Photoelectrochemical determination of the activity of alkaline phosphatase by using a CdS@graphene conjugate coupled to CoOOH nanosheets for signal amplification

Single-atom Zr-doped CoOOH with enhanced electrical conductivity as a signal amplifier and detection probe for the indirect non-enzymatic electrochemical determination of malathion in foods

Herein, a novel electrochemical sensor based on zirconium-doped cobalt oxyhydroxide (ZrCoOOH) was proposed for highly sensitive non-enzymatic determination of malathion (MAL). The doping of Zr can improve the electrical conductivity of CoOOH, of which the transfer resistance was reduced from 241.1 Ω to 140.2 Ω. Furthermore, the X-ray photoelectron spectroscopy confirmed that part of Co2+ was converted to Co3+ due to the introduction of Zr. The Co3+ in ZrCoOOH could react with MAL to form Co2+, which enhanced the electrooxidation current of Co2+. Therefore, the peak current of Co2+ was served as detection probe for MAL. Under optimal conditions, the developed sensor established the linear relationship for MAL in the concentration range of 0.001-10.0 μM with a low limit of detection (0.64 nM). The constructed sensor was employed to detect MAL in food samples (peach, kiwi fruit, spinach and tomato), verifying the accuracy and practicability of the sensor.

Detection of ascorbic acid by persistent luminescent nanoparticles based on CoOOH nanosheets modification

Persistent luminescent nanomaterials (PLNPs) Zn0.8Ga2O4: Cr3+, Zr3+ with high brightness and good dispersion were prepared by hydrothermal method. The PLNPs were used as luminescent units, and CoOOH nanosheets were used as quenching agents. Based on the fluorescence internal filtering effect, the luminescence of PLNPs were effectively quenched by CoOOH modification on the surface of PLNPs. However, the introduction of ascorbic acid (AA) restored the luminescence of PLNPs and successfully achieved highly sensitive and selective detection of AA. This was due to a selective redox reaction between CoOOH and AA, in which CoOOH was reduced to Co2+. The degree of luminescence recovery of PLNPs showed a good linear relationship with AA concentration in the range 5-250 µM, with a detection limit of 0.72 µM. The recovery of actual spiked samples were 97.9-102.2%. This method is expected to provide reference for the study of other redox substances in biological systems.

Ti3C2@UiO-TCPP Schottky junction photoelectrochemical sensor for detecting alkaline phosphatase through the steric hindrance effect of phosphopeptide

Alkaline phosphatase (ALP) is a major biomarker for clinical diagnosis, but detection methods of ALP are limited in sensitivity and selectivity. In this paper, a novel method for ALP determination is proposed. A photoelectrochemical (PEC) sensor was prepared by growing UiO-tetratopic tetrakis (4-carbox-yphenyl) porphyrin (TCPP) in situ between layered Ti3C2 through a one-pot hydrothermal method. The obtained Schottky heterojunction photoelectric material Ti3C2@UiO-TCPP not only has a large light absorption range but also greatly improves the efficiency of photogenerated electron hole separation and thereby enhances sensitivity for PEC detection. The phosphate group on the phosphorylated polypeptide was utilized to form a Zr-O-P bond with the zirconium ion on UiO-66, and then photocurrent decreases due to the steric hindrance effect of phosphorylated polypeptides, that is, the hindrance of electron transfer between the photoelectric material and a solution. The specific interaction between ALP and phosphorylated polypeptides shears the bond between phosphate and zirconium ion on UiO-66 in the peptides then weakens the hindrance effect and increases the photocurrent, thus realizing ALP detection. The linear range of ALP is 0.03-10,000 U·L-1, and the detection limit is 0.012 U·L-1. The method is highly sensitive and selective, and has been applied in detection of ALP in serum samples.

