Sensitive chemiluminescence method for the determination of glutathione, l-cysteine and 6-mercaptopurine

An ultrasensitive chemiluminescent biosensor for tracing glutathione in human serum using BSA@AuNCs as a peroxidase-mimetic nanozyme on a luminol/artesunate system

In this work, a nanosensor chemiluminescent (CL) probe for sensing glutathione (GSH) was developed, for the first time, based on its inhibition of the intrinsic peroxidase-mimetic effect of BSA@AuNCs. The endoperoxide linkage of artesunate could be hydrolyzed by BSA@AuNCs resulting in the release of reactive oxygen species (ROS), and the consequent generation of strong CL emission. By virtue of the strong covalent interactions of -S⋯Au-, GSH could greatly suppress the peroxidase-mimetic effect of BSA@AuNCs, leading to a drastic CL quenching. The CL quenching efficiency increased proportionally to the logarithm of GSH concentration through the linearity range of 50.0-5000.0 nM with a limit of detection of 5.2 nM. This CL-based strategy for GSH tracing demonstrated the advantages of ultrasensitivity, high selectivity and simplicity. This strategy was successfully utilized to measure GSH levels in human serum with reasonable recovery results of 98.71%, 103.18%, and 101.68%, suggesting that this turn-off CL sensor is a promising candidate for GSH in biological and clinical samples.

A screen printed electrode modified with Fe3O4@polypyrrole-Pt core-shell nanoparticles for electrochemical detection of 6-mercaptopurine and 6-thioguanine

In this paper, Fe₃O₄@ppy-Pt core-shell nanoparticles (NPs) could be produced and utilized for the development of a novel electrochemical sensor to detect 6-mercaptopurine (6-MP). 6-MP determination was examined by cyclic voltammetry (CV), chronoamperometry (CHA), linear sweep voltammetry (LSV), and differential pulse voltammetry (DPV) at Fe₃O₄@ppy-Pt core-shell NPs modified screen printed electrode (Fe₃O₄@ppy-Pt/SPE) in phosphate buffered solution (PBS). The outcomes obtained from DPV demonstrated that the Fe₃O₄@ppy-Pt/SPE proved a linear concentration range among 0.04 and 330.0 μM having a detection limit of 10.0 nM for 6-MP. Also, modified electrode was satisfactorily utilized to detect 6-MP in the presence of 6-thioguanine (6-TG). This sensor showed two separate oxidative peaks at 530 mV for 6-MP and at 730 mV for 6-TG with a peak potential separation of 200 mV which was large enough for simultaneous detection of the two anticancer drugs. In addition, the proposed sensor presented long-term stability, good repeatability, and excellent reproducibility. Finally, the modified electrode demonstrated satisfactory outcomes while used in real samples, proposing the appropriate potential of Fe₃O₄@ppy-Pt/SPE in the case of clinical diagnosis, biological samples and pharmaceutical compounds analysis.

Integration of 3D Hydrodynamic Focused Microreactor with Microfluidic Chemiluminescence Sensing for Online Synthesis and Catalytical Characterization of Gold Nanoparticles

Chemiluminescence assays have shown great advantages compared with other optical techniques. Gold nanoparticles have drawn much attention in chemiluminescence analysis systems as an enzyme-free catalyst. The catalytic activity of gold nanoparticles for chemiluminescence sensing depends on size, shape and the surface charge property, which is hard to characterize in batches. As there is no positive or negative correlation between chemiluminescence signals and sizes of gold nanoparticles, the best way to get optimal gold nanoparticles is to control the reaction conditions via online chemiluminescence sensing systems. Therefore, a new method was developed for online synthesis of gold nanoparticles with a three-dimension hydrodynamic focusing microreactor, directly coupled with a microfluidic chemiluminescence sensing chip, which was coupled to a charge-coupled device camera for direct catalytical characterization of gold nanoparticles. All operations were performed in an automatic way with a program controlled by Matlab. Gold nanoparticles were synthesized through a single-phase reaction using glucose as a reducing agent and stabilizer at room temperature. The property of gold nanoparticles was easily controlled with the three-dimension microreactor during synthesis. The catalyst property of synthesized gold nanoparticles was characterized in a luminol-NaOCl chemiluminescence system. After optimizing parameters of synthesis, the chemiluminescence signal was enhanced to a factor of 171. The gold nanoparticles synthesized under optimal conditions for the luminol-NaOCl system were stable for at least one month. To further investigate the catalytic activity of synthesized gold nanoparticles in various situations, two methods were used to change the property of gold nanoparticles. After adding a certain amount of salt (NaCl), gold nanoparticles aggregated with a changed surface charge property and the catalytic activity was greatly enhanced. Glutathione was used as an example of molecules with thiol groups which interact with gold nanoparticles and reduce the catalytic activity. The chemiluminescence intensity was reduced by 98.9%. Therefore, we could show that using a microreactor for gold nanoparticles synthesis and direct coupling with microfluidic chemiluminescence sensing offers a promising monitoring method to find the best synthesis condition of gold nanoparticles for catalytic activity.

