A metal-organic framework of type MIL-101(Cr) for emulsification-assisted micro-solid-phase extraction prior to UHPLC-MS/MS analysis of polar estrogens

Overview of Liquid Sample Preparation Techniques for Analysis, Using Metal-Organic Frameworks as Sorbents

The preparation of samples for instrumental analysis is the most essential and time-consuming stage of the entire analytical process; it also has the greatest impact on the analysis results. Concentrating the sample, changing its matrix, and removing interferents are often necessary. Techniques for preparing samples for analysis are constantly being developed and modified to meet new challenges, facilitate work, and enable the determination of analytes in the most comprehensive concentration range possible. This paper focuses on using metal-organic frameworks (MOFs) as sorbents in the most popular techniques for preparing liquid samples for analysis, based on liquid-solid extraction. An increase in interest in MOFs-type materials has been observed for about 20 years, mainly due to their sorption properties, resulting, among others, from the high specific surface area, tunable pore size, and the theoretically wide possibility of their modification. This paper presents certain advantages and disadvantages of the most popular sample preparation techniques based on liquid-solid extraction, the newest trends in the application of MOFs as sorbents in those techniques, and, most importantly, presents the reader with a summary, which a specific technique and MOF for the desired application. To make a tailor-made and well-informed choice as to the extraction technique.

Cellulose-based adsorbents for solid phase extraction and recovery of pharmaceutical residues from water

Cellulose has attracted interest from researchers both in academic and industrial sectors due to its unique structural and physicochemical properties. The ease of surface modification of cellulose by the integration of nanomaterials, magnetic components, metal organic frameworks and polymers has made them a promising adsorbent for solid phase extraction of emerging contaminants, including pharmaceutical residues. This review summarizes, compares, and contrasts different types of cellulose-based adsorbents along with their applications in adsorption, extraction and pre-concentration of pharmaceutical residues in water for subsequent analysis. In addition, a comparison in efficiency of cellulose-based adsorbents and other types of adsorbents that have been used for the extraction of pharmaceuticals in water is presented. From our observation, cellulose-based materials have principally been investigated for the adsorption of pharmaceuticals in water. However, this review aims to shift the focus of researchers to the application of these adsorbents in the effective pre-concentration of pharmaceutical pollutants from water at trace concentrations, for quantification. At the end of the review, the challenges and future perspectives regarding cellulose-based adsorbents are discussed, thus providing an in-depth overview of the current state of the art in cellulose hybrid adsorbents for extraction of pharmaceuticals from water. This is expected to inspire the development of solid phase exraction materials that are efficient, relatively cheap, and prepared in a sustainable way.

From polyethylene waste bottles to UIO-66 (Zr) for preconcentration of steroid hormones from river water

Metal-organic framework (UiO-66 (Zr) was synthesized using polyethylene terephthalate (PET) and used as an adsorbent for extraction and preconcentration of steroid hormones in river water. Polyethylene waste bottles were used as the source of polyethylene terephthalate (PET) ligands. The UIO-66(Zr), which the PET was made from recycled waste plastics, was used for the first time for the extraction and preconcentration of four different types of steroid hormones in river water samples. Various analytical characterization techniques were employed to characterize the synthesized material. The steroid hormones were detected and quantified using high-performance liquid chromatography coupled with diode array detector (HPLC-DAD). The results were further validated using ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Experimental variables, such as sample pH, the mass of adsorbent and extraction time, were optimized using Box-Behnken design (BBD). The dispersive solid phase extraction method combined with HPLC-DAD, displayed good linearity (0.004-1000 µg/L) low limits of detections (LODs, 1.1-16 ng/L for ultrapure water and 2.6-5.3 ng/L for river water) and limits of quantification (LOQs, 3.7-5.3 ng/L for ultrapure water and 8.7-11.0 ng/L for river water samples) and acceptable extraction recoveries (86-101%). The intraday (n = 10) and interday (n = 5) precisions expressed in terms of relative standard deviations (%RSD) were all less than 5%. The steroid hormones were detected in most of the river water samples (Vaal River and Rietspruit River). The DSPE/HPLC method offered a promising approach for simultaneous extraction, preconcentration and determination of steroid hormones in water.

