Copper(II)-coated Fe3O4 nanoparticles as an efficient enzyme mimic for colorimetric detection of hydrogen peroxide

S-Doping Regulated Iron Spin States in Fe-N-C Single-Atom Material for Enhanced Peroxidase-Mimicking Activity at Neutral pH

Designing biomimetic nanomaterials with peroxidase (POD)-like activity at neutral pH remains a significant challenge. An S-doping strategy is developed to afford an iron single-atom nanomaterial (Fe1@CN-S) with high POD-like activity under neutral conditions. To the best of knowledge, there is the first example on the achievement of excellent POD-like activity under neutral conditions by regulating the active site structure. S-doping not only promotes the dissociation of the N─H bond in 3,3″,5,5″-tetramethylbenzidine (TMB), but also facilitates the desorption of OH* by the transformation of iron species' spin states from middle-spin (MS FeII) to low-spin (LS FeII). Meanwhile, LS FeII sites typically have more unfilled d orbitals, thereby exhibiting stronger interactions with H2O2 than MS FeII, which can enhance POD-like activity. Finally, a one-pot visual detection of glucose at pH 7 is performed, demonstrating the best selectivity and sensitivity than previous reports.

Sensing the invisible: Ultrasensitive and selective colorimetric detection of E. coli O157:H7 based on masking the peroxidase-mimetic activity of aptamer-modified Au/Fe3O4

Escherichia coli O157:H7 (E. coli O157:H7) emerges as a significantly worrisome pathogen associated with foodborne illnesses, emphasizing the imperative for creating precise detection tools. In this investigation, we developed a sensitive colorimetric biosensor for detecting E. coli O157:H7. It was constructed using a nanozyme comprised of Au@Fe3O4 NPs, which was fabricated and subsequently modified with an aptamer (Apt). The nanozyme harnesses its inherent peroxidase-like activity to facilitate the transformation of reduced TMB into its oxidized form in the presence of H2O2, resulting in a noticeable shift to a blue color. However, the presence of E. coli O157:H7 effectively diminished the absorbance of oxidized TMB. Consequently, the normalized absorbance at 652 nm demonstrates a linear decrease corresponding to concentrations of E. coli O157:H7 within the range of 101 to 108 CFU mL-1 with a low limit of detection (LOD, S/N = 3) of 3 CFU mL-1.

Colorimetric sensing of hydrogen peroxide using capped Morus nigra-sawdust deposited zinc oxide nanoparticles via Trigonella foenum extract

Hydrogen peroxide (H2O2) is one of the main byproducts of most enzymatic reactions, and its detection is very important in disease conditions. Due to its essential role in healthcare, the food industry, and environmental research, accurate H2O2 determination is a prerequisite. In the present work, Morus nigra sawdust deposited zinc oxide (ZnO) nanoparticles (NPs) were synthesized by the use of Trigonella foenum extract via a hydrothermal process. The synthesized platform was characterized by various techniques, including UV-Vis, FTIR, XRD, SEM, EDX, etc. FTIR confirmed the presence of a Zn‒O characteristic peak, and XRD showed the hexagonal phase of ZnO NPs with a 35 nm particle size. The EDX analysis confirmed the presence of Zn and O. SEM images showed that the as-prepared nanoparticles are distributed uniformly on the surface of sawdust. The proposed platform (acetic acid-capped ZnO NPs deposited sawdust) functions as a mimic enzyme for the detection of H2O2 in the presence of 3,3',5,5'-tetramethylbenzidine (TMB) colorimetrically. To get the best results, many key parameters, such as the amount of sawdust-deposited nanoparticles, TMB concentration, pH, and incubation time were optimized. With a linear range of 0.001-0.360 μM and an R2 value of 0.999, the proposed biosensor's 0.81 nM limit of quantification (LOQ) and 0.24 nM limit of detection (LOD) were predicted, respectively. The best response for the proposed biosensor was observed at pH 7, room temperature, and 5 min of incubation time. The acetic acid-capped sawdust deposited ZnO NPs biosensor was also used to detect H2O2 in blood serum samples of diabetic patients and suggest a suitable candidate for in vitro diagnostics and commercial purposes.

