Colorimetric determination of sulfide using chitosan-capped silver nanoparticles

Core-shell structured lignin-stabilized silver nanoprisms for colorimetric detection of sulfur ions

Widespread occurrence of sulfides in domestic and industrial wastewater contributes to environmental pollution and poses risks to human health. Therefore, the development of highly selective, sensitive, and rapid sulfur ion (S2-) detection probes in aquatic ecosystems is of paramount importance. In this study, lignin-stabilized silver nanoprisms (EHL@AgNPRs) were prepared using the seed growth and self-assembly methods. Based on this, a novel, high-performance, and environmentally friendly S2- colorimetric detection method was proposed. Lignin is believed to coat the surface of AgNPRs through cation-π and electrostatic interactions, acting as an excellent dispersant and stabilizer to prevent aggregation and shape deformation. This allows AgNPRs to maintain localized surface plasmon resonance (LSPR) characteristics and superior colorimetric sensing sensitivity towards S2- even after 30 d. The EHL@AgNPRs exhibited remarkable selectivity towards S2- with a minimum detection limit of 41.3 nM. The conjugation of lignin with AgNPRs offers a highly promising approach for the rapid detection of S2- in natural aquatic environments and for the valorization of lignin.

Facile preparation of dihydrolipoic acid-stabilized red-emitting silver nanoclusters as a sensitive fluorometric probe for sulfide ions detection

In this work, we report a smartphone-integrated paper-based sensor for the determination of sulfide ions (S2-) using water-soluble dihydrolipoic acid stabilized silver nanoclusters (DHLA-AgNCs) as a nanoprobe. The optical properties of red emitting fluorescent DHLA-AgNCs was confirmed by UV-visible, steady state flourometric spectroscopic studies. The HR-TEM analysis revealed that the morphology of DHLA-AgNCs was quasi spherical with a grain size of ∼ 5.2 nm. The DHLA-AgNCs exhibited bright red luminescence with strong emission band centered at 650 nm upon the excitation at 420 nm. The excellent fluorescence property of DHLA-AgNCs was further utilized for fluorometric determination of S2- ions. The DHLA-AgNCs can be effectively quenched by increasing concentration of S2- ions owing to the formation of Ag2S complex. The DHLA-AgNCs probe could detect S2- ions preferentially even in the presence of other possible interfering anions with a limit of detection of 32.71 nM. In addition, the proposed technique was effectively used to detect S2- ions in environmental water samples such as tap and drinking water. The detect S2- ions detection was assay and showed good agree compared with the conventional methylene blue approach and showed comparable results. Moreover, a smartphone-paper-based detection assay was developed using the DHLA-AgNCs probe for highly selective and sensitive determination of S2- ions.

Novel H2S sensing mechanism derived from the formation of oligomeric sulfide capping the surface of gold nanourchins

A gold nanourchin (AuNU) probe with a novel sensing mechanism for monitoring H2S was developed as a feasible colorimetric sensor. In this study, AuNUs that are selectively responsive to H2S were fabricated in the presence of trisodium citrate and 1,4-hydroquinone using a seed-mediated approach. Upon exposure of the AuNU solution to H2S, the hydrosulfide ions (HS-) in the solution are converted into oligomeric sulfides by 1,4-hydroquinone used as a reducing agent during the synthesis of AuNUs. The oligomeric sulfides formed in the AuNU solution upon the addition of H2S were found to coat the surface of the AuNUs, introducing a blue shift in absorption accompanied by a color change in the solution from sky blue to light green. This colorimetric alteration by the capping of oligomeric sulfides on the surface of AuNUs is unique compared to well-known color change mechanisms, such as aggregation, etching, or growth of nanoparticles. The novel H2S sensing mechanism of the AuNUs was characterized using UV-Vis spectroscopy, high-resolution transmission microscopy, X-ray photoelectron spectroscopy, surface-enhanced Raman spectroscopy, secondary ion mass spectroscopy, liquid chromatography-tandem mass spectrometry, and atom probe tomography. H2S was reliably monitored with two calibration curves comprising two sections with different slopes according to the low (0.3-15 μM) and high (15.0-300 μM) concentration range using the optimized AuNU probe, and a detection limit of 0.29 μM was obtained in tap water.

