A review on micromixers actuated with magnetic nanomaterials

Advancements in enzyme immobilization on magnetic nanomaterials: toward sustainable industrial applications

Enzymes are widely used in biofuels, food, and pharmaceuticals. The immobilization of enzymes on solid supports, particularly magnetic nanomaterials, enhances their stability and catalytic activity. Magnetic nanomaterials are chosen for their versatility, large surface area, and superparamagnetic properties, which allow for easy separation and reuse in industrial processes. Researchers focus on the synthesis of appropriate nanomaterials tailored for specific purposes. Immobilization protocols are predefined and adapted to both enzymes and support requirements for optimal efficiency. This review provides a detailed exploration of the application of magnetic nanomaterials in enzyme immobilization protocols. It covers methods, challenges, advantages, and future perspectives, starting with general aspects of magnetic nanomaterials, their synthesis, and applications as matrices for solid enzyme stabilization. The discussion then delves into existing enzymatic immobilization methods on magnetic nanomaterials, highlighting advantages, challenges, and potential applications. Further sections explore the industrial use of various enzymes immobilized on these materials, the development of enzyme-based bioreactors, and prospects for these biocatalysts. In summary, this review provides a concise comparison of the use of magnetic nanomaterials for enzyme stabilization, highlighting potential industrial applications and contributing to manufacturing optimization.

Microfluidic confined acoustic streaming vortex for liposome synthesis

Liposomes have garnered significant attention owing to their favorable characteristics as promising carriers. Microfluidic based hydrodynamic flow focusing, or micro-mixing approaches enable precise control of liposome size during their synthesis due to the comparable size scale. However, current microfluidic approaches still have issues such as high flow rate dependency, complex chip structures, and ease of clogging. Herein, we present a novel microfluidic platform for size-tunable liposome synthesis based on an ultra-high-frequency acoustic resonator. By designing the shape and orientation of the acoustic resonator in the three-phase laminar flow, it combined the features of both hydrodynamic flow focusing and rapid micro-mixing. The distribution of lipid precursor solution in laminar flow and the mixing conditions could be regulated by the confined acoustic streaming vortex. We successfully synthesize liposomes with adjustable sizes and narrow size distributions. Notably, this platform regulates the product size by adjusting only the input power, which is less dependent on the flow rate. Furthermore, the vortex-like fluid flow generated along the device edge effectively prevents precipitation due to excessive lipid concentration or contact with the wall.

Machine learning-augmented fluid dynamics simulations for micromixer educational module

Micromixers play an imperative role in chemical and biomedical systems. Designing compact micromixers for laminar flows owning a low Reynolds number is more challenging than flows with higher turbulence. Machine learning models can enable the optimization of the designs and capabilities of microfluidic systems by receiving input from a training library and producing algorithms that can predict the outcomes prior to the fabrication process to minimize development cost and time. Here, an educational interactive microfluidic module is developed to enable the design of compact and efficient micromixers at low Reynolds regimes for Newtonian and non-Newtonian fluids. The optimization of Newtonian fluids designs was based on a machine learning model, which was trained by simulating and calculating the mixing index of 1890 different micromixer designs. This approach utilized a combination of six design parameters and the results as an input data set to a two-layer deep neural network with 100 nodes in each hidden layer. A trained model was achieved with R2 = 0.9543 that can be used to predict the mixing index and find the optimal parameters needed to design micromixers. Non-Newtonian fluid cases were also optimized using 56700 simulated designs with eight varying input parameters, reduced to 1890 designs, and then trained using the same deep neural network used for Newtonian fluids to obtain R2 = 0.9063. The framework was subsequently used as an interactive educational module, demonstrating a well-structured integration of technology-based modules such as using artificial intelligence in the engineering curriculum, which can highly contribute to engineering education.

Modular microfluidics for life sciences

The advancement of microfluidics has enabled numerous discoveries and technologies in life sciences. However, due to the lack of industry standards and configurability, the design and fabrication of microfluidic devices require highly skilled technicians. The diversity of microfluidic devices discourages biologists and chemists from applying this technique in their laboratories. Modular microfluidics, which integrates the standardized microfluidic modules into a whole, complex platform, brings the capability of configurability to conventional microfluidics. The exciting features, including portability, on-site deployability, and high customization motivate us to review the state-of-the-art modular microfluidics and discuss future perspectives. In this review, we first introduce the working mechanisms of the basic microfluidic modules and evaluate their feasibility as modular microfluidic components. Next, we explain the connection approaches among these microfluidic modules, and summarize the advantages of modular microfluidics over integrated microfluidics in biological applications. Finally, we discuss the challenge and future perspectives of modular microfluidics.