Mesoporous silica-stabilized magnetite nanoparticles with peroxidase-like activities for sensitively detecting cholesterol in animal-derived foods

Sensitive detection of cholesterol in animal-derived foods is crucial for maintaining human healthy diets. In this study, an elegant approach utilizing inorganic nanozyme-based magnetic mesoporous silica nanoparticles (MMSNs) for the highly sensitive detection of cholesterol in animal-derived food products was reported. The results revealed the fabricated MMSNs exhibited remarkably intrinsic peroxidase (POD)-like catalytic activities with improved affinity, and the catalytic behavior aligned well with Michaelis-Menten equation. In addition, the data indicated that the MMSNs enabled visual colorimetric detection of cholesterol with a remarkably low detection limit of 7.12 μM by combining catalytic oxidation with cholesterol oxidase (ChOx). Furthermore, the prepared MMSNs were successfully employed for assessing cholesterol content in milk and egg yolk samples, indicating potential applications for cholesterol detection in animal-derived foods in future.

Synthesis, Characterization, and Application of Magnetized Lanthanum (III)-Based Metal-Organic Framework for the Organic Dye Removal from Water

A hybrid composite based on metal-organic framework (MOF) was chemically fabricated by embedding the magnetic Fe3O4 nanoparticles within amino-functionalized porous La-MOF (MOF/NH2) to produce a highly efficient and reusable composite of MOF/NH2/Fe3O4. Different proper techniques were used for the characterization of surface morphology and chemical arrangement of the prepared MOF/NH2/Fe3O4 composite. The characterization results using various techniques including Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM), Brunauer, Emmett, and Teller analysis (BET), and vibrating sample magnetometer (VSM) approved the successful fabrication of MOF with amino arms on its surface besides the well magnetization using magnetic nanoparticles. The MOF/NH2/Fe3O4 composite showed enhanced adsorption capacity (618 mg/g) toward methyl orange (MO) anionic dye which is higher than many commercial reported adsorbents due to the presence of many types of adsorption sites (NH2 groups and lanthanum sites), large surface area of MOF, and the synergetic effect of magnetic nanoparticles. Moreover, the MOF/NH2/Fe3O4 composite showed selective adsorption of MO dye from dye mixtures owing to the electrostatic attraction. Also, the MOF/NH2/Fe3O4 composite retained over 90% of its efficiency for the dye removal even after six successive cycles. So, the present study provided a practical strategy for the design of functional MOF hybrid composites. Furthermore, due to the adaptability of its architectural form, it is a potential adsorbent material for industrial wastewater treatment uses.

Mo and Zn-Dual doped CuxO nanocrystals confined High-Conductive Cu arrays as novel sensitive sensor for neurotransmitter detection

The development of sensitive and selective sensors using facile and low-cost methods for detecting neurotransmitter molecules is a critical factor in the health care system in regard to early diagnosis. In this research, an electrocatalyst derived from Mo,Zn dual-doped Cu_xO nanocrystals-based layer coating over one-dimensional copper nanowire arrays (Mo,Zn-Cu_xO/CuNWs) was successfully designed using a facile electrodeposition approach and used as an electrochemical sensor for non-enzymatic dopamine (DA) neurotransmitter detection. The synergistic effect caused by the dual-doping effect along with its excellent conductivity produced a large electroactive surface area and an improved hetero-charge transfer, thereby boosting DA sensing ability with a low limit detection of 0.32 µM, wide-range of detection (0.5 µM - 3.9 mM), long-term stability (5 weeks), and high selectivity in phosphate buffer solution (pH 7.4). Also, the sensor accurately determined DA in real blood serum-spiked solutions. The achieved results evidenced that the Mo,Zn-Cu_xO/CuNWs derived sensor is highly suitable for DA detection. Therefore, it also opens new windows for the development of low-cost, accurate, high-performance, and stable sensors for other neurotransmitter sensing for the purposes of better health care and early diagnosis.

