In situ synthesis of the imine-based covalent organic framework LZU1 on the inner walls of capillaries for electrochromatographic separation of nonsteroidal drugs and amino acids

Chiral-induced synthesis of chiral covalent organic frameworks core-shell microspheres for HPLC enantioseparation

Two chiral covalent organic frameworks (CCOFs) core-shell microspheres based on achiral organic precursors by chiral-induced synthesis strategy for HPLC enantioseparation are reported for the first time. Using n-hexane/isopropanol as mobile phase, various kinds of racemates were selected as analytes and separated on the CCOF-TpPa-1@SiO2 and CCOF-TpBD@SiO2-packed columns with a low column backpressure (3 ~ 9 bar). The fabricated two CCOFs@SiO2 chiral columns exhibited good separation performance towards various racemates with high column efficiency (e.g., 19,500 plates m-1 for (4-fluorophenyl)ethanol and 18,900 plates m-1 for 1-(4-chlorophenyl)ethanol) and good reproducibility. Some effects have been investigated such as the analyte mass and column temperature on the HPLC enantioseparation. Moreover, the chiral separation results of the CCOF-TpPa-1@SiO2 chiral column and the commercialized Chiralpak AD-H column show a good complementarity. This study demonstrates that the usage of chiral-induced synthesis strategy for preparing CCOFs core-shell microspheres as a novel stationary phase has a good application potential in HPLC.

Covalent organic frameworks: spotlight on applications in the pharmaceutical arena

Covalent organic frameworks (COFs) have much potential in the field of analytical separation research due to their distinctive characteristics, including easy modification, low densities, large specific surface areas and permanent porosity. This article provides a historical overview of the synthesis and broad perspectives on the applications of COFs. The use of COF-based membranes in gas separation, water treatment (desalination, heavy metals and dye removal), membrane filtration, photoconduction, sensing and fuel cells is also covered. However, these COFs also demonstrate great promise as solid-phase extraction sorbents and solid-phase microextraction coatings. In addition to various separation applications, this work aims to highlight important advancements in the synthesis of COFs for chiral and isomeric compounds.

General Two-Step Method for the Fabrication of Covalent-Organic Framework-Bound Open-Tubular Capillary Columns for High-Resolution Gas Chromatography Separation of Isomers

Covalent organic frameworks (COFs) are promising as stationary phases for gas chromatography (GC). The successful anchoring of COFs to the inner walls of the capillary with good uniformity is an important prerequisite to ensure the excellent separation performance of columns. However, current methods for the fabrication of COF-based capillary columns cannot always meet this requirement when faced with different COFs, which hampers the further development of COF-based GC stationary phases. Here, we show a general two-step method for the fabrication of COF-bound capillary column. The first step enables the formation of uniform amorphous polymer layer on the inner walls of capillary, while the second step allows the facile transformation of the amorphous polymer layer into a highly crystalline COF layer. COF-bound capillary columns with different framework structures were fabricated successfully by the developed two-step method. Impressively, the COF layers bound on the inner walls of these capillary columns showed good uniformity and high crystallinity. More importantly, as an example, the fabricated Tab-DHTA-bound capillary column showed good resolution (R > 1.5) and high column efficiency (700-39,663 plates m-1) for the tested isomers of ethylbenzene, xylene, dichlorobenzene, chlorotoluene, pinene, 1,3-dichloropropene, and propylbenzene with good precision (RSD, run-to-run, n = 5) (retention time, 0.2-0.6%; peak area, 0.5-1.1%; and peak height, 0.5-1.4%). In general, the fabricated Tab-DHTA-bound capillary column exhibited better performance for the separation isomers than commercial columns DB-5 and HP-FFAP. These results indicate that the two-step method is an efficient way to fabricate the COF-bound capillary column with excellent separation performance.

Chiral covalent organic framework-based open tubular capillary electrochromatography column for enantioseparation of selected amino acids and pesticides

A novel chiral covalent organic framework (CCOF) was synthesized with an imine covalent organic framework TpBD (synthesized via Schiff-base reaction between phloroglucinol (Tp) and benzidine (BD)) modified using (1S)-(+)-10-camphorsulfonyl chloride as chiral ligand by chemical bonding method for the first time, and was characterized by X-ray diffraction, Fourier-transform infrared spectra, X-ray photoelectron spectroscopy, nitrogen adsorption/desorption, thermogravimetry analysis, and zeta-potential. The results revealed that the CCOF had good crystallinity, high specific surface area and good thermal stability. Then, the CCOF was employed as stationary phase in open-tubular capillary electrochromatography (OT-CEC) column (the CCOF-bonded OT-CEC column) for enantioseparation of 21 single chiral compounds (12 natural amino acids including acidic, neutral and basic, 9 pesticides including herbicides, insecticides and fungicides) and simultaneous enantioseparation of mixture amino acids and pesticides with similar structures or properties. Under the optimized CEC conditions, all the analytes reached the baseline separation with high resolutions of 1.67-25.93 and selectivity factors of 1.06-3.49 in 8 min. Finally, the reproducibility and stability of the CCOF-bonded OT-CEC column were measured. Relative standard deviations (RSDs) of retention time and separation efficiency were 0.58-4.57% and 1.85-4.98%, and not obviously changed after 150 runs. These results demonstrate that COFs-modified OT-CEC explore a promising method to separate chiral compounds.