Magnetic micromixing for highly sensitive detection of glyphosate in tap water by colorimetric immunosensor

Glyphosate is the most widely used herbicide in the world and, in view of its toxicity, there is a quest for easy-to-use, but reliable methods to detect it in water. To address this issue, we realized a simple, rapid, and highly sensitive immunosensor based on gold coated magnetic nanoparticles (MNPs@Au) to detect glyphosate in tap water. Not only the gold shell provided a sensitive optical transduction of the biological signal - through the shift of the local surface plasmon resonance (LSPR) entailed by the nanoparticle aggregation -, but it also allowed us to use an effective photochemical immobilization technique to tether oriented antibodies straight on the nanoparticles surface. While such a feature led to aggregates in which the nanoparticles were at close proximity each other, the magnetic properties of the core offered us an efficient tool to steer the nanoparticles by a rotating magnetic field. As a result, the nanoparticle aggregation in presence of the target could take place at higher rate (enhanced diffusion) with significant improvement in sensitivity. As a matter of fact, the combination of plasmonic and magnetic properties within the same nanoparticles allowed us to realize a colorimetric biosensor with a limit of detection (LOD) of 20 ng∙L^-1.

Serpentine Micromixers Using Extensional Mixing Elements

Computational fluid dynamics modeling was used to characterize the effect of the integration of constrictions defined by the vertices of hyperbolas on the flow structure in microfluidic serpentine channels. In the new topology, the Dean flows characteristic of the pressure-driven fluid motion along curved channels are combined with elongational flows and asymmetric longitudinal eddies that develop in the constriction region. The resulting complex flow structure is characterized by folding and stretching of the fluid volumes, which can promote enhanced mixing. Optimization of the geometrical parameters defining the constriction region allows for the development of an efficient micromixer topology that shows robust enhanced performance across a broad range of Reynolds numbers from Re = 1 to 100.

Enhancing Mixing Performance in a Rotating Disk Mixing Chamber: A Quantitative Investigation of the Effect of Euler and Coriolis Forces

Lab-on-a-CD (LOCD) is gaining importance as a diagnostic platform due to being low-cost, easy-to-use, and portable. During LOCD usage, mixing and reaction are two processes that play an essential role in biochemical applications such as point-of-care diagnosis. In this paper, we numerically and experimentally investigate the effects of the Coriolis and Euler forces in the mixing chamber during the acceleration and deceleration of a rotating disk. The mixing performance is investigated under various conditions that have not been reported, such as rotational condition, chamber aspect ratio at a constant volume, and obstacle arrangement in the chamber. During disk acceleration and deceleration, the Euler force difference in the radial direction causes rotating flows, while the Coriolis force induces perpendicular vortices. Increasing the maximum rotational velocity improves the maximum rotational displacement, resulting in better mixing performance. A longer rotational period increases the interfacial area between solutions and enhances mixing. Mixing performance also improves when there is a substantial difference between Euler forces at the inner and outer radii. Furthermore, adding obstacles in the angular direction also passively promotes or inhibits mixing by configuration. This quantitative investigation provides valuable information for designing and developing high throughput and multiplexed point-of-care LOCDs.

Recent advances in acoustic microfluidics and its exemplary applications

Acoustic-based microfluidics has been widely used in recent years for fundamental research due to its simple device design, biocompatibility, and contactless operation. In this article, the basic theory, typical devices, and technical applications of acoustic microfluidics technology are summarized. First, the theory of acoustic microfluidics is introduced from the classification of acoustic waves, acoustic radiation force, and streaming flow. Then, various applications of acoustic microfluidics including sorting, mixing, atomization, trapping, patterning, and acoustothermal heating are reviewed. Finally, the development trends of acoustic microfluidics in the future were summarized and looked forward to.

