Computer-aided design of magnetic dummy molecularly imprinted polymers for solid-phase extraction of ten phthalates from food prior to their determination by GC-MS/MS

Current trends of functional monomers and cross linkers used to produce molecularly imprinted polymers for food analysis

Molecularly imprinted polymers (MIPs) as artificial synthetic receptors are in high demand for food analysis due to their inherent molecular recognition abilities. It is common practice to employ functional monomers with basic or acidic groups that can interact with analyte molecules via hydrogen bonds, covalent bonds, and other interactions (π-π, dipole-ion, hydrophobic, and Van der Waals). Therefore, selecting the appropriate functional monomer and cross-linker is crucial for determining how precisely they interact with the template and developing the polymeric network's three-dimensional structure. This study summarizes the advancements made in MIP's functional monomers and cross-linkers for food analysis from 2018 to 2023. The subsequent computational design of MIP has been thoroughly explained. The discussion has concluded with a look at the difficulties and prospects for MIP in food analysis.

Computational simulation-assisted design and experimental verification of molecularly imprinted polymers for selective extraction of chlorogenic acid

Chlorogenic acid (CGA) is an active ingredient in honeysuckle with a broad-spectrum of antibacterial activity, suppressing tumor growth and other pharmacological effects. However, it is susceptible to damage during traditional extraction and separation processes. Therefore, developing selective and efficient extraction methods of CGA is essential. Based on computational molecular simulations, a reliable and efficient molecularly imprinted polymers (MIPs) were successfully developed for selective extraction of CGA. MIPs and non-molecularly imprinted polymers (NIPs) were synthesized using a precipitation polymerization method, employing three different functional monomers: [methacrylic acid (MAA), 4-vinylpyridine (4-VP), and methyl methacrylate (MMA)], with CGA serving as the template molecule. To simulate the polymers and predict the optimal ratio between the template and functional monomer, the computational studies and adsorption performance experiments were carried out. The adsorption characteristics and thermal stability of polymers were evaluated by isothermal adsorption, adsorption kinetics, selective adsorption and thermogravimetric analysis, aiming to obtain the MIPs with specific recognition and selectivity for CGA. When the molar ratio of template CGA to functional monomer 4-VP was 1:8, the prepared MIPs was found to have the maximum adsorption capacity (14.85 mg g-1) and the highest imprinting factor (1.74) at the CGA concentration of 100 mg L-1. These results were consistent with those obtained by computational molecular simulation. This study not only provides good guidance for developing separation materials for extracting CGA from natural plants but also inspires the application of computer simulation and molecular docking techniques in the preparation of specific MIPs materials.

A Review of the Analysis of Phthalates by Gas Chromatography in Aqueous and Food Matrices

As a commonly well-known industrial chemical, phthalates are produced in high volumes to be used in various consumer products (e.g., plasticizers, medical devices, construction materials, and toys) to enhance softness, durability, transparency, and flexibility. Phthalates are generally not chemically bonded to the polymer chain of the plastic in which they are mixed. Thus, they may leach, migrate, or evaporate into indoor/outdoor air, and foodstuffs. In this review, a comprehensive overview of several sample preparation methods coupled with gas chromatography for the analysis of phthalates in various kinds of complex matrices, with a focus on the last 20 years' worth of papers. The review begins by highlighting the environmental significance of phthalate pollution along with the various routes to their exposure to general population. Then, the discussion is extended to cover the pretreatment and extraction techniques for phthalates for their quantitation based on gas chromatographic approach. Finally, the present and future challenges for the detection of phthalates in aqueous and food matrices are discussed.