Determination of water in organic solvents and raw food products by fluorescence quenching of a crystalline vinyl-functionalized COF

Covalent organic frameworks (COFs) with good chemical stability, flexible chemical functionalization, tunable pore sizes, and high specific surface areas have been increasingly employed in the field of fluorescence sensing. In this work, a crystalline vinyl-functionalized COF TzDa-V was facilely prepared through a room-temperature synthetic method via condensation reaction between 4,4',4″-(1,3,5-triazine-2,4,6-triyl)trianiline (Tz) and 2,5-diallyloxyterephthalaldehyde (Da-V). The intermolecular charge transfer (ICT) effect endowed the TzDa-V with fluorescence characteristic, and it was sensitive to trace water and can be quenched due to the disruption of ICT process by water. On this base, the prepared COF TzDa-V with excellent chemical/thermal stability was applied to sensing of trace water in common organic solvents such as DMF, acetone, THF, and ethyl acetate with rapid response (less than 10 s), satisfactory sensing range (0.5-18% water in DMF, 0.5-15% water in acetone, 0.5-16% water in THF, 0.5-5% in ethyl acetate, v/v), and high sensitivity. The limits of detection for water in DMF, acetone, THF, and ethyl acetate were 0.0497%, 0.0590%, 0.0502%, and 0.0766% (v/v), respectively. The proposed probe was successfully used for the detection of trace water in food products such as salt and sugar. The COF TzDa-V would be a good candidate for application in water sensing.

β-Cyclodextrin covalent organic framework supported by polydopamine as stationary phases for electrochromatographic enantioseparation

In this work, a new open-tubular capillary electrochromatography (OT-CEC) column was prepared using β-cyclodextrin covalent organic framework (β-CD COF) as a stationary phase. Polydopamine was used to assist fabrication of β-CD COF on an inner wall of a fused-silica capillary. The coating layer on the capillary was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Electroosmotic flow (EOF) was also studied to evaluate the variation of the inner wall of immobilized columns. Furthermore, the chiral separation effectiveness of the fabricated capillary column was evaluated by CEC using enantiomers of several related proton pump inhibitors as model analytes, including omeprazole, lansoprazole, pantoprazole and tenatoprazole. The effects of bonding time and concentration of β-CD COF, the type, concentration and pH of buffer, applied voltage were investigated to obtain satisfactory enantioselectivity. In the optimum conditions, the enantiomers of four analytes were resolved within 15 min with resolutions of 1.63-2.62. The relative standard deviation values for migration times and resolutions of the analytes representing intraday and interday were less than 6.75% and 4.24%, respectively. The results reveal that β-CD COF has great potential as chiral-stationary phases for enantioseparation in CEC.

In situ synthesis of a spherical covalent organic framework as a stationary phase for capillary electrochromatography

Covalent organic frameworks (COFs) are a novel type of crystalline porous organic polymer materials recently developed. It has several advantages in chromatographic separation field, such as high thermal stability, porosity, structural regularity, and large specific surface area. Here, a novel spherical COF 1,3,5-tris(4-aminophenyl)benzene (TAPB) and 2,5-bis(2-propyn-1-yloxy)-1,4-benzenedicarboxaldehyde (BPTA) was developed as an electrochromatographic stationary phase for capillary electrochromatography separation. The COF TAPB-BPTA modified capillary column was fabricated via a facile in situ growth method at room temperature. The characterization results of scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, and X-ray diffraction (XRD) confirmed that COF TAPB-BPTA were successfully modified onto the capillary inner surface. The electrochromatography separation performance of the COF TAPB-BPTA modified capillary was investigated. The prepared column demonstrated outstanding separation performance toward alkylbenzenes, phenols, and chlorobenzenes compounds. Furthermore, the baseline separations of non-steroidal anti-inflammatory drugs (NSAIDs) and parabens with good efficiency and high resolution were achieved. Also, the prepared column possessed satisfactory precision of the intra-day runs (n = 5), inter-day runs (n = 3), and parallel columns (n = 3), and the relative standard deviations (RSDs) of the retention times of tested alkylbenzenes were all less than 2.58%. Thus, this new COF-based stationary phase shows tremendous application potential in chromatographic separation field.

•

COF TAPB–BPTA was studied as OT-CEC stationary phase.

•

In situ, room-temperature growth method was quite facile and efficient.

•

Excellent separation performances toward various hydrophobic compounds.

•

The maximum column efficiency was 1.78 × 10⁵ plates/m.

•

Reproducibility and stability were found to be satisfactory.

