Magnetic Fe3O4@poly(methacrylic acid) particles for selective preconcentration of trace arsenic species

A novel zwitterionic magnetic nanocomposite developed for non-invasive speciation analysis of inorganic chromium

3-(2-Aminoethylamino)propyltriethoxysilane and carboxyethylsilanetriol sodium salt were grafted on silica-coated Fe3O4 nanoparticles via sol-gel process to prepare novel amine- and carboxyl-bifunctionalized magnetic nanocomposites (SMNPs-(NH2 + COOH)). After well characterized, this doubly functionalized material was used as magnetic solid-phase extraction (MSPE) adsorbent to separate and enrich inorganic chromium species followed by inductively coupled plasma-mass spectrometry detection. The optimization of MSPE operation parameters including pH was conducted. It is reasonably elucidated that the adsorption mechanisms of zwitterionic SMNPs-(NH2 + COOH) towards chromium species are electrostatic and/or coordination interactions. Cr(VI) and Cr(III) can be adsorbed around pH 3.0 and around 10.0 respectively with strong anti-interference ability not only from other co-existing ions but also from the two labile species each other, and eluted by dilute nitric acid solution. With a 15-fold enrichment factor, the limits of detection of Cr(VI) and Cr(III) were 0.008 and 0.009 μg L-1, respectively, profiting from the maximum adsorption capacities of 7.52 and 6.11 mg g-1. The just one magnetic extraction matrix based speciation scheme possesses excellent convenience and friendliness to Cr(VI) and Cr(III) without any oxidation or reduction prior to capture of these two species. This protocol has been successfully applied to the speciation analysis of inorganic chromium in real-world environmental water samples.

Characterization and synthesis of new adsorbents with some natural waste materials for the purification of aqueous solutions

In this study, hexavalent chromium Removal from aqueous environments was investigated by using polyaniline composites with some natural waste materials. Batch experiments were used, and some parameters such as contact time, pH and adsorption isotherms were determined for the best composite with the highest removal efficiency. Scanning Electron Microscope (SEM), Fourier Transform Infrared (FTIR) spectroscopy, and X-ray Diffraction (XRD) were used to characterize the composites. According to the results, the polyaniline/walnut shell charcoal/PEG composite outperformed other composites and showed the highest chromium removal efficiency of 79.22%. Polyaniline/walnut shell charcoal/PEG has a larger specific surface area of 9.291 (m²/gr) which leads to an increase in its removal efficiency. For this composite, the highest removal efficiency was obtained at the pH = 2 and 30 min contact time. The maximum calculated adsorption capacity was 500 mg/g.

Determination of some heavy metals from aqueous solutions using modified Amberlite XAD-4 resin by selective solid-phase extraction

The adsorption efficiency of Pb(II) and Cd(II) from aqueous solutions on m-phenylenediamine-modified Amberlite XAD-4 resin was investigated. The effects of pH, adsorbent amount, initial metal concentration, eluent type and volume and flow rate on the retention of the metal ions have been studied on column studies. The optimum parameters were determined as pH 5, concentration 10 mg/L, stirring time 30 min and 0.2 g adsorbent amount and flow rate 2.5 mL/min for a quantitative adsorption. Sorption data were interpreted in terms of Langmuir and Freundlich equations, and both models were found to be fully appropriate. Each column can be used up to 10 sequential analyses without considerable change. The results indicate high metal adsorption capacity and satisfactory recovery of Pb(II) and Cd(II).

A new method for highly efficient separation and determination of arsenic species in natural water using silica modified with polyamines

A simple and highly efficient method for the determination of highly toxic arsenic species using non-covalently aminated silica is proposed. The polyamines including poly(hexamethyleneguanidine), poly(4,9-dioxadodecane-1,12-guanidine), hexadimethrine, and poly(diallyldimethylammonium) were tested as silica modifiers. The prepared adsorbents allow effective preconcentration of anionic species of arsenic from aqueous solutions. It was found that As(V) can be quantitatively extracted from solutions at pH 4.5-7.0 by the anion exchange mechanism in less than 5 min, while neutral at this pH As(III) was not adsorbed at these conditions. A reaction with 2,3-dimercapto-1-propanesulphonic acid, which resulted in the formation of the negatively charged complex of As(III) with adsorbents was used for its quantitative extraction from solutions with a pH of 3.5-6.5. A system of two cartridges filled with poly(diallyldimethylammonium) modified silica and the on-line reaction of As(III) with 2,3-dimercapto-1-propanesulphonic acid proceeding between the cartridges was used for separate preconcentration and determination of As(V) and As(III) at pH 5. The proposed method was used for four-year monitoring of natural water pollution by arsenic in the area of residence of the indigenous peoples of Tyva Republic (Russia).