Simultaneous fluorescence sensing of vitamin B2 and sulfur ions based on fluorescent copper nanoparticles

In this study, the F-CuNPs were synthesized by a modified liquid-phase chemical reduction method. Throughout the preparation process, anhydrous copper sulfate was used as the copper source, and ascorbic acid in the NaOH solution served as the reducing and protective agent. Förster resonance energy transfer (FRET) may exist between F-CuNPs and vitamin B2 due to the large spectral overlap between the fluorescence emission spectra of F-CuNPs and the UV-vis absorption spectra of vitamin B2. Therefore, the detection of vitamin B2 was designed based on a FRET system between F-CuNPs and vitamin B2. With S^2- into the F-CuNPs&VB2 system, the fluorescence intensity of vitamin B2 was quenched, while the fluorescence intensity of F-CuNPs was almost unchanged. There may be a specific reaction between S^2- and vitamin B2. Therefore, the research system can be further used to detect S^2- based on ratiometric fluorescent probe. The research findings show that the linear range of vitamin B2 was 0.51 nM-34.64 nM with a detection limit of 0.25 nM (S/N = 3), the linear range of S^2- was 0.64 μM-60.00 μM with a detection limit of 0.32 μM (S/N = 3). Furthermore, the simultaneous fluorescent sensing system has high sensitivity and selectivity. Therefore, this system was designed and successfully used to detect the content of vitamin B2 and S^2- in actual samples to find a new effective method to detect analytes.

Fabrication of chitosan-MnO2‑iridium/nanoceria supported nanoparticles: Catalytic and anti-radical activities

Chitosan capped MnO₂‑iridium nanoparticles supported on nanoceria (Ch-MnO₂-Ir/CeO₂) were fabricated by using combination of colloidal solution and metal displacement galvanic methods. The oxidative degradation of acid orange 7 in aqueous solution by activated persulfate with the as-prepared nanoparticles was studied. The resulting Ch-MnO₂-Ir/CeO₂ with S₂O₈^2-, 80 % degraded 70.06 mg/L of acid orange 7 within 100 min, while at the same time, Ch-Ir, Ch-MnO₂, and Ch-Ir-MnO₂ remained inactive. CeO₂ increased the surface of the catalyst, and also improved the reactive oxygen species site of Ch-Ir-MnO₂ through the activation of S₂O₈^2- with CeO₂. The reversible redox cycle reaction, Ce (III) ↔ Ce (IV) and strong synergistic effect of MnO₂-Ir are responsible for the remarkable catalytic performance of Ch-MnO₂-Ir/CeO₂/S₂O₈^2- system. The degradation of acid orange 7 could be significantly retarded with inorganic (NO₃^- < Cl^- < SO₄^2- < H₂PO₄^- < HCO₃^-) and organic scavengers (ethanol < tertiary butanol < benzoquinone < phenol). Ch-MnO₂-Ir/CeO₂ exhibited excellent stability and reusability. Anti-radical activity of chitosan and Ch-MnO₂-Ir/CeO₂ was evaluated with 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical. The free radical properties increase with concentration of chitosan and Ch-MnO₂-Ir/CeO₂.

A Critical Review of Analytical Applications of Chitosan as a Sustainable Chemical with Functions Galore

Biomass and biowastes stand as sustainable and cost-effective environmentally benign alternative feedstock. Chitosan is a biocompatible, bioactive, and biodegradable biopolymer derived from chitin to achieve eight aspects out of the 12 green chemistry principles. Chitosan got significant attention in several fields including chemical analysis, in addition to chemical functionally, which enabled its use as adsorbent and its structural crosslinking using various crosslinkers. The physicochemical, technological, and optical properties of chitosan have been extensively exploited in analysis. Mainly, deacetylation degree and molecular weight are controlling its properties and hence controlling its functions. This review presents a structure, properties, and functions relationships of chitosan. It also aims to provide an overview of the different functions that chitosan can serve in each analytical technique such as supporting matrix, catalyst…etc. The contribution of chitosan in improving the ecological performance is discussed in each technique.

