Photoelectrochemical dopamine sensor based on a gold electrode modified with SnSe nanosheets

Signal amplification strategies in photoelectrochemical sensing of carcinoembryonic antigen

Early detection of cancer markers is critical for cancer diagnosis and cancer therapy since these markers may indicate cancer risk, incidence, and disease prognosis. Carcinoembryonic antigen (CEA) is a type of non-specific and broad-spectrum cancer biomarker commonly utilized for early cancer diagnosis. Moreover, it serves as an essential tool to assess the efficacy of cancer treatment and monitor tumor recurrence as well as metastasis, thus garnering significant attention for precise and sensitive CEA detection. In recent years, photoelectrochemical (PEC) techniques have emerged as prominent methods in CEA detection due to the advantages of PEC, such as simple equipment requirements, cost-effectiveness, high sensitivity, low interference from background signals, and easy of instrument miniaturization. Different signal amplification methods have been reported in PEC sensors for CEA analysis. Based on these, this article reviews PEC sensors based on various signal amplification strategies for detection of CEA during the last five years. The advantages and drawbacks of these sensors were discussed, as well as future challenges.

Highly sensitive photoelectrochemical immunosensor for detecting cancer marker CA19-9 based on a new SnSe quantum dot

A sandwich-type photoelectrochemical (PEC) immunosensor was constructed on a screen-printed electrode (SPE) using gold-coated tin selenide quantum dots (Au-SnSe QDs) to determine the carbohydrate antigen 19 9 (CA19-9). Water-soluble Au-SnSe QDs were prepared by coating low-cost SnSe QDs, prepared by reacting tin(II) 2-ethyl hexanoate with selenium ions (HNaSe) without needing to add an external capping agent (SnSe QDs). SnSe-based QDs were characterized using high-resolution transmission electron microscopy (HR-TEM) and dynamic light scattering (DLS). DSP (dithio-bis (succinimidyl propionate)) as a linker was attached on Au@SnSe QDs and conjugated with CA19-9 monoclonal antibodies (Ab₂-DSP-Au@SnSE QD). For capture probe assembling, an Au nano-layer was electrochemically deposited on a SPE by HAuCl₄ reduction using 12 cycles of cyclic voltammetry (0 to - 1.4 V) at the scan rate of 50 mV s^-1, then covered by self-assembly of DSP and covalent conjugation of CA19-9 Ab₁. Our developed PEC immunosensor showed a significant photoelectrochemical response, recorded using chronoamperometry (0.3 V), for the presence of CA19-9 antigen in serum samples under light irradiation, with a detection limit (LOD) of 0.0011 U mL^-1 and a dynamic range of 0.005-100 U mL^-1. The recovery of CA19-9 determination from serum samples was 101 to 113%.

Codoping g-C3N4 with boron and graphene quantum dots: Enhancement of charge transfer for ultrasensitive and selective photoelectrochemical detection of dopamine

The development of superior photoelectrochemical (PEC) sensors for biosensing has become a major objective of PEC research. However, conventional PEC-active materials are typically constrained by a weak photocurrent response owing to their limited surface-active sites and high electron-hole recombination rate. Here, a boron and graphene quantum dots codoped g-C₃N₄ (named GBCN) as PEC sensor for highly sensitive dopamine (DA) detection was fabricated. GBCN exhibited the greatest photocurrent response and PEC activity compared to free g-C₃N₄ and g-C₃N₄ doped with boron. The proposed PEC sensor for DA determination exhibited a broad linear range (0.001-800 μM) and a low detection limit (0.96 nM). In particular, a sensitivity up to 10.3771 μA/μM/cm² was seen in the case of GBCN. The high PEC activity can be attributed to the following factors: (1) the boron and graphene quantum dots co-doping significantly increased the specific surface area of g-C₃N₄, providing more adsorption sites for DA; (2) the dopants extended the absorption intensity of g-C₃N₄, red-shifting the absorption from 470 to 540 nm; and (3) the synergism of boron and graphene quantum dots efficiently boosted the photogenerated electrons migration from the conduction band of g-C₃N₄ to graphene quantum dots, facilitating charge separation. In addition, GBCN also exhibited good anti-interference ability and stability. This research may shed light on the creation of a highly sensitive and selective PEC platform for detecting biomolecules.