Covalent Organic Frameworks-Based Membranes as Promising Modalities from Preparation to Separation Applications: An Overview

Covalent organic frameworks (COFs) are a promising class of porous crystalline materials made up of covalently connected and periodically protracted network topologies through organic linkers. The tailorability of organic linker and intrinsic structures endow COFs with a tunable porosity and structure, low density, facilely-tailored functionality, and large surface area, attracting increasing amount of interests in variety of research areas of membrane separations. COF-based membranes have spawned a slew of new research projects, ranging from fabrication methodologies to separation applications. Herein, we tried to emphasis the major developments in the synthetic approaches of COFs based membranes for a variety of separation applications such as, separation of gaseous mixtures, water treatment as well as separation of isomeric and chiral organic compounds. The proposed methods for fabricating COF-based continuous membranes and columns for real world applications are also thoroughly explored. Finally, a viewpoint on the future directions and remaining challenges for COF research in the area of separation is provided.

Open Tubular Column Immobilized with Covalent Organic Frameworks for Rapid Separation of Small Molecular Compounds by Capillary Electrochromatography

Preparation of a novel TpBD (synthesized from phloroglucinol and benzidine) covalent organic framework (COF) immobilized open-tubular (OT) capillary is described by in situ growth strategy. The stationary phase in the column was characterized by Fourier transform infrared (FTIR) spectra, X-ray diffraction (XRD), thermogravimetric analysis (TGA), nitrogen adsorption–desorption isotherms, scanning electron microscope (SEM), transmission electron microscopy (TEM) and energy-dispersive X-ray spectrum (EDS). Several families of compounds with different properties (alkylbenzenes, parabens, sulfonamides and benzoic acids) were selected to evaluate the performance of the TpBD COF immobilized capillary. The results showed that the stationary phase was uniform with about 6.0 μm thickness under the optimal preparation conditions, and the relative standard deviations (RSDs) were no more than 3.13% of alkylbenzenes on the TpBD COF immobilized capillary for 11 consecutive runs, which exhibited its excellent reproducibility and stability. A rapid baseline separation of each family of the analytes (neutral parabens, amphoteric sulfonamides and acidic benzoic acids) was obtained in less than 6 min with a resolution (Rs) of 2.79~9.30, which sufficiently verified the rapid separation, high resolution and wide application range of the TpBD COF immobilized capillary, and further revealed this strategy of fabricating COF to capillary column to show great promise in capillary electrochromatography.

Synthesis of a covalent organic framework with hydrazine linkages and its application in open-tubular capillary electrochromatography

Recently, covalent organic frameworks (COFs), owning to their excellent and unique properties, are attracting the attention of numerous researchers in some areas, especially the domain of chromatographic separation. However, the application of hydrazine linkages COFs in open-tubular capillary electrochromatography (OT-CEC) lies in the early stage at present. Herein, a well-crystallized hydrazine-linked COF (Tf-DHzOH) was synthesized successfully from 2,5-dihydroxyterephtalohydrazide and 1,3,5-triformyl-benzene. Tf-DHzOH was firstly regarded as a stationary phase material to prepare the Tf-DHzOH coated capillaries with different coating thickness by covalent bonding in this work. The characterization results showed that Tf-DHzOH was successfully synthesized. The separation performance and stability of the Tf-DHzOH coated capillary were evaluated by considering amino acids, sulfonamides, tetracyclines and benzene compounds as analytes. The relative standard deviations (RSDs) of separation time in the intra-day (n = 9), inter-day (n = 6), column-to-column (n = 3) and batch-to-batch (n = 3) were 0.76-4.97%, 1.59-5.94%1.78-8.72% and 1.66%-8.23%, respectively, the RSDs of peak areas were 1.90-5.16%, 1.73-5.24%, 1.26-7.33% and 3.77%-11.24%, respectively. It was confirmed that there was no visible change of separation efficiency after the Tf-DHzOH-coated capillary was used more than 200 runs. The results make clear that 2D hydrazine-linked COF (Tf-DHzOH) has superior potential as the stationary phase in OT-CEC for chromatographic separation.

Recent progress in the development of chiral stationary phases for high-performance liquid chromatography

Separations and analyses of chiral compounds are important in many fields, including pharmaceutical production, preparation of chemical intermediates, and biochemistry. High-performance liquid chromatography using a chiral stationary phase is regarded as one of the most valuable methods for enantiomeric separation and analysis because it is highly efficient, is broadly applicable, and has powerful separation capability. The focus for development of this method is the identification of novel chiral stationary phases with superior recognition performance and good stability. The present article reviews recent progress in the development of new chiral stationary phases for high-performance liquid chromatography between January 2018 and June 2021. These newly reported chiral stationary phases are divided into three categories: small organic molecule-based (cyclodextrin and its derivatives, macrocyclic antibiotics, cinchona alkaloids, and other low molecular weight chiral molecules), macromolecule-based (cellulose and amylose derivatives, chitin and chitosan derivatives, and synthetic helical polymers) and chiral porous material-based (chiral metal-organic frameworks, chiral covalent organic frameworks, and chiral inorganic mesoporous silicas). Each type of chiral stationary phase is discussed in detail.

