Method for determination of microcystin-leucine-arginine in water samples based on the quenching of the fluorescence of bioconjugates between CdSe/CdS quantum dots and microcystin-leucine-arginine antibody

A highly sensitive electrochemical aptasensor for detection of microcystin-LR based on a dual signal amplification strategy

In this work, a sensitive and selective electrochemical aptasensor for determination of microcystin-LR (MC-LR) was developed based on a dual signal amplification system consisting of a novel ternary composite and horseradish peroxidase (HRP). The ternary composite was prepared by depositing gold nanoparticles (AuNPs) on molybdenum disulfide (MoS2) covered TiO2 nanobeads (TiONBs). MoS2 nanosheet modified TiONBs provided a large surface area for immobilization of AuNPs and biomolecules. The ternary composite also possesses an improved electron transfer and catalytic capability. To construct the aptasensor, thiolated MC-LR aptamers were immobilized on the AuNP@MoS2-TiONB modified electrode through a gold-sulfur bond. Then, biotin-cDNA with a sequence complementary to the MC-LR aptamer competed with MC-LR for binding to the immobilized aptamer. The current signal catalyzed by avidin-HRP decreased with the increase of MC-LR, based on which a linear range of 0.005-30 nM and a detection limit of 0.002 nM were obtained.

Quantum-dot antibody conjugation visualized at the single-molecule scale with high-speed atomic force microscopy

Conjugates of semiconductor quantum dots (QDs) and antibodies have emerged as a promising bioprobes due to their great combination of QD's efficient fluorescence and the high specificity of antigen-antibody reactions. For further developments in this field, it is essential to understand the molecular conformation of the QD-antibody conjugates at the single-molecule scale. Here, we report on the direct imaging of QD-antibody conjugates at the single-molecule scale by using high-speed atomic force microscopy (HS-AFM). Owing to the high spatiotemporal resolution of HS-AFM, we observed the dynamic splitting of individual antibodies during the conjugation process. QD-antibody conjugates were also clearly visualized at the single-molecule scale details. Several important features were even discovered through dynamic observation of the QD-antibody conjugates. We observed an intermediate state of conjugation, where the antibodies attached and detached to QDs repeatedly. We also revealed that the attached antibodies were not steady but drastically fluctuated in their recognition areas due to the Brownian motion. We also demonstrated that HS-AFM observation is useful for the quantitative analysis of fabricated conjugates.

Recent developments in antibody-based assays for the detection of bacterial toxins

Considering the urgent demand for rapid and accurate determination of bacterial toxins and the recent promising developments in nanotechnology and microfluidics, this review summarizes new achievements of the past five years. Firstly, bacterial toxins will be categorized according to their antibody binding properties into low and high molecular weight compounds. Secondly, the types of antibodies and new techniques for producing antibodies are discussed, including poly- and mono-clonal antibodies, single-chain variable fragments (scFv), as well as heavy-chain and recombinant antibodies. Thirdly, the use of different nanomaterials, such as gold nanoparticles (AuNPs), magnetic nanoparticles (MNPs), quantum dots (QDs) and carbon nanomaterials (graphene and carbon nanotube), for labeling antibodies and toxins or for readout techniques will be summarized. Fourthly, microscale analysis or minimized devices, for example microfluidics or lab-on-a-chip (LOC), which have attracted increasing attention in combination with immunoassays for the robust detection or point-of-care testing (POCT), will be reviewed. Finally, some new materials and analytical strategies, which might be promising for analyzing toxins in the near future, will be shortly introduced.

State of knowledge and concerns on cyanobacterial blooms and cyanotoxins

Cyanobacteria are ubiquitous microorganisms considered as important contributors to the formation of Earth's atmosphere and nitrogen fixation. However, they are also frequently associated with toxic blooms. Indeed, the wide range of hepatotoxins, neurotoxins and dermatotoxins synthesized by these bacteria is a growing environmental and public health concern. This paper provides a state of the art on the occurrence and management of harmful cyanobacterial blooms in surface and drinking water, including economic impacts and research needs. Cyanobacterial blooms usually occur according to a combination of environmental factors e.g., nutrient concentration, water temperature, light intensity, salinity, water movement, stagnation and residence time, as well as several other variables. These environmental variables, in turn, have promoted the evolution and biosynthesis of strain-specific, gene-controlled metabolites (cyanotoxins) that are often harmful to aquatic and terrestrial life, including humans. Cyanotoxins are primarily produced intracellularly during the exponential growth phase. Release of toxins into water can occur during cell death or senescence but can also be due to evolutionary-derived or environmentally-mediated circumstances such as allelopathy or relatively sudden nutrient limitation. Consequently, when cyanobacterial blooms occur in drinking water resources, treatment has to remove both cyanobacteria (avoiding cell lysis and subsequent toxin release) and aqueous cyanotoxins previously released. Cells are usually removed with limited lysis by physical processes such as clarification or membrane filtration. However, aqueous toxins are usually removed by both physical retention, through adsorption on activated carbon or reverse osmosis, and chemical oxidation, through ozonation or chlorination. While the efficient oxidation of the more common cyanotoxins (microcystin, cylindrospermopsin, anatoxin and saxitoxin) has been extensively reported, the chemical and toxicological characterization of their by-products requires further investigation. In addition, future research should also investigate the removal of poorly considered cyanotoxins (β-methylamino-alanine, lyngbyatoxin or aplysiatoxin) as well as the economic impact of blooms.

Dithizone functionalized CdSe/CdS quantum dots as turn-on fluorescent probe for ultrasensitive detection of lead ion

An ultrasensitive fluorescent probe is developed for the determination of lead ion by utilizing dithizone (Dz) functionalized CdSe/CdS quantum dots (QDs). Dithizone was bound to the QDs via a surface coordinating reaction to form QDs-Dz conjugates and quench fluorescence of the QDs by fluorescence resonance energy transfer (FRET) mechanism. Upon the addition of Pb(2+), a dramatic enhancement of the fluorescence intensity was observed, which resulted from the FRET pathway shutting off, and hence the fluorescence of the QDs was recovered. Two successive linear ranges of 0.01-1000 nmol L(-1) and 1-20 μmol L(-1) allow a very wide determination of Pb(2+) concentration from 0.01 nmol L(-1) to 20 μmol L(-1), with a detection limit of 0.006 nmol L(-1). The fluorescent probe was successfully applied to the determination of lead in environmental samples with satisfactory results.

Applications of quantum dots as probes in immunosensing of small-sized analytes

Quantum dots (QDs) are semiconductor nanoparticles with very interesting optical properties, like high quantum yield or narrow and size-tuneable fluorescence spectra. Current applications of QDs are widespread, their use as fluorescence labels in bioassays being one of the most promising. These nanoparticles are usually conjugated to highly specific biomolecules like antibodies, oligonucleotides, enzymes or aptamers to improve assay selectivity. In this review, QD surface passivation, conjugation to biomolecules, and purification strategies are discussed with special emphasis to the development of QD-based immunoassays for the detection of low molecular weight compounds given the relevance of this sort of analytes in health, food safety, pharmaceutical, or environmental monitoring areas. The aim of this review is to summarise the main achievements attained so far and to initialise researchers in the field of antibody-based assays employing QDs as labels, such as fluorescence-linked immunosorbent assay (FLISA), fluorescence (or Förster) resonance energy transfer (FRET), immunochromatographic methods, and immunosensors.