Flexible liquid crystal polymer-based electrochemical sensor for in-situ detection of zinc(II) in seawater

Simultaneous voltammetric sensing of Zn2+, Cd2+, and Pb2+ using an electrodeposited Bi-Sb nanocomposite modified carbon paste electrode

A sensor for detecting Zn²⁺, Cd²⁺, and Pb²⁺ ions simultaneously based on the square wave anodic stripping response at a bismuth antimony (Bi-Sb) nanocomposite electrode was developed. The electrode was prepared in situ by electrodepositing bismuth and antimony on the surface of a carbon-paste electrode (CPE) while also reducing the analyte metal ions. The structure and performance of the Bi-Sb/CPE electrode were studied using scanning electron microscopy, X-ray diffraction, electrochemical impedance spectroscopy, and cyclic voltammetry. Operational conditions including the concentration of Sb and Bi, the type of electrolyte, pH, and preconcentration conditions were optimized. The linear ranges were determined to be 5-200 μg L^-1 for Zn²⁺, 1-200 μg L^-1 for Cd²⁺, and 1-150 μg L^-1 for Pb²⁺ with the optimized parameters. The limits of detection were 1.46 μg L^-1, 0.27 μg L^-1, and 0.29 μg L^-1 for Zn²⁺, Cd²⁺, and Pb²⁺, respectively. Furthermore, the Bi-Sb/CPE sensor is capable of selective determination of the target metals in the presence of the common cationic and anionic interfering species (Na⁺, K⁺, Ca²⁺, Mg²⁺, Fe³⁺, Mn²⁺, Co²⁺, Cl^-, SO₄ ^2- and HCO₃ ^-). Finally, the sensor was successfully applied to the simultaneous determination of Zn²⁺, Cd²⁺, and Pb²⁺ in a variety of real-world water samples.

SERS- and absorbance-based catalytic assay for determination of isocarbophos using aptamer-modified FeMOF nanozyme and in situ generated silver nanoparticles

A new Fe metal-organic framework-loaded liquid crystal 4-octoxybenzoic acid (FeMOF@OCTB) nanosol was synthesized using 1,3,5-phthalic acid, ferrous sulfate, and OCTB as precursors. The FeMOF@OCTB exhibits good stability and strong catalytic effect for the polyethylene glycol 400-Ag (I) indicator reaction, which was evaluated rapidly by the slope procedure. The generated silver nanoparticles have a strong surface-enhanced Raman scattering (SERS) effect and a surface plasmon resonance absorption (Abs) peak at 420 nm. This new bimodal nanosilver indicator reaction was coupled with the isocarbophos (IPS)-aptamer (Apt) reaction. A FeMOF@OCTB nanocatalytic amplified-SERS/Abs bimodal Apt assay for IPS was established. The SERS assay can detect IPS in the concentration range 0.02-1.2 nM, with a detection limit of 0.010 nM. It has been applied to the determination of IPS in rice samples. The relative standard deviation was 4.4-5.8%, and the recovery was 97.7-104%. An Ag nanosol plasmon SERS/Abs dimode aptamer assay was fabricated for trace isocarbophos, based on highly catalysis MOF@OCTB nanoenzyme.

Zinc detection in oil-polluted marine environment by stripping voltammetry with mercury-free nanoporous gold electrode

Detection of Zn(II) in oil-polluted seawater via square-wave anodic stripping voltammetry (SW-ASV) utilizing thin gold electrodes sputtered onto nanoporous poly(acrylic acid)-grafted-poly(vinylidene difluoride) (PAA-g-PVDF) membrane is herein reported. Prior to SW-ASV, PAA grafted nanopores demonstrated to efficiently trap Zn(II) ions at open circuit. This passive adsorption followed a Langmuir law. An affinity constant of 1.41 L \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upmu $$\end{document}μmol\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^{-1}$$\end{document}-1 and a maximum Zn(II) adsorbed mass q\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_{max}$$\end{document}max of 1.21 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upmu $$\end{document}μmol g\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^{-1}$$\end{document}-1 were found. Applied SW-ASV protocol implied an accumulation step (− 1.2 V for 120 s) followed by a stripping step (− 1.2 to 1 V; 25 Hz; step: 4 mV; amplitude: 25 mV; acetate buffer (pH 5.5)). It revealed a Zn redox potential at − 0.8 V (Ag/AgCl pseudo-reference). Multiple measurements in synthetic waters close to the composition of production waters exhibited a decreasing precision with the number of readings R (1.65\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\%$$\end{document}% (R = 2) and 6.56\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\%$$\end{document}% (R = 3)). These membrane-electrodes should be used as disposable. The intra-batch mean precision was 14\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\%$$\end{document}% (n = 3) while inter-batches precision was 20\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\%$$\end{document}% (n = 15). Linear and linear-log calibrations allow exploitation of Zn(II) concentrations ranging from 10 to 500 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upmu $$\end{document}μg L\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^{-1}$$\end{document}-1 and 100 to 1000 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upmu $$\end{document}μg L\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^{-1}$$\end{document}-1 respectively. The LOD was 4.2 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upmu $$\end{document}μg L\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^{-1}$$\end{document}-1 (3S/N). Thanks to obtained calibration, a detected Zn(II) content of 1 ppm in a raw production water from North Sea oil platform was determined.

