Ratiometric determination of copper(II) using dually emitting Mn(II)-doped ZnS quantum dots as a fluorescent probe

Synthesis Strategies, Optical Mechanisms, and Applications of Dual-Emissive Carbon Dots

Tuning the optical properties of carbon dots (CDs) and figuring out the mechanisms underneath the emissive phenomena have been one of the most cutting-edge topics in the development of carbon-based nanomaterials. Dual-emissive CDs possess the intrinsic dual-emission character upon single-wavelength excitation, which significantly benefits their multi-purpose applications. Explosive exploitations of dual-emissive CDs have been reported during the past five years. Nevertheless, there is a lack of a systematic summary of the rising star nanomaterial. In this review, we summarize the synthesis strategies and optical mechanisms of the dual-emissive CDs. The applications in the areas of biosensing, bioimaging, as well as photoelectronic devices are also outlined. The last section presents the main challenges and perspectives in further promoting the development of dual-emissive CDs. By covering the most vital publications, we anticipate that the review is of referential significance for researchers in the synthesis, characterization, and application of dual-emissive CDs.

The Synthesis of 2,2-BIS(1-INDOL-3-YL)Acenaphthylene-1(2)-Ones Using Nanocatalysis: Fluorescent Sensing for Cu2+ Ions

2,2-bis(1H-indol-3-yl)acenaphthylene-1(2H)-ones were synthesised by the reaction of acenaphthenequinone and 2 equivalents of indole using Fe3O4@SiO2@Si-Pr-NH-CH2CH2NH2 as the basic magnetic nanocatalyst, assembled under greener and sustainable conditions in high purity and yields. Furthermore, the photoluminescence properties of 2,2-bis(2-methyl-1H-indol-3-yl)acenaphthylene-1(2H)-one were exploited for the sensing of copper ions in the mixed solvent systems comprising H2O and CH3CN in excitation wavelength at 410 nm with a detection limit of 9.5 ∙ 10–6 M.

Supersensitive and reusable perovskite nanocomposite fiber paper for time-resolved single-droplet detection

Traditional test paper cannot be reusable and needs much sample solution. In this study, a reusable perovskite nanocomposite fiber paper consisting of CsPbBr₃ quantum dots in-situ growing in the solid polymer fibers with high concentration is fabricated via microwave and electrospinning methods. RhoB is used as the sample solution because it is a hazardous matter but often occurs in printing and dyeing wastewater or appears in food as additives, and traditional detection system generally requires much sample solution (>1 ml) to concentrate for higher concentrations due to the low detection sensitivity. Just need a droplet of sample solution (<25 μl) can this perovskite fiber paper achieve 0.01 ppm of supersensitive detection, which is superior to a majority of reported detection limit. Different from traditional detection based on luminescence intensity, this detection is a new kind of time-resolved method, so that it gets rid of complex and time-consuming calibration (>1 h) usually in traditional detection, and this time-resolved detection can be achieved within ~3 min. Moreover, this perovskite fiber paper is endowed with recyclable property without losing advantages of supersensitive detection (~0.01 ppm), rapid measuring speed (<3 min), and tiny dosage (<25 μl), which is another advantage than conventional detection systems.

Colorimetric fluorescent paper strip with smartphone platform for quantitative detection of cadmium ions in real samples

Instrument-free, portable and direct read-out mini-devices have wider application prospects in various fields, especially for real-time/on-site detection in environmental science. Herein, a colorimetric fluorescent sensor for detecting cadmium ions (Cd²⁺) based on aggregation-induced emission (AIE) was established, fluorescent paper strips integrated with smartphone platform was further designed for the visualization, on-site and quantitative detection of Cd²⁺. The colorimetric fluorescent sensor was prepared by mixing orange emission glutathione-stabilized gold nanoclusters (AuNCs) with blue emission ethylenediamine functionalized graphene oxide (EDA-GO), and introducing copper ions (Cu²⁺) to quench the orange emission of AuNCs while the blue emission served as a background reference without color change. The Cd²⁺ can induce Cu²⁺-GSH-AuNCs to aggregation and emit orange fluorescence, causing the fluorescent color of the sensor changed from blue to red with the limit of detection (LOD) as low as 33.3 nM in solution. Moreover, fluorescent paper strips integrated with smartphone platform has a sensitive detection of Cd²⁺ with the LOD of 0.1 μM in rice samples. The method reported here might have great application prospects in real-time monitoring of foods safety and environmental protection.