Metal-organic framework mixed-matrix membrane-based extraction combined HPLC for determination of bisphenol A in milk and milk packaging

The residues of bisphenol A (BPA) in milk packaging may transfer to milk, adversely affecting the human endocrine system. Consequently, to analyse or monitor BPA, it is imperative to develop rapid and effective approaches to BPA extraction from milk and milk packing as BPA is usually present in trace levels. Herein, we developed a rapid, simple, and low-cost dispersive-membrane-solid-phase-extraction (DME) for BPA with MIL-101(Cr) mixed-matrix-membrane (MMM). The MMM had large surface area (1322.09 m²/g) and pore volume (0.65 cm³/g), possessed great extraction efficiency of BPA, and kept more than 90% extraction efficiency after 20 times of reuse. Using the developed MIL-101(Cr)-MMM-based DME coupled with HPLC-fluorescence detector, we received an adequate linearity in the range of 0.1 ∼ 50 μg/L BPA and a limit of detection as low as 16 ng/L under optimized conditions. The recoveries of BPA in milk and milk bottles were from 74.2% to 110.6%, with RSDs less than 9.4%.

On the use of metal-organic frameworks for the extraction of organic compounds from environmental samples

The determination of trace metals and organic contaminants in environmental samples, such as water, air, soil, and sediment, is until today a challenging process for the analytical chemistry. Metal-organic frameworks (MOFs) are novel porous nanomaterials that are composed of metal ions and an organic connector. These materials are gaining more and more attention due to their superior characteristics, such as high surface area, tunable pore size, mechanical and thermal stability, luminosity, and charge transfer ability between metals and ligands. Among the various applications of MOFs are gas storage, separation, catalysis, and drug delivery. Recently, MOFs have been successfully introduced in the field of sample preparation for analytical chemistry and they have been used for sample pretreatment of various matrices. This review focuses on the applications of MOFs as novel adsorbents for the extraction of organic compounds from environmental samples.

Nanoplatform-Integrated Miniaturized Solid-Phase Extraction Techniques: A Critical Review

Preparation of the biological samples is one of the most critical steps in sample analysis. In past decades, the liquid-liquid extraction technique has been used to extract the desired analytes from complex biological matrices. However, solid-phase extraction (SPE) gained popularity due to versatility, simplicity, selectivity, reproducibility, high sample recovery %, solvent economy, and time-saving nature. The superior extraction efficiency of SPE can be attributed to the development of advanced techniques, including the nanosorbents technology. The nanosorbent technology significantly simplified the sample preparation, improved the selectivity, diversified the application, and accelerated the sample analysis. This review critically expands on the to-date advancements reported in SPE with particular regards to the nanosorbent technology.

Polystyrene Immobilized Sol-Gel Ground Silica Monolith Particles Using One-Pot Reaction of Enhanced Separation Efficiency

The stationary phase based on sol-gel ground silica monolith particles has been produced by one-pot polymerization method incorporation of styrene and ethylene dimethacrylate. First, the ground silica monolith particles were prepared by a sol-gel process followed by sedimentation. The particles were then subjected to modify with styrene ligand via one-pot polymerization, whereas ethylene dimethacrylate was used as the cross-linker. The glass lined stainless steel columns (1 mm internal diameter, 150 mm length) were packed with the above phase for estimation of the chromatographic performance in high-performance liquid chromatography. An average number of theoretical plates of as high as 39,300 plates/column was obtained under the optimized elution condition. The column-to-column reproducibility was proved satisfactory in separation efficiency and retention factor. The experimental results indicate that sol-gel ground silica particles prepared by an aid of one-pot modification can provide a better way for preparation of highly efficient stationary phase.

Enhanced microextraction of endocrine disrupting chemicals adsorbed on airborne fine particulate matter with gas chromatography-tandem mass spectrometric analysis