A Review on Metal- and Metal Oxide-Based Nanozymes: Properties, Mechanisms, and Applications

Since the ferromagnetic (Fe3O4) nanoparticles were firstly reported to exert enzyme-like activity in 2007, extensive research progress in nanozymes has been made with deep investigation of diverse nanozymes and rapid development of related nanotechnologies. As promising alternatives for natural enzymes, nanozymes have broadened the way toward clinical medicine, food safety, environmental monitoring, and chemical production. The past decade has witnessed the rapid development of metal- and metal oxide-based nanozymes owing to their remarkable physicochemical properties in parallel with low cost, high stability, and easy storage. It is widely known that the deep study of catalytic activities and mechanism sheds significant influence on the applications of nanozymes. This review digs into the characteristics and intrinsic properties of metal- and metal oxide-based nanozymes, especially emphasizing their catalytic mechanism and recent applications in biological analysis, relieving inflammation, antibacterial, and cancer therapy. We also conclude the present challenges and provide insights into the future research of nanozymes constituted of metal and metal oxide nanomaterials.

One-step colorimetric detection of Staphylococcus aureus based on target-induced shielding against the peroxidase mimicking activity of aptamer-functionalized gold-coated iron oxide nanocomposites

Staphylococcus aureus (S. aureus) is one of the most threatened food-borne pathogens. Thus, it is necessary to establish fast, portable and reliable tools to realize the identification of S. aureus. Herein, the authors describe an effective colorimetric-based biosensor for the detection of S. aureus in multiple types of samples. Initially, a nanozyme composed of gold and iron oxide nanoparticles was synthesized and further modified with S. aureus-specific aptamer via Au-S bond. By utilizing the intrinsic peroxidase-like activity of the above magnetic conjugates, 3,3',5,5'-tetramethylbenzidine (TMB) can be transferred to oxTMB by oxidation of hydrogen peroxide (H₂O₂), resulting in a visible blue color. However, the introduction of S. aureus can turn off the UV-vis absorbance signals of TMB-H₂O₂ system, due to the identification property of the nanozyme probe. Consequently, the optical density of the mixed solution measured at 652 nm decreased linearly as the concentration of S. aureus increased from 10 to 10⁶ CFU mL^-1, with the visible limit of detection as low as 10 CFU mL^-1. The as-prepared sensor can detect S. aureus in spiked water, milk and urine samples quantitatively during 12 min without any pre-enrichment, separation or washing steps. In our perception, the one-step colorimetric assay show promise in practical on-site detection of S. aureus.

Biosensing platform on ferrite magnetic nanoparticles: Synthesis, functionalization, mechanism and applications

Ferrite magnetic nanoparticles (FMNPs) are gaining popularity to design biosensors for high-performance clinical diagnosis. The fusion of information shows that FMNPs based biosensors require well-tuned FMNPs as detection probes to produce large and specific biological signals with minimal non-specific binding. Nevertheless, there is a noticeable lacuna of information to solve the issues related to suitable synthesis route, particle size reduction, functionalization, sensitivity towards targeted intercellular biological tiny particles, and lower signal-to-noise ratio. Therefore it allows exploring unique characteristics of FMNPs to design a suitable sensing device for intracellular measurements and diseases detection. This review focuses on the extensively used synthesis routes, their advantages and limitations, crystalline structure, functionalization, along with recent applications of FMNPs in biosensors, taking into consideration their analytical figures of merit and range of linearity. This work also addresses the current progress, key factors for sensitivity, selectivity and productivity improvement along with the challenges, future trends and perspectives of FMNPs based biosensors.

A multicolor sensing system for simultaneous detection of four foodborne pathogenic bacteria based on Fe3O4/MnO2 nanocomposites and the etching of gold nanorods