An innovative autonomous robotic system for on-site detection of heavy metal pollution plumes in surface water

Smart monitoring has been studied and developed in recent years to create faster, cheaper, and more user-friendly on-site methods. The present study describes an innovative technology for investigative monitoring of heavy metal pollution (Cu and Pb) in surface water. It is composed of an autonomous surface vehicle capable of semiautonomous driving and equipped with a microfluidic device for detection of heavy metals. Detection is based on the method of square wave anodic stripping voltammetry using carbon-based screen-printed electrodes (SPEs). The focus of this work was to validate the ability of the integrated system to perform on-site detection of heavy metal pollution plumes in river catchments. This scenario was simulated in laboratory experiments. The main performance characteristics of the system, which was evaluated based on ISO 15839 were measurement bias (Pb 75%, Cu 65%), reproducibility (in terms of relative standard deviation: Pb 11-18%, Cu 6-10%) and the limit of detection (4 µg/L for Pb and 7 µg/L for Cu). The lowest detectable change (LDC), which is an important performance characteristic for this application, was estimated to be 4-5 µg/L for Pb and 6-7 µg/L for Cu. The life span of an SPE averaged 39 measurements per day, which is considered sufficient for intended monitoring campaigns. This work demonstrated the suitability of the integrated system for on-site detection of Pb and Cu emissions from large and medium urban areas discharging into small water bodies.

Development of a Heavy Metal Sensing Boat for Automatic Analysis in Natural Waters Utilizing Anodic Stripping Voltammetry

Determination of the levels of heavy metal ions would support assessment of sources and pathways of water pollution. However, traditional spatial assessment by manual sampling and off-site detection in the laboratory is expensive and time-consuming and requires trained personnel. Aiming to fill the gap between on-site automatic approaches and laboratory techniques, we developed an autonomous sensing boat for on-site heavy metal detection using square-wave anodic stripping voltammetry. A fluidic sensing system was developed to integrate into the boat as the critical sensing component and could detect ≤1 μg/L Pb, ≤6 μg/L Cu, and ≤71 μg/L Cd simultaneously in the laboratory. Once its integration was completed, the autonomous sensing boat was tested in the field, demonstrating its ability to distinguish the highest concentration of Pb in an effluent of a galena-enriched mine compared to those at other sites in the stream (Osor Stream, Girona, Spain).

PVDF Nanofiber Sensor for Vibration Measurement in a String

Flexible, self-powered and miniaturized sensors are extensively used in the areas of sports, soft robotics, health care and communication devices. Measurement of vibration is important for determining the mechanical properties of a structure, specifically the string tension in strings. In this work, a flexible, lightweight and self-powered sensor is developed and attached to a string to measure vibrations characteristics in strings. Electrospun poly(vinylidene) fluoride (PVDF) nanofibers are deposited on a flexible liquid crystal polymer (LCP) substrate for the development of the sensor. The electrospinning process is optimized for different needle sizes (0.34–0.84 mm) and flow rates (0.6–3 mL/h). The characterization of the sensor is done in a cantilever configuration and the test results indicate the sensor’s capability to measure the frequency and strain in the required range. The comparison of the results from the developed PVDF sensor and a commercial Laser Displacement Sensor (LDS) showed good resemblance (±0.2%) and a linear voltage profile (0.2 mV/με). The sensor, upon attachment to a racket string, is able to measure single impacts and sinusoidal vibrations. The repeatability of the results on the measurement of vibrations produced by an impact hammer and a mini shaker demonstrate an exciting new application for piezoelectric sensors.

Nanoparticles-Modified Chemical Sensor Fabricated on a Flexible Polymer Substrate for Cadmium(II) Detection

This paper presents the development of a chemical sensor which was microfabricated on top of liquid crystal polymer (LCP) substrate. As a result of the unique material properties of LCP, the sensor showed favorable flexibility as well as operational reliability. These features demonstrate potential for integration of the sensor into automated sensing vehicles to achieve real-time detection. The sensor consists of a gold working electrode, a silver/silver chloride reference electrode, and a gold counter electrode. The working electrode of the sensor was further modified with bismuth nanoparticles and Nafion. The modified sensor exhibited a significantly enhanced sensing capability toward cadmium metal ion (Cd(II)) in comparison to the unmodified one. The effects of deposition potential and deposition time on the sensing performance of the sensor were extensively investigated through electrochemical experiments. With optimized parameters, the sensor was capable of quantifying Cd(II) in the concentration range of 0.3 to 25 µg/L. The minimum Cd(II) concentration detected by the sensor was 0.06 µg/L under quiescent deposition. The obtained results suggest that the proposed sensor has a great potential to be deployed for in-situ Cd(II) determination.