Aptamer based voltammetric determination of ampicillin using a single-stranded DNA binding protein and DNA functionalized gold nanoparticles

Electrochemical Aptasensors for Antibiotics Detection: Recent Achievements and Applications for Monitoring Food Safety

Antibiotics are often used in human and veterinary medicine for the treatment of bacterial diseases. However, extensive use of antibiotics in agriculture can result in the contamination of common food staples such as milk. Consumption of contaminated products can cause serious illness and a rise in antibiotic resistance. Conventional methods of antibiotics detection such are microbiological assays chromatographic and mass spectroscopy methods are sensitive; however, they require qualified personnel, expensive instruments, and sample pretreatment. Biosensor technology can overcome these drawbacks. This review is focused on the recent achievements in the electrochemical biosensors based on nucleic acid aptamers for antibiotic detection. A brief explanation of conventional methods of antibiotic detection is also provided. The methods of the aptamer selection are explained, together with the approach used for the improvement of aptamer affinity by post-SELEX modification and computer modeling. The substantial focus of this review is on the explanation of the principles of the electrochemical detection of antibiotics by aptasensors and on recent achievements in the development of electrochemical aptasensors. The current trends and problems in practical applications of aptasensors are also discussed.

Recent development of antibiotic detection in food and environment: the combination of sensors and nanomaterials

In recent years, the abuse of antibiotics has led to the pollution of soil and water environment, not only poultry husbandry and food manufacturing will be influenced to different degree, but also the human body will produce antibody. The detection of antibiotic content in production and life is imperative. In this review, we provide comprehensive information about chemical sensors and biosensors for antibiotic detection. We classify the currently reported antibiotic detection technologies into chromatography, mass spectrometry, capillary electrophoresis, optical detection, and electrochemistry, introduce some representative examples for each technology, and conclude the advantages and limitations. In particular, the optical and electrochemical methods based on nanomaterials are discussed and evaluated in detail. In addition, the latest research in the detection of antibiotics by photosensitive materials is discussed. Finally, we summarize the pros and cons of various antibiotic detection methods and present a discussion and outlook on the expansion of cross-scientific areas. The synthesis and application of optoelectronic nanomaterials and aptamer screening are discussed and prospected, and the future trends and potential impact of biosensors in antibiotic detection are outlined.Graphical abstract.

Ratiometric Dual Signal-Enhancing-Based Electrochemical Biosensor for Ultrasensitive Kanamycin Detection

Based on the signal amplification elements of planar VS₂/AuNPs nanocomposites and CoFe₂O₄ nanozyme, we herein developed an electrochemical biosensor for sensitive kanamycin (Kana) quantification. A ratiometric sensing platform was presented by incorporating VS₂/AuNPs nanocomposites as a support material with excellent conductivity and high specific surface area, as well as hairpin DNA (hDNA) with complementary hybridization of biotinylated Kana-aptamer. In addition, streptavidin-functionalized CoFe₂O₄ nanozyme with superior peroxidase-like catalytic activity were immobilized onto the aptasensor, hence the peroxidase-like catalytic reaction could yield amplified electrochemical signals. With the presence of Kana, the aptamer-biorecognition resulted in a quantitative decrease of nanozyme accumulation and an increase of methylene blue response. Under optimal conditions, the electrochemical signal ratio of the aptasensor revealed a linear relation along with the logarithmic concentration of Kana from 1 pM to 1 μM, with the limit of detection reaching to 0.5 pM. Moreover, this aptasensor exhibited excellent precision, as well as high repeatability, hence possessing potentials in real samples and for diverse targets detection by easy replacement of the matched aptamer.