Magnetic nanomaterials as sorbents for trace elements analysis in environmental and biological samples

This review focuses on magnetic nanomaterials as sorbents for trace elements analysis in environmental and biological samples. The design and preparation of magnetic nanomaterials with specific functional groups for trace elemental analysis are summarized, along with relevant adsorption mechanism. The application of these magnetic sorbents in different operation modes for the quantification of trace elements and their species in environmental and biological samples are discussed. The trend of development in this field is also prospected.

Polymethylolacrylamide/AuNPs Nanocomposites: Electrochemical Synthesis and Functional Characteristics

In this study the advantages of the electrochemical approach to the formation of polymer/metal nanoparticle composites are demonstrated. The method enables one to simplify the multistage processes of traditional technologies for the production of such materials through combining all intermediate processes in one stage and reducing the total formation time to 3–10 min. The possibility of a single-stage formation of a polymethylolacrylamide/AuNPs composite through including AuNPs into an electrically non-conducting polymethylolacrylamide film (carrier) formed by electropolymerization through potentiostatic electrolysis is also demonstrated for the first time. It is established that the addition of tetrachloroauric acid (HAuCl₄·4H₂O) into a monomeric composition containing acrylamide, formaldehyde, N,N′-methylene-bis-acrylamide, zinc chloride, and H₂O results in simultaneous electrochemical initiation of polymerization with the formation of a polymer film on the cathode, electrolytic reduction of gold ions to Au⁰, and immobilization of AuNPs particles into the growing polymer matrix. It was found that the formation of the PMAA / AuNPs composite is energetically more favorable than the synthesis of the main PMAA film, since it proceeds at a lower cathodic potential. The inclusion of AuNPs into the polymethylolacrylamide film was confirmed visually, as well as by X-ray phase analysis, small-angle X-ray scattering, microscopy, and element analysis. The gold content in the composite increases along with the increase of the concentration of HAuCl₄ in the electrolyte. The radius of the AuNPs particles was found to range between 3 and 7 nm. The AuNPs particles are spherical in shape and can combine into larger clusters containing up to 10 or more particles. The dynamics of formation, structure, and morphology of the polymethylolacrylamide/AuNPs composite were investigated. It was revealed that gold nanoparticles are mainly concentrated in the near-electrode and near-solution layers of the composite. We found that the composite has electrocatalytic activity. The possibility of its use as a sensor for hydrogen peroxide is demonstrated.

Polymer-Coated Magnetite Nanoparticles for Protein Immobilization

Since their discovery, magnetic nanoparticles (MNPs) have become materials with great potential, especially considering the applications of biomedical sciences. A series of works on the preparation, characterization, and application of MNPs has shown that the biological activity of such materials depends on their size, shape, core, and shell nature. Some of the most commonly used MNPs are those based on a magnetite core. On the other hand, synthetic biopolymers are used as a protective surface coating for these nanoparticles. This review describes the advances in the field of polymer-coated MNPs for protein immobilization over the past decade. General methods of MNP preparation and protein immobilization are presented. The most extensive section of this article discusses the latest work on the use of polymer-coated MNPs for the physical and chemical immobilization of three types of proteins: enzymes, antibodies, and serum proteins. Where possible, the effectiveness of the immobilization and the activity and use of the immobilized protein are reported. Finally, the information available in the peer-reviewed literature and the application perspectives for the MNP-immobilized protein systems are summarized as well.

Non-chromatographic arsenic speciation analyses in wild shrimp (Farfantepenaeus brasiliensis) using functionalized magnetic iron-nanoparticles

A new iron-magnetic nanomaterial functionalized with organophosphorus compound was used as solid-phase for arsenic speciation analysis in seafood samples by ICP-MS. The procedure was optimized using chemometric tools and the variables pH = 4.0, 15 min extraction time, and 20 mg of mass of material were obtained as the optimum point. The inorganic arsenic (iAs) extracted using nanoparticles presented concentrations between 20 and 100 µg kg^-1 in the evaluated samples. The method was validated for accuracy using CRMs DOLT-5 and DORM-4. It was possible to reuse the same magnetic nanomaterial for 6 successive cycles, and we obtained a detection limit of 16.4 ng kg^-1. The proposed method is suitable for the use of inorganic speciation of As, presenting good accuracy, precision, relatively low cost, and acquittance to green chemistry principles.