Colorimetric detection of alkaline phosphatase based on the off-on effect of light-responsive oxidase mimicking activity of covalent organic framework (Cu-TpBpy-COF) under near-neutral condition

A colorimetric strategy has been developed for the detection of alkaline phosphatase (ALP) activity based on the off-on effect of the catalytic activity of light-responsive oxidase mimics covalent organic framework (Cu-TpBpy-COF) in near-neutral condition. Cu-TpBpy-COF can effectively catalyze the oxidation of the colorless substrate 3,3',5,5'-tetramethylbenzidine (TMB) by oxygen to form a blue oxidized product (oxTMB) with an absorption peak at 652 nm. Cu2+ is the active center of Cu-TpBpy-COF and pyrophosphate (PPi) can form a complex with Cu2+ to weaken the catalytic activity of Cu-TpBpy-COF. In the presence of ALP, PPi is hydrolyzed into orthophosphates (Pi) with low affinity to Cu2+, thus resulting in absorbance restoration. The absorbance at 652 nm is related to ALP activity in the linear range 10-150 U·L-1 with a detection limit of 7.17 U·L-1. The recoveries of ALP in serum samples are in the range 94.7~107.0% with relative standard deviations (RSD) lower than 5%. The decisive role of Cu2+ on the enhancing catalytic activities of Cu-TpBpy-COF in neutral condition was verified by TpBpy-COF and TpBD-COF as controls, in which the main difference between them is that TpBpy-COF contains pyridine nitrogen. Upon Cu2+ modification, Cu-TpBpy-COF has better catalytic activity than TpBpy-COF in a broader pH range because of the in situ generation of Cu+ under irradiation.

Target-Induced Photocurrent-Polarity-Switching PEC Sensing Platform Based on In Situ Generation of Oxygen Vacancy-Modulated Energy Band Structures

The polarity of the photocurrent can be modulated by tunable bipolar photoelectrochemical (PEC) behavior, which is anticipated to address the issues of high background signal caused by traditional unidirectional increasing/decreasing response and false-positive/false-negative problems. Here, a new approach is suggested for the first time, which employs a target-induced enzyme-catalyzed reaction and in situ oxygen vacancy (OV) generation to achieve heterojunction photocurrent switching for highly sensitive detection of alkaline phosphatase (ALP). Among them, the ALP can catalyze the decomposition of ascorbic acid phosphate to produce ascorbic acid, which not only acts as an electron donor to change the redox environment but also acts as a reducing agent to introduce OVs into BiOBr semiconductors in cooperation with illumination. The introduction of vacancies can effectively modulate the energy band structure of BiOBr, while with the change of redox conditions, the transfer path of photogenerated carriers is changed, thus realizing the switching of photocurrents, which leads to its use in the construction of a negative-background anti-interference PEC sensing platform, achieving a wide linear range from 0.005 to 500 U·L-1 with a low detection limit of 0.0017 U·L-1. In conclusion, the photocurrent switching operation of this system is jointly regulated by chemistry, optics, and carrier motion, which provides a new idea for the construction of a PEC sensing platform based on photocurrent polarity switching.

Smartphone-assisted ratiometric fluorescence sensing platform and logical device based on polydopamine nanoparticles and carbonized polymer dots for visual and point-of-care testing of glutathione

As a crucial biothiol, glutathione (GSH) plays a key role in the organisms. Monitoring GSH level is of great significance for disease diagnosis and biomedical research. In this work, polydopamine (PDA) nanoparticles-red fluorescent carbonized polymer dots (r-CPDs) based ratiometric fluorescence sensing platform was constructed and employed for GSH assay. Dopamine (DA) could be oxidized by cobalt oxyhydroxide (CoOOH) nanosheets and further polymerized into PDA nanoparticles with green fluorescence. However, in the presence of GSH, CoOOH nanosheets were reduced and decomposed, which prevented the production of PDA nanoparticles. In the sensing system, green-emitting PDA nanoparticles were employed as a response unit and r-CPDs were used as an internal reference unit. With the addition of GSH, the green fluorescence of PDA nanoparticles decreased as well as the red fluorescence of system remained relatively stable. Importantly, a distinct fluorescence color evolution from green to red was presented with a serious of GSH concentrations. Based on this, a portable smartphone-assisted ratiometric chromaticity analytical method was developed to achieve the on-site visual detection of GSH. Both the established ratiometric fluorescence and ratiometric chromaticity sensing methods for GSH assay have the merits of wide linear range, high sensitivity and excellent accuracy, which are suitable for the determination of GSH in human serum and exhibit great application potential in rapid and accurate monitoring of the GSH levels in clinical. Moreover, an ingenious logical device reflecting GSH levels was designed based on the two different fluorescence signals, which provided a new strategy for the intelligent online detection of GSH in complex biological matrices.

