Simultaneous voltammetric sensing of acetaminophen, epinephrine and melatonin using a carbon paste electrode modified with zinc ferrite nanoparticles

Oatmeal-derived carbon loaded with Pt nanoparticles using a "two-fold benefit approach" for sensitive detection of the biomolecule adrenaline

In this study, we innovatively synthesized nitrogen-doped carbon microspheres (NCS) derived from oatmeal. By utilizing polyoxometalates (POM) as both reducing and linking agents, we achieved uniform loading of platinum nanoparticles (Pt NPs) onto the surface of the NCS. The composite nanoparticles constructed from Pt/polyoxometalate/nitrogen-doped carbon microspheres (Pt/POM/NCS) fully exploit the synergistic catalytic effect, demonstrating superior performance in adrenaline detection. The method has a linear range of 2.59 to 1109.59 μM, a detection limit as low as 0.25 μM (S/N = 3), and a sensitivity of 0.74 μA μM-1 cm-2. Additionally, it exhibits high stability and strong anti-interference ability. The recoveries in human serum were 98.51 % to 101.25 %.

Cubic structured zinc ferrite methodically incorporated into porous graphene sheets as a selective Electrocatalyst for electrochemical detection of Carbendazim

Carbendazim (CBZ) insecticides have been widely employed, raising serious concerns about their impacts on human health and the environment. A facile hydrothermal technique was used to prepare a zinc ferrite (ZnFe₂O₄) combined with porous graphene oxide (PGO) as a nanocomposite for selective CBZ detection. The ZnFe₂O₄/PGO nanocomposite was then used to modify a glassy carbon electrode (GCE), an affordable platform for CBZ detection. Various spectroscopic techniques were employed to confirm the nanomaterial. The electrochemical properties were further investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). The ZnFe₂O₄/PGO nanocomposite modified the glassy carbon electrode surface for CBZ detection. A broad linear response range of 0.0039 to 200 μM, high sensitivity (2.184 μAμM-1 cm-2), a low detection limit of 0.0013 μM, outstanding stability, repeatability, and practical applicability are the intriguing qualities of the ZnFe₂O₄/PGO-modified electrode for CBZ detection.

Ratiometric fluorescent sensing of melatonin based on inner filter effect and smartphone established detection

Melatonin (MLT) is a crucial neurohormone having inhibitory effects over various types of cancer. In this work, 3,6-Diaminocarbazole (DAC), a fluorescent probe is utilized to detect MLT in a highly sensitive, selective and facile way. The unique feature of present work is that MLT is sensed by ratiometric fluorescent technique based on the inner filter effect (IFE) using DAC at an emission wavelength of 310 nm. As a result, a noticeable change in color from red to cyan is observed and the quantitative analysis of fluorescence signals at these wavelengths are used to detect MLT observing a linear relationship between the ratio of emission intensities and the concentration of MLT over a linear range of 0 to 78 μM. DAC can accurately measure the detailed quantity of MLT with a limit of detection of 30 nM and has proved to be an efficient sensing probe due to its excellent molar absorptivity and high photoluminescence quantum yield (PLQY). Sensing characterization was carried out UV-Vis, steady-state, and time- resolved fluorescence spectroscopic techniques. The smartphone app "RGB colour detector" value has been successfully linked with the considerable detectable color changes of DAC on addition of MLT. HOMO-LUMO have been calculated using DFT with B3LYP/6-31G(d,p) level and band gaps of 3.77 eV and 4.91 eV were found for DAC and MLT, respectively. Electrons are not allowed energetically to transfer from MLT to DAC, as is evident from their band gaps. Therefore, IFE can be considered the foremost method in fluorescence quenching of present investigation. The developed sensor was verified by spiking of MLT in human serum.

