Highly chemiluminescent metal-organic framework of type MIL-101(Cr) for detection of hydrogen peroxide and pyrophosphate ions

Simple, sensitive, colorimetric detection of pyrophosphate via the analyte-triggered decomposition of metal-organic frameworks regulating their adaptive multi-color Tyndall effect

This paper describes initially the application of the Tyndall effect (TE) of metal-organic framework (MOF) materials as a colorimetric signaling strategy for the sensitive detection of pyrophosphate ion (PPi). The used MOF NH2-MIL-101(Fe) was prepared with Fe3+ ions and fluorescent ligands of 2-amino terephthalic acid (NH2-BDC). The fluorescence of NH2-BDC in MOF is quenched due to the ligand-to-metal charge transfer effect, while the NH2-MIL-101(Fe) suspension shows a strong TE. In the presence of PPi analyte, the MOFs will undergo decomposition because of the competitive binding of Fe3+ by PPi over NH2-BDC, resulting in a significant decrease in the TE signal and fluorescence restoration from the released ligands. The results demonstrate that the new method only requires a laser pointer pen (for TE creation) and a smartphone (for portable quantitative readout) to detect PPi in a linear concentration range of 1.25-800 μM, with a detection limit of ~210 nM (3σ) which is ~38 times lower than that obtained from traditional fluorescence with a spectrophotometer (linear concentration range, 50-800 µM; detection limit, 8.15 µM). Moreover, the acceptable recovery of PPi in several real samples (i.e., pond water, black tea, and human serum and urine) ranges from 97.66 to 119.15%.

Recent Advances in Nanomaterial-Based Chemiluminescence Probes for Biosensing and Imaging of Reactive Oxygen Species

Reactive oxygen species (ROS) play important roles in organisms and are closely related to various physiological and pathological processes. Due to the short lifetime and easy transformation of ROS, the determination of ROS content in biosystem has always been a challenging task. Chemiluminescence (CL) analysis has been widely used in the detection of ROS due to its advantages of high sensitivity, good selectivity and no background signal, among which nanomaterial-related CL probes are rapidly developing. In this review, the roles of nanomaterials in CL systems are summarized, mainly including their roles as catalysts, emitters, and carriers. The nanomaterial-based CL probes for biosensing and bioimaging of ROS developed in the past five years are reviewed. We expect that this review will provide guidance for the design and development of nanomaterial-based CL probes and facilitate the wider application of CL analysis in ROS sensing and imaging in biological systems.

A facile and sensitive fluorescence assay for glucose via hydrogen peroxide based on MOF-Fe catalytic oxidation of TMB

Metal-organic framework (MOF) MOF-Fe nanosols were prepared, which exhibits strongly catalysis of the new fluorescence indicator reaction of 3, 3', 5, 5'-tetramethylbenzidine (TMB)-H₂O₂ to produce the oxidation product TMB_OX. The TMB_OX fluorescent probe has a strong fluorescence peak at 405 nm. After optimizing the various conditions for the determination of H₂O₂ system and glucose system, the linear range of fluorescence determination of H₂O₂ was 0.75-7.5 μM, and the detection limit was 0.3 μM. Since H₂O₂ is the product of glucose oxidase (GOD) catalyzed oxidation of glucose, and a simple and convenient fluorescence method was also established for glucose. The results show that the glucose concentration in the range of 0.2-20 μM has a good correlation with the fluorescence intensity, and the detection limit of glucose was 0.1 μM. This method has been used to detect the content of glucose in drinks with satisfactory results.

Chemiluminescent magnetic nanoparticles with good catalytic activity and rapid separation capability and sensitive sensing for H2O2