Gold Nanocluster-catalyzed Luminol Chemiluminescent Sensing Method for Sensitive and Selective Detection of Alkaline Phosphatase

A sensitive sensing method was developed for the determination of alkaline phosphatase (ALP) activity based on gold nanocluster (Au NC)-catalyzed luminol-H2O2 chemiluminescent (CL) reaction. The CL signal of luminol-H2O2-Au NCs can be quenched by ascorbic acid, which was the product of magnesium ascorbyl phosphate (MAP) hydrolysis reaction catalyzed by ALP. The proposed sensing platform showed convenient, sensitive and selective detection of ALP in the range of 0.0027 - 1.3890 U L-1, with the detection limit of 0.0026 U L-1. The broad detection linear range and ultra-high sensitivity were inherited from the efficient free radical scavenging capability of ascorbic acid on the luminol-H2O2-Au NCs CL reaction. The CL sensing platform was applied to the detection of ALP activity in serum samples. We believe that this sensing platform is a universal CL strategy for ALP detection because ascorbic acid is an efficient CL quencher for many CL reactions.

Recent Progress and Development in Inorganic Halide Perovskite Quantum Dots for Photoelectrochemical Applications

Inorganic halide perovskite quantum dots (IHPQDs) have recently emerged as a new class of optoelectronic nanomaterials that can outperform the existing hybrid organometallic halide perovskite (OHP), II-VI and III-V groups semiconductor nanocrystals, mainly due to their relatively high stability, excellent photophysical properties, and promising applications in wide-ranging and diverse fields. In particular, IHPQDs have attracted much recent attention in the field of photoelectrochemistry, with the potential to harness their superb optical and charge transport properties as well as spectacular characteristics of quantum confinement effect for opening up new opportunities in next-generation photoelectrochemical (PEC) systems. Over the past few years, numerous efforts have been made to design and prepare IHPQD-based materials for a wide range of applications in photoelectrochemistry, ranging from photocatalytic degradation, photocatalytic CO₂ reduction and PEC sensing, to photovoltaic devices. In this review, the recent advances in the development of IHPQD-based materials are summarized from the standpoint of photoelectrochemistry. The prospects and further developments of IHPQDs in this exciting field are also discussed.

A photoelectrochemical aptasensor based on p-n heterojunction CdS-Cu2O nanorod arrays with enhanced photocurrent for the detection of prostate-specific antigen

A sensitive photoelectrochemical (PEC) aptasensor was constructed for prostate-specific antigen (PSA) detection using an enhanced photocurrent response strategy. The p-n heterostructure CdS-Cu₂O nanorod arrays were prepared on Ti mesh (CdS-Cu₂O NAs/TM) by a simple hydrothermal method and successive ionic-layer adsorption reactions. Compared with the original CdS/TM, the synergistic effect of p-n type CdS-Cu₂O NAs/TM and the internal electric field realizes the effective separation of photoinduced electron-hole pairs and improves the PEC performance. In order to construct the aptasensor, an amino-modified aptamer was immobilized on CdS-Cu₂O NAs/TM to serve as a recognition unit for PSA. After the introduction of PSA, PSA was specifically captured by the aptamer on the PEC aptasensor, which can be oxidized by photogenerated holes to prevent electron-hole recombination and increase photocurrent. Under optimal conditions, the constructed PEC aptasensor has a linear range of 0.1-100 ng·mL^-1 and a detection limit as low as 0.026 ng·mL^-1. The results of aptasensor detection of human serum indicate that it has broad application prospects in biosensors and photoelectrochemical analysis.

