A composite consisting of microporous carbon and cobalt(III) oxide and prepared from zeolitic imidazolate framework-67 for voltammetric determination of ascorbic acid

Solid-Phase Extraction of Aristolochic Acid I from Natural Plant Using Dual Ionic Liquid-Immobilized ZIF-67 as Sorbent

(1) Background: ZIF-67 is one of the most intriguing metal–organic frameworks already applied in liquid adsorption. To increase its adsorption performance, dual ionic liquids were immobilized on ZIF-67 in this research; (2) Methods: The obtained sorbent was used to adsorb aristolochic acid I (AAI) in standard solutions. Then, the sorbent was applied in solid-phase extraction to remove AAI from Fibraurea Recisa Pierre extracted solution. (3) Results: By analyzing the adsorption models, the highest adsorption capacity of immobilized sorbent (50.9 mg/g) was obtained at 25 °C within 120 min. In the SPE process, 0.02 mg of AAI was removed per gram of herbal plant, the adequate recoveries were in the range of 96.2–100.0%, and RSDs were 3.5–4.0%; (4) Conclusions: The provided experimental data revealed that ZIF-67@EIM-MIM was an excellent potential sorbent to adsorb and remove AAI from herbal plant extract, and the successful separation indicated that this sorbent could be an ideal material for the pretreatment of herbal plants containing AAI.

Zeolitic imidazolate frameworks for use in electrochemical and optical chemical sensing and biosensing: a review

This review (with 145 refs.) summarizes the progress that has been made in the use of zeolitic imidazolate frameworks in chemical sensing and biosensing. Zeolitic imidazolate frameworks (ZIFs) are a type of porous material with zeolite topological structure that combine the advantages of zeolite and traditional metal-organic frameworks. Owing to the structural flexibility of ZIFs, their pore sizes and surface functionalization can be reasonably designed. Following an introduction into the field of metal-organic frameworks and the zeolitic imidazolate framework (ZIF) subclass, a first large section covers the various kinds and properties of ZIFs. The next large section covers electrochemical sensors and assays (with subsections on methods for gases, electrochemiluminescence, electrochemical biomolecules). This is followed by main sections on ZIF-based colorimetric and luminescent sensors, with subsections on sensors for metal ions and anions, for gases, and for organic biomolecules. The last section covers SERS-based assays. Several tables are presented that give an overview on the wealth of methods and materials. A concluding section summarizes the current status, addresses current challenges, and gives an outlook on potential future trends. Graphical abstract In recent years, ZIFs and their composites have been widely used as probes in chemical sensing, and these probes have shown great advantages over other materials. This review describes the current progress on ZIFs toward electrochemical, luminescence, colorimetric, and SERS-based sensing applications, highlighting the different strategies for designing ZIFs and their composites and potential challenges in this field.

Gold nanorods decorated with graphene oxide and multi-walled carbon nanotubes for trace level voltammetric determination of ascorbic acid

An ultra-sensitive sensor is described for the voltammetric determination of ascorbic acid (AA). A glassy carbon electrode (GCE) was modified with graphene oxide (GO), multi-walled carbon nanotubes (MWCNTs) and gold nanorods (AuNRs). GO was used to prevent the aggregation of MWCNTs. The integration of positively charged AuNRs reduces the overpotential and increases the peak current of AA oxidation. Figures of merit of this sensor, typically operated at a low working potential of 0.036 V (vs. Ag/AgCl), include a low detection limit (0.85 nM), high sensitivity (7.61 μA·μM^-1·cm^-2) and two wide linear ranges (from 1 nM to 0.5 μM and from 1 μM to 8 mM). The use of GO simplifies the manufacture and results in a highly reproducible and stable sensor. It was applied to the quantification of AA in spiked serum. Graphical abstract Graphical abstract contains poor quality and small text inside the artwork. Please do not re-use the file that we have rejected or attempt to increase its resolution and re-save. It is originally poor, therefore, increasing the resolution will not solve the quality problem. We suggest that you provide us the original format. We prefer replacement figures containing vector/editable objects rather than embedded images. Preferred file formats are eps, ai, tiff and pdf.We have provided the original format with the attachments named g.tif. Graphene oxide (GO) in combination with multiwalled carbon nanotubes (MWCNTs) and gold nanorods (AuNRs) were used to construct a sensing interface with outstanding electrocatalytic performance for ascorbic acid detection.