A glassy carbon electrode modified with poly(2,4-dinitrophenylhydrazine) for simultaneous detection of dihydroxybenzene isomers

Electrocatalytic quantification of quinol in cosmetic samples using Co-doped graphitic carbon nitride @biomolecule assisted electrochemically reduced graphene nanosheets

A bio-nanocomposite "Co-doped-g-C3N4@ biomolecule assisted electrochemically reduced graphene nanosheets (Co-g-C3N4@GNbme)" was prepared by electrochemical exfoliation of GO from graphite anode in the presence of amino acid 'l-cysteine' followed by its association with Co-g-C3N4. The preparation of material has been confirmed by characterizations with FTIR, XRD, XPS and Raman spectroscopy. The morphology was investigated with TEM and SEM. Further, Co-g-C3N4@GNbme modified GC electrode was utilized for detecting and quantifying the 'Quinol' (a skin lightning agent) in cosmetic samples electrochemically. Quinol is a fundamental constituent utilized in various industries such as pharmaceuticals, oil refineries, textiles, and dyes. In the realm of cosmetics, it is utilized as a skin-lightning agent to inhibit the production of melanin in the skin. However, prolonged use of this component often results in allergic reactions among individuals. Furthermore, the effluents discharged from its manufacturing units pose a significant threat to the environment and human health due to its slow degradation. The detection limit was calculated to be 2.4 nM (S/N = 3).

Synthesis of morphology-controlled N-doped porous carbon for simultaneous electrochemical sensing of dihydroxybenzene isomers

Different morphology of N-doped carbon materials, including three-dimensional interconnected N-doped hierarchically porous carbon networks (3D-NC), two-dimensional ultrathin porous carbon nanosheets (2D-NC), and bulk N-doped carbon with micron size (bulk-NC), was easily prepared by using NaCl crystal templates-assisted strategy. Compared with bare glassy carbon, bulk-NC, and 2D-NC, the as-synthesized 3D-NC exhibits excellent electrochemical activity toward the oxidation and sensing of three kinds of common environmental pollutants dihydroxybenzene isomers (hydroquinone (HQ), catechol (CC), and resorcinol (RS)). The impressive electrochemical activity of 3D-NC can be interpreted by its large specific surface area, continuous network-like morphology, superior electro-catalytic ability, and strong accumulation efficiency. Differential pulse voltammetry (DPV) test showed the 3D-NC-modified electrode exhibited three well-separated oxidation peaks at 0.05 V, 0.14 V, and 0.45 V vs. saturated calomel electrode (SCE) for HQ, CC, and RS, and their detection limits were evaluated to be as low as 0.0044, 0.012, and 0.016 mg L^-1, respectively. Finally, a novel electrochemical analytical platform is successfully fabricated for the simultaneous monitoring of hydroquinone, catechol, and resorcinol with high sensitivity. When used for real wastewater samples analysis, recovery ratio ranging from 94 to 108% with lower than 5% of relative standard deviation (RSD) values was achieved. This work proves a facile strategy to prepare morphology-controlled N-doped carbon-based material and demonstrates its high application potential for environmental monitoring and electrochemical analysis.

Sensitive Non-Enzymatic Glucose Electrochemical Sensor Based on Electrochemically Synthesized PANI/Bimetallic Oxide Composite

The development of a sensitive glucose monitoring system is highly important to protect human lives as high blood-glucose level-related diseases continue to rise globally. In this study, a glucose sensor based on polyaniline-bimetallic oxide (PANI-MnBaO₂) was reported. PANI-MnBaO₂ was electrochemically synthesized on the glassy carbon electrode (GCE) surface. The as-prepared PANI-MnBaO₂ was characterized by field emission scanning electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. Glucose sensing on PANI-MnBaO₂ is based on the electrocatalytic oxidation of glucose to the glucolactone, which gives oxidation current. The oxidation potential for glucose was 0.83 V, with a limit of detection of 0.06 µM in the linear and in the concentration range of 0.05 µM–1.6 mM. The generated current densities displayed excellent stability in terms of repeatability and reproducibility with fast response. The development of a sensitive glucose sensor as obtained in the current study would ensure human health safety and protection through timely and accurate glucose detection and monitoring.