Recent Materials Developed for Dispersive Solid Phase Extraction

Solid phase extraction (SPE) is an analytical procedure developed with the purpose of separating a target analyte from a complex sample matrix prior to quantitative or qualitative determination. The purpose of such treatment is twofold: elimination of matrix constituents that could interfere with the detection process or even damage analytical equipment as well as enriching the analyte in the sample so that it is readily available for detection. Dispersive solid phase extraction (dSPE) is a recent development of the standard SPE technique that is attracting growing attention due to its remarkable simplicity, short extraction time and low requirement for solvent expenditure, accompanied by high effectiveness and wide applicability. This review aims to thoroughly survey recently conducted analytical studies focusing on methods utilizing novel, interesting nanomaterials as dSPE sorbents, as well as known materials that have been only recently successfully applied in dSPE techniques, and evaluate their performance and suitability based on comparison with previously reported analytical procedures.

Core-shell Fe3O4 polydopamine nanoparticles as sorbent for magnetic dispersive solid-phase extraction of copper from food samples

In the present study, core-shell Fe₃O₄ polydopamine nanoparticles were synthesized and used for the first time as an adsorbent for the vortex assisted magnetic dispersive solid phase extraction of copper from food samples. After elution, copper in the solutions was determined by FAAS. The adsorbent was characterized using X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller surface area, and zeta potential measurements. Various parameters affecting the magnetic dispersive solid-phase extraction were evaluated. The optimum pH and magnetic adsorbent amount were found to be 5 and 40 mg, respectively. Elution was made by 3 mL of 2 mol L^-1 HNO₃.The major advantage of the method is the fast equilibration during adsorption without the need for vortexing or shaking. The preconcentration factor and detection limit of the method were found to be 150 and 0.22 mg L^-1, respectively. The precision (as RSD%) and adsorption capacity of the method were 3.7% and 28 mg g^-1, respectively. The method was successfully verified by analyzing four certified reference materials (SPS-WW1 Batch 114 Wastewater, TMDA-53.3 Lake water, BCR-482 Lichen and 1573a Tomato Leaves) and by addition/recovery tests of copper standard solution in organic baby food, muesli, macaroni, honey, and milk samples.

Determination and speciation of ultratrace arsenic and chromium species using aluminium oxide supported on graphene oxide

Alumina supported on graphene oxide (Al₂O₃/GO) nanocomposite as new nanosorbent in dispersive micro-solid phase extraction (DMSPE) for As(V) and Cr(III) preconcentration is described. The crucial issue of the study is synthesis of novel nanocomposite suitable for sorption of selected species of arsenic and chromium. Al₂O₃/GO demonstrates selectivity toward arsenates in the presence of arsenites at pH 5 and chromium(III) ions in the presence of chromate anions at pH 6. The Al₂O₃/GO nanocomposite was characterized by scanning electron microscopy (SEM) transmission electron microscopy (TEM), powder X-ray diffraction (XRD) and the Raman spectroscopy. The maximum adsorption capacity calculated based on the Langmuir adsorption model were 43.9 mg g^-1 and 53.9 mg g^-1 for As(V) and Cr(III), respectively. The nanocomposite was used as solid sorbent in preconcentration of As(V) and Cr(III)_ions from water samples and their determination using energy dispersive X-ray fluorescence spectrometry (EDXRF). The As(V) and Cr(III) ions can be quantitatively preconcentrated from 25 to 100 mL aqueous samples within 5 min using DMSPE procedure and 1 mg of Al₂O₃/GO. The nanocomposite was also used for preparation of Al₂O₃/GO membrane. Then, As(V) and Cr(III)_ions can be retained under flow condition by passing analyzed solution through Al₂O₃/GO membrane. Under the optimized conditions, As(V) and Cr(III) ions can be determined with very good recovery (92-108%), precision (RSD 2.7-4.0%) and excellent limit of detection (0.02 ng mL^-1 As and 0.11 ng mL^-1 Cr). The accuracy of the method was studied by analyzing certified reference materials (NIST 1640a) and spiked real water samples.