Hollow tube covalent organic framework for syringe filter-based extraction of ultraviolet stabilizer in food contact materials

In this work, a novel hollow tube covalent organic framework constructed by cyclotricatechylene and tetrafluoroterephthalonitrile (CTC-TFPN-COF) with polyether bond was synthesized, and it was coated on filter membrane for extraction of ultraviolet stabilizer in migration from food contact materials. Since the monomers of the polymer were linked by polyether bond, the CTC-TFPN-COF exhibited strong chemical stability in severe conditions such as acid, alkali and various organic solvent. The excellent features of high porosity and robust structure endowed the CTC-TFPN-COF good candidate as adsorbent for extraction of ultraviolet stabilizer. Moreover, the CTC-TFPN-COF coated membranes were immobilized on syringe filter and coupled with multiple channel injection pump to realize high throughput sample pretreatment strategy. Subsequently, a sensitive analytical method for ultraviolet stabilizer was established followed by ultra-high performance liquid chromatography-tandem mass spectrometry. The flow rate of extraction and desorption, elution solvent and the volume of desorption solvent were optimized. The method was assessed, which showed wide linear ranges with R2 greater than 0.99, low limits of detection (0.9-91 ng L^-1) and low limits of quantification (3-300 ng L^-1). The developed method was successfully applied to determine trace ultraviolet stabilizer in the migration of food contact materials with different simulated solution, which demonstrated its promising potential in practical analysis.

Room-temperature growth of covalent organic frameworks as the stationary phase for open-tubular capillary electrochromatography

Covalent organic frameworks (COFs) are a class of porous materials with high surface area, high porosity, good stability and tunable structure that have been widely used in the separation area. In this work, we have proposed the in situ synthesis of a novel COF composed of 4,4',4''-(1,3,5-triazine-2,4,6-triyl)trianiline (Tz) and 1,4-dihydroxyterephthalaldehyde (Da) onto the capillary inner surface for electrochromatographic separation. Fourier transform infrared (FT-IR) spectroscopy, elemental analysis (EA) and scanning electron microscopy (SEM) have facilitated the characterization of the prepared capillary columns. The COF (TzDa) modified OT-CEC column exhibited satisfactory separation selectivity towards neutral compounds (such as chlorobenzenes and alkylbenzenes), acidic and basic compounds (such as phenols and anilines), food additives (vanillin and its analogues) and small biomolecules (such as amino acids and polypeptides). Furthermore, the TzDa modified capillary was quite stable and reproducible. The relative standard deviations for retention times of the test analytes (alkylbenzenes) were as follows: for intra-day (n = 3) runs (≤1.74%), inter-day (n = 3) runs (≤2.25%) and between columns (n = 3) (≤4.83%). This new type of COF-based stationary phase has tremendous potential in separation science.

Chiral covalent organic framework core-shell composite CTpBD@SiO2 used as stationary phase for HPLC enantioseparation

The fascinating framework structures and unique properties of chiral covalent organic frameworks (COFs) make them promising candidates as novel separation medium for high-performance liquid chromatography (HPLC). However, the irregular morphology, inhomogeneous particle size, and low density of conventional COF particles will lead to a low column efficiency, undesirable chromatographic peak shape, and high column backpressure of such COF-packed columns. In this work, a chiral COF CTpBD was synthesized by the Schiff base reaction between benzidine (BD) and chiral organic monomer CTp obtained through the reaction of 1,3,5-triformylphoroglucinol (Tp) and (+)-diacetyl-L-tartaric anhydride ((+)-Ac-L-Ta). The chiral COF CTpBD was immobilized on the surface of amino functionalized silica (SiO₂-NH₂) by an in situ growth approach to prepare the chiral COF core-shell microsphere composite CTpBD@SiO₂, which was used as a novel chiral stationary phase (CSP) for HPLC enantioseparation. Various kinds of racemates were separated on the CTpBD@SiO₂-packed column with a low column backpressure (8-11 bar). Some effects such as the analyte mass and column temperature on the HPLC enantioseparation have been studied in detail. The fabricated CTpBD@SiO₂-packed column exhibited high column efficiency (e.g., 16,800 plates m^-1 for atenolol), high enantioselectivity, and good reproducibility toward various racemates. The highest resolution value, retention factor, and separation factor reach to 2.11, 2.85, and 3.73, respectively. The relative standard deviations (RSD) of peak area, peak height, half-peak width, and retention time of atenolol were all below 3.0%.

