Core-shell magnetic molecularly imprinted polymer nanoparticles for the extraction of triazophos residues from vegetables

Rapid and reliable detection and quantification of organophosphorus pesticides using SERS combined with dispersive liquid-liquid microextraction

Rapid and reliable detection and quantification of pesticide residues in complex matrices by surface enhanced Raman spectroscopy (SERS) remain challenging due to the low level of target molecules and the interference of nontarget components. In this study, SERS was combined with dispersive liquid-liquid microextraction (DLLME) to develop a rapid and reliable method for the detection of organophosphorus pesticides (OPPs). In this method, DLLME was used to extract and enrich two representative OPPs (triazophos and parathion-methyl) from a liquid sample, and a portable Raman spectrometer was used to analyze the separated sediment using homemade gold nanoparticles colloids as enhancing substrates. The results showed that the developed method displayed good sensitivity and stability for the detection and quantification of triazophos and parathion-methyl with R² ≥ 0.98. The calculated limits of detection (LODs) in the simultaneous detection of triazophos and parathion-methyl were 2.17 × 10^-9 M (0.679 ppb) and 2.28 × 10^-8 M (5.998 ppb), and the calculated limits of quantification (LOQs) were 7.23 × 10^-9 M (2.26 ppb) and 7.62 × 10^-8 M (19.098 ppb), respectively. Furthermore, the developed SERS method was successfully applied to the detection of triazophos and parathion-methyl in apple juice with recoveries between 78.07% and 110.87% and relative standard deviations (RSDs) ≤ 2.06%. Therefore, the developed DLLME facilitated liquid SERS method exhibited good sensitivity and stability for the rapid detection and quantification of OPPs and had the potential to be applied to the rapid detection of OPPs in complex matrices.

Nanomaterial-Based Fluorescent Biosensor for Food Safety Analysis

Food safety issues have become a major threat to public health and have garnered considerable attention. Rapid and effective detection methods are crucial for ensuring food safety. Recently, nanostructured fluorescent materials have shown considerable potential for monitoring the quality and safety of food because of their fascinating optical characteristics at the nanoscale. In this review, we first introduce biomaterials and nanomaterials for food safety analysis. Subsequently, we perform a comprehensive analysis of food safety using fluorescent biosensors based on nanomaterials, including mycotoxins, heavy metals, antibiotics, pesticide residues, foodborne pathogens, and illegal additives. Finally, we provide new insights and discuss future approaches for the development of food safety detection, with the aim of improving fluorescence detection methods for the practical application of nanomaterials to ensure food safety and protect human health.

Application, advancement and green aspects of magnetic molecularly imprinted polymers in pesticide residue detection

Molecularly imprinted polymers (MIPs) have added a vital contribution to food quality and safety with the effective extraction of pesticide residues due to their unique properties. Magnetic molecularly imprinted polymers (MMIPs) are a superior approach to overcome stereotypical limitations due to their unique core-shell and novel composite structure, including high chemothermal stability, rapid extraction, and high selectivity. Over the past two decades, different MMIPs have been developed for pesticide extraction in actual food samples with a complex matrix. Nevertheless, such developments are desirable, yet the synthesis and mode of application of MMIP have great potential as a green chemistry approach that can significantly reduce environmental pollution and minimize resource utilization. In this review, the MMIP application for single or multipesticide detection has been summarized by critiquing each method's uniqueness and efficiency in real sample analysis and providing a possible green chemistry exploration procedure for MMIP synthesis and application for escalated food and environmental safety.

Selective magnetic solid-phase extraction of amide herbicides from fish samples coupled with ultra-high-performance liquid chromatography with tandem mass spectrometry

An efficient magnetic dummy template molecularly imprinted polymer nanocomposite was prepared using multi-walled carbon nanotubes as a support and metolachlor deschloro as a dummy template. The obtained nanocomposites were characterized using Fourier transform infrared spectroscopy, vibrating sample magnetometry, scanning electron microscopy, and transmission electron microscopy. The adsorption performance of the obtained nanocomposites was evaluated through binding experiments, including static adsorption, kinetic adsorption, and selective recognition studies. The obtained nanocomposites were successfully applied as selective sorbents for the magnetic solid-phase extraction of seven amide herbicides (alachlor, acetochlor, pretilachlor, butachlor, metolachlor, diethatyl ethyl, and dimethachlor) coupled with liquid chromatography-tandem mass spectrometry from fish samples. Under the optimized conditions, the limit of detection was 0.01-0.1 μg/kg. The obtained recoveries of the amide herbicides from the fish samples were in the range of 88.0 to 102.1% with a relative standard deviation of less than 7.5%. This method, which eliminated the effect of template leakage on qualitative and quantitative analysis was found to be superior to the methods reported in the literature. The results indicated that it could be successfully applied to analyze amide herbicides in fish samples with satisfactory recoveries.