It is of considerable importance to develop chemiluminescent functionalized nanomaterials (CF-NMs) with good catalytic activity, high chemiluminescence (CL) efficiency and good stability, and rapid magnetic separation capability, achieving excellent performance in CL biosensing. In this study, N-(4-aminobutyl)-N-ethylisoluminol (ABEI)-functionalized CuFe2O4 magnetic nanomaterial (ABEI/CuFe2O4) with high catalytic activity was synthesized by virtue of a solvothermal and post-functionalization method. ABEI/CuFe2O4 showed outstanding CL properties, superior to ABEI-CuFe2O4 in liquid phase. This reveals that the immobilization of ABEI on the surface of CuFe2O4 exhibits unique heterogeneous catalytic property. The catalytic ability of CuFe2O4 was better than that of CoFe2O4, ZnFe2O4, MnFe2O4, and NiFe2O4. It is suggested that the peroxide-like activity as well as Cu2+ and Cu0 enriched on the surface of ABEI/CuFe2O4 opened up a dual route for synergistic catalysis of H2O2. ABEI/CuFe2O4 also demonstrated good superparamagnetism and magnetic separation could be carried out in 2 min, which is advantageous for the separation and purification of ABEI/CuFe2O4 during the synthetic procedures and bioassays. Owing to the sensitive response of ABEI/CuFe2O4 to H2O2, an enzyme-free sensor was developed for the detection of H2O2 with a wide linear range over 5 orders of magnitude of H2O2 concentrations and a low detection limit of 5.6 nM. The as-developed sensor is sensitive, stable, and convenient. This work provides a new family member of nanomaterials with good magnetism and CL activity as well as good stability. The developed ABEI/CuFe2O4 shows great prospects in biocatalysis, bioassays, biosensing, and bioimaging, etc.

Horseradish peroxidase-repeat assay based on tyramine signal amplification for highly sensitive H2O2 detection by surface-enhanced Raman scattering

A new and simple surface-enhanced Raman scattering (SERS) biosensor based on the tyramine signal amplification (TSA)-triggered formation of horseradish peroxidase (HRP) repeats on a gold sensing chip was designed for the highly sensitive detection of hydrogen peroxide (H₂O₂). Initially, gold wafers were functionalized with HRP as sensing chips. Then, the HRP immobilized on the chips triggers the TSA reaction to transform the tyramine-HRP conjugate into a tyramine-HRP repeat array. With the aid of the target H₂O₂, the HRP repeats catalyze the oxidation of o-phenylenediamine (OPD) and produce an enzyme catalytic product with a different chemical structure, thus altering the fingerprint of the SERS spectra from that of OPD. H₂O₂ can be quantitatively analyzed according to the change in SERS signal intensity. On the basis of the TSA strategy, the proposed method allows the detection of H₂O₂ with a limit of detection (LOD) of 0.8 × 10^-8 M. The as-prepared SERS sensor can achieve high-sensitivity H₂O₂ detection with a small amount of sample for each analysis. Therefore, this sensor exhibits significant potential for application in bioanalysis.

MIL-101(Cr), an Efficient Heterogeneous Catalyst for One Pot Synthesis of 2,4,5-tri Substituted Imidazoles under Solvent Free Conditions

A chromium-containing metal-organic framework (MOF), MIL-101 (Chromium(III) benzene-1,4-dicarboxylate), was used to catalyze the one pot, three component synthesis of some 2,4,5-trisubstituted imidazoles under solvent-free conditions. The advantages of using this heterogeneous catalyst include short reaction time, high yields, easy and quick isolation of catalyst and products, low amount of catalyst needed, and that the addition of solvent, salt, and additives are not needed. This catalyst is highly efficient and can be recovered at least 5 times with a slight loss of efficiency. The structure of the metal-organic frameworks (MOF) was confirmed by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (HNMR) were performed to confirm some of the synthesized products. Experimental data indicated that the optimum amount of catalyst was 5 mg for benzil (1 mmol), 4-chlorobenzaldehyde (1 mmol), and ammonium acetate (2.5 mmol), and the synthetic route to the various imidazoles is performed in 10 min by 95% yield, an acceptable result rivalling those of other catalysts.

Novel cobalt-based metal-organic frameworks with superior catalytic performance on N-(4-aminobutyl)-N-ethylisoluminol chemiluminescent reaction

Novel cobalt-based metal-organic frameworks (Co MOFs) were synthesized by a facile "controlled synthesis" strategy. The MOFs displayed superior catalytic performance on the chemiluminescent (CL) reaction between N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and H₂O₂. UV-vis absorption, CL spectrum, ESR, and radical scavenger experiments were conducted for clarifying the catalytic mechanism of Co MOFs. All results revealed that Co MOFs can accelerate decomposition of H₂O₂ and production of OH^•, O₂^•-as well as ¹O₂ radicals. The rapid reaction between these reactive oxygen species and ABEI resulted in the generation of ABEI-ox∗. The excited-state oxidation product emitted a very intensive CL signal with a maximal emission wavelength of 430 nm as it returned to the ground state. To explore their application potential in CL assay, Co MOFs were used as powerful CL reaction catalyst for establishing a very sensitive method for immunoassay of aflatoxin B₁. The detection range was 0.05-60 ng mL^-1, and the limit of detection was 4.3 pg mL^-1. The result for detecting herbal medicine samples demonstrates the acceptable reliability of the Co MOFs-based CL immunoassay. The proof-of-principle work verifies the application potential of Co MOFs on boosting intensive CL signal, and meets the demand for high sensitivity in various bioassay fields.

