Analyte-triggered cyclic autocatalytic oxidation amplification combined with an upconversion nanoparticle probe for fluorometric detection of copper(II)

Analyte-triggered cascade signal amplification strategy for highly sensitive detection of iodate in table salt with dual-readout signals

A novel and highly sensitive upconversion fluorescence and colorimetric dual readout iodate (IO₃^-) nanosensor system was constructed by using both the outstanding optical performance of NaYF₄:Yb, Tm upconversion nanoparticles (UCNPs) and the analyte-triggered cascade signal amplification (CSA) technique. The construction of the sensing system consisted of three processes. First, IO₃^- oxidized o-phenylenediamine (OPD) to diaminophenazine (OPDox), while IO₃^- was reduced to I₂. Second, the generated I₂ can further oxidize OPD to OPDox. This mechanism has been verified by ¹H NMR spectra titration analysis and HRMS measurement, which effectively improves the selectivity and sensitivity of the measurement of IO₃^-. Third, the generated OPDox can effectively quench the fluorescence of UCNPs via the inner filter effect (IFE), realize analyte-triggered CSA, and allow quantitative determination of IO₃^-. Under the optimized conditions, the fluorescence quenching efficiency showed a good linear relationship to IO₃^- concentration in the range of 0.06-100 μM, and the detection limit reached 0.026 μM (3RSD/slope). Moreover, this method was applied to detect IO₃^- in table salt samples, yielding satisfactory determination results with excellent recoveries (95.5-105%) and high precision (RSD <5.5%). These results suggest that the dual-readout sensing strategy with well-defined response mechanisms has promising application prospects in physiological and pathological studies.

Ultrafast synthesized monometallic nanohybrids as an efficient quencher and recognition antenna of upconversion nanoparticles for the detection of xanthine with enhanced sensitivity and selectivity

Upconversion nanoparticles (UCNPs) have shown great promise in bioanalytical applications owing to their excellent optical properties. Generally, most analytical applications are based on the fluorescence resonance energy transfer (FRET) principle to quench the fluorescence of UCNPs. However, each UCNP contains thousands of emission center ions, and most of them exceed the FRET critical distance, which hinders FRET efficiency and leads to a low signal-to-background ratio (SBR). Herein, a novel nanoprobe for the detection of Xanthine (XA) based on inner filter effects (IFE) and cascade signal amplification strategy was constructed by decorating UCNP with trypsin-chymotrypsin-stabilized gold nanoparticles-gold nanoclusters (Try-chy-AuNPs-AuNCs) monometallic nanohybrids. The Try-chy-AuNPs-AuNCs prepared by ultrafast (3 min) and green synthesis method have efficient upconversion fluorescence quenching ability (the quenching efficiency up to 90.9%), which can effectively improve the SBR of the probe, so as to improve the sensitivity. In addition, the Try-chy-AuNPs-AuNCs have a unique spatial structure, which can effectively prevent the interaction between large-size biothiol (glutathione) and the probe, thus improving its selectivity. Besides, combined with the excellent optical performance of UCNPs and cascaded signal amplification strategy, the sensitivity of the probe can be further improved. Under the optimized conditions, the linear response range of the probe was obtained from 0.05 to 50 μM, 0.06-80 μM and with the low detection limit of 22.6 nM and 26.3 nM for H₂O₂ and XA, respectively. Meanwhile, the developed method has been further applied to the detection of XA in human serum with satisfactory results.

An upconversion nanosensor for rapid and sensitive detection of tetracycline in food based on magnetic-field-assisted separation

Tetracycline, a broad-spectrum antibiotic, has been widely used in disease treatment and other fields. However, due to the unreasonable use, its residue remains in food which eventually harms human health. Here described an upconversion nanosensor for tetracycline detection based on magnetic separation and electrostatic adsorption. To identify tetracycline, tetracycline aptamer, and europium ions (Eu³⁺) were introduced in the system. According to the electrostatic adsorption principle, Eu³⁺ exposed core-shell UCNPs were bound to negative complex of magnetic nanoparticles (MNPs) and aptamer. In the presence of tetracycline, UCNPs separated with MNPs-aptamer and remained in the supernatant by an external magnetic field. Under optimal conditions, the linear detection range of tetracycline was 0.5-1000 ng·mL^-1, and the detection limit was 0.17 ng·mL^-1. It has been successfully applied to detect tetracycline in food samples. The constructed method provided broad prospects for tetracycline detection with the merits of simple operation, high sensitivity, excellent repeatability, and selectivity.