Current Sample Preparation Methods and Determination Techniques for the Determination of Phthalic Acid Ester Plasticizers in Edible Oils

In the process of production, processing, transportation, and storage of edible oils, the oils inevitably come into contact with plastic products. As a result, plasticizers migrate into edible oils, are harmful to human health, and can exhibit reproductive toxicity. Therefore, the determination of plasticizers in edible oils is very important, and a series of sample preparation methods and determination techniques have been developed for the determination of plasticizers in edible oils. Phthalic acid ester (PAE) plasticizers are the most widely used among all plasticizers. This review aims to provide a comprehensive overview of the sample preparation methods and detection techniques reported for the determination of PAEs in edible oils since 2010, focusing on sample preparation methods of edible oils combined with various separation-based analytical techniques, such as gas chromatography (GC) and liquid chromatography (LC) with different detectors. Furthermore, the advantages, disadvantages, and limitations of these techniques as well as the prospective future developments are also discussed.

A Novel Electrochemical Sensor Modified with a Computer-Simulative Magnetic Ion-Imprinted Membrane for Identification of Uranyl Ion

In this paper, a novel ion-imprinted electrochemical sensor modified with magnetic nanomaterial Fe₃O₄@SiO₂ was established for the high sensitivity and selectivity determination of UO₂²⁺ in the environment. Density functional theory (DFT) was employed to investigate the interaction between templates and binding ligands to screen out suitable functional binding ligand for the reasonable design of the ion imprinted sensors. The MIIP/MCPE (magnetic ion imprinted membrane/magnetic carbon paste electrode) modified with Fe₃O₄@SiO₂ exhibited a strong response current and high sensitivity toward uranyl ion comparison with the bare carbon paste electrodes. Meanwhile, the MCPE was fabricated simultaneously under the action of strong magnetic adsorption, and the ion imprinted membrane can be adsorbed stably on the electrode surface, handling the problem that the imprinted membrane was easy to fall off during the process of experimental determination and elution. Based on the uranyl ion imprinting network, differential pulse voltammetry (DPV) was adopted for the detection technology to realize the electrochemical reduction of uranyl ions, which improved the selectivity of the sensor. Thereafter, uranyl ions were detected in the linear concentration range of 1.0 × 10⁻⁹ mol L⁻¹ to 2.0 × 10⁻⁷ mol L⁻¹, with the detection and quantification limit of 1.08 × 10⁻⁹ and 3.23 × 10⁻¹⁰ mol L⁻¹, respectively. In addition, the sensor was successfully demonstrated for the determination of uranyl ions in uranium tailings soil samples and water samples with a recovery of 95% to 104%.

A new core–shell magnetic mesoporous surface molecularly imprinted composite and its application as an MSPE sorbent for determination of phthalate esters

In this study, a new core–shell magnetic mesoporous surface molecularly imprinted polymer (Fe₃O₄@SiO₂@mSiO₂-MIPs) which has specific adsorption and rapid adsorption rate for phthalate esters (PAEs) was prepared by a convenient method. Based on this composite as a magnetic solid phase extraction (MSPE) material, a rapid, efficient and sensitive matrix dispersion magnetic solid-phase extraction gas chromatography-mass spectrometry method (DMSPE-GC/MS) was developed for the determination of PAEs in multiple liquid samples. It is the first time that Fe₃O₄@SiO₂@mSiO₂-MIPs have been prepared by bonding amino groups on the surface of a double layer silicon substrate with diisononyl phthalate (DINP) as virtual template and 3-(2-aminoethyl)-aminopropyl trimethoxymethylsilane (TSD) as functional monomer. FT-IR, TEM, EDS, SEM, XRD, BET and VSM were used to characterize the composite. The adsorption isotherm and kinetics of Fe₃O₄@SiO₂@mSiO₂-MIPs showed that it possessed fast adsorption rates (approximately 5 min to reach equilibrium), high adsorption capacities (523.9 mg g⁻¹) and good recognition of PAEs. The real samples were preconcentrated by Fe₃O₄@SiO₂@mSiO₂-MIPs, under the optimum DMSPE-GC/MS conditions. Validation experiments showed that the method presented good linearity (R² > 0.9971), satisfactory precision (RSD < 5.7%) and high recovery (92.1–105.8%), and the limits of detection ranged from 1.17 ng L⁻¹ to 3.03 ng L⁻¹. The results indicated that the novel method had good sensitivity, high efficiency and wide sample application and was suitable for the determination of PAEs in liquid drink samples such as water, alcohol, beverages and so on.