Ultrasound-assisted solid phase microextraction-HPLC method based on Fe3O4@SiO2-NH2-molecularly imprinted polymer magnetic nano-sorbent for rapid and efficient extraction of harmaline from Peganum harmala extract

In the present study, a magnetic molecularly imprinted polymer (MMIP) was synthesized for the extraction of harmaline from Peganum harmala by dispersive solid-phase microextraction (DSPME). The MMIP for selective and intelligent extraction of harmaline with excellent functionality and high selectivity was synthesized using the sol-gel method with functionalized superparamagnetic core-shell nanoparticles, ethylene glycol dimethacrylate (EDMA) as a cross-linker, methacrylic acid (MAA) as a functional monomer, and 2,2-azobisisobutyronitrile (AIBN) as a porogen. To study the properties and morphology of the coated polymer, FT-IR spectroscopy, FESEM, TEM images, and VSM were used. The DSPME-HPLC-UV equipment was used to quantify and analyze the data obtained from harmaline extraction. In this research, the efficiency of the synthesized polymer in harmaline extraction was modeled and optimized using the response surface methodology based on central composite design (RSM-CCD). In addition, for modeling the isotherm of harmaline sorption by the MMIP, Langmuir and Freundlich isotherm equations were used. The obtained results showed that the extraction of harmaline with the MMIP was well described with Freundlich isotherm. The results of the validation of the method showed that the measurement of harmaline in the concentration range of 1.0-4000 ng mL^-1 followed a linear relationship (R² = 9986.0). Moreover, the accuracy or repeatability index (% RSD) was determined to be < 10, and the LOQ and LOD values were 0.526 and 0.158 ng mL^-1, respectively. The results of this study showed that the DSPME technique by using the synthesized MMIP as an effective sorbent with high efficiency and capacity could be utilized for pre-concentration and extraction of harmaline from real and complex samples.

Unsupported liquid-state platform for SERS-based determination of triazophos

A highly reproducible surface-enhanced Raman scattering (SERS) unsupported liquid-state platform (ULP) was developed for accurate quantitative determination of triazophos. Herein, citrate-reduced Ag NPs suspension was concentrated and placed in a stainless steel perforated template to form the SERS ULP. The relative standard deviation of the SERS measurements was less than 5% (n ≥ 10), and the R² of the calibration curve was 0.994. The developed SERS ULP was applied for determination of triazophos in spiked agricultural products (rice, cabbage, and apple). Experiment results showed that the coefficient of variation ranged from 5.3 to 6.2% for intra-day and from 5.5 to 6.3% for inter-day (n = 3), which proved excellent SERS reproducibility. Moreover, the results were in good agreement with those from HPLC analysis. As a liquid-state SERS substrate, the highly reproducible ULP can perform precision quantitative analysis without surface modification of NPs, which is a significant improvement. This method provides a new perspective for quantitative SERS analysis of pesticide residues. Graphical abstract.

Specific adsorption of tetracycline from milk by using biocompatible magnetic molecular imprinting material and evaluation by ECD

Biocompatible magnetic molecularly imprinted polymers (BMMIPs) were prepared with Zein for the first time, and were used to enrich tetracycline compounds selectively. Innovative combination of BMMIPs and electrochemistry to obtain lower detection line to satisfy industrial detection demands. Using Zein as the crosslinking agent, the polymers were synthesized on the surface of Fe₃O₄ particles. The scanning electron microscope, transmission electron microscope and X-ray diffraction technologies were used to characterize BMMIPs. Through optimization, BMMIPs attained large adsorption capacity (236.40 mg/g) with fast kinetics (40 min) and followed the Langmuir isotherm and pseudo-second-order kinetic models. BMMIPs had good recognition ability, the selective factors of oxytetracycline, chlortetracycline, doxycycline were 4.78, 4.23, and 3.39, respectively. Excellent linearity was attained in the range of 0.025-500 μg/mL, with low detection limits and low quantitation limits of 0.025 and 0.083 μg/mL. According to our exploring, BMMIPs was ideal materials for enrichment of tetracycline in complex biological samples.

