Gold nanoparticles anchored onto three-dimensional graphene: simultaneous voltammetric determination of dopamine and uric acid

A novel electrochemical platform based on mesoporous silica/titania and gold nanoparticles for simultaneous determination of norepinephrine and dopamine

An amorphous and mesoporous silica/titania (SiTi) material was synthesized by sol-gel method and its surface was modified with gold nanoparticles (AuNP) previously stabilized in a chitosan solution. The presence of small AuNP, with diameter lower than 10 nm was confirmed by transmission electron microscopy (TEM) and UV-Vis spectroscopy. Carbon paste electrodes were prepared to test the electrochemical properties by using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in [Fe(CN)₆]^3-/4- solution probe whereby the material silica-titania/gold nanoparticles (SiTi/AuNP) showed a huge improvement in the redox peak current and low charge transfer resistance. This electrode presented a good response for both norepinephrine and dopamine by means of square wave voltammetry (SWV) measurements; great sensitivity for both analytes, in an extensive linear range, was obtained. The limits of detection were 0.35 μmol L^-1 and 0.57 μmol L^-1 for norepinephrine and dopamine, respectively. Additionally, this electrode showed high selectivity for both analytes and it was applied in the simultaneous determination of norepinephrine and dopamine. The sensor was also tested in simulated biological fluids presenting a good recovery. The SWV electrochemical response of norepinephrine was also investigated in the presence of possible interferers such as uric acid, ascorbic acid and glucose and there was no significant interference. The prepared electrode also exhibits good reproducibility for norepinephrine detection, with relative standard deviation of 5.19%.

Electrochemical sensor based on dual-template molecularly imprinted polymer and nanoporous gold leaf modified electrode for simultaneous determination of dopamine and uric acid

A novel electrochemical sensor based on dual-template molecularly imprinted polymer (MIP) with nanoporous gold leaf (NPGL) was established for the simultaneous determination of dopamine (DA) and uric acid (UA). NPGL acts as an enlarged loading platform to enhance sensing capacity, and the MIP layer was synthesized in situ in the presence of monomer and dual templates (DA and UA) to provide specific recognition. Under the optimal conditions, the sensor shows a good linear range of 2.0~180 μM for DA at a working potential of 0.15 V (vs. Ag/AgCl) and 5.0~160 μM for UA at 0.35 V (vs. Ag/AgCl), with the respective detection limit of 0.3 μM and 0.4 μM (S/N = 3). Good selectivity of the sensor to its dual templates was confirmed as the sensing signals are significantly different between templates and interfering species. The responses maintained higher than 96% of the initial values after 30-day storage, and the day-to-day relative standard deviation is less than 3.0%. Real sample simultaneous determination of DA and UA was conducted with bovine serum, and the results were in good agreement with those from high-performance liquid chromatography. It can be concluded that this work offers a reliable, facile, fast, and cost-effective method of simultaneous quantification of two or more chem-/bio-molecules. Graphical abstract.

A sensitive method to determine dopamine in the presence of uric acid based on In2O3 nanosheet arrays grown on 3D graphene

A nonenzymatic voltammetric assay for dopamine (DA) was developed based on the combination of three-dimensional graphene (3D Gr) and indium oxide nanosheet arrays (In₂O₃ NSAs). 3D Gr was prepared by chemical vapor deposition (CVD), and In₂O₃ NSAs were grown on its surface by hydrothermal synthesis. The results show that 3D Gr maintains a good porous structure (200 μm), and the pore size of In₂O₃ NSAs is 0.50 μm. Differential pulse voltammetry (DPV) is mainly used to determine the electrochemical properties of In₂O₃ NSAs/3D Gr. It possesses a sensitivity of 2.69 μA·μM^-1·cm^-2 towards DA (5-60 μM) at 0.14 V, and the detection limit (LOD) is 0.10 μM (S/N = 3). The recoveries obtained for spiked samples in the real sample detection is 105 (± 8)%. Graphical abstractSchematic representation of DA sensitive detection by growing In₂O₃ nanosheets arrays on three-dimentional graphene modified ITO.

Facile Synthesis of Eggshell Membrane-Templated Au/CeO2 3D Nanocomposite Networks for Nonenzymatic Electrochemical Dopamine Sensor

Dopamine acts as a neurotransmitter to regulate a variety of physiological functions of the central nervous system. Thus, the fabrication of electrochemical active nanomaterials for sensitive dopamine detection is extremely important for human health. Herein, we constructed a highly efficient dopamine nonenzymatic biosensor using eggshell membrane (ESM) as a 3D network-like carrier-loaded Au and CeO₂ nanocomposites. This approach has led to the uniform distribution of CeO₂ and Au nanoparticles on the surface of ESM. The structure and properties of the as-prepared ESM templated Au/CeO₂ (ESM-AC) nanocomposites were characterized. The electrochemical properties of non-enzymatic oxidation of dopamine by ESM-AC electrode were studied by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The detection limit of the ESM-AC modified electrode for dopamine is 0.26 μM with a linear range from 0.1 to 10 mM. The ESM-AC-modified electrode performs a higher catalytic activity for dopamine electrocatalytic oxidation than that ESM-templated CeO₂ (ESM-C) electrode, which is mainly due to the unique structure of ESM and more active sites provided from Au. Collectively, this biological waste-ESM provides a cheap and unique template for the preparation of 3D network-like nanostructures and expands the application in electrochemical dopamine detection. ESM-AC nanocomposites prepared from biological waste was successfully modified on the surface of glassy carbon electrode and a dopamine-based electrochemical biosensor was constructed.

Electrochemical sensor for sensitive detection of luteolin based on multi-walled carbon nanotubes/poly(3,4-ethylenedioxythiophene)–gold nanocomposites

An electrochemical sensor based on MWCNTs/PEDT–Au nanocomposite modified GCE for electrochemical determination of luteolin was presented.