A new core–shell magnetic mesoporous surface molecularly imprinted polymer (Fe3O4@SiO2@mSiO2-MIPs) which has specific adsorption for phthalate esters was synthesized by a facile and convenient method.

Comprehensive Strategy for Sample Preparation for the Analysis of Food Contaminants and Residues by GC-MS/MS: A Review of Recent Research Trends

Food safety and quality have been gaining increasing attention in recent years. Gas chromatography coupled to tandem mass spectrometry (GC-MS/MS), a highly sensitive technique, is gradually being preferred to GC-MS in food safety laboratories since it provides a greater degree of separation on contaminants. In the analysis of food contaminants, sample preparation steps are crucial. The extraction of multiple target analytes simultaneously has become a new trend. Thus, multi-residue analytical methods, such as QuEChERs and adsorption extraction, are fast, simple, cheap, effective, robust, and safe. The number of microorganic contaminants has been increasing worldwide in recent years and are considered contaminants of emerging concern. High separation in MS/MS might be, in certain cases, favored to sample preparation selectivity. The ideal sample extraction procedure and purification method should take into account the contaminants of interest. Moreover, these methods should cooperate with high-resolution MS, and other sensitive full scan MSs that can produce a more comprehensive detection of contaminants in foods. In this review, we discuss the most recent trends in preparation methods for highly effective detection and analysis of food contaminants, which can be considered tools in the control of food quality and safety.

The Use of Computational Methods for the Development of Molecularly Imprinted Polymers

Recent years have witnessed a dramatic increase in the use of theoretical and computational approaches in the study and development of molecular imprinting systems. These tools are being used to either improve understanding of the mechanisms underlying the function of molecular imprinting systems or for the design of new systems. Here, we present an overview of the literature describing the application of theoretical and computational techniques to the different stages of the molecular imprinting process (pre-polymerization mixture, polymerization process and ligand-molecularly imprinted polymer rebinding), along with an analysis of trends within and the current status of this aspect of the molecular imprinting field.

Molecularly Imprinted Polymers for Dispersive (Micro)Solid Phase Extraction: A Review

The review describes the development of batch solid phase extraction procedures based on dispersive (micro)solid phase extraction with molecularly imprinted polymers (MIPs) and magnetic MIPs (MMIPs). Advantages and disadvantages of the various MIPs for dispersive solid phase extraction and dispersive (micro)solid phase extraction are discussed. In addition, an effort has also been made to condense the information regarding MMIPs since there are a great variety of supports (magnetite and magnetite composites with carbon nanotubes, graphene oxide, or organic metal framework) and magnetite surface functionalization mechanisms for enhancing MIP synthesis, including reversible addition-fragmentation chain-transfer (RAFT) polymerization. Finally, drawbacks and future prospects for improving molecularly imprinted (micro)solid phase extraction (MIMSPE) are also appraised.

Selective recognition and enrichment of sterigmatocystin in wheat by thermo-responsive imprinted polymer based on magnetic halloysite nanotubes