A New Electrochemical Sensor for Direct Detection of Purine Antimetabolites and DNA Degradation

The development of a reliable electrochemical sensor using a hybrid nanocomposite consisting of ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) functionalized graphene oxide (GrO-IL) and gold nanoparticles (AuNPs) stabilized by chitosan (Chit) was described. The new sensor, labelled as GrO-IL-AuNPs-Chit/CSE, exhibited an improved electrocatalytic response to cancer drugs such as purine antimetabolites (6-thioguanine, 6-mercaptopurine, and azathioprine) in a wide concentration range with a low detection limit (20-40 nmol·L^-1, S/N = 3), and satisfactory recoveries (97.1-103.0%). The sensor has been also successfully used for cyclic voltammetric study of a salmon sperm double-stranded DNA degradation and DNA-6-mercaptopurine interaction in aqueous solutions (pH 7.4).

Two Highly Stable Luminescent Lead Phosphonates Based on Mixed Ligands: Highly Selective and Sensitive Sensing for Thymine Molecule and VO3 - Anion

Two luminescent lead phosphonates with two-dimensional (2D) layer and three-dimensional (3D) framework structure, namely, Pb₃[(L₁)₂(Hssc)(H₂O)₂] (1) and [Pb₂(L₂)_0.5(bts)(H₂O)₂]·H₂O (2) (H₂L₁ = O(CH₂CH₂)₂NCH₂PO₃H₂, H₄L₂ = H₂PO₃CH₂NH(C₂H₄)₂NHCH₂PO₃H₂, H₃ssc = 5-sulfosalicylic acid, NaH₂bts = 5-sulfoisophthalic acid sodium) have been prepared via hydrothermal techniques. The two compounds not only show excellent thermal stability but also remain intact in aqueous solution within an extensive pH range. Moreover, the atomic absorption spectroscopy analysis experiment indicates that there does not exist the leaching of Pb²⁺ ions from the lead phosphonates, which show they are nontoxic in aqueous solution. In compound 1, the Pb(1)O₄, Pb(2)O₇, Pb(3)O₄, and CPO₃ polyhedra are interlinked into a one-dimensional chain, which is further connected to adjacent chain by sharing the Hssc^2- to form a 2D layer. Interestingly, compound 1 as a highly selective and sensitive luminescent material can be used to detect the thymine molecule with a very low detection limit of 8.26 × 10^-7 M. In compound 2, the Pb(1)O₆ and Pb(2)O₅ polyhedra are interlinked into a dimer via edge sharing, which is further connected to adjacent dimer to form a tetramer via corner sharing, and such a tetramer is then interlinked into a 2D layer through bts^3- ligands; the adjacent 2D layers are finally constructed to a 3D structure by sharing the L₂ ^4- ligand. Compound 2 can be applied as an excellent luminescent sensor for sensing of VO₃ ^- anion. Furthermore, the probable fluorescent quenching mechanisms of the two compounds have also been studied.