Ruthenium-Anchored Carbon Sphere-Customized Sensor for the Selective Amperometric Detection of Melatonin

Melatonin (MT), a pineal gland hormone, regulates the sleep/wake cycle and is a potential biomarker for neurodegenerative disorders, depression, hypertension, and several cancers, including prostate cancer and hepatocarcinoma. The amperometric detection of MT was achieved using a sensor customized with ruthenium-incorporated carbon spheres (Ru-CS), possessing C- and O-rich catalytically active Ru surfaces. The non-covalent interactions and ion-molecule adducts between Ru and CS favor the formation of heterojunctions at the sensor-analyte interface, thus accelerating the reactions towards MT. The Ru-CS/Screen-printed carbon electrode (SPCE) sensor demonstrated the outstanding electrocatalytic oxidation of MT owing to its high surface area and heterogeneous rate constants and afforded a lower detection limit (0.27 μM), high sensitivity (0.85 μA μM -1 cm-2), and excellent selectivity for MT with the co-existence of crucial neurotransmitters, including norepinephrine, epinephrine, dopamine, and serotonin. High concentrations of active biomolecules, such as ascorbic acid and tyrosine, did not interfere with MT detection. The practical feasibility of the sensor for MT detection in pharmaceutical samples was demonstrated, comparable to the data provided on the product labels. The developed amperometric sensor is highly suitable for the quality control of medicines because of its low cost, simplicity, small sample size, speed of analysis, and potential for automation.

An amplified electrochemical sensor employing one-step synthesized nickel-copper-zinc ferrite/carboxymethyl cellulose/graphene oxide nanosheets composite for sensitive analysis of omeprazole

In this work, a signal amplification strategy was designed by the fabrication of a highly sensitive and selective electrochemical sensor based on nickel-copper-zinc ferrite (Ni0.4Cu0.2Zn0.4Fe2O4)/carboxymethyl cellulose (CMC)/graphene oxide nanosheets (GONs) composite modified glassy carbon electrode (GCE) for determination of omeprazole (OMP). The one-step synthesized Ni0.4Cu0.2Zn0.4Fe2O4/CMC/GONs nanocomposite was characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy and X-ray diffraction techniques. Then, the Ni0.4Cu0.2Zn0.4Fe2O4/CMC/GONs/GCE was applied to study the electrochemical behavior of the OMP. Electrochemical data show that the Ni0.4Cu0.2Zn0.4Fe2O4/CMC/GONs/GCE exhibits superior electrocatalytic performance on the oxidation of OMP compared with bare GCE, GONs/GCE, CMC/GONs/GCE and MFe2O4/GCE (M = Cu, Ni and Zn including single, double and triple of metals) which can be attributed to the synergistic effects of the nanocomposite components, outstanding electrical properties of Ni0.4Cu0.2Zn0.4Fe2O4 and high conductivity of CMC/GONs as well as the further electron transport action of the nanocomposite. Under optimal conditions, the Ni0.4Cu0.2Zn0.4Fe2O4/CMC/GONs/GCE offers a high performance toward the electrodetermination of OMP with the wide linear-range responses (0.24-5 and 5-75 μM), lower detection limit (0.22 ± 0.05 μM), high sensitivity (1.1543 μA μM-1 cm-2), long-term signal stability and reproducibility (RSD = 2.54%). It should be noted that the Ni0.4Cu0.2Zn0.4Fe2O4/CMC/GONs/GCE sensor could also be used for determination of OMP in drug and biological samples, indicating its feasibility for real analysis.

Methylene blue molecularly imprinted polymer for melatonin determination in urine and saliva samples

A highly sensitive and rapid electrochemical sensor was developed for detecting melatonin using a molecularly imprinted polymer (MIP) with methylene blue as the functional monomer and melatonin as the template. The MIP was synthesized via a simple electropolymerization process that did not require an initiating reagent. The sensor demonstrated good selectivity for melatonin against common interferences such as lactate, cytosine, cytidine, urea, ascorbic acid, creatine, creatinine, serotonin, and tryptophan. Melatonin detection was achieved at a potential of 0.60 V vs. Ag/AgCl with a sensitivity of 138.8 ± 4.7 µA µM‒1 in the linear range 0.097 - 200 µM and a limit of detection of 29 nM (3SB/m). The sensor exhibited excellent reproducibility and repeatability for both within (intra) and between (inter) electrodes (%RSD < 3% for n = 3). The sensor was applied to authentic urine and saliva samples with recoveries of 103 ± 1% and 102 ± 1%, respectively.