Design of an Efficient Tin Selenide-Based Ternary Nanocomposite Electrode for Simultaneous Determination of Paracetamol, Tryptophan, and Caffeine

Electrochemical sensors play an essential role in the medical arena through assessing the drug quality and diagnosing diseases. The design of sensors relies on the electroactive properties of the material meticulously chosen to modify the electrode. Here in this work, a facile ternary SnSe/TiO₂@GO electroactive nanocomposite was prepared using tin selenide (SnSe) in combination with titanium dioxide (TiO₂) embedded on graphene oxide (GO). The ternary nanocomposite was characterized by X-ray diffraction, Raman, FT-IR, and X-ray photoelectron spectroscopy, energy dispersive analysis, and scanning electron microscopy. The ternary nanocomposite was then drop-coated on the GC electrode to form the SnSe/TiO₂@GO-GC electrode. Its electrochemical activity was demonstrated for simultaneous determination of paracetamol, tryptophan, and caffeine. The synergetic interaction of the components and their innate virtue showed enriched electrocatalytic activity such as a decrease in overpotential, enhancement in electron transfer, greater sensing ability and selectivity, wide linear range, and low detection limit toward the chosen analytes. Broad linear ranges of concentrations, 0.0089-410, 0.0136-87.66, and 0.0160-355 μM, with detection limits of 0.0030, 0.0053, and 0.0065 μM for paracetamol, tryptophan, and caffeine, respectively, were noticed. The electrode also displayed high selectivity, stability, repeatability, and reproducibility. Importantly, the study was successful for detection and quantification of the above components in real samples of blood serum, pharmaceutical formulations, and beverages.

Femtomolar detection of dopamine using surface plasmon resonance sensor based on chitosan/graphene quantum dots thin film

Due to the crucial role of dopamine (DA) in health and peripheral nervous systems, it is particularly important to develop an efficient and accurate sensor to monitor and determine DA concentrations for diagnostic purposes and diseases prevention. Up to now, using surface plasmon resonance (SPR) sensors in DA determination is very limited and its application still at the primary stage. In this work, a simple and ultra-sensitive SPR sensor was constructed for DA detection by preparation of chitosan- graphene quantum dots (CS-GQDs) thin film as the sensing layer. Other SPR measurements were conducted using different sensing layers; GQDs, CS for comparison. The proposed thin films were prepared by spin coating technique. The developed CS-GQDs thin film-based SPR sensor was successfully tested in DA concentration range from 0 fM to 1 pM. The designed SPR sensor showed outstanding performance in detecting DA sensitively (S = 0.011°/fM, R² = 0.8174) with low detection limit of 1.0 fM has been achieved for the first time. The increased angular shift of SPR dip, narrow full width half maximum of the SPR curves, excellent signal-to-noise ratio and figure of merit, and a binding affinity constant (K_A) of 2.962 PM^-1 demonstrated the potential of this sensor to detect DA with high accuracy. Overall, it was concluded that the proposed sensor would serve as a valuable tool in clinical diagnostic for the serious neurological disorders. This in turns has a significant socio-economic impact.

TiO2-Graphene Quantum Dots Nanocomposites for Photocatalysis in Energy and Biomedical Applications