Real time detection and monitoring of 2, 4-dinitrophenylhydrazine in industrial effluents and water bodies by electrochemical approach based on novel conductive polymeric composite

Much attention has been given to detection and monitoring of hydrazine-based compounds in recent time because of its significant negative impacts on human health and ecosystem (aquatic lives). This prompted the current study focusing on detection of 2, 4-dinitrophenylhydrazine (2, 4-dnphz) using electrochemically synthesized poly-para amino benzoic acid-manganese oxide (P-pABA-MnO₂) composite film. The synthesized P-pABA-MnO₂ composite film was characterized in terms of its structural and morphological properties by X-ray diffraction spectroscopy and field emission scanning electron microscopy respectively. In addition, functionalities and binding energy of p-PABA-MnO2 were confirmed using Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy respectively. Finally, electrochemical properties were investigated using electrochemical impedance spectroscopy and cyclic voltammetry. The synthesized P-pABA-MnO₂ displayed good electrocatalytic reduction property towards 2, 4-dnphz with ultra-low limit of detection (0.08 μM; S/N = 3) and very high sensitivity (52 μAμ^-1Mcm^-2). The proposed sensor based on P-pABA-MnO₂ also demonstrated good stability in terms of repeatability, reproducibility and interferents effects. Lastly, the proposed sensor was satisfactorily used in detection of 2, 4-dnphz in environmental real samples.

A highly sensitive poly(chrysoidine G)-gold nanoparticle composite based nitrite sensor for food safety applications

This work demonstrated the development of conducting poly(chrysoidine G) (PCG)-gold nanoparticle (AuNP)-modified fluorine-doped tin oxide (F : SnO₂, FTO) film-coated glass electrodes for the sensitive electrochemical detection of nitrite (NO₂^-). The homogeneously distributed PCG nanoparticle layer was deposited onto the FTO electrode by cyclic voltammetry sweeping. AuNPs were then anchored onto the PCG/FTO electrode by the chemical reduction of pre-adsorbed Au³⁺ ions. The as-prepared AuNP/PCG/FTO electrode exhibited excellent electrocatalytic activity for the oxidation of NO₂^- with high sensitivity (approximately 0.63 μA cm^-2μM^-1) and a low limit of detection (0.095 μM), which is relevant within the normal concentration range of NO₂^- in human bodily fluids. The AuNP/PCG/FTO sensor showed sufficient reproducibility, repeatability, low interference, and strong recovery for NO₂^- detection in food samples. These results indicate that the AuNP/PCG nanocomposites have immense potential for the electrochemical detection of other biologically important compounds.

A novel Fe-hemin-metal organic frameworks supported on chitosan-reduced graphene oxide for real-time monitoring of H2O2 released from living cells

Herein, a kind of novel hemin-based metal organic frameworks (Fe-hemin-MOFs) with unique peroxidase-like bioactivity was developed for the first time. The synthesized Fe-hemin-MOFs exhibited satisfactory catalytic activity toward hydrogen peroxide (H₂O₂). When it was further supported on Chitosan-reduced graphene oxide (CS-rGO), amplified electrochemical signal could be obtained. The Fe-hemin-MOFs/CS-rGO composite was used to construct a novel H₂O₂ electrochemical sensor. The electrocatalytic reduction of H₂O₂ displayed two segments linearity range from 1 to 61 μM and 61-1311 μM, as well as a low detection limit of 0.57 μM. Furthermore, the proposed sensor was successfully used for real-time monitoring of H₂O₂ released from living cells, which extended the practical application of MOFs-based sensors in monitoring the pathological process in living cells.

Prussian blue-doped nanosized polyaniline for electrochemical detection of benzenediol isomers