PEGylated Thermo-Sensitive Bionic Magnetic Core-Shell Structure Molecularly Imprinted Polymers Based on Halloysite Nanotubes for Specific Adsorption and Separation of Bovine Serum Albumin

Novel PEGylated thermo-sensitive bionic magnetic core-shell structure molecularly imprinted polymers (PMMIPs) for the specific adsorption and separation of bovine serum albumin (BSA) were obtained via a surface-imprinting technique. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), fourier transform infrared spectrometry (FT-IR), thermal gravimetric analysis (TGA), and specific surface area (BET), were adopted to demonstrate that novel PMMIPs were successfully synthesized. Subsequently, the prepared PMMIPs were used as the extractor for BSA and were combined with magnetic solid-phase extraction. The concentrations of BSA were detected by UV-vis spectrophotometry at 278 nm. The maximum adsorption capacity of the PMMIPs was 258 mg g⁻¹, which is much higher than that of non-imprinted polymer (PMNIPs). PMMIPs showed favorable selectivity for BSA against reference proteins, i.e., bovine hemoglobin, ovalbumin and lysozyme. PMMIPs were further used to recognize BSA in protein mixtures, milk, urine and sewage, these results revealed that approximately 96% of the ideal-state adsorption capacity of PMMIPs for BSA was achieved under complicated conditions. Regeneration and reusability studies demonstrated that adsorption capacity loss of the PMMIPs was not obvious after recycling for four times. Facile synthesis, excellent adsorption property and efficient selectivity for BSA trapping are features that highlight PMMIPs as an attractive candidate for biomacromolecular purification.

Magnetic ferroferric oxide and polydopamine molecularly imprinted polymer nanocomposites based electrochemical impedance sensor for the selective separation and sensitive determination of dichlorodiphenyltrichloroethane (DDT)

Dichlorodiphenyltrichloroethane (DDT) is a kind of broad-spectrum insecticides, which is potentially toxic and persistently threatens the safety of environment and food, due to their stability in nature and difficulty to degrade. For the first time, a novel impedance chemical sensor based on magnetic Fe₃O₄ and polydopamine molecularly imprinted polymer magnetic nanoparticles (PDA@Fe₃O₄ MIP MNPs) was designed. Bisphenol A (BPA) and dopamine were used as virtual template molecules and functional monomer for MIP synthesis, respectively. Recognition cavities formed in PDA layers could specifically recognize and effectively adsorb DDT molecules, with the help of virtual templates that had similar molecular structure to DDTs. The as-prepared PDA@Fe₃O₄-MIP MNPs could be used for specific adsorption and efficient extraction of target molecules 4,4'-DDT from food samples. The electrochemical impedance of the PDA@Fe₃O₄-MIP MNPs increased sensitively with the adsorption of 4,4'-DDT, the correlationship between of the electrochemical impedance response and the concentration of 4,4'-DDT were applied in the construction of electrochemical impedance sensors for the determination of 4,4'-DDT. The sensor showed a good linear relationship between the charge transfer resistance (R_ct) and the 4,4'-DDT concentration over a range from 1 × 10^-11 to 1 × 10^-3 mol L^-1 with a detection limit of 6 × 10^-12 mol L^-1. The sensor also exhibited excellent sensitivity and selectivity as well as high stability for the detection of pesticide residues and other environmentally harmful chemicals in various food samples.

A Novel CdSe/ZnS Quantum Dots Fluorescence Assay Based on Molecularly Imprinted Sensitive Membranes for Determination of Triazophos Residues in Cabbage and Apple

In the present study we have developed a direct competitive CdSe/ZnS quantum dot (QD) fluorescence assay based on micro-array-imprinted membranes for the determination of triazophos in cabbage and apple. The imprinted membranes were directly synthesized on the surface of a 96-well plate by thermal polymerization using triadimefon as the dummy template. Under optimal conditions, the assay showed an excellent linear response over the concentration ranges of 0.1-10,000 μg L-1 with a good coefficient of determination (R 2= 0.982). The sensitivity (IC50) and limit of detection (LOD, expressed as IC15) of the developed assay were 3.63 mg L-1 and 0.31 μg L-1, respectively. The applicability of the developed approach was tested for detecting triazophos in incurred samples. The method showed excellent recoveries (109.6-118.9%) and relative standard deviations (RSDs) between 9.9 and 19.5%. The obtained results correlated well with those obtained by LC-MS/MS (R 2= 0.9995). The competitive assay using CdSe/ZnS QDs as fluorescence-labeled probe showed good sensitivity, steady and fast response, and excellent anti-interference ability compared to conventional fluorescence-quenching methods. Finally, the feasibility of the proposed methodology was successfully applied for detection of triazophos in real samples.