Fabrication of High-Density Vertical Closed Bipolar Electrode Arrays by Carbon Paste Filling Method for Two-Dimensional Chemical Imaging

In this study, a carbon paste filling method was proposed as a simple strategy for fabricating high-density bipolar electrode (BPE) arrays for bipolar electrochemical microscopy (BEM). High spatiotemporal resolution imaging was achieved using the fabricated BPE array. BEM, which is an emerging microscopic system in recent years, achieves label-free and high spatiotemporal resolution imaging of molecular distributions using high-density BPE arrays and electrochemiluminescence (ECL) signals. We devised a simple method to fabricate a BPE array by filling a porous plate with carbon paste and succeeded in fabricating a high-density BPE array (15 μm pitch). After a detailed observation of the surface of the BPE array using a scanning electron microscope, the basic electrochemical and ECL emission characteristics were evaluated using potassium ferricyanide solution as a sample solution. Moreover, inflow imaging of the sample molecules was conducted to evaluate the imaging ability of the prepared BPE array. In addition, Prussian Blue containing carbon ink was applied to the sample solution side of the BPE array to provide catalytic activity to hydrogen peroxide, and the quantification and inflow imaging of hydrogen peroxide by ECL signals was achieved. This simple fabrication method of the BPE array can accelerate the research and development of BEM. Furthermore, hydrogen peroxide imaging by BEM is an important milestone for achieving bioimaging with high spatiotemporal resolution such as biomolecule imaging using enzymes.

Recent Advances in Electrochemical and Optical Sensors for Detecting Tryptophan and Melatonin

Tryptophan and melatonin are pleiotropic molecules, each capable of influencing several cellular, biochemical, and physiological responses. Therefore, sensitive detection of tryptophan and melatonin in pharmaceutical and human samples is crucial for human well-being. Mass spectrometry, high-performance liquid chromatography, and capillary electrophoresis are common methods for both tryptophan and melatonin analysis; however, these methods require copious amounts of time, money, and manpower. Novel electrochemical and optical detection tools have been subjects of intensive research due to their ability to offer a better signal-to-noise ratio, high specificity, ultra-sensitivity, and wide dynamic range. Recently, researchers have designed sensitive and selective electrochemical and optical platforms by using new surface modifications, microfabrication techniques, and the decoration of diverse nanomaterials with unique properties for the detection of tryptophan and melatonin. However, there is a scarcity of review articles addressing the recent developments in the electrochemical and optical detection of tryptophan and melatonin. Here, we provide a critical and objective review of high-sensitivity tryptophan and melatonin sensors that have been developed over the past six years (2015 onwards). We review the principles, performance, and limitations of these sensors. We also address critical aspects of sensitivity and selectivity, limit and range of detection, fabrication process and time, durability, and biocompatibility. Finally, we discuss challenges related to tryptophan and melatonin detection and present future outlooks.

Microporous P-doped carbon spheres sensory electrode for voltammetry and amperometry adrenaline screening in human fluids

An electrochemical sensor-based phosphorus-doped microporous carbon spheroidal structures (P-MCSs) has been designed for selective adrenaline (ADR) signaling in human blood serum. The P-MCS electrode sensor is built with heterogeneous surface alignments including multiple porous sizes with open holes and meso-/macro-grooves, rough surface curvatures, and integral morphology with interconnected and conjugated microspheres. In addition, the P atom-doped graphitic carbon forms highly active centers, increases charge mobility on the electrode surface, creates abundant active centers with facile functionalization, and induces binding to ADR molecules. The designed P-MCS electrode exhibits ultrasensitive monitoring of ADR with a low detection limit of 0.002 μM and high sensitivity of 4330 μA μM^-1 cm^-2. In addition, two electrochemical techniques, namely, square wave voltammetry (SWV) and chronoamperometry (CA), were used; these techniques achieve high stability, fast response, and a wide linear range from 0.01 to 6 μM. The sensing assays based on P-MCSs provide evidence of the formation of active interfacial surface-to-ADR binding sites, high electron diffusion, and heavy target loads along with/without a plane of spheroids. Thus, P-MCSs can be used for the routine monitoring of ADR in human blood serum, providing a fast response, and requiring highly economical materials at extremely low concentrations. Electrode surface modulation based on P-doped carbon spheres (P-MCS) exhibits high electrochemical activity with fast charge transport, multi-diffusible active centers, high loading of ADR, and facile molecular/electron diffusion at its surface. The P-MCS sensitively and selectively detects the ADR in human fluids and can be used for clinical investigation of some neuronal diseases such as Alzheimer diseases.