Nanomaterial-enhanced chemiluminescence reactions and their applications

Chemiluminescence (CL) analysis is a trace analytical method that possesses advantages including high sensitivity, wide linear range, easy operation, and simple instruments. With the development of nanotechnology, many nanomaterial (NM)-enhanced CL systems have been established in recent years and applied for the CL detection of metal ions, anions, small molecules, tumor markers, sequence-specific DNA, and RNA. This review summarizes the research progress of the nanomaterial-enhanced CL systems the past five years. These CL reactions include luminol, peroxyoxalate, lucigenin, ultraweak CL reactions, and so on. The CL mechanisms of the nanomaterial-enhanced CL systems are discussed in the first section. Nanomaterials take part in the CL reactions as the catalyst, CL emitter, energy acceptor, and reductant. Their applications are summarized in the second section. Finally, the challenges and opportunities are discussed.

An Integrated Chemiluminescence Microreactor for Ultrastrong and Long-Lasting Light Emission

A porous metal-organic framework [Ba(H2 LLOMe 2- )·DMF·H2O]·2DMF (UPC-2) (H4 LLOMe = 4',4'''-(2,3,6,7-tetramethoxyanthracene-9,10-diyl)bis([1,1'-biphenyl]-3,5-dicarbo-xylic acid N,N-Dimethylformamide [DMF]), which can act as an excellent chemiluminescence microreactor, is designed and constructed. In the framework of UPC-2, the catalytic Ba cluster and electron-rich anthracene fluorescent centers are fixed and interconnected in an orderly fashion, and this can shorten the energy transfer path and weaken the relaxation of the chemiluminescence process. Meanwhile, the rhombic channels of UPC-2 can provide a proper diffusion ratio of reactants to support a stable and continuous energy supply. The UPC-2 chemiluminescence microreactor exhibits an ultrastrong and long-lasting light emission, which possesses potential application in emergency lights and biological mapping. The concept of the chemiluminescence microreactor and its construction using a metal-organic framework as a platform will promote further research in the design and fabrication of functional MOFs for chemiluminescence applications.

Intensive and Persistent Chemiluminescence System Based on Nano-/Bioenzymes with Local Tandem Catalysis and Surface Diffusion

A chemiluminescence (CL) system with long persistent and intensive emission is essential for accurate CL quantitative analysis and imaging assay. However, with most known CL systems being flash-type, it is still a great challenge to develop long-lasting CL systems. Here, by combining an iron porphyrin metal-organic frameworks (FePorMOFs) based peroxidase mimic with natural glucose oxidase (GOx), an intensive and persistent CL system is presented on the basis of local tandem catalysis and surface diffusion of the nano-/bioenzymes (FePorMOF/GOx). FePorMOF synthesized by iron porphyrin linker and zirconium ion node possesses high peroxidase catalytic activity and stability. Using luminol and glucose as substrate, the FePorMOF/GOx CL system can produce intensive CL emission containing a plateau period of 7.5 h. The strong CL signal is due to the local tandem generation and reaction of H₂O₂ by GOx and FePorMOF, which avoids the diffusion-limited kinetics and leads to a high catalytic efficiency of the nano-/bioenzymes. On the other hand, the long persistent CL emission is attributed mainly to the enzymatic reaction-controlled H₂O₂ supply and surface diffusion-controlled CL reaction. The proposed CL system is explored for CL imaging sensing of glucose and homogeneous immunoassay of α-fetoprotein. The nano-/bioenzymes CL system exhibits intensive and long constant CL emission in physiological condition, showing promising applications in real-time bioassay and bioimaging.

One-pot synthesis of luminol–gallium nanoassemblies and their peroxidase-mimetic activity for colorimetric detection of pyrophosphate

Luminol–Ga nanoassemblies exhibit peroxidase-mimetic activity. Colorimetric detection of PPi is developed owing to the formation of a complex between PPi and Ga³⁺.