Electrochemical assay of ampicillin using Fe3N-Co2N nanoarray coated with molecularly imprinted polymer

Self-supported Fe₃N-Co₂N nanoarray with high electric conductivity and large surface area was prepared for growth of MIPs and further constructing a sensitive and stable electrochemical sensor. For the evaluation of its performance, Fe₃N-Co₂N is used as sensing electrode material, and AMP is used as template molecule to construct the MIP electrochemical sensor. Under the optimized conditions, the developed MIPs electrochemical sensor detects AMP with a low detection limit of 3.65 × 10^-10 mol L^-1 and shows outstanding reproducibility and stability. When the MIPs electrochemical sensor was applied to detect AMP in milk samples via standard addition method, the recovery within 97.06-102.43% with RSD of 1.05-2.11% was obtained. The fabrication of MIPs electrochemical sensor is highly promising for sensitive and selective electrochemical measurement and food safety testing. This work can provide theoretical guidance for truly challenging problems. Graphical abstract Principle diagram of MIP-EC sensor for detecting AMP Molecular imprinted polymers (MIPs) are widely performed for construction of electrochemical (EC) sensors especially for detecting small molecules in complex environment. However, the large-scale and robust preparation of MIPs in situ on sensor platform limits their practical applications. We fabricated a MIPs EC sensor based on Fe₃N-Co₂N in situ grown on carbon cloth (CC) as the substrate platform (Fe₃N-Co₂N/CC) combining with MIPs as the target recognition element for the label-free detection of AMP. Under the optimal conditions, the developed MIPs EC sensor can detect AMP with a low detection limit of 3.65 × 10^-10 mol L^-1. When the AMP in milk is detected by the proposed EC sensor, it shows ideal results. Therefore, the use of self-supported Fe₃N-Co₂N nanoarray as the platform for the fabrication of MIPs EC sensors is highly promising for sensitive and selective EC measurement and point-of-care testing.

Electrochemical aptasensors based on the gold nanostructures

Electrochemical aptasensors as novel diagnostic tools have attracted sufficient research interest in biomedical sciences. In this review, recent leading trends about gold (Au) nanostructures based electrochemical aptasensors have been collected, reviewed, and compared. Here, the considered electrochemical aptasensors were categorized based on the analytes and diagnostic techniques. Pharmaceutical analytes and biomolecules were reviewed in a separate section consisting of a variety of antibiotics, analgesics, and other biomolecules. Various aptasensors have also measured toxins, ions, and hazardous chemicals, and the findings of them have also been reviewed. Many aptasensors have been designed to detect different disease biomarkers that will play an essential role in the future of early diagnosis of diseases. Pathogen microorganisms have been considered as the analyte in several designed electrochemical aptasensors in recent researches, and their results have been reviewed and discussed as another section. Important aspects considered in the review of the mentioned aptasensors were the type of analyte, features of the aptamer as the biorecognition element, type of Au nanostructures, diagnostic technique, diagnostic mechanism, detection range and the limit of detection (LOD). In the last section, an in-depth analysis has been provided based on the crucial features of all included aptasensors.

Magnetic metal organic framework for pre-concentration of ampicillin from cow milk samples

The aim of this study is a present of a simple solvothermal synthesis approach to preparation of Cu-based magnetic metal organic framework (MMOF) and subsequently its application as sorbent for ultrasound assisted magnetic solid phase extraction (UAMSPE) of ampicillin (AMP) from cow milk samples prior to high performance liquid chromatography-Ultraviolet (HPLC-UV) determination. Characteristics of prepared MMOF were fully investigated by different techniques which showed the exclusive properties of proposed sorbent in terms of proper functionality, desirable magnetic property and also high specific surface area. Different influential factors on extraction recovery including sorbent dosage, ultrasonic time, washing solvent volume and eluent solvent volume were assessed using central composite design (CCD) based response surface methodology (RSM) as an operative and powerful optimization tool. This is the first report for determination of AMP using MMOF. The proposed method addressed some drawbacks of other methods and sorbents for determination of AMP. The presented method decreases the extraction time (4 min) and also enhances adsorption capacity (250 mg/g). Moreover, the magnetic property of presented sorbent (15 emu/g) accelerates the extraction process which does not need filtration, centrifuge and precipitation procedures. Under the optimized conditions, the proposed method is applicable for linear range of 1.0–5000.0 μg/L with detection limit of 0.29 μg/L, satisfactory recoveries (≥95.0%) and acceptable repeatability (RSD less than 4.0%). The present study indicates highly promising perspectives of MMOF for highly effective analysis of AMP in complicated matrices.