In situ room-temperature preparation of a covalent organic framework as stationary phase for high-efficiency capillary electrochromatographic separation

Covalent organic frameworks (COFs), considered as a series of newly emerging porous organic materials, have been widely utilized in separation fields. Herein, a novel COF (TFPB-BD) was first employed as stationary phase for high-efficiency capillary electrochromatographic separation. Benzidine (BD) and 1,3,5-Tris-(4-formylphenyl)benzene (TFPB) were selected as organic linkers and then introduced into the aldehyde group modified capillary for the in situ growth of TFPB-BD onto the capillary inner wall at room temperature. The morphology and formation of TFPB coated capillary column were confirmed by a variety of tools including Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). It's interesting that the TFPB globular crystals with nanoscale were uniformly and densely modified on the capillary inner surface. Hence, the prepared column exhibited prominent separation performance for the test analytes including alkylbenzenes, chlorobenzenes and phenolic compounds with high efficiency and high resolution. The maximum column efficiency can reach about 1.8 × 10⁵ plates•m^-1. Additionally, the high resolutions of anilines, amino acids and parabens were also achieved on the TFPB modified capillary. The precisions (RSDs) of the retention times of alkylbenzenes of intra-day runs (n = 3), inter-day runs (n = 3) and parallel columns (n = 3) were all less than 2.83%. This innovative COF-based stationary phase gives great promise for the chromatographic separation field.

Facile synthesis and immobilization of functionalized covalent organic framework-1 for electrochromatographic separation

Inspired by the outstanding functions of 3-aminopropyltriethoxysilane (APTES), which can be used for functionalization of both covalent organic frameworks (COFs) and substrate surfaces, herein, a proof-of-concept demonstration was carried out by one-step synthesis and immobilization of COF-1 in capillary. COF-1 was grown on the inner wall of capillary using APTES, which played a triple role of catalyst, stabilizer, and connecting arm during the process. The immobilization of COF-1 on silicon surface was confirmed by scanning electron microscopy. Moreover, COF-1 modified capillary (COF-1@capillary) column exhibited excellent performance in the electrochromatographic separation of amino acids. High resolution and separation efficiency (225,378 plates/m for 4-methylbiphenyl) were successfully achieved. Separation of methylbenzene, styrene, ethylbenzene, chlorobenzene, 1,2-dichlorobenzene, 1,2,4-trichlorobenzene, 4-methylbiphenyl, naphthalene, and 4-vinylbipheny in the electro-driven mode confirmed the successful growth of COF-1 on the inner wall of capillary. The developed facile method for the immobilization of COF-1 may pave the way for further application prospects of boron-based COFs.

Facile preparation of ethanediamine-β-cyclodextrin modified capillary column for electrochromatographic enantioseparation of Dansyl amino acids

Herein, the fabrication of a fascinating multifunctional cyclodextrin (CD) chiral stationary phase and its chiral separation performance in capillary electrochromatography are proposed. A facile interfacial polymerization was used to anchor ethanediamine-β-cyclodextrin (EDA-β-CD) polymerized with trimesoyl chloride (TMC) and to form the chiral stationary phase (CSP) composite onto the surface wall of the capillary. The characters of prepared columns were confirmed by Fourier transform infrared spectroscopy (FT-IR), X-ray Photoelectron Spectrometer (XPS), scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). This novel CSP offers multi-typical interactions including hydrogen bonding, π-interaction, hydrophobic and electrostatic interaction as well as steric effects which contribute to prominent chiral recognition for Dansyl-DL-amino acids in CEC modes. The EDA-β-CD modified column showed eminent enantioseparation performance towards five Dansyl-DL-amino acids (the DL-forms of valine, threonine, leucine, phenylalanine, serine). Besides, the prepared columns were perfectly reproducible and stable. The relative standard deviations of the enantiomer retention times for intra-day (n = 5), inter-day (n = 3) runs and column-to-columns (n = 3) are below 0.54%, 1.35% and 4.89%, individually. This innovative chiral stationary phase shows a broader application view and scope in chiral recognition domain.

Chiral Recognition for Chromatography and Membrane-Based Separations: Recent Developments and Future Prospects

With the rapid development of global industry and increasingly frequent product circulation, the separation and detection of chiral drugs/pesticides are becoming increasingly important. The chiral nature of substances can result in harm to the human body, and the selective endocrine-disrupting effect of drug enantiomers is caused by differential enantiospecific binding to receptors. This review is devoted to the specific recognition and resolution of chiral molecules by chromatography and membrane-based enantioseparation techniques. Chromatographic enantiomer separations with chiral stationary phase (CSP)-based columns and membrane-based enantiomer filtration are detailed. In addition, the unique properties of these chiral resolution methods have been summarized for practical applications in the chemistry, environment, biology, medicine, and food industries. We further discussed the recognition mechanism in analytical enantioseparations and analyzed recent developments and future prospects of chromatographic and membrane-based enantioseparations.

In situ controllable synthesis of Schiff base networks porous polymer coatings for open-tubular capillary electrochromatography

A uniform Schiff base network (SNW) film was synthesized in situ in a controllable way through continuous flow of reactants inside the capillary. The properties and application of the as-prepared capillary was investigated in capillary electrochromatography. The effects of reaction monomer concentration and reaction time on coating thickness were studied by SEM. The results show that the reaction condition has a significant influence on the morphology and thickness of the SNW films. The thickness of the film can be controlled by changing the concentration of reaction solution and reaction time. Capillaries coated under different conditions were employed to separate four nucleotides by capillary electrochromatography, which demonstrated significant variation of migration time, peak order, and separation efficiency. Analytes containing nitrogen heterocycle structures, such as nucleotides, methylimidazole isomers, and β-lactam antibiotics, were successfully separated with the prepared open-tubular columns. Under the selected separation conditions, theoretical plate number of four nucleotides is in a range 45,237-104,505 plates·m^-1, and the resolutions are 1.98-8.07. A resolution of 1.75 is obtained for methylimidazole isomers. The nucleotides in a real sample, chicken essence seasoning, were determined using the prepared capillary column with satisfactory recoveries in the range 95 to 105%.