Surface molecularly imprinted polymers prepared by two-step precipitation polymerization for the selective extraction of oleanolic acid from grape pomace extract

Surface molecularly imprinted polymers were successfully prepared by a novel two-step precipitation polymerization method. The first-step allowed the formation of 4-vinylpyridine divinylbenzene and trimethylolpropane trimethacrylate copolymeric microspheres. In the second-step precipitation polymerization, microspheres were modified with a molecularly imprinting layer of oleanolic acid as template, methacrylic acid as functional monomer, and divinylbenzene/ethylene glycol dimethacrylate as cross-linker. The obtained polymers had an average diameter of 4.43 μm and a polydispersity index of 1.011; adsorption equilibrium was achieved within 40 min, with adsorption capacity reaching 27.4 mg/g. Subsequently, the polymers were successfully applied as the adsorbents of molecularly imprinted solid-phase extraction to separate and purify the oleanolic acid from grape pomace. The content of oleanolic acid in the grape pomace extract was enhanced from 13.4 to 93.2% after using the molecularly imprinted solid-phase extraction process. This work provides an efficient way for effective oleanolic acid separation and enrichment from complex matrices, which is especially valuable in industrial production.

Selective extraction of theophylline from plasma by copper-doped magnetic microspheres prior to its quantification by HPLC

The authors describe the preparation of copper-doped magnetic microspheres (Cu-Fe₃O₄) by a solvothermal method. Due to their good magnetic property and high affinity for compounds containing an imidazole moiety (containing N-H), they are excellent adsorbents for such compounds as tested by eighteen compounds. Specifically, a method has been developed for magnetic solid-phase extraction (MSPE) of theophylline (TP) from plasma. The method enables selective enrichment of TP over many potential interferents that can occur in plasma. Following elution with alkaline methanol, TP was quantified by HPLC-UV at a detection wavelength of 272 nm. Under the optimized conditions, a linear response is found for the 0.02 to 20 μg·mL^-1 concentration range, and the limit of detection is as low as 3 ng·mL^-1. Recoveries from spiked samples range from 91.2 to 100.4%, and the repeatabilities are between 2.9 and 12% (for n = 6). The method was successfully applied to the determination of TP in rabbit and rat plasma. Graphical abstract Copper-doped magnetic microspheres are described that show good magnetic property and high affinity for compounds containing an imidazole moiety (containing an N-H group). They were successfully applied to the selective extraction of theophylline in plasma.

Biomimetic enzyme-linked immunoassay based on a molecularly imprinted 96-well plate for the determination of triazophos residues in real samples

In this study, a direct competitive biomimetic enzyme-linked immune-sorbent assay (BELISA) based on a molecularly imprinted nanomembrane as an artificial antibody was developed for the determination of triazophos in real samples. The imprinted film was directly synthesized on the well surface of a 96-well plate using a dummy molecular template under the conditions of thermal polymerization. The developed BELISA using a hapten of triazophos as an enzyme-labeled probe is much more sensitive, simple, quick, steady and inexpensive than the other instrumental and immuno assay methods. Under optimal conditions, the linear range of the method was 0.001–10 000 μg L⁻¹ with a good regression coefficient of 0.977. The sensitivity (IC₅₀) and the limit of detection (LOD) of BELISA were 428 μg L⁻¹ and 0.001 μg L⁻¹, respectively. This method was performed to detect triazophos in cabbage and apple samples, and showed excellent recovery and relative standard deviations (RSDs) ranging from 70.5 to 119.8% and from 5.2 to 19.7%, respectively. The results correlated well with those obtained using high performance liquid chromatography-tandem mass spectrometry.

In this study, a direct competitive biomimetic enzyme-linked immune-sorbent assay (BELISA) based on a molecularly imprinted nanomembrane as an artificial antibody was developed for the determination of triazophos in real samples.