Fluorometric determination of the activity of alkaline phosphatase based on a system composed of WS2 quantum dots and MnO2 nanosheets

A fluorometric method is described for the detection of alkaline phosphatase (ALP) activity. It is based on the use of the product of hydrolysis of the drug amifostine (a thiophosphoester) by ALP. It is known that MnO₂ nanosheets quench the blue fluorescence of tungsten disulfide quantum dots (WS₂ QDs) which have excitation/emission wavelengths of 320/448 nm. However, in the presence of ALP and amifostine, the product of hydrolysis [2-(3-aminopropylamino)ethanethiol] triggers the decomposition of the MnO₂ nanosheets. This results in the recovery of fluorescence. Based on this finding, an assay for ALP activity was developed that works in the 0.09-1.6 U L^-1 range, with a 40 mU L^-1 detection limit. The relative standard deviation is 1.87% for five repeated measurements of 0.8 U L^-1 ALP. The method was applied to the analysis of ALP in real samples and gave satifactory results. Graphical abstractSchematic representation of a fluorometric method for determination of the activity of alkaline phosphatase (ALP). The fluorescence of a system composed of WS₂ quantum dots and MnO₂ nanosheets is quenched. Hydrolysis of the cytoprotective adjuvant amifostine (a phosphothioester) by ALP leads to a thiol that causes the decomposition of the MnO2 nanosheets. As a result, the blue fluorescence of the system becomes increasingly restored.

Highly sensitive photoelectrochemical detection of bleomycin based on Au/WS2 nanorod array as signal matrix and Ag/ZnMOF nanozyme as multifunctional amplifier

An ultrasensitive photoelectrochemical (PEC) biosensor was constructed based on gold nanoparticles (Au NPs)/tungsten sulfide nanorod array (WS₂ NA) photoelectrode as the PEC matrix and silver nanoparticles/flake-like zinc metal-organic framework (Ag/ZnMOF) nanozyme with the peroxidase mimetic enzyme property for sensitive detection of bleomycin (BLM). In particular, Au/WS₂ and Ag/ZnMOF were linked by thiolate DNA₁ and DNA₂ strand, respectively, and the Au/WS₂-Ag/ZnMOF probe was prepared via hybridization reaction between the two DNAs. The introduction of Ag/ZnMOF in the probe offers two functions: i) the steric hindrance effect can effectively impede electron transport and reduce the photocurrent; ii) Ag/ZnMOF nanozyme can also be used as mimic peroxidase to effectively catalyze 3,3-diaminobenzidine (DAB) to produce the relevant precipitation, which will further reduce photocurrent and eliminate false positive signals. When BLM exists, BLM with Fe²⁺ as irreversible cofactor can specifically recognize and cleave of the 5'-GC-3' active site of DNA₂, resulting in reduced precipitation deposited on the electrode and recovery of PEC signal. The highly sensitive PEC biosensor exhibits a the linear strategy from 0.5 nM to 500 nM with a detection limit down to 0.18 nM. Further, the unique strategy was conducted in biological samples for BLM detection with satisfactory consequence, offering available and efficient pathway for disease diagnosis.

A novel photoelectrochemical strategy based on an integrative photoactive heterojunction nanomaterial and a redox cycling amplification system for ultrasensitive determination of microRNA in cells

An ultrasensitive photoelectrochemical (PEC) bioassay for determination of microRNA was proposed based on an integrative photoactive heterojunction nanomaterial to provide the basis of excellent PEC responses and an efficient redox cycling amplification system to improve the detection performances. To establish the bioassay system, the biosensor was firstly modified with Bi₂WO₆@Bi₂S₃ and alkaline phosphatase (ALP). The detection solution was composed of ascorbic acid phosphate (AAP) and ferrocenecarboxylic acid (FcA), where ALP converted AAP into ascorbic acid (AA) to trigger a process of redox cycling amplification by reducing FcA⁺ to FcA, resulting in enhanced photocurrent responses of Bi₂WO₆@Bi₂S₃. In the presence of microRNA 21, it could trigger a hybridization chain reaction via the special designed hairpin DNA to produce a long repeated DNA sequences to inhibit ALP activity. Thus the reduced ALP activity and consequently decreased photocurrent signal could be obtained for detection of microRNA 21. As expected, this bioassay system performed the satisfactory performances for the ultrasensitive detection of microRNA 21 in the range from 1 fM to 1 nM with an experimental detection limit of 0.26 fM and acceptable practical applicability. Collectively, an efficient PEC bioassay for microRNA 21 is established and this strategy can be expanded to detect other microRNAs, even other molecules in cells.