Triazole-stabilized fluorescence sensor for highly selective detection of copper in tea and animal feed

A triazole-stabilized fluorescence sensor is developed for copper detection in the study. Tris-(benzyltriazolylmethyl)amine (TBTA) is used to improve the sensitivity and stability for the sensing system. A series of comparative experiments are performed with and without TBTA. In the presence of TBTA, the fluorescence decrease ratio is enhanced from 2.46 to 118.25; the detection limit is reduced from 67 nM to 3.6 nM; the higher selectivity toward copper compared to the other metal ions is verified, including K⁺, Ca²⁺, Cd²⁺, Zn²⁺, Mg²⁺, Mn²⁺, Pb²⁺, Hg²⁺, Fe³⁺ and Cr³⁺. Besides, the sensing system is successfully applied for copper determination in complex tea samples and chicken feed samples with the recovery range of 91.67-116.8%. A good consistency between the presented sensor and the flame atom absorbance spectrometry (FAAS) is confirmed by the low relative errors with the range from -2.39% to 7.02%.

CdSe quantum dots capped with a deep eutectic solvent as a fluorescent probe for copper(II) determination in various drinks

The present study shows that copper(II) ions can be determined with a new fluorescent probe that is based on the use of CdSe quantum dots capped with deep eutectic solvent (DES-CdSe QDs). The capped QDs were prepared in aqueous phase by a one-step procedure under ambient atmosphere using selenium dioxide as a stable precursor for selenium, and ascorbic acid as non-toxic reducing agent. The deep eutectic solvent is composed of choline chloride and thioglycolic acid and acts as stabilizing and functionalizing agent. The fluorescent probe undergoes an increase in the fluorescence intensity (with excitation/emission wavelengths at 380/560 nm) in the presence of Cu(II). Other ions display no significant effect on fluorescence. The effects of sample pH value, concentration of buffer, and volume of QDs solution were optimized by response surface methodology using a Box-Behnken statistical design. Under the optimal conditions, the response of the probe is linear in the 10-600 nM Cu(II) concentration range, with a 5.3 nM limit of detection. This is lower than the allowable maximum Cu(II) concentration in drinking water. The relative standard deviation of the method for five replicate measurements of Cu(II) at a 100 nM concentration level is 2.0%. The probe was successfully applied to the determination of Cu(II) in various drinks. Graphical abstractSchematic representation of a fluorometric method for the determination of Cu(II) at nanomolar concentration levels. The fluorescent system consists of deep eutectic solvent-capped cadmium selenide quantum dots (DES-CdSe QDs). Fluorescence is strongly enhanced by copper(II).

A fluorometric optical fiber nanoprobe for copper(II) by using AgInZnS quantum dots

An optical fiber nanoprobe is presented for fluorometric determination of copper(II). The method based on the use of water-dispersible AgInZnS quantum dots (QDs) deposited at the end of an optical fiber in a poly(vinyl alcohol) matrix. The fluorescnece of the QDs, best measured at excitation/emisssion wavelengths of 365/570 nm, is quenched by Cu(II) due to both static and electron transfer from the QDs to Cu(II). This is experimentally confirmed by photoluminescence and UV-vis absorption spectra, and measurement of luminescence lifetimes. The probe is highly selective and possesses a linear detection range that extends from 2.5 to 800 nM. Graphical abstractSchematic representation of an optical fiber nanoprobe based on hydrophilic AgInZnS quantum dots for fluorometric determination of copper(II). The fluorescence is quenched by Cu(II) due to static quenching and dynamic quenching. It has a detection range of 2.5-800 nM.

Toxicity and serum metabolomics investigation of Mn-doped ZnS quantum dots in mice

Purpose

Mn-doped ZnS quantum dots (QDs) with special luminescent properties have been widely researched and applied in various fields. Thus, their release toxicity and security cannot be ignored.

Methods

In the present study, the toxicity and non-targeted metabolomics of Mn-doped ZnS QDs were investigated after single intravenous injection. Serum metabolites were evaluated based on gas chromatography–mass spectrometry together with multivariate statistical analyses [principal component analysis, partial least squares discriminant analysis, and orthogonal PLS-DA].

Results

The modified metabolites (variable importance in the projection (VIP) >1 and p<0.05) revealed that Mn-doped ZnS QDs exposure disturbed glycolysis, tricarboxylic acid cycle, ketoplasia, glutaminolysis, and amino acid and lipid metabolism. The behavior, coefficients of organs, and histological changes were the same as in the control group, and the disturbance of hematology and serum biochemistry was not dose- or time-dependent.

Conclusion

Our study provides a general observation regarding the toxicity and potential metabolic responses of mice exposed to Mn-doped ZnS QDs.