Sensitive and highly selective colorimetric biosensing of vitamin-C and vitamin-B1 by flavoring agent-based silver nanoparticles

A sensitive scheme was established for the detection of vitamin C (Ascorbic acid) and vitamin B1 (Thiamin HCl) using Maltol capped AgNPs (McAgNPs) as colorimetric sensor. The designed scheme showed an instant alteration in color from yellow to orange and green for vitamin-C and vitamin B1 sequentially. The probe was sensitive in a concentration range of (0-1 µM) with limit of detection 0.064 and 0.038 µM for vitamin C and vitamin B1 sequentially. The interaction mechanism between vitamin C and vitamin B1 and McAgNPs was evaluated by visible spectroscopy, FTIR, and AFM. Vitamin C attaches on the surface of nanoparticles by C=O group, while OH, C-S-C, and NH₂ groups are involved in the binding of vitamin B1 with McAgNPs. The Vit-C/Vit-B1-McAgNPs complexes were stable over a wide range of pHs. The size of McAgNPs increased after the interaction of vitamin C/vitamin B1 from 30-40 nm to 500 and 400 nm sequentially. The scheme was successfully applied for the detection of vitamin C and vitamin B1 in urine, plasma, water, and commercial pharmaceutical tablets with good recoveries. The scheme was ascertained to be more sensitive than many other formerly described schemes.

Synthesis and application of CdS nanoparticles-decorated core-shell Ag@Ni nanohybrids for visible-light spectrophotometric assay of sulfide in aqueous sample

Novel Ag@Ni nanosphere decorated with CdS NPs (Ag@Ni-CdS NCs) was synthesized by one step chemical synthesis method. The fabricated NCs were characterized by transmission electron microscope (TEM), scanning electron microscope (SEM), fourier transfer infra-red spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), zeta sizer and particle size analyzer. TEM and XRD confirmed the Ag in core and Ni in shell for the effective formation of Ag@Ni core shell nanosphere. EDAX and XPS spectra of NCs confirms the formation of Ag@Ni-CdS NCs. Zeta potential and particle size of the NCs was found to be 29.5 ± 1.5 mV and 24 ± 1 nm respectively. The complete loss in the peak intensity of Ag@Ni-CdS NCs (localized surface plasmon resonance (LSPR)) at ∼410 nm in presence of S^2- ions was observed which indicates its selective detection towards S^2- ions. The sulfide ion sensing by Ag@Ni-CdS NCs was due to the successive oxidation of Ag results in the formulation of Ag²⁺ ions in the system, which causes the diminishing of LSPR band of NCs. The limit of detection (LOD) of S^2- ions by Ag@Ni-CdS NCs was calculated to be of 2.66 nM. The combination of CdS NPs with core-shell Ag@Ni nanosphere guides a promising strategy for S^2- ions detection from environmental polluted samples.

Ag0 decorated Cr2S3 NPs embedded on PVP matrix: A colorimetric probe for selective and rapid detection of sulphide ions from environmental samples

Globally, the environmental pollution is one of the major issues causing toxicity towards human and aquatic life. We have developed a facile and innovative sensing approach for detection of sulphide ions (S^2-) present in the aqueous media using Ag⁰ decorated Cr₂S₃ NPs embedded on PVP matrix (Ag/Cr₂S₃-PVP). Based on the SPR phenomena, the detection of S^2- ions was established. The nanohybrid was characterized using various techniques such as UV-vis spectrophotometer, High-Resolution Transmission Electron Microscopy (HR-TEM), Thermal Gravimetric Analysis (TGA), X-ray diffraction analysis(XRD), Energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The yellowish colour of Ag/Cr₂S₃-PVP nanohybrid turned to brown colour in presence of S^2- ions. The selectivity and sensitivity of the prepared probe was studied against the other interfering metal ions. In addition, the effect of different concentration of S^2- ions in the nanohybrid solution was investigated and the Limit of detection (LOD) was found to be 6.6 nM. The good linearity was found over the range of 10 nM to 100 μM with R² value of 0.981. The paper strip based probe was developed for rapid onsite monitoring of S^2- ions. The proposed method is found to be cost-effective, rapid, and simple. We have validated the practical applicability of the prepared probe for determining the concentration of S^2- ions in real water samples.

Porous manganese-cobalt oxide microspheres with tunable oxidase mimicking activity for sulfide ion colorimetric detection

Here, we report the controllable synthesis of porous MnxCo1-xO microspheres and tunable catalytic activity in the oxidase mimicking reaction. Mn0.6Co0.4O possesses the best oxidase mimicking activity and can be used successfully in sulfide ion colorimetric detection with a low detection limit of 0.1 μM.