Simultaneous speciation of benzenediol isomers (BDIs), 1,2-benzenediol (catechol, CC), 1,3-benzenediol (resorcinol, RS), and 1,4-benzenediol (hydroquinone, HQ), was investigated by differential pulse voltammetry (DPV) using a graphite paste electrode (GPE) modified with Prussian blue-polyaniline nanocomposite. The modified GPE showed good stability, sensitivity, and selectivity properties for all the three BDIs. Prussian blue-doped nanosized polyaniline (PBNS-PANI) was synthesized first by using mechanochemical reactions between aniline and ferric chloride hexahydrate as the oxidants and then followed by the addition of potassium hexacyanoferrate(II) in a solid-state and template-free technique. The material was characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). The DPV measurements are performed in phosphate electrolyte solution with pH 4.0 at a potential range of - 0.1 to 1.0 V. The proposed modified electrode displayed a strong, stable, and continuous three well-separated oxidation peaks towards electrooxidation at potentials 0.20, 0.31, and 0.76 V for HQ, CC, and RS, respectively. The calibration curves were linear from 1 to 350.5 μM for both HQ and CC, while for RS, it was from 2 to 350.5 μM. The limit of detection was determined to be 0.18, 0.01, and 0.02 μM for HQ, CC, and RS, respectively. The analytical performance of the PBNS-PANI/GPE has been evaluated for simultaneous determination of HQ, CC, and RS in creek water, commercial hair dye, and skin whitening cream samples with satisfactory recoveries between 90 and 106%. Overall, we demonstrated that the presence of NS-PANI and PB resulted in a large redox-active surface area that enabled a promising analytical platform for simultaneous detection of BDIs. Graphical abstract.

An Electrochemical Immunosensor Based on a Self-Assembled Monolayer Modified Electrode for Label-Free Detection of α-Synuclein

This research demonstrated the development of a simple, cost-effective, and label-free immunosensor for the detection of α-synuclein (α-Syn) based on a cystamine (CYS) self-assembled monolayer (SAM) decorated fluorine-doped tin oxide (FTO) electrode. CYS-SAM was formed onto the FTO electrode by the adsorption of CYS molecules through the head sulfur groups. The free amine (–NH₂) groups at the tail of the CYS-SAM enabled the immobilization of anti-α-Syn-antibody, which concurrently allowed the formation of immunocomplex by covalent bonding with α-Syn-antigen. The variation of the concentrations of the attached α-Syn at the immunosensor probe induced the alternation of the current and the charge transfer resistance (R_ct) for the redox response of [Fe(CN)₆]^3−/4−, which displayed a linear dynamic range from 10 to 1000 ng/mL with a low detection limit (S/N = 3) of ca. 3.62 and 1.13 ng/mL in differential pulse voltammetry (DPV) and electrochemical impedance spectra (EIS) measurements, respectively. The immunosensor displayed good reproducibility, anti-interference ability, and good recoveries of α-Syn detection in diluted human serum samples. The proposed immunosensor is a promising platform to detect α-Syn for the early diagnose of Parkinson’s disease, which can be extended for the determination of other biologically important biomarkers.

Sensitive and Simultaneous Determination of Hydroquinone and Catechol in Water Using an Anodized Glassy Carbon Electrode with Polymerized 2-(Phenylazo) Chromotropic Acid

Hydroquinone (HQ) and catechol (CT) are considered as environmental pollutants with high toxicity. We have developed a simple electrochemical sensor using an anodized glassy carbon electrode modified with a stable 2-(phenylazo) chromotropic acid- (CH-) conducting polymer (PCH/AGCE). The PCH/AGCE sensor showed good electrocatalytic activity and reversibility towards the redox of HQ and CT in phosphate buffer solution (PBS, pH 7.0). The cyclic voltammetry (CV) in mixed solution of HQ and CT showed that the oxidation peaks of them became well resolved with a peak separation of 0.1 V. The detection limits of HQ and CT were 0.044 and 0.066 μM, respectively, in a wide linear response range of 1–300 μM for both. Moreover, the sensor displayed an excellent selectivity in the presence of common interferences. This study provided a simple, sensitive, and high recovery method for simultaneous and quantitative determination of HQ and CT in aqueous medium.

Simple, low-cost, sensitive and label-free aptasensor for the detection of cardiac troponin I based on a gold nanoparticles modified titanium foil

This research demonstrated the electrochemical modification of low-cost titanium (Ti) metal substrate with gold nanoparticles (AuNPs) for the aptamer-based detection of cardiac troponin I (cTnI). AuNPs were deposited onto Ti sheets by the potential-step deposition method with high density and homogeneity as well as good crystallinity. It was then applied as a transducer to immobilize a thiol-functionalized DNA aptamer via the self-assembled monolayer mechanism for the specific binding of cTnI. This was verified through electrochemical and morphological analyses. The aptasensor could detect cTnI in a linear range of 1-1100 pM with a detection limit of ca. 0.18 pM. The aptasensor showed high sensitivity and specificity to cTnI over other interfering compounds with good recoveries in the diluted human serum samples.