•

MMOF was prepared and used for the first time for determination of ampicillin from cow milk samples.

•

The extraction method was convenient, rapid and the MMOF can be used more than 8 times.

•

The MMOF have high specific surface area (300.0 m²/g) and high adsorption capacity (250.5 mg g⁻¹).

•

The separation time was only 5 min, which was much shorter than other reported.

An electrochemical sensing platform based on ladder-shaped DNA structure and label-free aptamer for ultrasensitive detection of ampicillin

Herein, an electrochemical aptasensor is described for detection of ampicillin (Ampi). The sensing strategy is based on the application of a ladder-shaped DNA structure as a multi-layer physical block on the surface of gold electrode. Attributing to the electrostatic repulsion and physical prevention of the ladder-shaped DNA structure, ultrasensitive detection of Ampi was achieved with a detection limit as low as 1 pM. In the presence of Ampi, the ladder-shaped DNA structure is disassembled and detached from the electrode surface. This leads to the high access of [Fe(CN)₆]^3-/4- as a redox indicator to the electrode surface and a strong redox peak. The aptasensor response for Ampi detection was in the linear range from 7 pM to 100 nM with the detection limit of 1 pM. The presented analytical strategy showed its application in detecting Ampi in the spiked milk samples with satisfactory performance. This work can be easily expanded for different targets by alternating the corresponding aptamers.

Covalent organic framework-based electrochemical aptasensors for the ultrasensitive detection of antibiotics

We designed and synthesized a novel covalent organic framework (COF) by condensation polymerization of 1,3,6,8-tetrakis(4-formylphenyl)pyrene and melamine through imine bonds (represented by Py-M-COF). The basic characterizations revealed that the Py-M-COF not only exhibited an extended π-conjugation framework, a large specific surface area (495.5 m² g^-1), big pore cavities, and nanosheet-like structure but also possessed rich functional groups, such as C˭C, C˭N, C˭O, and NH₂. These features endowed the Py-M-COF with high charge carrier mobility, further improving the strong immobilization of DNA aptamer strands via π-π stacking interaction and electrostatic interaction. As such, the Py-M-COF-based electrochemical aptasensors are ultrasensitive in detecting different antibiotics, including enrofloxacin (ENR) and ampicillin (AMP), yielding extremely low detection limits of 6.07 and 0.04 fg mL^-1 (S/N = 3) toward ENR and AMP, respectively, along with other excellent sensing performances. This biosensing platform based on Py-M-COF has potential applications for the sensitive detection of antibiotics or other analytes by replacing the corresponding aptamers.

Electrochemical surface plasmon resonance (EC-SPR) aptasensor for ampicillin detection

Surface plasmon resonance technique is highly sensitive to various processes taking place on a metal film and it has emerged as a powerful label-free method to study molecular binding processes taking place on a surface. Another important but less explored area of applications is the use of hybrid methods which combine electrochemistry with optical methods for better monitoring and understanding of biochemical processes. A detection method based on surface plasmon resonance was developed for ampicillin, applying electrochemical techniques for the elaboration and characterization of the aptasensing platform used in this study. Ampicillin is a broad-spectrum β-lactam antibiotic, used both in human and veterinary medicine for the treatment and prevention of primary respiratory, gastrointestinal, urogenital, and skin bacterial infections. It is widely used because of its broad spectrum and low cost. This widespread use can result in the presence of residues in the environment and in food leading to health problems for individuals who are hypersensitive to penicillins. The gold chip was functionalized through potential-assisted immobilization, using multipulse amperometry, first with a thiol-terminated aptamer, as a specific ligand and secondly, using the same procedure, with mercaptohexanol, used to cover the unoccupied binding sites on the gold surface in order to prevent the nonspecific adsorption of ampicillin molecules. After establishing the optimal conditions for the chip functionalization, different concentrations of ampicillin were detected in real time, in the range of 2.5-1000 μmol L^-1, with a limit of detection of 1 μmol L^-1, monitoring the surface plasmon resonance response. The selectivity of the aptasensor was proven in the presence of other antibiotics and drugs, and the method was successfully applied for the detection of ampicillin from river water. Graphical abstract ᅟ.

