A nanocomposite consisting of carbon nanotubes and gold nanoparticles in an amphiphilic copolymer for voltammetric determination of dopamine, paracetamol and uric acid

A systematic review on electrochemical sensors for the detection of acetaminophen

Considerable progress has been made in the electrochemical determination of acetaminophen (AP) over the past few decades. Nanomaterials or enzymes as electrode modifiers greatly improve the performance of AP electrochemical sensors. This review focuses on the development potential, detection principles and techniques for the electrochemical analysis of AP. In particular, the design and construction of AP electrochemical sensors are discussed from the perspective of non-enzyme materials (such as nanomaterials, including precious metals, transition metals and non-metals) and enzyme substances (such as aryl acylamidase, polyphenol oxidase and horseradish peroxidase). Moreover, the influencing factors for AP electrochemical sensors and the simultaneous detection of AP and other targets are summarized, and the future prospective of AP electrochemical sensors is outlined. This review provides a reference and guidance for the development and application of electrochemical sensors for AP detection.

Design of an Efficient Tin Selenide-Based Ternary Nanocomposite Electrode for Simultaneous Determination of Paracetamol, Tryptophan, and Caffeine

Electrochemical sensors play an essential role in the medical arena through assessing the drug quality and diagnosing diseases. The design of sensors relies on the electroactive properties of the material meticulously chosen to modify the electrode. Here in this work, a facile ternary SnSe/TiO₂@GO electroactive nanocomposite was prepared using tin selenide (SnSe) in combination with titanium dioxide (TiO₂) embedded on graphene oxide (GO). The ternary nanocomposite was characterized by X-ray diffraction, Raman, FT-IR, and X-ray photoelectron spectroscopy, energy dispersive analysis, and scanning electron microscopy. The ternary nanocomposite was then drop-coated on the GC electrode to form the SnSe/TiO₂@GO-GC electrode. Its electrochemical activity was demonstrated for simultaneous determination of paracetamol, tryptophan, and caffeine. The synergetic interaction of the components and their innate virtue showed enriched electrocatalytic activity such as a decrease in overpotential, enhancement in electron transfer, greater sensing ability and selectivity, wide linear range, and low detection limit toward the chosen analytes. Broad linear ranges of concentrations, 0.0089-410, 0.0136-87.66, and 0.0160-355 μM, with detection limits of 0.0030, 0.0053, and 0.0065 μM for paracetamol, tryptophan, and caffeine, respectively, were noticed. The electrode also displayed high selectivity, stability, repeatability, and reproducibility. Importantly, the study was successful for detection and quantification of the above components in real samples of blood serum, pharmaceutical formulations, and beverages.

Single-Atom Cobalt-Based Electrochemical Biomimetic Uric Acid Sensor with Wide Linear Range and Ultralow Detection Limit

Uric acid (UA) detection is essential in diagnosis of arthritis, preeclampsia, renal disorder, and cardiovascular diseases, but it is very challenging to realize the required wide detection range and low detection limit. We present here a single-atom catalyst consisting of Co^(II) atoms coordinated by an average of 3.4 N atoms on an N-doped graphene matrix (A-Co-NG) to build an electrochemical biomimetic sensor for UA detection. The A-Co-NG sensor achieves a wide detection range over 0.4-41,950 μM and an extremely low detection limit of 33.3 ± 0.024 nM, which are much better than previously reported sensors based on various nanostructured materials. Besides, the A-Co-NG sensor also demonstrates its accurate serum diagnosis for UA for its practical application. Combination of experimental and theoretical calculation discovers that the catalytic process of the A-Co-NG toward UA starts from the oxidation of Co species to form a Co³⁺-OH-UA*, followed by the generation of Co³⁺-OH + ^*UA_H, eventually leading to N-H bond dissociation for the formation of oxidized UA molecule and reduction of oxidized Co³⁺ to Co²⁺ for the regenerated A-Co-NG. This work provides a promising material to realize UA detection with wide detection range and low detection limit to meet the practical diagnosis requirements, and the proposed sensing mechanism sheds light on fundamental insights for guiding exploration of other biosensing processes.

Simultaneous Monitoring of Febuxostat and Uric Acid in Human Serum Samples Using the Direct Square-Wave Voltammetric Method

Background:

High uric acid serum level, hyperuricemia, is now associated with many diseases such as gout, chronic kidney disease, hypertension, coronary artery disease and diabetes. Febuxostat is a novel selective xanthine oxidase inhibitor approved for the treatment of hyperuricemia.

Objective:

The aim of this study was to develop a first analytical method for the simultaneous determination of febuxostat and uric acid.

Methods:

An unmodified boron-doped diamond electrode provided concurrent quantitation of drug at low levels and uric acid, which has clinical significance in the diagnosis and therapy of hyperuricemia, at relatively high concentrations. The direct square-wave voltammetric method was applied to the analysis of both analytes in human serum samples.

Results:

Under the optimized conditions, the linear response of peak current on febuxostat concentration was achieved in the range from 7.5 × 10-7 to 3 × 10-5 M, while uric acid showed two linear ranges of 5 × 10-6 - 5 × 10-5 M and 5 × 10-5 - 2 × 10-4 M. The method was successfully utilised for quantification of both analytes in human serum samples. Good recoveries were obtained without interference from common inorganic cations and anions as well as glucose, dopamine, ascorbic and folic acids at concentrations expected in physiological conditions.