Food safety problems attributed to foodborne pathogenic bacteria seriously endanger human health and cause substantial economic losses. Novel assays for rapid and sensitive identification of foodborne pathogenic bacteria are highly desired. In this study, a multicolor sensing system has been established for simultaneous determination of four foodborne bacteria by exploiting oxidase mimicking activity of aptamer-functionalized manganese dioxide-coated ferriferrous oxide (apt-Fe₃O₄/MnO₂) nanocomposites and oxTMB etching of gold nanorods (AuNRs). Apt-Fe₃O₄/MnO₂ nanocomposites were used as capture probes to recognize and capture specific bacteria. The captured bacteria blocked the catalytic sites of the magnetic conjugate, which inhibited the catalyzation of oxTMB and further reduced the etching of AuNRs. Consequently, the longitudinal shift of AuNRs decreased linearly with the increase of the concentration of bacteria ranging from 10 to 10⁶ CFU mL^-1. Instrumental detection limits for S. aureus, L. monocytogenes, E. coli O157:H7 and V. parahaemolyticus reached down to 1.3 CFU mL^-1, 1.2 CFU mL^-1, 1.3 CFU mL^-1 and 1.4 CFU mL^-1, respectively. And their visual detection limit was as low as 10 CFU mL^-1. The whole detection process only needs 40 min, suggesting that this method is promising in on-site detection of bacteria.

Biomedical applications of metal–organic framework (MOF)-based nano-enzymes

In the present review, the types and activities of nanometer-sized enzymes are summarized, with recent progress of nanometer-sized enzymes in the field of biomedical detection.

Colorimetric method for Salmonella spp. detection based on peroxidase-like activity of Cu(II)-rGO nanoparticles and PCR

Development of a rapid and sensitive method for Salmonella spp. detection is of great importance for ensuring food product safety due to its low infective dose. In this study, a colorimetric method based on the peroxidase-like activity of Cu(II)-modified reduced graphene oxide nanoparticles (Cu²⁺-rGO NPs) and PCR was successfully developed to detect Salmonella spp. in milk. Under optimal conditions, the developed colorimetric method exhibited high sensitivity and strong specificity for Salmonella spp. detection. The limit of detection was 0.51 CFU/mL with a linear range from 1.93 × 10¹ to 1.93 × 10⁵ CFU/mL. A specificity study demonstrated that this method can specifically distinguish Salmonella typhimurium and Salmonella enteritidis from other foodborne pathogens. The application of the proposed method for milk sample detection was also validated, and the recovery rates of S. typhimurium in spiked milk sample ranged from 102.84% to 112.25%. This colorimetric sensor exhibits enormous potential for highly sensitive detection of bacteria in milk sample.

Cu2O nanocubes-grafted highly dense Au nanoparticles with modulated electronic structures for improving peroxidase catalytic performances

Based on the intermediate states of metal ions in metal oxide nanomaterials (NMs) that acted as the primary active species, the design of high-performance nanozymes has greatly stimulated current research in diverse biomedical applications. Herein, Cu₂O nanocubes-grafted highly dense Au nanoparticles (NPs) was developed as an appealing nanozyme for H₂O₂ colorimetric sensor and antioxidant detections. The obtained Au/Cu₂O heterostructures show efficient electron-transfer from metallic NPs to Cu₂O nanocubes owing to the difference of Fermi energy between two components. The modulated electronic structure of Au/Cu₂O hybrids enables them to possess enhanced peroxidase catalytic activity for the oxidation of 3, 3', 5, 5'-tetramethylbenzidine (TMB) in the presence of H₂O₂, which is about 32% higher than that of pristine Cu₂O nanocubes. Then, an excellent H₂O₂ colorimetric sensor was established by using Au/Cu₂O heterostructures with a low limit of detection (LOD) of 0.054 μM, which is much lower than the H₂O₂ allowance level of US FDA regulations (ca.15 μM, 0.05 wt%). The obtained Au/Cu₂O nanoproducts exhibit pronounced long-time stability with 95% peroxidase activity maintained after keeping them for 30 days, while residual 64.5% via Cu₂O nanocubes. Furthermore, we assessed the anti-oxidative behavior of three natural antioxidants (tannic acid, gallic acid, tartaric acid) with the LODs as low as 0.039, 0.16 and 1.55 μM, respectively, and the antioxidant capacity in the following order: tannic acid > gallic acid > tartaric acid. Therefore, it is believed that the as-prepared Au/Cu₂O nanozymes have promising potential applications in fields of biomedicine and food safety.