The focus of current research in material science has shifted from “less efficient” single-component nanomaterials to the superior-performance, next-generation, multifunctional nanocomposites. TiO2 is a widely used benchmark photocatalyst with unique physicochemical properties. However, the large bandgap and massive recombination of photogenerated charge carriers limit its overall photocatalytic efficiency. When TiO2 nanoparticles are modified with graphene quantum dots (GQDs), some significant improvements can be achieved in terms of (i) broadening the light absorption wavelengths, (ii) design of active reaction sites, and (iii) control of the electron-hole (e−-h+) recombination. Accordingly, TiO2-GQDs nanocomposites exhibit promising multifunctionalities in a wide range of fields including, but not limited to, energy, biomedical aids, electronics, and flexible wearable sensors. This review presents some important aspects of TiO2-GQDs nanocomposites as photocatalysts in energy and biomedical applications. These include: (1) structural formulations and synthesis methods of TiO2-GQDs nanocomposites; (2) discourse about the mechanism behind the overall higher photoactivities of these nanocomposites; (3) various characterization techniques which can be used to judge the photocatalytic performance of these nanocomposites, and (4) the application of these nanocomposites in biomedical and energy conversion devices. Although some objectives have been achieved, new challenges still exist and hinder the widespread application of these nanocomposites. These challenges are briefly discussed in the Future Scope section of this review.

Silver nanoclusters and carbon dots based light-addressable sensors for multichannel detections of dopamine and glutathione and its applications in probing of parkinson's diseases

Parkinson's disease (PD) is a common neurological disease caused by nerve cells degradation which leads to extremely low level of dopamine (DA) in patients. Therefore, ultrasensitive DA detection is particularly important for the assessment and treatment of Parkinson's patients. In this research, photoelectrochemical (PEC) sensors based on Ag₄₄(SR)₃₀ nanoclusters (AgNCs) with 5-mercapto-2-nitrobenzoic acid (MNBA) ligands were first developed for ultrasensitive and selective detection of DA. Then, hybrid nanomaterials by introducing graphene oxide (GO) and silver nanoparticles (AgNPs) into AgNCs were used to enhance sensing properties. AgNCs/AgNPs/GO based PEC sensors achieved high sensitivity (7.476 nA/μM) and low limit of detection (LOD, S/N = 3, 53 nM) in the linear range 0.16-6 μM DA concentration. Besides DA, PD causes the concentration change of other analytes, such as glutathione (GSH). Multichannel detections of different analytes can provide more information in studying PD. Therefore, carbon dots (CDs) based PEC sensors were designed and achieved high sensing performances on GSH detection. Then, AgNCs/AgNPs/GO and CDs based PEC sensors were combined and extended into light-addressable sensors for multichannel detections of DA and GSH. Algorithms were used to solve interference problems to improve the measurement accuracy of DA and GSH in complex solution. Finally, PD biological model samples from mice were measured by light-addressable sensors. The relationships between the DA and GSH concentration and the PD stage were proved. Our designed light-addressable sensors exhibited advantages of multichannel detection, high sensitivity, fast response and so on. In the future, it can be expanded to detect more biological molecules to provide more information on studying PD.

Photoelectrochemical aptasensor with low background noise

In photoelectrochemical (PEC) detection, enhancing the PEC signal and depressing the blank signal are conducive to improve the sensitivity. Because the carbon nanotube (CNT) effectively transfers photogenerated electrons from SnSe to the electrode, the composite nanomaterial CNTs/SnSe generates a strong PEC signal. Methionine (Met), AuNPs, and probe DNA are woven together forming a nanoprobe which is used as a quencher to quench the PEC signal of CNTs/SnSe. When the nanoprobe and CNTs/SnSe are modified onto the electrode, there is a low blank signal. In the presence of metastatic breast cancer cells, the cells interact with the aptamer of dsDNA; concomitantly, cDNA is released to trigger catalytic hairpin assembly (CHA). As a result, a new dsDNA which has an overhang is formed. The nanoprobe on the surface of the electrode hybridizes with the newly formed dsDNA. Subsequently, the nanoprobe is released from the surface of the electrode and the quenching effect between the nanoprobe and the CNTs/SnSe disappears. The PEC aptasensor is linear in the concentration range of 300-5,000 cells/mL, and the detection limit is 180 cells/mL under optimized conditions. The relative standard deviation (RSD) is 3.6% at 10,000 cells/mL. This work demonstrates a promising strategy using CNTs/SnSe as the photoactive material and Met-AuNPs as the quencher to establish a PEC aptasensor with a high PEC response and low blank signal. It can be used to detect bioactive substances at ultralow levels prospectively. Graphical abstract.

