), respectively, along with a fast response time of ∼120 s. Total iron also was determined after reduction of Fe (III) to Fe (II) using ascorbic acid as reducing agent. Then, the concentration of Fe (III) was calculated by subtracting the concentration of Fe (II) from the total iron concentration. Interference studies showed a good selectivity for Fe (II) with trapping TPTZ into sol-gel matrix and appropriately adjusting the structure of doped sol-gel. The sensor was compared with other sensors and was applied to determine iron in different water samples with good results.

Reaction-based turn-on fluorescent probes with magnetic responses for Fe2+ detection in live cells

A highly selective reaction-based “turn-on” fluorescent sensor is capable of detecting Fe²⁺ in mitochondria with distinct EPR responses.

Spectral study of the interaction between 2-pyridinecarbaldehyde-p-phenyldihydrazone and ferric iron and its analytical application

The synthesis and spectral characterization of a schiff base, 2-pyridinecarbaldehyde-p-phenylenedihydrazone (short for 2PC-PPH), were described. It was found that ferric ion (Fe(3+)) could selectively quench the fluorescence of 2PC-PPH, whereas many other metal ions, such as Mn(2+), Zn(2+), Cu(2+), K(+), Al(3+), Ca(2+), Ni(2+), Co(2+), Cr(3+) and Fe(2+), could not quench its fluorescence. Based on this, a sensitive method for ferric ion selective detection was established. Under the optimum conditions, the decreasing fluorescence intensity of 2PC-PPH is proportional to the concentration of Fe(3+) within the range of 6.0×10(-7)-1.0×10(-5) mol L(-1). The detection limit (3σ) for Fe(3+) determination is 3.6×10(-7) mol L(-1). The proposed method was successfully applied to determine iron in tea and milk powder.