Surface plasmon resonance based spectrophotometric determination of medicinally important thiol compounds using unmodified silver nanoparticles

The determination of thiol based biological molecules and drugs, such as cysteine (Cys) (I), α-lipoic acid (II), and sodium 2-sulfanylethane sulphonate (Mesna (III)) in human plasma are becoming progressively more important due to the growing body of knowledge about their essential role in numerous biological pathways. Herein we demonstrate a sensitive colorimetric sensor for the determination of medicinally important thiol drugs based on aggregation of the citrate capped silver nanoparticles (Ag NPs). This approach exploited the high affinity of thiols towards the Ag NPs surface which could tempt replacement of the citrate shell by the thiolate shell of target molecules, resulting in aggregation of the NPs through intermolecular electrostatic interaction or hydrogen-bonding. Because of aggregation, the plasmon band at around 400nm decreases gradually, along with the appearance of a new band connoting a red shift. The calibration curves are derived from the intensity ratios of A₅₃₀/A₄₀₀, which display a linear relation in the range of 1μM-150μM, 5μM-200μM and 10μM-130μM, respectively. The obtained detection limits (3σ) were found to be 1.5μM, 5.6μM and 10.2μM for compound I-III, respectively. The proposed method has been successfully applied for the detection of thiol compounds in real samples.

Resonance light scattering determination of 6-mercaptopurine coupled with HPLC technique

A simple, fast, costless, sensitive and selective method of resonance light scattering coupled with HPLC was established for the determination of 6-mercaptopurine in human urine sample. In a Britton-Robinson buffer solution of pH5.5, the formation of coordination complex between 6-mercaptopurine and metal palladium (II) led to enhance the RLS intensity of the system. The RLS signal was detected by fluorescence detector at λ(ex)=λ(em)=315 nm. The analytical parameters were provided by the coupled system, the linear of 6-mercaptopurine response from 0.0615 to 2.40 μg L(-1) and the limit of detection (S/N=3) was 0.05 μg L(-1). The presented method has been applied to determine 6-mercaptopurine in human urine samples which obtained satisfactory results. Moreover, the reaction mechanism and possible reasons for enhancement of RLS were fully discussed.

Fabrication and characterization of Cu(OH)2/CuO nanowires as a novel sensitivity enhancer of the luminol–H2O2chemiluminescence system: determination of cysteine in human plasma

Cu(OH)₂/CuO nanowires as a sensitivity enhancer in luminol–H₂O₂chemiluminescence system and its application for the determination of cysteine.

Silver nanoparticles enhanced a novel TCPO-H₂O₂-safranin O chemiluminescence system for determination of 6-mercaptopurine

The present study deals with first attempt to introduce safranin O as the fluorophore for peroxyoxalate chemiluminescence system. The reaction of bis-(2,4,6-trichlorophenyl) oxalate (TCPO) with H2O2 catalyzed by silver nanoparticles can transfer energy to safranin O via the formation of dioxetanedione intermediate and emits orange-red light. The relationship between CL intensity and the concentration of TCPO, fluorophore, hydrogen peroxide and nanocatalyst was investigated. The Ag nanoparticles were synthesized by chemical reduction method and characterized using scanning electron microscopy, particle size analyzer and UV-spectroscopy. Moreover, the system was applied successfully to detect a drug, 6-mercaptopurine (6-MP) in pharmaceuticals. Under optimum conditions, a linear working range for 6-MP concentrations from 5.5 × 10(-7) to 5.5 × 10(-5)mol L(-1) (r>0.9831, n=6) was obtained with a detection limit of 1.6 × 10(-7)mol L(-1). The relative standard deviation for 6 repetitive determinations was less than 3.8% and recoveries of 98% and 103% were obtained.

A new fluorescent nitrogen-doped carbon dot system modified by the fluorophore-labeled ssDNA for the analysis of 6-mercaptopurine and Hg (II)

A simple, environmentally friendly hydrothermal method was used to prepare strongly luminescent, nitrogen-doped carbon dots (NCDs) with the use of Chinese yams as a source of carbon and nitrogen. Such NCDs have an average size of 2.7±1.4 nm; they emit blue light at 420 nm and have a quantum yield of up to 9.3%. Thus, carboxyfluorescein (FAM)-DNA macro-molecules were assembled on the surfaces of the NCDs, and stabilised by strong π-π stacking; the so formed hybrid nano-sensors were found to have an ultra-sensitive response to 6-mercaptopurine (6-MP). A strong emission and enhancement of yellow radiation was observed from FAM. Furthermore, due to the specific interactions between DNA and Hg(2+), which resulted in the formation of the T-Hg(2+)-T (T: thymine base) complex - a large, conjugated system, which formed between NCDs, DNA and 6-MP, was broken up. Thus, the fluorescence from FAM was quenched. The detection limits for 6-MP and Hg(2+) were 0.67 and 1.26 nM, respectively. The proposed method was applied for the determination of 6-MP in human serum and Hg(2+) in water samples with satisfactory results.