Inducing AC-electroosmotic flow using electric field manipulation with insulators

Classically, the configuration of electrodes (conductors) is used as a means to determine AC-electroosmotic flow patterns. In this paper, we use the configuration of insulator materials to achieve AC-electroosmotic flow patterning in a novel approach. We apply AC electric fields between parallel electrodes situated on the top and bottom of a microfluidic channel and separated by an insulating material. Channels of various cross-sectional shapes (e.g. rectangular and parallelogram) were fabricated by shaping the insulating material between the electrodes. We found that vortex flow patterns are induced depending on the cross-sectional shape of the channel. A bell-shaped design with non-orthogonal corners gave rise to 2 vortices, whereas in a channel with a parallelogram shaped cross-section, only a single vortex was observed. The vortices were experimentally observed by analysing the 3D trajectories of fluorescent microparticles. From a theoretical analysis, we conclude that flow shaping is primarily caused by shaping the electrical field lines in the channel.

A review on acoustic field-driven micromixers

A review on acoustic field-driven micromixers is given. This is supplemented by the governing equations, governing non-dimensional parameters, numerical simulation approaches, and fabrication techniques. Acoustically induced vibration is a kind of external energy input employed in active micromixers to improve the mixing performance. An air bubble energized by an acoustic field acts as an external energy source and induces friction forces at the interface between an air bubble and liquid, leading to the formation of circulatory flows. The current review (with 200 references) evaluates different characteristics of microfluidic devices working based on acoustic field shaking.

Magnetic Nanomaterials in Chinese Medicine Chemical Composition Analysis and Drug Metabolism and Its Industry Prospect and Development Path Research

The paramagnetism and superparamagnetism of magnetic nanomaterials are very important for in vivo applications. The magnetic particles with paramagnetism or superparamagnetism can redistribute the magnetic particles after the magnetic field is withdrawn, which is widely used for the separation and purification of biomolecules. At the same time, superparamagnetic particles can also be used as MRI imaging contrast agent. Compared with Western medicine, traditional Chinese medicine is different from Western medicine in that it is originated from nature and has thousands of years of clinical efficacy. Therefore, we hope to elaborate the complex mechanism of traditional Chinese medicine through some modern technical means: through the establishment of relevant quality control system, Chinese medicine will be recognized and popularized in the international field. Therefore, this paper discusses the application of magnetic nanomaterials in the chemical composition analysis and drug metabolism of traditional Chinese medicine and its industrial prospect and development path. Firstly, the advantages of magnetic nanomaterials and the shortcomings of chemical composition analysis technology of traditional Chinese medicine are analyzed theoretically. Then, through the experimental simulation, the results show that, under the optimal conditions, the magnetic nanomaterials can be used to analyze the chemical composition of traditional Chinese medicine. The peak current and concentration of THP showed a good linear relationship in the range of 5.2 × 10−8 ∼ 2.1 × 10−5  mol/L, and the detection limit was 1.9 × 10−7  mol/L. Moreover, it showed effective results in repeatability, stability, and interference tests. Therefore, magnetic nanomaterials play an important role in the chemical composition analysis and drug metabolism of traditional Chinese medicine as well as its industrial prospect and development path.

Phase-controlled field-effect micromixing using AC electroosmosis

The exploration and application of electrokinetic techniques in micro total analysis systems have become ubiquitous in recent years, and scientists are expanding the use of such techniques in areas where comparable active or passive methods are not as successful. In this work, for the first time, we utilize the concept of AC electroosmosis to design a phase-controlled field-effect micromixer that benefits from a three-finger sinusoidally shaped electrodes. Analogous to field-effect transistor devices, the principle of operation for the proposed micromixer is governed by the source-gate and source-drain voltage potentials that are modulated by introducing a phase lag between the driving electrodes. At an optimized flow rate and biasing scheme, we demonstrate that the source, gate, and drain voltage phase relations can be configured such that the micromixer switches from an unmixed state (phase shift of 0°) to a mixed state (phase shift of 180°). High mixing efficiencies beyond 90% was achieved at a volumetric flow rate of 4 µL/min corresponding to ~13.9 mm/s at optimized voltage excitation conditions. Finally, we employed the proposed micromixer for the synthesis of nanoscale lipid-based drug delivery vesicles through the process of electrohydrodynamic-mediated nanoprecipitation. The phase-controlled electrohydrodynamic mixing utilized for the nanoprecipitation technique proved that nanoparticles of improved monodispersity and concentration can be produced when mixing efficiency is enhanced by tuning the phase shifts between electrodes.

Numerical investigations and optimized design of reaction domain of a microreactor for a two-step reaction

A two-step microreactor for the preparation of Diphenyldimethoxysilane [Formula: see text] is established. Diphenyldichlorosilane [Formula: see text] and methanol [Formula: see text] are selected as reactants. A model is created to optimize the structure of the reaction domain of the microreactor. The optimization parameters are [Formula: see text], [Formula: see text], [Formula: see text]. The concentration of the products is compared when there are obstacles in the reaction domains and non-reaction domains. The model and optimization method are helpful in the design of microreactor.