Facile synthesis of AgNPs@SNCDs nanocomposites as a fluorescent 'turn on' sensor for detection of glutathione

The present study illustrates the facile synthesis of silver nanoparticles capped with sulfur and nitrogen co-doped carbon dots (AgNPs@SNCDs) nanocomposites and their application towards the sensitive and selective detection of glutathione (GSH) using a spectrofluorimetry method. SNCDs were synthesized using solvothermal treatment of cysteamine hydrochloride and p-phenylenediamine. The as-fabricated SNCDs were then utilized as capping and stabilizing agents for the preparation of AgNPs@SNCDs nanocomposites using wet chemistry. The size of AgNPs@SNCDs nanocomposites was characterized to be ~37.58 nm or even larger aggregates. Particularly, the quenched fluorescence of AgNPs@SNCDs nanocomposites could be significantly restored upon addition of GSH, and the colour of its solution changed to some extent. The fluorescence intensity ratio of AgNPs@SNCDs nanocomposites at ~450 nm and 550 nm was directly proportional to the GSH concentration within the ranges 8.35-66.83 μM and 66.83-200.5 μM, and the detection limit was 0.52 μM. Furthermore various common organic molecules had no obvious interference in the detection mode. The proposed nanosensor was successfully applied for GSH assay in actual water samples.

Colorimetric determination of cysteamine based on the aggregation of polyvinylpyrrolidone-stabilized silver nanoparticles

A simple, colorimetric and visual method is described for the determination of cysteamine (CA) using polyvinylpyrrolidone-stabilized silver nanoparticles (PVP-AgNPs) as a colorimetric probe. The sensing method was based on the aggregation of PVP-AgNPs that led to the changes in the color and absorption profile of the probe. The aggregation of PVP-AgNPs in the presence of CA was evidenced by using transmission electron microscopy (TEM), zeta and dynamic light scattering (DLS) measurements. A distinct color transition could be observed with the naked eye from pale yellow color of PVP-AgNPs to purple. PVP-AgNPs probe showed an excellent selectivity towards CA versus other interfering biomolecules, cations and anions. Furthermore, the colorimetric probe had a linear response for CA from 0.1 to 1.0 μM concentration range with the limit of detection (LOD) of 4.9 nM. The prepared probe was successfully utilized for the determination of CA in blood serum as biological samples.

A paper-based gas sensor for simultaneous noninstrumental colorimetric detection of nitrite and sulfide in waters

The use of paper-based devices in combination with noninstrumental detection systems is becoming increasingly important in the analytical field due to its simplicity, rapidity, and low cost. However, their use for determination of volatile analyte derivatives is still relatively scarce. The present work reports on the assessment of a paper-based gas-sensing approach for the simultaneous noninstrumental colorimetric detection of nitrite and sulfide. Colorimetric systems based on the Griess and methylene blue assays, formation of colored metallic sulfides, and interaction/reaction with in situ generated metallic nanoparticles were preliminary evaluated. Then, the effect of experimental variables affecting the analytical performance of the paper-based gas sensor was studied with two digitization systems, namely a scanner and a smartphone. Under optimal conditions, the developed system yielded limits of detection of 0.055 and 0.005 mg/L for nitrite and sulfide, respectively. The repeatability, expressed as relative standard deviation, was found to be 5.9 and 6.7% for nitrite and sulfide, respectively. The proposed method was finally applied to the analysis of water samples, showing recoveries in the range of 95-105%.

L-cysteine modified silver nanoparticles for selective and sensitive colorimetric detection of vitamin B1 in food and water samples

The use of L-cysteine modified silver nanoparticles (Cys-capped AgNPs) as a colorimetric probe for determination of vitamin B1 (thiamine) is described in the present work. This method is based on the measurement of red shift of localized surface plasmon resonance (LSPR) band of Cys-capped AgNPs in the region of 200–800 nm. The color of Cys-capped AgNPs was changed from yellow to colorless by the addition of vitamin B1. The mechanism for detection of vitamin B1 is based on the electrostatic interaction between positively charged vitamin B1, which causes the red shift of LSPR band from 390 nm to 580 nm. The interaction between Cys-capped AgNPs and vitamin B1 was theoretically explored by density function theory (DFT) using LANL2DZ basis sets with help of Gaussian 09 (C.01) program. The morphology, size distribution and optical properties of Cys-capped AgNPs were characterized by transmission electron microscope (TEM), UV-Visible spectrophotometry, Fourier transform infrared spectroscopy (FTIR) and dynamic light scattering (DLS) techniques. The method is linear in the range of 25–500 μg mL⁻¹ with correlation coefficient (R²) 0.992 and limit of detection of 7.0 μg mL⁻¹. The advantages of using Cys-capped AgNPs as a chemical sensor in colorimetry assay are being simple, low cost and selective for detection of vitamin B1 from food (peas, grapes and tomato) and environmental (river, sewage and pond) water samples.