Glutathione

Glutathione is an endogenous peptide with antioxidant and other metabolic functions. The nomenclature, formulae, elemental composition, and appearance and uses of the drug are included. The methods used for the synthesis and biosynthesis of glutathione are described. This profile contains the physical characteristics of the drug including: solubility, X-ray powder diffraction pattern, crystal structure, melting point, and differential scanning calorimetry. The spectral methods that were used for both the identification and analysis of glutathione include ultraviolet spectrum, vibrational spectrum, 1H and 13C nuclear magnetic resonance spectra, and mass spectrum. The profile also includes the compendial methods of analysis and the other methods of analysis that are reported in the literature. These other methods of e-analysis are: potentiometric, voltammetric, amperometric, spectrophotometric, specrtofluorometric, chemiluminescence, chromatographic and immunoassay methods. The stability of and several reviews on drug are also provided. More than 170 references are listed at the end this comprehensive profile on glutathione.

Selective recognition of 6-mercaptopurine based on luminescent metal-organic frameworks Fe-MIL-88NH₂

A novel and rapid spectrofluorometry method for the recognition of 6-mercaptopurine (6-MP) has been developed based on luminescent metal-organic frameworks Fe-MIL-88NH2 as fluorescent probe. The strong fluorescence of Fe-MIL-88NH2 at 430 nm could be quenched by 6-MP directly, and the Fe-MIL-88NH2 shows high selectivity for 6-MP compared to other thiol-containing amino acids such as homocysteine (Hcy), cysteine (Cys), glutathione (GSH), etc. Under optimal conditions, the relative fluorescence intensity was linearly proportional to the concentration of 6-MP in the range of 5-600 μM with the detection limit at 1.17 μM (S/N=3). Furthermore, the present approach has been successfully applied to the determination of 6-MP in human serum samples. The possible fluorescence quenching mechanism has also been investigated, where it is revealed that the quenching was attributed to competition of absorption of the light source energy as well as electron transfer between Fe-MIL-88NH2 and 6-MP.

A metal (Co)–organic framework-based chemiluminescence system for selective detection of l-cysteine

A metal (Co)–Organic Framework–luminol chemiluminescence system was successfully established for the determination of l-cysteine.

Spectrophotometric Determination of 6-Mercaptopurine in Pharmaceutical Sample Using Fe(III)-Potassium Ferricyanide System

In the present work,we developed a simple,fast,sensitive and inexpensive method to determine 6-mercaptopurine (6-MP) in pharmaceutical sample using Fe (III)-potassium ferricyanide system by spectrophotometry.The results show that in acid medium, Fe (Ш) can be reduced to Fe (II) by hydrosulfuryl (-SH) in 6-Mercaptopurin molecule, and then Fe (II) reacts with potassium ferricyanide to form a soluble Prussian blue (KFeIII[FeII(CN)6]),the content of 6-MP was determinated indirectly through determinating the absorbance of the soluble Prussian blue.The various effect factors on the determination of 6-MP by spectrophotometry using potassium Fe (III)-ferricyanide system were investigated in detail.The maximum absorption wavelength of chromogenic system was 755 nm, good linear relationship was obtained between the absorbance and the concentration of 6-MP in the range of 0.4120~2.884 μ g·/mL,the equation of the linear regression was A=0.0411+0.1462C (μ g·/mL),with a linear correlation coefficient was 0.9991.This proposed method had been successfully applied to determinate of 6-MP in real pharmaceutical,and the results agreed well with those obtained by pharmacopoeial method.

Ultrasensitive Chemiluminescence Detection of Indoleacetic Acid Catalyzed by Silver Nanoparticles

A flow injection chemiluminescence (CL) method has been developed for the determination of indoleacetic acid (IAA). It is based on the fact that the weak CL of Ce(IV)-Ru(phen)32+ system is strongly enhanced in the presence of silver nanoparticles. Optimum conditions and possible mechanisms have been investigated. Under optimum experimental conditions, the linear range is from 1.0×10-8 – 6.0×10-7 g mL-1 with a detection limit 9.0×10-9 g mL-1