Simultaneous voltammetric determination of epinephrine and acetaminophen using a highly sensitive CoAl-OOH/reduced graphene oxide sensor in pharmaceutical samples and biological fluids

For this study, three novel types of sensors comprised of CoAl-layered double oxyhydroxide (CoAl-LDH), CoAl-LDH/reduced graphene oxide (rGO), and CoAl-OOH/rGO nanosheets were successfully fabricated on glassy carbon electrodes (GCEs) and employed for the electrochemical detection of epinephrine (EP) and acetaminophen (AC). Interestingly, we found that the CoAl-OOH/rGO/GCE was more suitable for the determination of EP and AC in contrast to the CoAl-LDH and CoAl-OOH/rGO sensors. Differential pulse voltammetry results revealed that the CoAl-OOH/rGO/GCE delivered excellent electrocatalytic activity. The sensitivities and detection limits for the simultaneous measurement of EP and AC were 12.2 μA μM^-1 cm^-2, 0.023 μM L^-1, and 4.87 μA μM^-1 cm^-2, 0.058 μM L^-1, respectively. Especially, the as-obtained CoAl-OOH/rGO/GCE was successfully utilized for the detection in pharmaceutical samples and biological fluids with satisfactory results. Owing to its outstanding electrocatalytic activity and superior sensitivity, the CoAl-OOH/rGO/GCE could be beneficial to construct a promising electrochemical sensor for the detection of EP and AC.

Chemically modified carbon-based electrodes for the determination of paracetamol in drugs and biological samples

Paracetamol is a non-steroidal, anti-inflammatory drug widely used in pharmaceutical applications for its sturdy, antipyretic and analgesic action. However, an overdose of paracetamol can cause fulminant hepatic necrosis and other toxic effects. Thus, the development of advantageous analytical tools to detect and determine paracetamol is required. Due to simplicity, higher sensitivity and selectivity as well as costefficiency, electrochemical sensors were fully investigated in last decades. This review describes the advancements made in the development of electrochemical sensors for the paracetamol detection and quantification in pharmaceutical and biological samples. The progress made in electrochemical sensors for the selective detection of paracetamol in the last 10 years was examined, with a special focus on highly innovative features introduced by nanotechnology. As the literature is rather extensive, we tried to simplify this work by summarizing and grouping electrochemical sensors according to the by which manner their substrates were chemically modified and the analytical performances obtained.

Developments and applications of nanomaterial-based carbon paste electrodes

This review summarizes the progress that has been made in the past ten years in the field of electrochemical sensing using nanomaterial-based carbon paste electrodes. Following an introduction into the field, a first large section covers sensors for biological species and pharmaceutical compounds (with subsections on sensors for antioxidants, catecholamines and amino acids). The next section covers sensors for environmental pollutants (with subsections on sensors for pesticides and heavy metal ions). Several tables are presented that give an overview on the wealth of methods (differential pulse voltammetry, square wave voltammetry, amperometry, etc.) and different nanomaterials available. A concluding section summarizes the status, addresses future challenges, and gives an outlook on potential trends.

Comparative Electroanalytical Studies of Graphite Flake and Multilayer Graphene Paste Electrodes

In this paper, the fabrication, surface characterisation and electrochemical properties of graphite flake (GFPE) and multilayer graphene (MLGPE) paste electrodes are described. The Raman investigations and scanning electron microscopy were used to analyze and compare structure of both carbon materials. The electroanalytical performance of both electrodes was examined and compared on the basis of the square-wave and cyclic voltammetric behavior of acetaminophen and model redox systems. Results of those studies revealed that GFPE has a larger electroactive surface area and better conductive properties, whilst MLGPE demonstrate better analytical characteristic in case of acetaminophen (AC) determination. AC determination was developed using square wave voltammetry (SWV) and square wave stripping voltammetry (SWSV). For both working electrodes, the process of accumulation enabled us to obtain an extended linear range and to lower the detection limit. In pharmaceutical formulations, AC was determined with good recovery.

