Immunosensor for α-fetoprotein based on a glassy carbon electrode modified with electrochemically deposited N-doped graphene, gold nanoparticles and chitosan

A novel electrochemical immunosensor that amplifies Poly(o-phenylenediamine) signal by pH-driven cascade reaction used for alpha-foetoprotein detection

The present protocol develops an electrochemical immunosensor with poly(o-phenylene diamine) attached gold nanoparticles (PPD@Au NPs) as the immune platform, polydopamine-loaded cobalt ions (Co²⁺-PDA) as the immune probe, and K₂S₂O₈ as the signal amplifying substance with pH-driven cascade reaction. The application of conventional immunosensors often leads to easy leakage of the current signal and increases the impedance due to assembly. However, this new immunosensor offers the following advantages: (1) The signal substance PPD is modified on the electrode surface, effectively reducing the signal loss and leakage of the immunosensor; (2) The pH response reduces the impedance of the immunosensor while destroying the Co²⁺-PDA secondary antibody label; (3) The pH response releases a small amount of Co²⁺, leading to SO₄^-· generation by K₂S₂O₈ through a cascade reaction, further amplifying the PPD response current signal; (4) The pH response generates excess Co²⁺ and the by-product PDA fragments can consume the SO₄^-· generated by K₂S₂O₈, so that the final response signal decreases with the increasing antigen concentration. The experimental results showed that the immunosensor exhibited good selectivity, long-term stability, and reproducibility for AFP detection in the range of 1 pg/mL-100 ng/mL, with a detection limit of 0.214 pg/mL. Interestingly, it is expected to be used for detecting AFP in actual blood samples.

Glassy Carbon Electrode Modified with N-Doped Reduced Graphene Oxide Sheets as an Effective Electrochemical Sensor for Amaranth Detection

Amaranth is one of the synthetic azo colorants used to improve the appearance and to increase the appeal of some foods and soft drinks. The excessive consumption of amaranth can be associated with health side effects, emphasizing the need to monitor this food dye. Accordingly, the present study aimed to introduce an electrochemical sensor of glassy carbon electrode (GCE) modified with N-doped reduced graphene oxide (N-rGO), N-rGO/GCE, to detect the amaranth sensitively and rapidly. Several electrochemical techniques such as differential pulse voltammetry (DPV), linear sweep voltammetry (LSV), chronoamperometry (CHA), and cyclic voltammetry (CV) are exploited for the evaluation of the efficiency of the developed electrode for the detection of amaranth. We found that N-rGO/GCE enhanced amaranth oxidation, thus significantly elevating the current signal. Amaranth showed that calibration curves ranged from 0.1 to 600.0 µM, and the limit of detection (LOD) (S/N = 3) was 0.03 μM. Finally, the developed sensor was effectively applied for real samples (tap water, apple juice, and orange juice) with acceptable recovery values from 96.0 to 104.3%.

Tuning HAuCl4/Sodium Citrate Stoichiometry to Fabricate Chitosan-Au Nanocomposites

Nanocomposite engineering of biosensors, biomaterials, and flexible electronics demand a highly tunable synthesis of precursor materials to achieve enhanced or desired properties. However, this process remains limited due to the need for proper synthesis-property strategies. Herein, we report on the ability to synthesize chitosan-gold nanocomposite thin films (CS/AuNP) with tunable properties by chemically reducing HAuCl4 in chitosan solutions and different HAuCl4/sodium citrate molar relationships. The structure, electrical, and relaxation properties of nanocomposites have been investigated as a function of HAuCl4/sodium citrate molar relation. It was shown that gold particle size, conductivity, Vogel temperature (glass transition), and water content strongly depend upon HAuCl4/sodium citrate relationships. Two relaxation processes have been observed in nanocomposites; the α-relaxation process, related to a glass transition in wet CS/AuNP films, and the σ-relaxation related to the local diffusion process of ions in a disordered system. The ability to fine-tune both α- and σ-relaxations may be exploited in the proper design of functional materials for biosensors, biomaterials, and flexible electronics applications.

Achievements of Graphene and Its Derivatives Materials on Electrochemical Drug Assays and Drug-DNA Interactions

Graphene, emerging as a true two-dimensional (2D) material, has attracted increasing attention due to its unique physical and electrochemical properties such as high surface area, excellent conductivity, high mechanical strength, and ease of functionalization and mass production. The entire scientific community recognizes the significance and potential impact of graphene. Electrochemical detection strategies have advantages such as being simple, fast, and low-cost. The use of graphene as an excellent interface for electrode modification provides a promising way to construct more sensitive and stable electrochemical (bio)sensors. The review presents sensors based on graphene and its derivatives for electrochemical drug assays from pharmaceutical dosage forms and biological samples. Future perspectives in this rapidly developing field are also discussed. In addition, the interaction of several important anticancer drug molecules with deoxyribonucleic acid (DNA) that was immobilized onto graphene-modified electrodes has been detailed in terms of dosage regulation and utility purposes.