A Green, Rapid and Efficient Dual-Sensors for Highly Selective and Sensitive Detection of Cation (Hg2+) and Anion (S2-) Ions Based on CMS/AgNPs Composites

Detection of mercury (Hg²⁺) and sulfide (S²⁻), universal and well-known toxic ions, is crucial in monitoring several diseases. How to design and fabricate the high-performance sensor for simultaneously and accurately detecting the Hg²⁺ and S²⁻ is critical. Herein, we proposed a novel and convenient strategy for optical detection of Hg²⁺ and S²⁻ by employing a carboxymethyl cellulose sodium/silver nanoparticle (CMS/AgNPs) colloidal solution, in which AgNPs were used as monitor for Hg²⁺ and S²⁻, and the CMS was utilized as both the stabilizer and the hydrophilic substrate for AgNPs. Well-identifiable peaks for Hg²⁺ and S^2– were obtained in water based on UV–VIS absorption spectra, the absorbance intensity and/or position of nano-silver vary with the addition of Hg²⁺ cation and S^2– anion, accompanying with color change. Impressively, the optimal AgNPs anchored CMS exhibited a high sensitivity and selectivity toward Hg²⁺ and S²⁻, the change in absorbance was linear with the concentration of Hg²⁺ (0–50 μM) and S²⁻ (15–70 μM), and the lowest limits of detection (LOD) were 1.8 × 10⁻⁸ M and 2.4 × 10⁻⁷ M, respectively. More importantly, owing to the superior properties in testing Hg²⁺ and S²⁻, the fabricated sensor was successfully applied for detection of target ions in lake and tap water samples. All these good results implied that the designed strategy and as-designed samples is promising in detecting cation (Hg²⁺) and anion (S²⁻) ions and open up new opportunities for selecting other kinds of ions.

Facile and Green Fabrication of Carrageenan-Silver Nanoparticles for Colorimetric Determination of Cu2+ and S2

In the present work, silver nanoparticles (AgNPs) were prepared by a simple and green method using carrageenan as reducing and capping agent. The as-synthesized carrageenan-AgNPs was demonstrated as an effective duel colorimetric sensing for selective and sensitive recognition of Cu²⁺ and S²⁻, which could be used to detect these ions with naked eyes. In addition, the possible sensing mechanism was that Cu²⁺ ions caused serious aggregation of carrageenan-AgNPs, which led to the color change of carrageenan-AgNPs. AgNPs were etched by S²⁻ forming Ag₂S, which played an important role in the determination of S²⁻ ions. Furthermore, it has been successfully applied to the determination of Cu²⁺ and S²⁻ in tap water and lake water, showing its great potential for the analysis of environmental water samples.

Gum acacia-based silver nanoparticles as a highly selective and sensitive dual nanosensor for Hg(ii) and fluorescence turn-off sensor for S2− and malachite green detection

A facile and green method was adopted to synthesize highly selective gum acacia-mediated silver nanoparticles as dual sensor (fluorescence turn-on and colorimetric) for Hg(ii) and fluorescence turn-off sensor for S²⁻ and malachite green. The mechanism proposed for a dual response towards Hg(ii) is the redox reaction between Ag(0) and Hg(ii), resulting in the formation of Ag(i) and Hg(0) and electron transfer from gum acacia to Ag(i), which further leads to the formation of an Ag@Hg nanoalloy. The enhanced fluorescence signal was quenched selectively by S²⁻ owing to the formation of Ag₂S and HgS. The reported nanosensor was found to be useful for sensing malachite green via the inner filter effect. The linear ranges were 3 nmol L⁻¹ to 13 μmol L⁻¹ for Hg(ii), 3–170 μmol L⁻¹ for S²⁻ and 7–80 μmol L⁻¹ for malachite green, and the corresponding detection limits were 2.1 nmol L⁻¹ for Hg(ii), 1.3 μmol L⁻¹ for S²⁻ and 1.6 μmol L⁻¹ for malachite green.