Covalent Organic Frameworks in Sample Preparation

Covalent organic frameworks (COFs) can be classified as emerging porous crystalline polymers with extremely high porosity and surface area size, and good thermal stability. These properties have awakened the interests of many areas, opening new horizons of research and applications. In the Analytical Chemistry field, COFs have found an important application in sample preparation approaches since their inherent properties clearly match, in a good number of cases, with the ideal characteristics of any extraction or clean-up sorbent. The review article is meant to provide a detailed overview of the different COFs that have been used up to now for sample preparation (i.e., solid-phase extraction in its most relevant operational modes-conventional, dispersive, magnetic/solid-phase microextraction and stir-bar sorptive extraction); the extraction devices/formats in which they have been applied; and their performances and suitability for this task.

β-Cyclodextrin covalent organic framework-modified organic polymer monolith as a stationary phase for combined hydrophilic and hydrophobic aqueous capillary electrochromatographic separation of small molecules

A β-Cyclodextrin covalent organic framework (β-CD COF) was successfully prepared under ambient temperature with a mild chemistry strategy from heptakis(6-amino-6-deoxy)-β-cyclodextrin and terephthalaldehyde. It was embedded into the poly[(glycidyl methacrylate)-co-(ethylene dimethacrylate)] [poly(GMA-co-EDMA)] monolith and served as the β-CD COF material-incorporated monolith. The synthetic materials were characterized by field emission scanning electron microscopy, energy-dispersive X-ray mapping analysis, transmission electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, and N₂ adsorption-desorption isotherm. The β-CD COF material-incorporated monolith achieved baseline separation in capillary electrochromatographic separation of three amides, three amino acids, three nucleosides, four aromatic acids, and three positional isomers (with resolution values of three amides, 1.75 and 1.54; three amino acids, 5.24 and 1.75; three nucleosides, 2.56 and 1.77; four aromatic acids, 6.96, 2.74, and 1.64; three positional isomers, 1.61 and 1.50). In comparison with the original monolith, the β-CD COF material-incorporated monolith shows significantly enhanced resolution for mixed molecules. The effect of pH and concentration of buffer and applied voltage were discussed in detail. The fabricated monolith showed good stability and reproducibility (relative standard deviation (RSD) < 6.9%). Molecular modeling illuminated the interactions between the small molecules and stationary phase, and provided a sufficient theoretical basis for experimental data. Graphical abstract Schematic presentation of the preparation of β-cyclodextrin covalent organic framework (β-CD COF) material-incorporated organic polymer monolith for separating the amides, amino acids, nucleosides, aromatic acids, and positional isomers. β-CD COF materials were synthesized and incorporated into the monolith as the stationary phase. Then, the incorporated monolith was applied in the capillary electrochromatography system for separating small molecules.

Covalent Organic Frameworks in Separation

In the wake of sustainable development, materials research is going through a green revolution that is putting energy-efficient and environmentally friendly materials and methods in the limelight. In this quest for greener alternatives, covalent organic frameworks (COFs) have emerged as a new generation of designable crystalline porous polymers for a wide array of clean-energy and environmental applications. In this contribution, we categorically review the merits and shortcomings of COF bulk powders, nanosheets, freestanding thin films/membranes, and membranes on porous supports in various separation processes, including separation of gases, pervaporation, organic solvent nanofiltration, water purification, radionuclide sequestration, and chiral separations, with particular reference to COF material pore size, host–guest interactions, stability, selectivity, and permeability. This review covers the fabrication strategies of nanosheets, films, and membranes, as well as performance parameters, and provides an overview of the separation landscape with COFs in relation to other porous polymers, while seeking to interpret the future research opportunities in this field.

Preparation of Benzyl Quinine-modified Monolithic Column for Reversed-phase Capillary Electrochromatography

N-Benzylquininium chloride is a versatile functional monomer with quinoline and benzyl groups, which is beneficial for reversed-phase chromatography. In this study, a novel monolithic column with reversed-phase mode was synthesized using N-benzylquininium chloride as the monomer and 3-(acryloyloxy)-2-hydroxypropyl methacrylate as the cross-linker in a binary porogenic solvent consisting of PEG 400 and a 0.05 M sodium hydroxide aqueous solution. The alkaline solution were found to be useful for the improvement of the mechanical stability of the porous monoliths. The monolithic column showed excellent reversed-phase selectivity and various compounds, such as alkylbenzenes, phenols and polycyclic aromatic hydrocarbons, were separated successfully. The highest column efficiency was 1.75 × 10⁵ N m^-1. The relative standard deviations of the migration time for thiourea and four alkylbenzenes were all less than 5.0%, which indicates the monolithic column has good stability. The application of the monolithic column for the analysis of polycyclic aromatic hydrocarbons in spiked lake water samples illustrated its great potential for practical application.

