Determination of methylcyclopentadienyl-manganese tricarbonyl in gasoline and water via ionic-liquid headspace single drop microextraction and electrothermal atomic absorption spectrometry

Microextraction and its application for petroleum and crude oil samples

Petroleum is an extremely heterogeneous material. It consists of a wide range of aliphatic, aromatic, and compounds containing heteroatoms such as metals, sulfur, and nitrogen. The American Society for Testing and Materials (ASTM) methods are used globally as accepted analytical methods for petroleum, petrochemicals, and fuels. A major drawback of ASTM methods is that they require multistep sample preparation that consumes substantial volumes of samples. Thus, the challenge in the petrochemical analysis is to develop rapid and simpler sample preparation procedures that can be automated. An assessment based on the current literature, specifically on the sample preparation of petroleum samples, leads to the authors' conclusion that microextraction provides an excellent complement to current methods. In this review, solvent and sorbent-based microextraction techniques in the context of the consideration of petroleum and crude oil, and samples related to the petrochemical industry, are discussed.

Preconcentration and Analytical Methods for Determination of Methyl Tert-Butyl Ether and Other Fuel Oxygenates and Their Degradation Products in Environment: A Review

Fuel oxygenates (FOs) are mainly ethers or alcohols which are added to gasoline either to boost the octane number or to make the fuel burning process more "cleaner" with increasing the oxygen content, or to obtain a combination of both effects. FOs are water soluble with high mobility in the environment which presence even at very low concentrations lower the quality of water making it unsafe or unpleasant due to their objectionable taste and/or odor. Thus, their determination at trace in environmental samples is of high importance because of their sparingly biodegradability and their biological hazards. Instruments such as gas chromatography, Fourier transform infrared spectroscopy and ion mobility spectrometry are mainly used for the determination of FOs. However, the main challenge for determination of such oxygenates relates to proper sample preparation. Dilute or complex samples often demand a specific treatment to ensure effective enrichment of FOs before their detection. The main techniques used for this purpose are purge and trap, membrane extraction, and solid phase microextraction. This review presents a comprehensive evaluation of extraction/preconcentration techniques and analytical methods for determination of FOs in environmental samples. Advantages and disadvantages of each method are discussed in details along with critical evaluation of currently available methods.

Dynamic ultrasonic nebulisation extraction coupled with headspace ionic liquid-based single-drop microextraction for the analysis of the essential oil in Forsythia suspensa

INTRODUCTION

Ionic liquids have attracted much attention as an extraction solvent instead of traditional organic solvent in single-drop microextraction. However, non-volatile ionic liquids are difficult to couple with gas chromatography. Thus, the following injection system for the determination of organic compounds is described.

OBJECTIVE

To establish an environmentally friendly, simple, and effective extraction method for preparation and analysis of the essential oil from aromatic plants.

METHODS

The dynamic ultrasonic nebulisation extraction was coupled with headspace ionic liquid-based single-drop microextraction(UNE-HS/IL/SDME)for the extraction of essential oils from Forsythia suspense fruits. After 13 min of extraction for 50 mg sample, the extracts in ionic liquid were evaporated rapidly in the gas chromatography injector through a thermal desorption unit (5 s). The traditional extraction method was carried out for comparative study.

RESULTS

The optimum conditions were: 3 μL of 1-methyl-3-octylimidazolium hexafluorophosphate was selected as the extraction solvent, the sample amount was 50 mg, the flow rate of purging gas was 200 mL/min, the extraction time was 13 min, the injection volume was 2 μL, and the thermal desorption temperature and time were 240 °C and 5 s respectively. Comparing with hydrodistillation (HD), the proposed method was environment friendly and efficient.

CONCLUSION

The proposed method is environmentally friendly, time saving, with high efficiency and low consumption. It would extend the application range of the HS/SDME and would be useful especially for aromatic plants analysis.