Fabrication strategies and surface tuning of hierarchical gold nanostructures for electrochemical detection and removal of toxic pollutants

The intensive research on the synthesis and characterization of gold (Au) nanostructures has been extensively documented over the last decades. These investigations allow the researchers to understand the relationships between the intrinsic properties of Au nanostructures such as particle size, shape, morphology, and composition to synthesize the Au nano/hybrid nanostructures with novel physicochemical properties. By tuning the properties above, these nanostructures are extensively employed to detect and remove trace amounts of toxic pollutants from the environment. This review attempts to document the achievements and current progress in Au-based nanostructures, general synthetic and fabrication strategies and their utilization in electrochemical sensing and environmental remediation applications. Additionally, the applications of Au nanostructures (e.g., as adsorbents, sensing platforms, catalysts, and electrodes) and advancements in the field of electrochemical sensing of different target analytes (e.g., proteins, nucleic acids, heavy metals, small molecules, and antigens) are summarized. The literature survey concludes the existing methods for the detection of toxic contaminants at various concentration levels. Finally, the existing challenges and future research directions on electrochemical sensing and degradation of toxic contaminants using Au nanostructures are defined.

Relaxation Phenomena in Chitosan-Au Nanoparticle Thin Films

Chitosan–gold nanoparticle (CS/AuNP) thin films were synthesized through the chemical reduction of HAuCl₄ in sodium citrate/chitosan solutions. The dielectric and dynamic mechanical behaviors of CS/AuNP films have been investigated as a function of moisture and HAuCl₄ content. Two relaxation processes in the nanocomposites have been observed. The α-relaxation process is related to a glass transition in wet CS/AuNP films. However, in dry composites (with 0.2 wt% of moisture content), the glass transition vanished. A second relaxation process was observed from 70 °C to the onset of thermal degradation (160 °C) in wet films and from 33 °C to the onset of degradation in dry films. This relaxation is identified as the σ-relaxation and may be related to the local diffusion process of ions between high potential barriers in disordered systems. The α- and σ-relaxation processes are affected by the HAuCl₄ content of the solutions from which films were obtained because of the interaction between CS, sodium succinate, and gold nanoparticles. With about 0.6 mM of HAuCl₄, the conductivity of both wet and dry films sharply increased by six orders, corresponding to the percolation effect, which may be related to the appearance of a conductivity pathway between AuNPs, HAuCl₄, and NaCl.

Ultrasensitive and label free electrochemical immunosensor for detection of ROR1 as an oncofetal biomarker using gold nanoparticles assisted LDH/rGO nanocomposite

In the present article, we developed a highly sensitive label-free electrochemical immunosensor based on NiFe-layered double hydroxides (LDH)/reduced graphene oxide (rGO)/gold nanoparticles modified glassy carbon electrode for the determination of receptor tyrosine kinase-like orphan receptor (ROR)-1. In this electrochemical immunoassay platform, NiFe-LDH/rGO was used due to great electron mobility, high specific surface area and flexible structures, while Au nanoparticles were prepared and coated on the modified electrodes to improve the detection sensitivity and ROR1 antibody immobilizing (ROR1Ab). The modification procedure was approved by using cyclic voltammetry and differential pulse voltammetry based on the response of peak current to the step by step modifications. Under optimum conditions, the experimental results showed that the immunosensor revealed a sensitive response to ROR1 in the range of 0.01-1 pg mL^-1, and with a lower limit of quantification of 10 attogram/mL (10 ag mL^-1). Furthermore, the designed immunosensor was applied for the analysis of ROR1 in several serum samples of chronic lymphocytic leukemia suffering patients with acceptable results, and it also exhibited good selectivity, reproducibility and stability.

Construction of electrochemical immunosensors based on redox hydrogels for ultrasensitive detection of carcinoembryonic antigens

The introduction of cellulose nanocrystals (CNCs) endows a redox hydrogel with a larger specific surface area and better adhesion to an electrode.

Recent Trends in Electrochemical Sensors for Vital Biomedical Markers Using Hybrid Nanostructured Materials

This work provides a succinct insight into the recent developments in electrochemical quantification of vital biomedical markers using hybrid metallic composite nanostructures. After a brief introduction to the biomarkers, five types of crucial biomarkers, which require timely and periodical monitoring, are shortlisted, namely, cancer, cardiac, inflammatory, diabetic and renal biomarkers. This review emphasizes the usage and advantages of hybrid nanostructured materials as the recognition matrices toward the detection of vital biomarkers. Different transduction methods (fluorescence, electrophoresis, chemiluminescence, electrochemiluminescence, surface plasmon resonance, surface-enhanced Raman spectroscopy) reported for the biomarkers are discussed comprehensively to present an overview of the current research works. Recent advancements in the electrochemical (amperometric, voltammetric, and impedimetric) sensor systems constructed with metal nanoparticle-derived hybrid composite nanostructures toward the selective detection of chosen vital biomarkers are specifically analyzed. It describes the challenges involved and the strategies reported for the development of selective, sensitive, and disposable electrochemical biosensors with the details of fabrication, functionalization, and applications of hybrid metallic composite nanostructures.