A hydroxyl-functionalized homochiral porous organic cage for gas chromatographic separations

A hydroxyl-functionalized homochiral porous organic cage (POC) was synthesized and characterized by FTIR, NMR, thermogravimetric analysis (TGA), MALDI-TOF-MS, and elemental analysis. The synthesized homochiral POC was used as stationary phase to prepare a capillary gas chromatography (GC) column by a static coating method. The fabricated column shows excellent selectivity not only for the separation of positional isomers but also for the resolution of various racemates. Thirty-nine racemates have been resolved on the column, including alcohols, diols, halohydrocarbons, epoxides, esters, lactones, ketones, ethers, and organic acids. Compared to the commercial β-DEX 120 column and previously reported chiral POCs (CC3-R, CC9, and CC10)-coated columns, there are 11, 10, 24, and 15 tested racemates that cannot be resolved on β-DEX 120 column, CC3-R column, CC9 column, and CC10 column, respectively. This reveals that the fabricated column has prominent complementarity or superior separation performance to these columns in enantioseparation. Besides, the fabricated column can achieve some enantioseparations which are not possible using all previously reported chiral POC-based columns. Some positional isomers (xylenes, dichlorobenzenes, dibromobenzenes, nitrochlorobenzenes, and nitrobromobenzenes) were also separated with high-resolution values. The column exhibits good repeatability, reproducibility, and stability. The relative standard deviation (RSD) values of retention times were 0.03-0.18%, 0.11-0.92%, and 2.1-6.6% for run-to-run (n = 5), day-to-day (n = 5), and column-to-column (n = 3), respectively. The experimental results demonstrate the great potential of POCs for practical application in GC. Graphical Abstract A hydroxyl-functionalized homochiral porous organic cage was used as stationary phase for gas chromatography separation of racemates and positional isomers. The resolution of racemates mainly depended on hydrogen bonding, π-interaction, host-guest inclusion, steric fit, etc., while separation of positional isomers by shape-selective guest binding.

Covalent organic frameworks for separation applications

Covalent organic frameworks (COFs) are an emerging class of crystalline porous polymers with highly tuneable structures and functionalities. COFs have been proposed as ideal materials for applications in the energy-intensive field of molecular separation due to their notable intrinsic features such as low density, exceptional stability, high surface area, and readily adjustable pore size and chemical environment. This review attempts to highlight the key advancements made in the synthesis of COFs for diverse separation applications such as water treatment or the separation of gas mixtures and organic molecules, including chiral and isomeric compounds. Methods proposed for the fabrication of COF-based columns and continuous membranes for practical applications are also discussed in detail. Finally, a perspective regarding the remaining challenges and future directions for COF research in the field of separation has also been presented.

Ambient temperature fabrication of a covalent organic framework from 1,3,5-triformylphloroglucinol and 1,4-phenylenediamine as a coating for use in open-tubular capillary electrochromatography of drugs and amino acids

A covalent organic framework (COF) named TpPa-1 was designed and synthesized at ambient temperature by an ultrasound-assisted method from 1,3,5-triformylphloroglucinol (Tp) and 1,4-phenylenediamine (Pa-1). It was utilized as a stationary phase in open-tubular capillary electrochromatography (OT-CEC). The column was coated with TpPa-1 using a covalent bonding strategy. The coated capillary was characterized by morphology, crystallography, and mesoporous analysis to confirm the successful fabrication. The OT-CEC method was utilized for the analysis of tetracyclines, sulfonamides, cephalosporins and amino acids with high-resolution (Rs > 1.81) and good precision (RSD < 4.9%). It takes about 12 h from COF preparation to OT-CEC separation. Graphical abstract A covalent organic framework (COF) named TpPa-1 was synthesized at ambient temperature by an ultrasound-assisted method from 1,3,5-triformylphloroglucinol (Tp) and 1,4-phenylenediamine (Pa-1). COF-TpPa-1 modified capillary column was utilized for the analysis of tetracyclines, sulfonamides, cephalosporins and amino acids with high-resolution and good precision.