A highly sensitive sensor based on ordered mesoporous ZnFe2O4 for electrochemical detection of dopamine

Accurate and sensitive detection of dopamine (DA) is fundamental to monitor and diagnose certain neurological diseases. Herein, highly ordered mesoporous ZnFe₂O₄ (OM-ZnFe₂O₄) is prepared via a facile nanocasting method and shows the highly sensitive in the electrochemical detection of DA. The optimized OM-ZnFe₂O₄-40 shows the most excellent activity for DA oxidation in a wide linear range from 2 to 600 nM with a quick response time of 5 s, high sensitivity of 0.094 nA nM^-1 and a lower detection limit of 0.4 nM (S/N = 3). The electrode modified with OM-ZnFe₂O₄ is further successfully used to monitor the increase of DA concentration induced by K⁺-stimulation of living PC12 cells in a neurological environment. This work offers a simple and powerful strategy for designing electrodes for detecting DA in biological systems.

Simultaneous electrochemical determination of dopamine and epinephrine using gold nanocrystals capped with graphene quantum dots in a silica network

Gold nanocrystals (AuNCs) were synthesized by economical and green strategy in aqueous medium by using N[3(trimethoxysilyl)propyl]ethylenediamine (TMSPED) as both a reducing and stabilizing mediator to avoid the aggregation of gold nanocrystals. Then, the AuNCs were capped with graphene quantum dots (GQDs) using an ultrasonic method. The resulting nanocomposites of GQD-TMSPED-AuNCs were characterized by X-ray photoelectron, X-ray diffraction, Raman, UV-vis and FT-IR spectroscopies. The size and shape of the nanocomposites were confirmed by using transmission electron microscopy and atomic force microscopy. The GQD-TMSPED-AuNCs placed on a glassy carbon electrode enable simultaneous determination of dopamine (DA) and epinephrine (EP) with peak potentials at 0.21 and 0.30 V (vs. Ag/AgCl). The response is linear in the 5 nM - 2.1 μM (DA) and 10 nM - 4.0 μM (EP) concentration ranges, with detection limits of 5 and 10 nM, respectively. The sensor shows good selectivity toward DP and EP in the presence of other molecules, facilitating its rapid detection in practical applications. Graphical abstract Schematic representation of gold nanocrystals capped with graphene quantum dots in the modified electrodes for simultaneous detection of dopamine and epinephrine.

A carbon paste electrode modified with Al2O3-supported palladium nanoparticles for simultaneous voltammetric determination of melatonin, dopamine, and acetaminophen

The authors have modified a carbon paste electrode with Al₂O₃-supported palladium nanoparticles (PdNP@Al₂O₃) to obtain a sensor for simultaneous voltammetric determination of melatonin (MT), dopamine (DA) and acetaminophen (AC). The PdNP@Al₂O₃ was characterized by scanning electron microscopy and energy-dispersive X-ray spectra. The sensor can detect DA, AC, MT and their mixtures by giving distinct signals at working voltages of typically 236, 480 and 650 mV (vs. Ag/AgCl), respectively. Differential pulse voltammetric peak currents of DA, AC and MT increase linearly in the 50 nmol L^-1 - 1.45 mmol L^-1, 40 nmol L^-1 -1.4 mmol L^-1, and 6.0 nmol L^-1 - 1.4 mmol L^-1 concentration ranges. The limits of detection are 36.5 nmol L^-1 for DA, 36.5 nmol L^-1 for AC, and 21.6 nmol L^-1 for MT. The sensor was successfully used to detect the analytes in (spiked) human serum and drug samples. Graphical abstract Schematic presentation of Al2O3-supported palladium nanoparticles (PdNP@Al2O3) for modification of a carbon paste electrode (CPE) to develop a voltammetric sensor for the simultaneous determination of dopamine (DA), acetaminophen (AC) and melatonin (MT).

Electrochemical Determination of Adrenaline Using MXene/Graphite Composite Paste Electrodes

MXene/graphite composite paste electrode (MXene/GCPE)-based electrochemical sensor has been fabricated for the detection of adrenaline. The electrode exhibits a sensitive response to adrenaline in phosphate buffer solution of pH 7.4, and its catalytic activity is much higher than that of the bare graphite paste electrode. The electron-transfer reaction of MXene/GCPE is a diffusion controlled process. The graph of concentration of adrenaline with the peak current exhibits two linearities, one in the lower and other in the higher concentration range with a detection limit of 9.5 nM. The simultaneous analyses of adrenaline, ascorbic acid, and serotonin reveal that the fabricated electrode could separate the overlapped cyclic voltammetric peaks of these ternary mixtures. This electrode has been further employed in the detection of adrenaline in pharmaceutical samples with 99.2-100.8% recoveries.