A highly integrated real-time digital PCR device for accurate DNA quantitative analysis

Misclassification of positive partitions in microfluidic digital polymerase chain reaction (dPCR) can cause the false positives and false negatives, which significantly alter the resulting estimate of target DNA molecules. To address this issue, establishing real-time fluorescence interrogation of each partition in microfluidic arrays is an effective way in which false positive and false negative partitions can be eliminated. However, currently available devices for real-time fluorescence interrogation are either not competent for microfluidic digital array, or they are bulky, expensive and entail peripheral equipment due to low integration. Therefore, in this study, a Raspberry Pi based, low-cost and highly integrated device is presented to achieve real-time fluorescence detection for microfluidic digital array, termed real-time dPCR device. In the device, uniform thermocycler, streamlined real-time fluorescence imaging setup, and compact data processing system are all integrated to undergo on-chip dPCR amplification, real-time fluorescence detection, and data analysis. Using this real-time dPCR device, the accuracy of DNA absolute quantification by dPCR is improved, since the misclassification of positive partitions is efficiently reduced based on the characteristic real-time fluorescence curves of positive partitions in a self-priming microfluidic chip. Compared with end-point dPCR on our device and commercialized QuantStudio™ 3D dPCR system, the real-time dPCR on our device exhibits a higher accuracy for DNA quantification. In addition, this real-time dPCR device is much smaller and cheaper than the commercialized Digital PCR system, but not sacrificing the capability of error correction for absolute quantitation analysis. Conclusively, this highly integrated real-time dPCR device is very beneficial for DNA quantitative analysis where the determination accuracy is pivotal.

Gravity effects on mixing with magnetic micro-convection in microfluidics

Mixing remains an important problem for the development of successful microfluidic and lab-on-a-chip devices, where simple and predictable systems are particularly interesting. One is magnetic micro-convection, an instability happening on the interface of miscible magnetic and non-magnetic fluids in a Hele-Shaw cell under applied field. Previous work proved that the Brinkman model quantitatively explains the experiments. However, a gravity-caused convective motion complicated the tests. Here we first improve the experimental system to exclude the parasitic convection. Afterwards, we experimentally observe the magnetic micro-convection, by finding and quantifying how gravity and laminar flow stabilizes the perturbations that create it. Accordingly, we improve our theoretical model for a zero-flow condition and perform a linear analysis. Two dimensionless quantities --magnetic and gravitational Rayleigh numbers-- are used to compare the experimental observations and theoretical predictions for the critical field of instability and the characteristic size of the emerging pattern. Finally, we discuss the conditions at which gravity plays an important role in microfluidic systems.

Impedimetric detection of bacteria by using a microfluidic chip and silver nanoparticle based signal enhancement

The authors describe a method that can significantly improve the performance of impedimetric detection of bacteria. A multifunctional microfluidic chip was designed consisting of interdigitated microelectrodes and a micro-mixing zone with a Tesla structure. This maximizes the coating of bacterial surfaces with nanoparticles and results in improved impedimetric detection. The method was applied to the detection of Escherichia coli O157:H7 (E. coli). Silver enhancement was accomplished by coating E.coli with the cationic polymer diallyldimethylammonium chloride (PDDA) to form positively charged E. coli/PDDA complexes. Then, gold nanoparticles (AuNPs) were added, and the resulting E. coli/PDDA/AuNPs complexes were collected at interdigitated electrodes via positive dielectrophoresis (pDEP). A silver adduct was then formed on the E. coli/PDDA/AuNP complexes by using silver enhancement solutions and by using the AuNPs as catalysts. The combination of pDEP based capture and of using silver adducts reduces impedance by increasing the conductivity of the solution and the double layer capacitance around the microelectrodes. Impedance decreases linearly in the 2 × 10³-2 × 10⁵ cfu·mL^-1 E. coli concentration range, with a 500 cfu·mL^-1 detection limit. Egg shell wash samples and tap water spiked with E. coli were successfully used for validation, and this demonstrates the practical application of this method. Graphical abstract Schematic representation of the AuNP@Ag enhancement method integrated with multifunctional microfluidic chip platform for impedimetric quantitation of bacteria. The method significantly improves the performance of impedimetric detection of bacteria.