Voltammetric sensor for trichloroacetic acid using a glassy carbon electrode modified with Au@Ag nanorods and hemoglobin

Experimental High-Resolution Observation of the Truncated Double-Icosahedron Structure: A Stable Twinned Shell in Alloyed Au-Ag Core@Shell Nanoparticles

Given the binary nature of nanoalloy systems, their properties are dependent on their size, shape, structure, composition, and chemical ordering. When energy and entropic factors for shapes and structure variations are considered in nanoparticle growth, the spectra of shapes become so vast that even metastable arrangements have been reported under ambient conditions. Experimental and theoretical variations of multiply twinned particles have been observed, from the Ino and Marks decahedra to polyicosahedra and polydecahedra with comparable energetic stability among them. Herein, we report the experimental production of a stable doubly truncated double-icosahedron structure (TdIh) in Au-Ag nanoparticles, in which a twinned Ag-rich alloyed shell is reconstructed on a Au-Ag alloyed Ino-decahedral core. The structure, chemical composition, and growth pathway are proposed on the basis of high-angle annular dark-field scanning transmission electron microscopy analysis and excess energy calculations, while its structural stability is estimated by large-scale atomic molecular dynamics simulations. This novel nanostructure differs from other structures previously reported.

Traditional methods and biosensors for detecting disinfection by-products in water: A review

In recent years, pollution caused by disinfection by-products (DBPs) has become a global concern. Initially, there were fewer contaminants, and the mechanism of their generation was unclear; however, the number of contaminants has increased exponentially as a result of rapid industrialization and numerous economic activities (e.q., during the outbreak of COVID-19 a surge in the use of chlorinated disinfectants was observed). DBP toxicity results in various adverse health effects and organ failure in humans. In addition, it profoundly affects other forms of life, including animals, plants, and microorganisms. This review comprehensively discusses the pre-treatment methods of traditional and emerging DBPs and the technologies applied for their detection. Additionally, this paper provides a detailed discussion of the principles, applicability, and characteristics of traditional large-scale instrumentation methods (such as gas/liquid/ion chromatography coupled with mass spectrometry) for detecting DBPs based on their respective detection techniques. At the same time, the design, functionality, classification, and characteristics of rapid detection technologies (such as biosensors) are also detailed and analyzed.

Upcycling Bread Waste into a Ag-Doped Carbon Material Applied to the Detection of Halogenated Compounds in Waters

Bread waste is a major part of food wastage which could be upcycled to produce functional materials, following the principles of the circular bioeconomy. This work shows that bread waste can be recycled and valorized to produce a composite conductive material with excellent properties for chemical sensor applications. Here, dry bread is impregnated with an aqueous solution of a silver precursor and pyrolyzed to produce a porous carbon matrix containing Ag nanoparticles with diameters ranging from 20 to 40 nm. These particles perform as catalytic redox centers for the electrochemical detection of halide ions (Cl^-, Br^-, and I^-) and organohalide target molecules such as sucralose and trichloroacetic acid. A thorough analytical characterization is carried out to show the potential application of the developed material for the manufacturing of electrochemical sensor approaches. The material preparation is sustainable, low-cost, simple, and upscalable. These are ideal features for the large-scale manufacturing by screen-printing technologies of single-use electrochemical sensors for the rapid analysis of halogenated organic pollutants in waters.

Determination of selenium and copper in water and food by hierarchical dendritic nano-gold modified glassy carbon electrodes

The sensitive determination of selenium and copper is of importance for environmental monitoring and food safety. A stripping voltammetric determination of selenium and copper in water and selenium-rich foods was developed using hierarchical dendritic gold nanostructure (AuHD) modified glassy carbon electrodes (GCE). The AuHD thin films were electrodeposited potentiostatically onto the GCE from a solution containing 25 mM HAuCl₄ and 0.1 M Na₂SO₄ at -0.6 V for 20 min. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) studies showed that the electrodeposited gold thin film shows a nanoforest-like morphology with a thickness of about 30-40 μm and a hierarchical dendritic structure with primary-, secondary-, and higher-order branches. Se(iv) and Cu(ii) in a 0.1 M H₂SO₄ solution were determined by square-wave anodic stripping voltammetry using the AuHDs/GCE as the working electrode. Prior to anodic stripping, Se(iv) and Cu(ii) were accumulated onto the working electrode surface at -0.2 V for 300 s. The stripping peak currents of Se(iv) at 0.81 V and Cu(ii) at 0.31 V were positively correlated with the concentrations of Se(iv) and Cu(ii) in a range of 50-700 nM. The limits of detection (3σ) for Se(iv) and Cu(ii) were 1.4 nM and 3.7 nM, respectively. The accuracy of the method was verified by analysing certified water standard reference materials, and the results showed that the method has good accuracy and high precision. The method was used to determine selenium and copper in tap water, selenium-rich rice and selenium-rich eggs. The results were compared with those obtained by using inductively coupled plasma-mass spectrometry (ICP-MS) and found to be consistent with those of ICP-MS. The proposed method had the advantages of simplicity, rapidity, good reproducibility, and high sensitivity and it can be used for the analysis of real samples.