A label-free immunosensor based on PHEMA/graphene oxide nanocomposite for simultaneous electrochemical determination of alpha fetoprotein

An electrochemical immunosensor based on poly(2-hydroxyethyl methacrylate) (PHEMA)/graphene oxide (GO) nanocomposite was designed in a simple way for the ultrasensitive detection of tumor makers (alpha-fetoprotein, AFP as a model). PHEMA with excellent biocompatibility, provides a large number of sites for connecting signal molecules. After modification with signal molecules, the functional PHEMA significantly improved the sensitivity of electrochemical detection. In order to immobilize antibodies, GO was introduced and used to construct a nanocomposite as a substrate. The designed AFP immunosensor showed favorable selectivity and excellent stability. Meanwhile, it has a low detection limit of 0.403 pg mL-1. Furthermore, the immunosensor was used to detect target AFP in human serum, demonstrating the feasibility of clinical diagnosis.

Recent development in chitosan nanocomposites for surface-based biosensor applications

Recent years have witnessed ever expanding use of biosensors in the fields of environmental monitoring, homeland security, pharmaceutical, food and bioprocessing, and agricultural industries. To produce effective and reliable biosensors, good quality immobilization of biological recognition elements is critical. Chitosan and its nanocomposites emerge as an excellent immobilization matrix on biosensor surface. As a natural polysaccharide, chitosan has many useful characteristics, such as high permeability and mechanical strength, biocompatibility and non-toxicity, availability, and low cost. Due to the presence of amino and hydroxyl groups on chitosan, chitosan can easily crosslink with a variety of nanomaterials. This investigation of chitosan nanocomposite-based biosensors presents recent development and innovations in the preparation of chitosan nanocomposites in coordination with biosensors for various bio-detection applications, including chitosan nanocomposites formed with carbon nanomaterials, various inorganic and biological complexes. These chitosan nanocomposite based biosensors have demonstrated good sensitivity selectivity and stability for the detection of different types of targets ranging from glucose, proteins, DNAs, small biomolecules to bacteria. It is in our hope that this review will offer guidance for the development of novel biosensors and open up opportunities in the field of biosensor research.

A redox cycling-amplified electrochemical immunosensor for α-fetoprotein sensitive detection via polydopamine nanolabels

A sandwich-type electrochemical immunosensor for sensitive detection of a tumor marker, α-fetoprotein (AFP), was fabricated by employing polydopamine-detection antibody nanoparticles (PDANPs-Ab2) as selective redox cycling-based signal amplifiers on an electrodeposited nano-gold electrode. In this research, PDANPs prepared through oxidative polymerization of dopamine were found to amplify the oxidation charge transfer of the electrochemical mediator (1,1'-ferrocene dimethanol, FDM), which was supported by cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS) investigation. Therefore, PDANPs were utilized as label materials of electrochemical immunosensors to enhance sensitivity for the first time. Meanwhile, the nano-gold electrode was used as a platform to accelerate electron transfer and immobilize capture antibody (Ab1). The electrochemical performance of the AFP immunosensor was investigated in PBS containing FDM with CV. Under optimal conditions, the constructed AFP immunosensor exhibited a wide linear range from 1 pg mL-1 to 50 ng mL-1 and a low detection limit of 0.3 pg mL-1, as well as excellent stability, reproducibility and selectivity. Measurements of AFP in human serum gave excellent correlation with the clinical standard Chemiluminescence Microparticle Immuno Assay (CMIA). These results indicated that the developed immunosensor may have promising application in the clinical diagnosis of AFP and other tumor markers.

Graphene and graphene oxide as a solid matrix for extraction of membrane and membrane-associated proteins

The extraction of membrane proteins remain a challenge due to innate hydrophobicity, dynamic discrepancy, and restrain effect of membrane lipids. Nanomaterials with high surface area have competency of hydrophobic-hydrophobic lipid interactions. It is shown here that both graphene and graphene oxide dissolved in solubilization buffer are viable sorbents for efficient extraction of membrane proteins. LC-MS/MS analysis further revealed that graphene (50-200 nm) and graphene oxide (50-200 nm) can enrich more kinds of membrane proteins than a commercially available kit. Graphene was further applied to the enrichment of membrane proteins of normal cells as well as cancer cells, and 1079 and 872 proteins were identified, respectively, among which 56.5% and 60.5% were membrane proteins. In particular, 241 proteins were significantly regulated in cancer cells. Gene expression of 15 proteins was verified by qRT-PCR, and 4 of them were further quantified by immunoassay. These data collectively demonstrate that graphene has great potential to improve membrane protein extractions and thus can serve downstream cancer proteomics. Graphical abstract Two dimensional carbon nanomaterials, including graphene and graphene oxide, were employed as solid matrix to avoid lipid bilayer interference and enhance the extraction efficiency of membrane and membrane associated proteins. The strategy will benefit downstream membrane proteomics analysis.