Enhanced peroxidase-like activity of Fe3O4-sodium lignosulfonate loaded copper peroxide composites for colorimetric detection of H2O2 and glutathione

In this paper, the composites of Fe₃O₄ modified by sodium lignosulfonate and copper peroxide (Fe₃O₄@CP) were produced by a simple two-step method, and their morphology and composition were featured in Field emission scanning electron microscopy, X-ray powder diffraction, X-ray diffraction and Fourier transform infrared. Then, Fe₃O₄@CP catalyzed the oxidation of colorless 3,3',5,5'-tetramethylbenzidine to blue oxide in the presence of H₂O₂, indicating that it had good catalytic performance. Further, the experimental conditions were optimized, including time, pH, temperature and material concentration. The kinetic analysis results showed that Fe₃O₄@CP exhibited excellent catalytic performance and its catalytic kinetic plot conformed to the Michaelis-Menten equation and the catalytic mechanism was consistent with the ping-pong mechanism. Finally, a H₂O₂ colorimetric assay with a linear range of 0.2-300 μM and a detection limit of 0.11 μM was constructed. In addition, due to the decolorization reaction of ox-TMB with glutathione and the scavenging effect of GSH on hydroxyl radicals (·OH), a glutathione colorimetric assay was further constructed with a linear range of 0.2-40 μM and a detection limit of 0.05 μM. It also verified that the assay had excellent selectivity and stability and could be utilized to detect actual samples.

Peroxidase-like Au@Pt nanozyme as an integrated nanosensor for Ag+ detection by LSPR spectroscopy

Here we report the peroxidase-like Au@Pt nanozyme as an integrated nanosensor for selective detection of silver ions (Ag⁺), where the nanozyme plays the roles as both the signal trigger and reporter simultaneously. This method relies on two critical chemical reactions, including (1) the unique inhibitory effect of Ag⁺ on the nanozyme triggered H₂O₂ decomposition at weak acid environment and (2) H₂O₂ induced Ag⁺ reduction onto the nanozyme surface at basic environment, leading to a blueshift in the localized surface plasmonic resonance wavelength (LSPR λ_max) of the nanosensor. With this simple strategy, we demonstrated the sensitive and selective detection of Ag⁺ over a dynamic range from 0.5 to 1000 μM with a limit of detection (LOD) of 500 nM by UV-visible spectroscopy, which is below the permitted level of Ag⁺ in drinking water by U.S. Environmental Protection Agency (EPA). This method also exhibits satisfying recovery efficiency for Ag⁺ detection both in tap water and spring water from the Yuelu Mountain. With this satisfying sensing performance and excellent stability of nanoprobes, this strategy is promising for the detection of Ag⁺ in environment monitoring and food safety analysis.

Colorimetric determination of Hg2+ based on the mercury-stimulated oxidase mimetic activity of Ag3PO4 microcubes

Four kinds of Ag₃PO₄ materials were prepared by controlling the experimental conditions, which were developed as oxidase mimics. Experimental results showed that different synthesis methods led to distinct crystal structures, morphologies, and surface properties, which contributed to diverse oxidase-like activities of Ag₃PO₄ materials. Among them, Ag₃PO₄ microcubes (APMCs) can efficiently catalyze the oxidation of colorless 3,3',5,5'-tetramethylbenzidine in the presence of dissolved oxygen to form a blue-colored oxide, presenting the best intrinsic oxidase mimetic ability. The higher-energy [110] facets with more oxygen vacancies exposed and more active sites coupled with more negative charge and larger specific surface area of APMCs contributed to its enhanced oxidase mimetic performance. Besides, mercury ions were proved to remarkably and selectively stimulate the oxidase-like ability of APMCs owing to the formation of Ag-Hg amalgam on its surface. Based on the stimulating effect of Hg²⁺ towards APMCs, a simple and rapid method for colorimetric determination of Hg²⁺ was thus established via the significant signal amplification and megascopic color variation. Under the optimal conditions, the sensing system showed a good linear relationship ranging from 0.1 to 7.0 μM and a detection limit of 20 nM for Hg²⁺, exhibiting high selectivity and good colour stability. Moreover, the colorimetric method was successfully applied to determine Hg²⁺ in real water samples. Considering these advantages, the developed colorimetric sensing system is expected to hold bright prospects for trace determination of Hg²⁺ in biological, environmental, and food samples. Graphical abstract The preparation process of Ag₃PO₄ materials and Hg²⁺-stimulated enhanced oxidase-like ability of Ag₃PO₄ microcubes in catalyzing the oxidation of TMB to generate a typical blue color, which can be applied in rapid and ultrasensitive detection of Hg²⁺ visually.