A Review of Nanocomposite-Modified Electrochemical Sensors for Water Quality Monitoring

Electrochemical sensors play a significant role in detecting chemical ions, molecules, and pathogens in water and other applications. These sensors are sensitive, portable, fast, inexpensive, and suitable for online and in-situ measurements compared to other methods. They can provide the detection for any compound that can undergo certain transformations within a potential window. It enables applications in multiple ion detection, mainly since these sensors are primarily non-specific. In this paper, we provide a survey of electrochemical sensors for the detection of water contaminants, i.e., pesticides, nitrate, nitrite, phosphorus, water hardeners, disinfectant, and other emergent contaminants (phenol, estrogen, gallic acid etc.). We focus on the influence of surface modification of the working electrodes by carbon nanomaterials, metallic nanostructures, imprinted polymers and evaluate the corresponding sensing performance. Especially for pesticides, which are challenging and need special care, we highlight biosensors, such as enzymatic sensors, immunobiosensor, aptasensors, and biomimetic sensors. We discuss the sensors' overall performance, especially concerning real-sample performance and the capability for actual field application.

Continuous preparation of antimony nanocrystals with near infrared photothermal property by pulsed laser ablation in liquids

Antimony nanocrystals (Sb NCs) are of interest in energy storage, catalysis and cancer therapy for its special physical, chemical and biomedical properties. However, methodology challenges still remain in preparation of colloidal Sb NCs, due to the restricted reaction solution systems, high temperature and time costing for common routes. Herein, size controllable colloidal Sb NCs were continuously prepared by pulsed laser ablation of Sb target in different solvents, owning to the metal nanodroplet explosive ejection and thermal evaporation mechanisms. These well dispersed and stable Sb NCs showed excellent photothermal property in the near-infrared-II window.

Recent Advances on Electrochemical Sensors for the Detection of Organic Disinfection Byproducts in Water

Irreversible organ damage or even death frequently occurs when humans or animals unknowingly drink contaminated water. Therefore, in many countries drinking water is disinfected to ensure removal of harmful pathogens from drinking water. If upstream water treatment prior to disinfection is not adequate, disinfection byproducts (DBPs) can be formed. DBPs can exist as wide variety of compounds, but up until now, only several typical compounds have drinking water standards attributed to them. However, it is apparent that the range of DBPs present in water can comprise hundreds of compounds, some of which are at high enough concentrations to be toxic or potentially carcinogenic. Hence, it becomes increasingly significant and urgent to develop an accessible, affordable, and durable sensing platform for a broader range and more sensitive detection of DBPs. Compared with well-established laboratory detection techniques, electrochemical sensing has been identified as a promising alternative that will provide rapid, affordable, and sensitive DBP monitoring in remote water sources. Therefore, this Review covers current state-of-the-art development (within the past decade) in electrochemical sensing to detect organic DBPs in water, which covered three major aspects: (1) recognition mechanism, (2) electrodes with signal amplification, and (3) signal read-out techniques. Moreover, comprehensive quality assessments on electrochemical biosensors, including linear detection range, limit of detection (LoD) and recovery, have also been summarized.

Voltammetric sensing performances of a carbon ionic liquid electrode modified with black phosphorene and hemin

A black phosphorene (BPE) and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) hybrid was used for the immobilization of hemin on a carbon ionic liquid electrode (CILE). BPE inside the PEDOT:PSS film was stable without adverse effects of water and oxygen. The hemin-modified electrode facilitates electrochemical communication with a couple of well-shaped and enhanced redox waves. Therefore BPE exhibits an accelerating function to the electron movement. This sensor exhibits excellent electrocatalytic effects on the reduction of various substrates including trichloroacetic acid (TCA), nitrite and H₂O₂. As for TCA, the reduction current at -0.36 V (vs. Ag/AgCl) increases linearly in the concentration range from 2.0 to 180 mmol·L^-1 with a detection limit of 0.67 mmol·L^-1 (at 3σ). As for nitrite, the reduction current at -0.59 Vis linear in the 1.0 to 10.5 mmol·L^-1 concentration range, and the detection limit is 0.33 mmol·L^-1 (at 3σ). As for H₂O₂, the reduction current at -0.033 V (vs. Ag/AgCl) is linear in the concentration range from 4.0 to 35.0 mmol·L^-1 and the detection limit is 1.3 mmol·L^-1 (at 3σ). The real sample was analyzed with satisfactory results, which indicated that BPE had potential applications in the field of electrochemical biosensor. Graphical abstract Photos of (a) black phosphorene (BPE) solution, (b) poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS), (c) BPE-PEDOT:PSS (1:5) dispersion, and the fabrication procedure of this electrochemical sensor. It was applied to the determination of trichloroacetic acid, nitrite and hydrogen peroxide.