Two thermo-responsive molecularly imprinted polymers (MHNTs@MIP and MCNTs@MIP) for the selective extraction of sterigmatocystin have been prepared on the surface of the magnetic halloysite nanotubes (MHNTs) and magnetic carbon nanotubes (MCNTs), respectively. 1, 8-dihydroxyanthraquinone, n-isopropyl acrylamide, methacrylic acid, ethylene dimethacrylate and dimethyl sulfoxide were used as the dummy template, thermo-sensitive functional monomer, co-monomer, cross-linker and porogen, respectively. The magnetic properties, adsorption properties as well as the temperature responsive behaviors of MHNTs@MIP and MCNTs@MIP were systematically studied and compared for the first time. Enough saturation magnetizations of MHNTs@MIP (9.42 emu/g) and MCNTs@MIP (10.54 emu/g) were obtained. MHNTs@MIP and MCNTs@MIP also showed controllable adsorption and release behaviors to sterigmatocystin in response to the temperature change (35 °C and 20 °C). Compared with MCNTs@MIP, MHNTs@MIP had higher adsorption affinity (K_L = 0.120 L/mg), higher adsorption kinetic (K₂ = 0.0100 g/(mg•min)) and higher imprinting factor (5.22) to sterigmatocystin. These results indicated that MHNTs@MIP was favorable adsorbent for the selective separation of sterigmatocystin. Furthermore, the elution conditions of MHNTs@MIP were optimized by response surface methodology. Under the optimal conditions, MHNTs@MIP coupled with high performance liquid chromatography were successfully applied to the selective recognition, purification, enrichment and detection of sterigmatocystin in wheat samples. The recoveries were calculated from 88.62% to 102.9% with RSDs less than 3.5 % and limit of detection of 1.1 μg/kg. This work provided a suitable carrier for the preparation of imprinted polymers and a practical approach for highly selective recognition and determination of analytes in real samples.

A highly sensitive sensor based on a computer-designed magnetic molecularly imprinted membrane for the determination of acetaminophen

In this paper, a sensor based on a magnetic surface molecularly imprinted membrane (MMIP) was prepared for the highly sensitive and selective determination of acetaminophen (AP). Before the experiment, the appropriate functional monomers and solvents required for the polymer were screened, and the molecular electrostatic potentials (MEPs) were calculated by the DFT/B3LYP/6-31 + G method. MMIP with high recognition of AP was synthesized based on Fe₃O₄@SiO₂nanoparticles (NPs) with excellent core-shell structure. Next, a carbon paste electrode (CPE) was filled with a piece of neodymium-iron-boron magnet to make magnetic electrode (MCPE), and MMIP/MCPE sensor was obtained by attaching a printed polymer to the surface of the electrode under the strong magnetic. Due to the stable molecular structure of the electrode surface, the sensor is highly effective and accurate for detection of AP using DPV. The DPV response of the sensor exhibited a linear dependence on the concentration of AP from 6 × 10^-8 to 5 × 10^-5 mol L^-1 and 5 × 10^-5 to 2 × 10^-4 mol L^-1, with a detection limit based on the lower linear range of 1.73 × 10^-8 mol L^-1(S/N = 3). When used for determination of AP in actual samples, the recovery of the sensor to the sample was 95.80-103.76%, and the RSD was 0.78%-3.05%.

Electrochemical Sensing of α-Fetoprotein Based on Molecularly Imprinted Polymerized Ionic Liquid Film on a Gold Nanoparticle Modified Electrode Surface

A molecularly imprinted sensor was fabricated for alpha-fetoprotein (AFP) using an ionic liquid as a functional monomer. Ionic liquid possesses many excellent characteristics which can improve the sensing performances of the imprinted electrochemical sensor. To demonstrate this purpose, 1-[3-(N-cystamine)propyl]-3-vinylimidazolium tetrafluoroborate ionic liquid [(Cys)VIMBF₄] was synthesized and used as a functional monomer to fabricate an AFP imprinted polymerized ionic liquid film on a gold nanoparticle modified glassy carbon electrode (GCE) surface at room temperature. After removing the AFP template, a molecularly imprinted electrochemical sensor was successfully prepared. The molecularly imprinted sensor exhibits excellent selectivity towards AFP, and can be used for sensitive determination of AFP. Under the optimized conditions, the imprinted sensor shows a good linear response to AFP in the concentration range of 0.03 ng mL⁻¹~5 ng mL⁻¹. The detection limit is estimated to be 2 pg mL⁻¹.