Low-potential amperometric determination of NADH using a disposable indium-tin-oxide electrode modified with carbon nanotubes

Portable electrochemical carbon cloth analysis device for differential pulse anodic stripping voltammetry determination of Pb2

A novel electrochemical carbon cloth (CC) analysis device (eCAD) is proposed for the determination of Pb²⁺ in environmental water samples, which was assembled using a single-step functional CC as both the sensing and the substrate material. The modified CC was characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectra, and electrochemical impedance spectroscopy. The increase in electrochemical activity is due to the increased defective extent and excellent electrochemical activity of CC. Under optimum conditions (viz. a pH value of 4.5, deposition time of 160 s), the sensor is capable of determining Pb²⁺ by differential pulse anodic stripping voltammetry (DPASV) at a typical working potential of - 1.0 V (vs. Ag/AgCl). Response is linear from 5.0 × 10^-9 to 3.0 × 10^-6 M Pb²⁺, and the detection limit is 4.8 nM (at S/N = 3). The sensor was successfully applied to the determination of Pb²⁺ in real samples, with apparent recoveries from 96.0 to 102.0% and a relative standard deviation of less than 3.4%. In addition, the integration of the sensor with signal collection components has enabled us to realize on-site analysis of Pb²⁺, which is highlighted as a new generation of electrode platform for the development of a portable analysis device.Graphical abstract.

Porous PtAg nanoshells/reduced graphene oxide based biosensors for low-potential detection of NADH

A superior NADH sensing platform was constructed based on porous PtAg nanoshells supported on reduced graphene oxide (PtAg/rGO) in the absence of any enzymes and redox mediators. The PtAg/rGO composite was prepared via one-step reduction combined with galvanic replacement reaction. The as-made PtAg/rGO assembles multiple structural advantages of coherent conductive matrix, rich electroactive sites, and high specific surface area, accompanied by the unique alloying effect. The PtAg/rGO possesses adequate active reaction sites and fluent electron transport pathway towards the electrocatalytic NADH oxidation, thus presenting significantly increased oxidation current and negative shift of 330 mV in applied potential relative to the bare GCE. By virtues of the outstanding electrocatalytic activity, PtAg/rGO exhibits effective amperometric detection of NADH at 0.15 V within a wide linear concentration range of 2-2378 μM, a high sensitivity of 92.62 μA mM^-1 cm^-2, low detection limit of 0.2 μM, and long-term detection over 2500 s. Moreover, the as-constructed biosensors can achieve accurate NADH detection in human serum samples, indicating its promising application feasibility in fundamental and clinic research. Graphical Abstract Porous PtAg alloy nanoshells supported on reduced graphene oxide (PtAg/rGO) was prepared via a facile one-step reduction and spontaneous replacement reaction strategy. A sensitive and highly stable electrochemical biosensor based on PtAg/rGO is constructed for the quantitative detection of NADH at low applied potential.

Positively-charged hierarchical PEDOT interface with enhanced electrode kinetics for NADH-based biosensors

Poly(ethylenedioxythiophene) (PEDOT) has attracted considerable attention as an advanced electrode material for electrochemical sensors and biosensors, due to its unique electrical and physicochemical properties. Here, we demonstrate the facile preparation of a positively-charged and hierarchical micro-structured PEDOT electrochemical interface with enhanced electrode kinetics for the electrooxidation of NADH. Processable PEDOT colloidal microparticles (PEDOT CMs) were synthesised by template-assisted polymerisation and were then utilised as building blocks for the fabrication of hierarchically-structured electrodes with a larger accessible electroactive surface (2.8 times larger than that of the benchmark PEDOT:PSS) and inter-particle space, thus improving electrode kinetics. The intrinsic positive charge of the PEDOT CMs further facilitated the detection of negatively-charged molecules by electrostatic accumulation. Due to the synergistic effect, these hierarchically-structured PEDOT CMs electrodes exhibited improved NADH electrooxidation at lower potentials and enhanced electrocatalytic activity compared to the compact structure of conventional PEDOT:PSS electrodes. The PEDOT CMs electrodes detected NADH over the range of 20-240 μM, with a sensitivity of 0.0156 μA/μM and a limit of detection of 5.3 μM. Moreover, the PEDOT CMs electrode exhibited a larger peak separation from the interferent ascorbic acid, and improved stability. This enhanced analytical performance for NADH provides a sound basis for further work coupling to a range of NAD-dependent dehydrogenases for applications in biosensing, bio-fuel cells and biocatalysis.

Electrochemical immunosensors - A powerful tool for analytical applications

Immunosensors are biosensors based on interactions between an antibody and antigen on a transducer surface. Either antibody or antigen can be the species immobilized on the transducer to detect antigen or antibody, respectively. Because of the strong binding forces between these biomolecules, immunosensors present high selectivity and very high sensitivity, making them very attractive for many applications in different science fields. Electrochemical immunosensors explore measurements of an electrical signal produced on an electrochemical transductor. This signal can be voltammetric, potentiometric, conductometric or impedimetric. Immunosensors utilizing electrochemical detection have been explored in several analyses since they are specific, simple, portable, and generally disposable and can carry out in situ or automated detection. This review addresses the potential of immunosensors destined for application in food and environmental analysis, and cancer biomarker diagnosis. Emphasis is given to the approaches that have been used for construction of electrochemical immunosensors. Additionally, the fundamentals of immunosensors, technology of transducers and nanomaterials and a general overview of the possible applications of electrochemical immunosensors to the food, environmental and diseases analysis fields are described.