Exploring Heterostructured Upconversion Nanoparticles: From Rational Engineering to Diverse Applications

Upconversion nanoparticles (UCNPs) represent a class of optical nanomaterials that can convert low-energy excitation photons to high-energy fluorescence emissions. On the basis of UCNPs, heterostructured UCNPs, consisting of UCNPs and other functional counterparts (metals, semiconductors, polymers, etc.), present an intriguing system in which the physicochemical properties are largely influenced by the entire assembled particle and also by the morphology, dimension, and composition of each individual component. As multicomponent nanomaterials, heterostructured UCNPs can overcome challenges associated with a single component and exhibit bifunctional or multifunctional properties, which can further expand their applications in bioimaging, biodetection, and phototherapy. In this review, we provide a summary of recent achievements in the field of heterostructured UCNPs in the aspects of construction strategies, synthetic approaches, and types of heterostructured UCNPs. This review also summarizes the trends in biomedical applications of heterostructured UCNPs and discusses the challenges and potential solutions in this field.

Upconversion fluorescent aptasensor for bisphenol A and 17β-estradiol based on a nanohybrid composed of black phosphorus and gold, and making use of signal amplification via DNA tetrahedrons

This study describes an upconversion fluorescent aptasensor based on black phosphorus nanohybrids and self-assembled DNA tetrahedrons dual-amplification strategy for rapid detection of the environmental estrogens bisphenol A (BPA) and 17β-estradiol (E2). Tetrahedron complementary DNAs (T-cDNAs) were self-assembled in an oriented fashion on a 2D nanohybrid composed of black phosphorus (BP) and gold to give a materials of architecture BP-Au@T-cDNAs. In parallel, core-shell upconversion nanoparticles were modified with aptamers (UCNPs@apts) and used as capture probes. On complementary pairing, the BP-Au@T-cDNA quench the fluorescence of UCNPs@apts (measured at an excitation wavelength 808 nm and at main emission peaks at 545 nm and 805 nm.) Compared with single-stranded probes based on black phosphorus and gold, the dual-amplification strategy increases quenching efficiency by nearly 25%-30% and reduces capture time to 10 min. This is due to the higher optical absorption of 2D nanohybrid and the reduction of steric hindrance by T-cDNAs. Exposure to BPA or E2 cause the release of UCNPs@apts from the BP-Au@T-cDNAs due to stronger binding between aptamer and analyte. Hence, fluorescence recovers at 545 nm for BPA and 805 nm for E2. Based on these findings, a dually amplified aptamer assay was constructed that covers the 0.01 to 100 ng mL^-1 BPA concentration range, and the 0.1 to 100 ng mL^-1 E2 concentration range. The detection limits are 7.8 pg mL^-1 and 92 pg mL^-1, respectively. This method was applied to the simultaneous determination of BPA and E2 in spiked samples of water, food, serum and urine. Graphical abstract Schematic presentation of novel quenching probes designed by tetrahedron complementary DNAs oriented self-assembled on the surface of black phosphorus/gold nanohybrids. Combined with aptamer-modified upconversion nanoparticles, a dual-amplification self-assembled fluorescence nanoprobe was constructed for simultaneous detection of BPA and E2.

A fluorescent probe for sequential sensing of MnO4− and Cr2O72− ions in aqueous medium based on a UCNS/TMB nanosystem

Distinguishable and sequential detection of MnO₄⁻ and Cr₂O₇²⁻ was realized by the reactions above and IFE between UCNS and oxTMB.