UV-assisted one-pot synthesis of bimetallic Ag-Pt decorated reduced graphene oxide for colorimetric determination of hydrogen peroxide

Bimetallic Ag-Pt nanoparticles decorated on the surface of reduced graphene oxide (Ag-Pt/rGO) were designed and selected as a nanozyme for the assay of hydrogen peroxide. The nanocomposites were prepared through a one-pot reduction of potassium chloroplatinate, silver nitrate, and graphene oxide under ultraviolet irradiation without using any extra chemical reducing agents or surfactants. The successful formation of Ag-Pt/rGO nanocomposites was confirmed by transmission electron microscopy, energy disperse spectroscopy mapping, X-ray photoelectron spectroscopy, and X-ray diffraction analysis. Significantly, Ag-Pt/rGO nanocomposites possessed excellent peroxidase-like activity toward the catalytic oxidation of 3,3',5,5'-tetramethylbenzidine to form a blue product in the presence of hydrogen peroxide. Steady-state kinetics studies suggested that Ag-Pt/rGO nanocomposites had high affinity to hydrogen peroxide. Based on these properties, a convenient and sensitive method for the colorimetric determination of hydrogen peroxide was developed. Under optimal conditions, the absorbance at 652 nm increases linearly in the 10-100 μM and 100 μM-1 mM ranges of hydrogen peroxide concentration, and the detection limit is 0.9 μM (S/N = 3). The method was successfully applied to the determination of hydrogen peroxide in real water samples. Graphical abstract Ag-Pt/rGO nanocomposites were prepared by a one-pot UV irradiation method and used as a novel nanozyme for colorimetric determination of H₂O₂.

Expanded mesoporous silica-encapsulated ultrasmall Pt nanoclusters as artificial enzymes for tracking hydrogen peroxide secretion from live cells

Design of synthetic structures that possess the similar functions to natural enzymes held great promise in environmental detection and biomedical application. Herein, a new concept for the fabrication of solid-supported catalysts as peroxidase mimic have been proposed to realize high-catalytic activity and stability by utilizing expanded mesoporous silica (EMSN)-encapsulated Pt nanoclusters. Compared with PtNCs, the introduction of amino group modified EMSN would enrich H₂O₂ on the surface of PtNCs and increase the catalytic sites for H₂O₂ decomposition, which gave rise to the higher catalytic activity of EMSN-PtNCs over a broad pH range, especially in weakly acidic and neural solutions. This would facilitate their applications for real-time monitoring the secretion of H₂O₂ from living cancer cells stimulated by various anticancer drugs. Our findings not only pave the way to use porous matrix as the structural component for the design of the biomimetic catalysts, but also provide a simple and reliable platform to monitor H₂O₂ released from living cells in real time, which holds great potential for elucidating the biological roles of H₂O₂ and underlying molecular mechanisms of drug cytotoxicity as well as drug therapeutic effects.

An Au@NH2-MIL-125(Ti)-based multifunctional platform for colorimetric detections of biomolecules and Hg2+

Au@NH₂-MIL-125(Ti) was fabricated and explored as a multifunctional platform for sensitive colorimetric detections of biomolecules and Hg²⁺.

Peroxidase-like activity of Fe3O4@fatty acid-nanoparticles and their application for the detection of uric acid

Schematic diagram of colorimetric uric acid sensor by utilizing uricase and Fe₃O₄@C₇ catalyzed TMB oxidation.

Accelerating the peroxidase-like activity of MoSe2 nanosheets at physiological pH by dextran modification

One-pot synthesis of dextran-modified MoSe₂ nanosheets with peroxidase-like activity at physiological pH for bio-sensing.