Photo-electrochemical detection of dopamine in human urine and calf serum based on MIL-101 (Cr)/carbon black

A new photo-electrochemical sensor based on MIL-101(Cr) MOF/carbon black (CB) is fabricated and characterized. By using differential pulse voltammetry, dopamine (DA) can be effectively detected using a photo-electrochemical MIL-101(Cr)/CB sensor under visible light. The CB acts as the electron bridge to combine with the large specific surface area and photo-catalytic feature of MOF, which contribute to the improvements of sensitivity of DA detection. The concentration of the catalyst, pH value, accumulation potential, and accumulation time were also optimized. Furthermore, the electrochemical performances of MIL-101(Cr)/CB sensor was investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scan rate, electrochemically active surface area (ECSA), and amperometric responses. A detection limit of 0.38 nM (LOD = 3 s_b/S, s_b = 0.028) and a working range of 1 nM to 2.22 μM has been achieved. The MIL-101(Cr)/CB sensor exhibits excellent reproducibility, stability, and selectivity and also has satisfactory recovery rate for the analysis of real samples including calf serum and human urine. Graphical abstract.

Ultrahigh Average ZT Realized in p-Type SnSe Crystalline Thermoelectrics through Producing Extrinsic Vacancies

Crystalline SnSe has been revealed as an efficient thermoelectric candidate with outstanding performance. Herein, record-high thermoelectric performance is achieved among SnSe crystals via simply introducing a small amount of SnSe₂ as a kind of extrinsic defect dopant. This excellent performance mainly arises from the largely enhanced power factor by increasing the carrier concentration high as 6.55 × 10¹⁹ cm^-3, which was surprisingly promoted by introducing extrinsic SnSe₂ even though pristine SnSe₂ is an n-type conductor. The optimized carrier concentration promotes a deeper Fermi level and activates more valence bands, leading to an extraordinary room-temperature power factor ∼54 μW cm^-1 K^-2 through enlarging the band effective mass and Seebeck coefficient. As a result, on the basis of simultaneously depressed thermal conductivity induced from both Sn vacancies and SnSe₂ microdomains, maximum ZT values ∼0.9-2.2 and excellent average ZT > 1.7 among the working temperature range are achieved in Na doped SnSe crystals with 2% extrinsic SnSe₂. Our investigation illustrates new approaches on improving thermoelectric performance through introducing defect dopants, which might be well-implemented in other thermoelectric systems.

The design and growth of peanut-like CuS/BiVO4 composites for photoelectrochemical sensing

In this study, the CuS/BiVO₄-X (where X represents the mass percentage of CuS associated with CuS/BiVO₄; X = 2%, 5% and 7%) p–n heterostructures were fabricated using a two-step hydrothermal method.

Comparison between electrochemical and photoelectrochemical detection of dopamine based on titania-ceria-graphene quantum dots nanocomposite

In this study, titania-ceria-graphene quantum dot (TC-GQD) nanocomposite was synthesized by hydrothermal method for the first time. The prepared nanomaterials were characterized by XRD, FTIR dynamic light scattering (DLS), FESEM, HRTEM, and EDX spectroscopy along with elemental mapping. The synergistic effect of the nanocomposite components was studied by diffuse reflectance spectroscopy (DRS) and electrical conductivity meter. The results showed that band gap of TC-GQD nanocomposite was shifted to visible lights relative to its components (1.3 eV), and electrical conductivity of the sample was significant increased to 89.5 μS cm^-1. After chemical and physical characterization, prepared new nanocomposites were used to design a new electrochemical (EC) and photoelectrochemical (PEC) dopamine (DA) sensors. In both EC and PEC methods effecting experimental parameters were optimized. Due to the synergic effect of the nanocomposite components, an outstanding photocurrent response was observed for DA based on PEC sensor. A linear calibration curve with a lower detection limit of 22 nM DA, and sensitivity of 13.8 mA/mM_(DA), in a wider range of 0.3-750 μM DA, was obtained for TC-GQD/GCE electrode in PEC. While, the TC-GQD/GCE electrode detected DA in the range of 1-500 μM DA, with two linear calibration curve, detection limit of 0.22 μM DA, and sensitivity of 4.9 mA/mM_(DA), in the EC. Observed results from EC and PEC sensors are presented and compared.