Gum acacia-stabilized silver nanoparticles for the detection of Hg(ii), S²⁻ and malachite green.

Smart H2S-Triggered/Therapeutic System (SHTS)-Based Nanomedicine

Hydrogen sulfide (H2S) is of vital importance in several biological and physical processes. The significance of H2S-specific detection and monitoring is emphasized by its elevated levels in various diseases such as cancer. Nanotechnology enhances the performance of chemical sensing nanoprobes due to the enhanced efficiency and sensitivity. Recently, extensive research efforts have been dedicated to developing novel smart H2S-triggered/therapeutic system (SHTS) nanoplatforms for H2S-activated sensing, imaging, and therapy. Herein, the latest SHTS-based nanomaterials are summarized and discussed in detail. In addition, therapeutic strategies mediated by endogenous H2S as a trigger or exogenous H2S delivery are also included. A comprehensive understanding of the current status of SHTS-based strategies will greatly facilitate innovation in this field. Lastly, the challenges and key issues related to the design and development of SHTS-based nanomaterials (e.g., morphology, surface modification, therapeutic strategies, appropriate application, and selection of nanomaterials) are outlined.

Silver nanoparticles capped with carbon dots as a fluorescent probe for the highly sensitive "off-on" sensing of sulfide ions in water

The present study illustrates the synthesis of silver nanoparticles capped with carbon dots (AgNPs-CDs) and their application towards the sensitive and selective sensing of sulfide ions by colorimetry and spectrofluorimetry methods. The CDs were prepared from l-asparagine by pyrolysis at 234 °C. The as-synthesized CDs were then utilized as reducing and capping agents for the synthesis of AgNPs-CDs by the wet chemical method. The size of the AgNPs-CDs was found to be ~ 5.2 nm. They show a characteristic surface plasmon resonance band at 417 nm and emission maximum at 441 nm when excited at 348 nm. Since the AgNPs were formed on the surface of CDs, the emission intensity of AgNPs-CDs was drastically decreased in contrast to that of CDs. The as-synthesized AgNPs-CDs were then successfully used for the sensitive and selective determination of sulfide ions. The addition of 0.1 μM sulfide ions to AgNPs-CDs leads to a decrease in the absorbance intensity at 417 nm aside turning from yellow to colorless. In the contrary, the emission was "turned on" after the addition of sulfide ions. The decrease in the absorbance and increase in the emission were attributed to the rapid formation of Ag₂S. Finally, the practical application of the present method was demonstrated by determining dissolved H₂S in tap water samples.

Regulating peroxidase-like activity of Pd nanocubes through surface inactivation and its application for sulfide detection

The peroxidase-like activity of Pd nanocubes is regulated by the formation of surface PdS layers, which has been applied for sulfide assay in environmental water samples.

Detection and Imaging of Hydrogen Sulfide in Lysosomes of Living Cells with Activatable Fluorescent Quantum Dots

The simple, sensitive, and specific detection of hydrogen sulfide (H₂S) is of great importance because of its crucial role in food safety, environmental pollution, and various pathological and physiological processes. Here, we reported activatable fluorescence nanoprobe-based quantum dots (QDs) for sensitive and selective monitoring of H₂S in red wine, environmental water samples, and lysosome of live cancer cells. The nanoprobe was prepared through a strong electrostatic interaction between thioglycolic-acid-stabilized CdTe QDs and p-amino thiophenol capped silver nanoparticles (AgNPs) that resulted in the formation of the assembled nanostructure, called QD/AgNP nanocomplexes. The initial fluorescence of QDs was effectively quenched by the AgNPs because of the inner filter effect. Upon interaction with H₂S, the strong etching ability of H₂S to AgNPs could trigger the disassembly of QD/AgNP nanocomplexes and generate Ag₂S on the surface of QDs, achieving a shell-core Ag₂S/CdTe QDs with remarkable fluorescence as a result of the termination of inner filter effect. The aqueous solution studies displayed that the assembled QD/AgNP nanoprobe was sensitive to detect H₂S, with a detection limit of 15 nM. In addition, this assembled QD/AgNP nanoprobe showed a high specificity toward H₂S over other anions and biologically relevant species. The subsequent fluorescence imaging studies demonstrated that the assembled QD/AgNP nanoprobe exhibited high ability to enter into cellular lysosome and generated an enhancement fluorescence, which was used for endogenous H₂S detection in lysosome of living cancer cells. This proposed nanoprobe revealed a more simple, rapid, time-saving, low-cost, sensitive, and selective process for monitoring of H₂S in further environmental pollution, food safety, and clinical diagnosis of H₂S-related diseases.