Spectrophotometric determination of trace hydrogen peroxide via the oxidative coloration of DPD using a Fenton system

A low-cost and environmentally-friendly spectrophotometric method for hydrogen peroxide (H₂O₂) determination based on the oxidative coloration reaction of N,N'-diethyl-p-phenylenediamine (DPD) via the Fenton reactions in aqueous water was established. The generated pink radical cation (DPD⁺) showed maximum absorption at 551 nm. Importantly, under the optimal conditions (pH 3.0, 20 mM DPD, 1.5 mM Fe(II) and reaction time of 45 s), the increase in absorbance at 551 nm for DPD⁺ generation was linear with respect to the addition of H₂O₂ (0-12 μM). The sensitivity and the detection limit of the proposed Fenton-DPD method for H₂O₂ determination at 551 nm were (2.55 ± 0.01) × 10⁴ M^-1 cm^-1 and 0.05 μM, respectively. The stoichiometric factor for the reaction of H₂O₂ with DPD was 1:1.18. The absorbance of the generated DPD⁺ was found to be stable in different types of water within 20 min. Moreover, the proposed Fenton-DPD method could be used for the analysis of the trace H₂O₂ in rainwater and determine the rate constants that involved H₂O₂ with high accuracy.

A dual-responsive luminescent metal–organic framework as a recyclable luminescent probe for the highly effective detection of pyrophosphate and nitrofurantoin

Luminescent ZTMOF-1 can discriminately detect PPi and NFT with high selectivity, sensitivity and stability.

Improved peroxidase mimetic activity of a mixture of WS2 nanosheets and silver nanoclusters for chemiluminescent quantification of H2O2 and glucose

It is reported that a mixture of WS₂ nanosheets (WS₂ NS) and silver nanoclusters (AgNCs) displays strongly enhanced peroxidase-mimicking activity. The catalytic effect of the mixture was studied by colorimetry, fluorometry, chemiluminescence (CL) and electrochemistry. The effect is interpreted in terms of a difference between the Fermi energy level of the two nanomaterials. This leads to the formation of charge separation regions which act as active sites for enzyme mimetic interaction with the substrates. The mixture of WS₂ NS and AgNCs was exploited for the non-enzymatic determination of H₂O₂ and glucose. A stopped-flow method was applied as a sensitive CL detection system using the bicarbonate-H₂O₂ reaction. The mixture has a powerful peroxidase mimicking activity on the bicarbonate-H₂O₂ CL reaction, and this effect is much larger than that of any single constituent. In addition, the CL emission is improved several times by using the stopped-flow technique. Under optimum condition, H₂O₂ can be determined in the 2.5-1500 nM concentration range. Moreover, glucose levels in human serum can be quantified via glucose oxidase based oxidation which leads to the generation of H₂O₂. Using this CL assay, a linear relationship was obtained between the intensity of the CL emission and glucose concentration in the range of 0.03-20 μM, with a limit of detection (3S) of 13 nM. Graphical abstract An enhanced peroxidase-like catalytic activity for WS₂ nanosheets (WS₂ NS) was revealed in the presence of silver nanoclusters (AgNCs), and was exploited for the non-enzymatic determination of H₂O₂, and of glucose (via glucose oxidase; GOx) using a stopped-flow CL method.

A water-stable lanthanide metal-organic framework for fluorimetric detection of ferric ions and tryptophan

The preparation of a highly water stable and porous lanthanide metal-organic framework (MOF) nanoparticles (denoted SUMOF-7II; SU refers to Stockholm University) is described. SUMOF-7II was synthesized starting from the tritopic linker of 2,4,6-tri-p-carboxyphenyl pyridine (H3L2) and La(III) as metal clusters. SUMOF-7II forms a stable dispersion and displays high fluorescence emission with small variation over the pH range of 6 to 12. Its fluorescence is selectively quenched by Fe(III) ions compared to other metal ions. The intensity of the fluorescene emission drops drops linearly in 16.6-167 μM Fe(III) concentration range, and Stern-Volmer plots are linear. The limit of detection (LOD) is 16.6 μM (at an S/N ratio of >3). This indicator probe can also be used for selective detection of tryptophan among several amino acids. Compared to the free linker H3L2, SUMOF-7II offers improved sensitivity and selectivity of the investigated species. Graphical abstractA water-stable porous lanthanide metal-organic framework SUMOF-7II (La) has shown to be an excellent probe for the detection of ferric ions among other metal ions, and tryptophan among other amino acids in aqueous solution. The new probe displays high and stable fluorescence signal in a wide pH range (6-12).