Applications of Gold Nanoparticles in Non-Optical Biosensors

Due to their unique properties, such as good biocompatibility, excellent conductivity, effective catalysis, high density, and high surface-to-volume ratio, gold nanoparticles (AuNPs) are widely used in the field of bioassay. Mainly, AuNPs used in optical biosensors have been described in some reviews. In this review, we highlight recent advances in AuNP-based non-optical bioassays, including piezoelectric biosensor, electrochemical biosensor, and inductively coupled plasma mass spectrometry (ICP-MS) bio-detection. Some representative examples are presented to illustrate the effect of AuNPs in non-optical bioassay and the mechanisms of AuNPs in improving detection performances are described. Finally, the review summarizes the future prospects of AuNPs in non-optical biosensors.

Novel nanoarchitecture of Co-MOF-on-TPN-COF hybrid: Ultralowly sensitive bioplatform of electrochemical aptasensor toward ampicillin

Owning to the misuse of the antibiotics in animal husbandry and agriculture, it is highly urgent to determine the quantification of antibiotics in biological systems by the simple, sensitive, and fast method. In this work, a novel nanoarchitecture of Co-based metal-organic frameworks (Co-MOF) and terephthalonitrile-based covalent organic framework (TPN-COF) was synthesized (represented by Co-MOF@TPN-COF), followed by the exploitation as the bioplatform of non-label aptasensor for detecting the most frequently used β-lactam antibiotics, ampicillin (AMP). The new porous hybrid material of Co-MOF@TPN-COF was synthesized by adding the as-prepared TPN-COF into the Co-MOF preparation system. The multilayered Co-MOF@TPN-COF nanosheets exhibit a high specific surface area (52.64 m² g^-1), nitrogen-rich groups and excellent electrochemical activity. As a result, large amounts of aptamer strands can be bound over the Co-MOF@TPN-COF nanosheets owning to the strong π-π stacking and hydrogen bonds. When detecting AMP by the electrochemical impedance spectroscopy, the fabricated Co-MOF@TPN-COF-based aptasensor exhibits an ultra-low detection limit of 0.217 fg mL^-1 within the AMP concentration from 1.0 fg mL^-1 to 2.0 ng mL^-1, which was superior to those previously reported in literatures. In addition, this proposed aptasensor also shows high selectivity, good reproducibility and stability, acceptable regenerability, and favorable applicability in human serum, river water and milk. Therefore, the proposed Co-MOF@TPN-COF-based aptasensor has a great promise to be applied as a powerful tool in the fields of food safety.

Aptamer-Based Biosensors for Antibiotic Detection: A Review

Antibiotic resistance and, accordingly, their pollution because of uncontrolled usage has emerged as a serious problem in recent years. Hence, there is an increased demand to develop robust, easy, and sensitive methods for rapid evaluation of antibiotics and their residues. Among different analytical methods, the aptamer-based biosensors (aptasensors) have attracted considerable attention because of good selectivity, specificity, and sensitivity. This review gives an overview about recently-developed aptasensors for antibiotic detection. The use of various aptamer assays to determine different groups of antibiotics, like β-lactams, aminoglycosides, anthracyclines, chloramphenicol, (fluoro)quinolones, lincosamide, tetracyclines, and sulfonamides are presented in this paper.