Highly sensitive and selective determination of hydrogen sulfide by resonance light scattering technique based on silver nanoparticles

We have developed a green approach to prepare DNA-templated silver nanoparticles (Ag-NPs) from the direct reaction between Ag⁺ and ascorbic acid in the presence of DNA and sodium hydroxide. The Ag-NPs showed strong resonance light scattering (RLS) intensity property. Then, the interaction between hydrogen sulfide (H₂S) and Ag-NPs was studied by measuring their RLS spectra. The results showed that there is a strong interaction between Ag-NPs and H₂S, which resulted in a decrease in the size of Ag-NPs and a decrease in the RLS intensity of the Ag-NPs solution at the wavelength of 467 nm. The results demonstrated that the RLS technique offers a sensitive and simple tool for investigating the interaction between Ag-NPs and H₂S, which can be applied to detect H₂S with high sensitivity and selectivity without complex readout equipment. The linear range for H₂S determination was found to be the range from 5.0 × 10^-9 to 1.0 × 10^-7 mol L^-1, and the detection limit (3σ/k) was 2.8 × 10^-9 mol L^-1. Moreover, the proposed method was applied for the determination of H₂S in natural water samples with satisfactory results. Graphical abstract The application of Ag-NPs in H₂S detection.

Silver Nanoparticles: Technological Advances, Societal Impacts, and Metrological Challenges

Silver nanoparticles (AgNPs) show different physical and chemical properties compared to their macroscale analogs. This is primarily due to their small size and, consequently, the exceptional surface area of these materials. Presently, advances in the synthesis, stabilization, and production of AgNPs have fostered a new generation of commercial products and intensified scientific investigation within the nanotechnology field. The use of AgNPs in commercial products is increasing and impacts on the environment and human health are largely unknown. This article discusses advances in AgNP production and presents an overview of the commercial, societal, and environmental impacts of this emerging nanoparticle (NP), and nanomaterials in general. Finally, we examine the challenges associated with AgNP characterization, discuss the importance of the development of NP reference materials (RMs) and explore their role as a metrological mechanism to improve the quality and comparability of NP measurements.

Photo-mediated optimized synthesis of silver nanoparticles for the selective detection of Iron(III), antibacterial and antioxidant activity

The AgNPs synthesized by green method have shown great potential in several applications such as biosensing, biomedical, catalysis, electronic etc. The present study deals with the selective colorimetric detection of Fe³⁺ using photoinduced green synthesized AgNPs. For the synthesis purpose, an aqueous extract of Croton bonplandianum (AEC) was used as a reducing and stabilizing agent. The biosynthesis was confirmed by UV-visible spectroscopy where an SPR band at λ_max 436nm after 40s and 428nm after 30min corresponded to the existence of AgNPs. The optimum conditions for biosynthesis of AgNPs were 30min sunlight exposure time, 5.0% (v/v) AEC inoculum dose and 4mM AgNO₃ concentration. The stability of synthesized AgNPs was monitored up to 9months. The size and shape of AgNPs with average size 19.4nm were determined by Field Emission Scanning Electron Microscope (FE-SEM) and High-Resolution Transmission Electron Microscope (HR-TEM). The crystallinity was determined by High-Resolution X-ray Diffractometer (HR-XRD) and Selected Area Electron Diffraction (SAED) pattern. The chemical and elemental compositions were determined by Fourier Transformed Infrared Spectroscopy (FTIR) and Energy Dispersive X-ray Spectroscopy (EDX) respectively. The Atomic Force Microscopy (AFM) images represented the lateral and 3D topological characteristics of AgNPs. The XPS analysis confirmed the presence of two individual peaks which attributed to the Ag 3d3/2 and Ag 3d5/2 binding energies corresponding to the presence of metallic silver. The biosynthesized AgNPs showed potent antibacterial activity against both gram-positive and gram-negative bacterial strains as well as antioxidant activity. On the basis of results and facts, a probable mechanism was also proposed to explore the possible route of AgNPs synthesis, colorimetric detection of Fe³⁺, antibacterial and antioxidant activity.