In-Situ Observation of the Continuous Phase Transition in Determining the High Thermoelectric Performance of Polycrystalline Sn0.98Se

We report a comprehensive in-situ phase-change study on polycrystalline Sn_0.98Se via high-temperature X-ray diffraction and in-situ high-voltage transmission electron microscopy from room temperature to 843 K. The results clearly demonstrate a continuous phase transition from Pnma to Cmcm starting from 573 to 843 K, rather than a sudden transition at 800 K. We also find that the thermal-conductivity rise at high temperature after the phase transition, as commonly seen in pristine SnSe, does not occur in Sn_0.98Se, leading to a high thermoelectric figure of merit. Density functional theory calculations reveal the origin to be the suppression of bipolar thermal conduction in the Cmcm phase of Sn_0.98Se due to the enlarged bandgap. This work fills the gap of in-situ characterization on polycrystalline Sn_0.98Se and provides new insights into the outstanding thermoelectric performance of polycrystalline Sn_0.98Se.

Optical Sensors Based on II-VI Quantum Dots

Fundamentals of quantum dots (QDs) sensing phenomena show the predominance of these fluorophores over standard organic dyes, mainly because of their unique optical properties such as sharp and tunable emission spectra, high emission quantum yield and broad absorption. Moreover, they also indicate no photo bleaching and can be also grown as no blinking emitters. Due to these properties, QDs may be used e.g., for multiplex testing of the analyte by simultaneously detecting multiple or very weak signals. Physico-chemical mechanisms used for analyte detection, like analyte stimulated QDs aggregation, nonradiative Förster resonance energy transfer (FRET) exhibit a number of QDs, which can be applied in sensors. Quantum dots-based sensors find use in the detection of ions, organic compounds (e.g., proteins, sugars, volatile substances) as well as bacteria and viruses.

A photoelectrochemical sensing strategy based on single-layer MoS2 modified electrode for methionine detection

MoS₂, a typical transition metal disulfide, is widely used in the photoelectrochemical (PEC) sensor construction. In general, MoS₂ based PEC sensor are "signal-on" strategies. Surprisingly, we discovered that the PEC response of MoS₂ was quenched by methionine greatly. Based on this discovery, a reduction PEC sensing strategy utilized MoS₂ modified electrode for methionine detection was fabricated for the first time. Experimental factors, such as, bias potential, volume of MoS₂ and pH were studied. Under optimized conditions, the decreased intensity of the photocurrent signal was proportional to the logarithmic value of methionine concentrations from 0.1 nM to 1 μM with the detection limit of 0.03 nM. Moreover, this method exhibited good performance of excellent selectivity. And it showed potential applications in the practical determination of methionine in real-life sample. This strategy not only expands the PEC detection method but also provides a simple, rapid response, good selectivity and high sensitivity way to detect methionine.

Photoelectrochemical CdSe/TiO2 nanotube array microsensor for high-resolution in-situ detection of dopamine

A photoelectrochemical wire microelectrode was constructed based on the use of a TiO₂ nanotube array with electrochemically deposited CdSe semiconductor. A strongly amplified photocurrent is generated on the sensor surface. The microsensor has a response in the 0.05-20 μM dopamine (DA) concentration range and a 16.7 μM detection limit at a signal-to-noise ratio of 3. Sensitivity, recovery and reproducibility of the sensor were validated by detecting DA in spiked human urine, and satisfactory results were obtained. Graphical abstract Schematic of a sensitive photoelectrochemical microsensor based on CdSe modified TiO₂ nanotube array. The photoelectrochemical microsensor was successfully applied to the determination of dopamine in urine samples.

Integrated BiPO4 nanocrystal/BiOBr heterojunction for sensitive photoelectrochemical sensing of 4-chlorophenol

A sensor platform was constructed by using a BiPO₄ nanocrystal/BiOBr heterojunction, which displayed superior performance for monitoring 4-chlorophenol.