A novel double-microextraction approach, combining dispersive liquid-liquid microextraction (DLLME) and vortex-assisted micro-solid-phase extraction (VA-µ-SPE) was developed. The procedure was applied to extract endocrine disrupting chemicals (EDCs) consisting of three phthalate esters (PEs) and bisphenol A (BPA) associated with PM_2.5 (airborne particulate matter with aerodynamic diameter ≤ 2.5 µm). Gas chromatography-tandem mass spectrometry (GC-MS/MS) was used for determination of the analytes. These analytes were first ultrasonically desorbed from PM_2.5 in a 10% acetone aqueous solution. DLLME was used to first preconcentrate the analytes; the sample solution, still in the same vial, was then subjected to VA-µ-SPE. The synergistic effects provided by the combination of the microextraction techniques provided advantages such as high enrichment factors and good cleanup performance. Various extraction parameters such as type and volume of extractant solvent (for DLLME), and type of sorbent, extraction time, desorption solvent, volume of desorption solvent and desorption time (for µ-SPE) were evaluated. Multi-walled carbon nanotubes were found to be the most suitable sorbent. This procedure achieved good precision with intra- and inter-day relative standard deviations of between 1.93 and 9.95%. Good linearity ranges (0.3-100 ng/mL and 0.5-100 ng/mL, depending on analytes), and limits of detection (LODs) of between 0.07 and 0.15 ng/mL were obtained. The method was used to determine the levels of PEs and BPA in ambient air, with concentrations ranging between below the limits of quantification and 0.48 ng/m³. DLLME-VA-µ-SPE-GC-MS/MS was demonstrated to be suitable for the determination of these EDCs present in PM_2.5.

Fully automated graphitic carbon nitride-based disposable pipette extraction-gas chromatography-mass spectrometric analysis of six polychlorinated biphenyls in environmental waters

A fully automated online emulsification-enhanced disposable pipette extraction-gas chromatography-mass spectrometry (EE-DPX-GC-MS) method has been developed for the extraction of six polychlorinated biphenyls (PCBs) from environmental waters. An in-house prepared material, graphitic carbon nitride (g-C₃N₄), was used as sorbent in a home-packed DPX device. The six PCBs studied include PCB 10, 28, 52, 153, 138 and 180. g-C₃N₄ was characterized successfully by X-ray diffraction, elemental analysis, scanning electron microscopy, Fourier-transform infrared and Raman spectroscopy. As a C-N analogue of graphite, the two-dimensional structure of g-C₃N₄ allows rapid analyte adsorption and desorption to take place. With a significant number of nitrogen functionalities in g-C₃N₄, the material dispersed well in aqueous sample, increasing the active surface area of contact between the sorbent and the sample. When coupled with a pre-emulsification step, PCBs in each portion of sample could be efficiently extracted by g-C₃N₄ within 20 s of gentle turbulence. Under the most favorable conditions, the automated online EE-DPX-GC-MS method achieved wide dynamic working ranges with good linearity (r² ≥ 0.998) for all analytes. Limits of detection ranging between 4.35 and 7.82 ng L^-1 were attained, with enrichment factors of between 34 and 57 and relative standard deviations (RSDs) for intra- and inter-day precision of ≤ 8.95% and ≤ 12.6%, respectively. Absolute recoveries were between 69.3% and 109%. The fully automated online EE-DPX-GC-MS approach was applied to industrial wastewaters and reservoir waters where good relative recoveries of PCBs of between 89.3% and 105% were obtained, with RSDs ≤ 11.6%.

Enhancing enrichment ability of ZIF-8 mixed matrix membrane microextraction by reverse micelle strategy for analysis of multiple ionizable bioactive components in biological samples

Recent research aimed at the design of mixed-matrix membrane (MMM) to be used for microextraction emphasized on membrane extraction phase with high surface area and porosity. This study explored the influence that surfactants have on MMM extraction efficiency for the first time. The zeolitic imidazolate framework 8-based MMM (ZIF-8-MMM) was synthesized by in situ self-assembly of ZIF-8 on the inner wall of a hollow fiber membrane with the aim of fabricating a microextraction device. By prompting the encapsulation of ionizable analytes in the polar core of reverse micelles, the presence of surfactants in extraction solvent assisted the dissolution of analytes in the fiber membrane lumen and enhanced their adsorption onto ZIF-8. Notably, hereby a microextraction method based on the novel ZIF-8-MMM-reverse micelle (ZIF-8-MMM-RM) system was developed and employed for the extraction and quantitation of two alkaloids (berberine and jatrorrhizine) and two flavonoids (wogonin and wogonoside) in biological samples. The main factors affecting microextraction performance, identity of the extraction solvent, surfactant concentration, sample solution pH and extraction time, were investigated in detail. The method showed good linearity (r² > 0.99) and repeatability (RSD < 10%), low limits of detection (0.10-0.31 ng mL^-1) and high relative recoveries (90.03-98.84%). The enrichment factor values ranged between 48.47 and 54.96. Reverse micelle formation prompted by surfactant addition was demonstrated to effectively assist the extraction of multiple ionizable analytes from biological samples, resulting in a marked improvement of ZIF-8-MMM extraction performance.