Electrochemical performance of myoglobin based on TiO2-doped carbon nanofiber decorated electrode and its applications in biosensing

A new biosensing strategy based on a TiO2-doped carbon nanofiber (CNF) composite modified electrode was developed. TiO2@CNF was prepared by electrospinning with further carbonization, before being characterized by various methods and used for electrode modification on the surface of carbon ionic liquid electrode (CILE). Myoglobin (Mb) was further immobilized on the modified electrode surface. The results of ultraviolet-visible (UV-vis) and Fourier transform infrared (FT-IR) spectroscopy showed that Mb maintained its native structure without denaturation in the composite film. Direct electron transfer and the electrocatalytic properties of Mb on the electrode surface were further investigated. A pair of quasi-reversible redox peaks appeared on the cyclic voltammogram, indicating that direct electrochemistry of Mb was realized in the nanocomposite film. This could be attributed to the specific properties of TiO2@CNF nanocomposite, including a large surface-to-volume ratio, good biocompatibility and high conductivity. Nafion/Mb/TiO2@CNF/CILE exhibited an excellent electrochemical catalytic ability in the reduction of trichloroacetic acid, NaNO2 and H2O2. All results demonstrated potential applications of TiO2@CNF in third-generation electrochemical biosensors.

A highly conductive thin film composite based on silver nanoparticles and malic acid for selective electrochemical sensing of trichloroacetic acid

A highly conductive thin film composite based on silver nanoparticles (AgNPs) and malic acid (MA) was deposited on glassy carbon electrode (GCE) for the selective and sensitive electrochemical sensing of trichloroacetic acid (TCA). The casting solution containing MA functionalized AgNPs was employed as a precursor for the thermal deposition of the AgNPs integrated MA thin film composite onto the GCE surface. The uniform coverage of AgNPs within the thin film composite at GCE was obtained by field emission scanning electron microscopy (FESEM). A significantly high charge transfer resistance of the modified electrode (85.7 Ω for AgNPs-MA/GCE in 2 mM [Fe(CN)₆]^3-/4- at a bias of +0.235 V as compared to bare GCE (38.01 Ω) verified the optimum coating of AgNPs-MA composite at the surface of the electrode. The AgNPs-MA composite deposited GCE revealed substantial electrocatalytic activity toward TCA reduction with significantly enhanced reduction current. The novel electrode manifested a linear square wave voltammetric (SWV) response over the concentration ranges of 0.1-2 (R² = 0.9953) and 4-100 μM (R² = 0.9969) with a limit of detection (LOD) and limit of quantification (LOQ) of 30 nM and 92.5 nM, respectively. The modified electrode exhibited an excellent long-term stability (30 days) with the retention of >95% of initial current. The selectivity of the proposed electrode for the determination of TCA was examined in the presence of dichloroacetic acid (DCA) and monochloroacetic acid (MCA) with the retention of high recovery percentages.

Enzymatic biosensing by covalent conjugation of enzymes to 3D-networks of graphene nanosheets on arrays of vertically aligned gold nanorods: Application to voltammetric glucose sensing

The authors demonstrate efficient direct electron transfer from the enzyme glucose oxidase to vertically aligned gold nanorods with a diameter of ~160 nm and a length of ~2 μm that are covalently linkage to a 3-dimensional network of reduced graphene oxide nanosheets. The assembly can be prepared by a 2-step electrochemical procedure. This hybrid structure holds the enzyme in a favorable position while retaining its functionality that ultimately provides enhanced performance for enzymatic sensing of glucose without utilizing mediators. The nanorod assembly was applied to the voltammetric detection of glucose. Figures of merit include an electrochemical sensitivity of 12 μA·mM^-1·cm^-2 (obtained from cathodic peak current at a voltage of -0.45 V vs. Ag/AgCl), a 3 μM detection limit (at signal/noise = 3), and a wide linear range (0.01-7 mM). The hybrid nanostructure has a heterogeneous electron transfer rate constant (k_s) of 2.9 s^-1. The high electrochemical activity is attributed to the synergistic effect of a large active surface and an enhanced electron transfer efficiency due to covalent amide linkage. Graphical Abstract Schematic of the procedure utilized for the fabrication of an electrochemical biosensor based on gold nanorods (AuNRs) modified with a reduced graphene oxide (rGO)/glucose oxidase (GOx) conjugate. The enzyme electrode was employed to the determination of glucose by differential pulse voltammetry.