Recent advancements in open-tubular liquid chromatography and capillary electrochromatography during 2014-2018

This review critically discusses the developments on open-tubular liquid chromatography (OT-LC) and open-tubular capillary electrochromatography (OT-CEC) during 2014-2018. An appropriate Scopus search revealed 5 reviews, 4 theoretical papers on open-tubular format chromatography, 29 OT-LC articles, 68 OT-CEC articles and 4 OT-LC/OT-CEC articles, indicating a sustained interest in these areas. The open-tubular format typically uses a capillary column with inner walls that are coated with an ample layer or coating of solid stationary phase material. The ratio between the capillary internal diameter and coating thickness (CID/CT) is ideally ≤ 100 for appropriate chromatographic retention. We, therefore, approximated the CID/CT ratios and found that 22 OT-LC papers have CID/CT ratios ≤100. The other 7 OT-LC papers have CID/CT ratio >100 but have clearly demonstrated chromatographic retention. These 29 papers utilised reversed phase or ion exchange mechanisms using known or innovative solid stationary phase materials (e.g. metal organic frameworks), stationary pseudophases from ionic surfactants or porous supports. On the other hand, we found that 68 OT-CEC papers, 7 OT-LC papers and 4 OT-LC & OT-CEC papers have CID/CT ratios >100. Notably, 44 papers (42 OT-CEC and 2 OT-LC & OT-CEC) did not report the retention factor and/or effective electrophoretic mobility of analytes. Considering all covered papers, the most popular activity was on the development of new chromatographic materials as coatings. However, we encourage OT-CEC researchers to not only characterise changes in the electroosmotic flow but also verify the interaction of the analytes with the coating. In addition, the articles reported were largely driven by stationary phase or support development and not by practical applications.

Analysis of Evodiae Fructus by capillary electrochromatography-mass spectrometry with methyl-vinylimidazole functionalized organic polymer monolilth as stationary phases

Evodiae Fructus is used as a traditional Chinese medicine for the treatment of several kinds of diseases with its bioactive constituents. In this study, a capillary electrochromatography-mass spectrometry (CEC-MS) method was developed to determine three bioactive compounds including evodiamine, rutaecarpine and limonin in Evodiae Fructus fruit. Home-developed monolithic columns with methyl-vinylimidazole functionalized organic polymer monolilth as stationary phases were used in CEC-MS with excellent separation selectivity and high efficiency. The CEC-MS methods provided 4-16 folds improvement of LODs when compared with CEC-UV method. The conditions, which could affect separation efficiency and detection sensitivity, were optimized. Under optimum conditions, baseline separation with high detection sensitivity was obtained. The method showed good linearity (R² >0.99) of 0.8-160 μg mL^-1 with low limits of detection of 0.15-0.31 μg mL^-1. Relative standard deviations of migration time and relative peak areas were <13.89%. Recoveries of evodiamine, rutaecarpine and limonin in Evodiae Fructus fruit were tested and calculated, which ranged from 102% to 113%. Finally, the three bioactive compounds in Evodiae Fructus herb samples from different regions were analyzed and studied. It has been demonstrated that the developed method has great potential for quality control of Evodiae Fructus herb.

Advances in capillary electro-chromatography

Capillary electrochromatography (CEC) is a micro-scale separation technique which is a hybrid between capillary electrophoresis (CE) and liquid chromatography (LC). CEC can be performed in packed, monolithic and open-tubular columns. In recent three years (from 2016 to 2018), enormous attention for CEC has been the development of novel stationary phases. This review mainly covers the development of novel stationary phases for open-tubular and monolithic columns. In particular, some biomaterials attracted increasing interest. There are no significant breakthroughs in technology and principles in CEC. The typical CEC applications, especially chiral separations are described.

Emerging porous materials in confined spaces: from chromatographic applications to flow chemistry

Porous materials confined within capillary columns/microfluidic devices are discussed, and progress in chromatographic and membrane separations and catalysis is reviewed.

Porous Organic Frameworks: Advanced Materials in Analytical Chemistry

Porous organic frameworks (POFs), a general term for covalent-organic frameworks (COFs), covalent triazine frameworks (CTFs), porous aromatic frameworks (PAFs), etc., are constructed from organic building monomers with strong covalent bonds and have generated great interest among researchers. The remarkable features, such as large surface areas, permanent porosity, high thermal and chemical stability, and convenient functionalization, promote the great potential of POFs in diverse applications. A critical overview of the important development in the design and synthesis of COFs, CTFs, and PAFs is provided and their state-of-the-art applications in analytical chemistry are discussed. POFs and their functional composites have been explored as advanced materials in "turn-off" or "turn-on" fluorescence detection and novel stationary phases for chromatographic separation, as well as a promising adsorbent for sample preparation methods. In addition, the prospects for the synthesis and utilization of POFs in analytical chemistry are also presented. These prospects can offer an outlook and reference for further study of the applications of POFs.

Recent Trends in Covalent and Metal Organic Frameworks for Biomedical Applications

Materials science has seen a great deal of advancement and development. The discovery of new types of materials sparked the study of their properties followed by applications ranging from separation, catalysis, optoelectronics, sensing, drug delivery and biomedicine, and many other uses in different fields of science. Metal organic frameworks (MOFs) and covalent organic frameworks (COFs) are a relatively new type of materials with high surface areas and permanent porosity that show great promise for such applications. The current study aims at presenting the recent work achieved in COFs and MOFs for biomedical applications, and to examine some challenges and future directions which the field may take. The paper herein surveys their synthesis, and their use as Drug Delivery Systems (DDS), in non-drug delivery therapeutics and for biosensing and diagnostics.