Conclusion:

The great benefits of developed method are fast analysis (only 7.5 s for run), low cost and simplicity of performance.

Low fouling electrochemical sensing in complex biological media by using the ionic liquid-doped conducting polymer PEDOT: application to voltammetric determination of dopamine

An electrochemical sensor that can resist biofouling even when operated in complex biological medium is developed for the determination of dopamine. It is based on the use of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) that is doped with the water insoluble ionic liquid (IL), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. A glassy carbon electrode modified with PEDOT/IL is shown to enable accurate determination of dopamine, as a model analyte in the presence of high concentrations of proteins, and resist biological fouling even in native serum. It exhibited a low limit of detection of 33 nM for the detection of dopamine, with a wide linear range from 0.2 to 328 μM (at 0.2 V vs. saturated calomel electrode). The PEDOT/IL modified glassy carbon electrode has a porous microstructure, high electrical conductivity and good stability. The sensor can be used to quantify dopamine in human urine samples with satisfying accuracy. Graphical abstract An antifouling electrochemical sensor capable of detecting target in complex biological samples was developed based on the use of a conducting polymer (PEDOT) that was doped with a water insoluble ionic liquid.

Simultaneous voltammetric determination of acetaminophen and dopamine using a glassy carbon electrode modified with copper porphyrin-exfoliated graphene

Graphene nanosheets (GSs) were prepared via liquid-phase non-covalent exfoliation of graphite powder in N,N-dimethylformamide under the assistance of copper(II) meso-tetra(4-carboxyphenyl)porphyrin tetrasodium salt Na₄(CuTCPP). A glassy carbon electrode (GCE) was modified with a film of such GSs which, due to the good electrical conductivity of graphene and the electrocatalytic properties of Na₄(CuTCPP), is capable of simultaneous determination of acetaminophen (AC) and dopamine (DA). The peak currents, best measured at voltage of 0.2 V (for DA) and 0.4 V (for AC; both vs. SCE), increase linearly in the 0.0024-3.6 μM and 0.004-7.6 μM concentration ranges, respectively. The detection limits are 0.8 nM for DA and 0.7 nM for AC. The sensor was successfully applied to the simultaneous determination of AC and DA in pharmaceutical preparations and spiked human serum. The results were in good agreement with those obtained for the same samples by HPLC. Graphical abstract Graphene nanosheets were prepared via a facile liquid-phase exfoliation of graphite with the assistance of copper(II) meso-tetra(4-carboxyphenyl)porphyrin tetrasodium salt. A graphene nanosheet-film modified glassy carbon electrode was fabricated to determine acetaminophen and dopamine through a simple and effective strategy.

Advances in the design of nanomaterial-based electrochemical affinity and enzymatic biosensors for metabolic biomarkers: A review

This review (with 340 refs) focuses on methods for specific and sensitive detection of metabolites for diagnostic purposes, with particular emphasis on electrochemical nanomaterial-based sensors. It also covers novel candidate metabolites as potential biomarkers for diseases such as neurodegenerative diseases, autism spectrum disorder and hepatitis. Following an introduction into the field of metabolic biomarkers, a first major section classifies electrochemical biosensors according to the bioreceptor type (enzymatic, immuno, apta and peptide based sensors). A next section covers applications of nanomaterials in electrochemical biosensing (with subsections on the classification of nanomaterials, electrochemical approaches for signal generation and amplification using nanomaterials, and on nanomaterials as tags). A next large sections treats candidate metabolic biomarkers for diagnosis of diseases (in the context with metabolomics), with subsections on biomarkers for neurodegenerative diseases, autism spectrum disorder and hepatitis. The Conclusion addresses current challenges and future perspectives. Graphical abstract This review focuses on the recent developments in electrochemical biosensors based on the use of nanomaterials for the detection of metabolic biomarkers. It covers the critical metabolites for some diseases such as neurodegenerative diseases, autism spectrum disorder and hepatitis.

Voltammetric sensing based on the use of advanced carbonaceous nanomaterials: a review

This review (with 210 references) summarizes recent developments in the design of voltammetric chemical sensors and biosensors based on the use of carbon nanomaterials (CNMs). It is divided into subsections starting with an introduction into the field and a description of its current state. This is followed by a large section on various types of voltammetric sensors and biosensors using CNMs with subsections on sensors based on the use of carbon nanotubes, graphene, graphene oxides, graphene nanoribbons, fullerenes, ionic liquid composites with CNMs, carbon nanohorns, diamond nanoparticles, carbon dots, carbon nanofibers and mesoporous carbon. The third section gives conclusion and an outlook. Tables are presented on the application of such sensors to voltammetric detection of neurotransmitters, metabolites, dietary minerals, proteins, heavy metals, gaseous molecules, pharmaceuticals, environmental pollutants, food, beverages, cosmetics, commercial goods and drugs of abuse. The authors also describe advanced approaches for the fabrication of robust functional carbon nano(bio)sensors for voltammetric quantification of multiple targets. Graphical Abstract Featuring execellent electrical, catalytic and surface properies, CNMs have gained enormous attention for designing voltammetric sensors and biosensors. Functionalized CNM-modified electrode interfaces have demonstrated their prominent role in biological, environmental, pharmaceutical, chemical, food and industrial analysis.