A porous aromatic framework as a versatile fiber coating for solid-phase microextraction of polar and nonpolar aromatic organic compounds

Quinoline Bridging Hyperconjugated Covalent Organic Framework as Solid-Phase Microextraction Coating for Ultrasensitive Determination of Phthalate Esters in Water Samples

Phthalate esters (PAEs) are widely distributed in the environment, and this has caused serious health and safety concerns. Development of rapid and ultrasensitive identification and analysis methods for phthalate esters is urgent and highly desirable. In this work, a novel nitrogen-rich covalent organic framework (N-TTI) derived quinoline bridging covalent organic framework (N-QTTI) was fabricated and used as a solid-phase microextraction (SPME) coating for the ultrasensitive determination of phthalate esters in water samples. The physical and chemical properties of N-QTTI were investigated sufficiently. The N-QTTI-coated fiber demonstrates a superior enrichment performance than either the N-TTI-coated fiber or commercial fibers under the optimized SPME conditions. For the first time, we propose a semi-immersion strategy for the extraction of PAEs from water samples based on N-QTTI-coated SPME fibers. Combined with gas chromatography-mass spectrometry (GC-MS), the developed method N-QTTI-SPME-GC-MS exhibits a wide linear range with a satisfactory linearity (R2 ≥ 0.995). The limits of detection (LOD, S/N = 3) and the limits of quantification (LOQs, S/N = 10) were 0.17-1.70 and 0.57-5.60 ng L-1, respectively. The repeatability of the new method was examined using relative standard deviations (RSDs) between intraday and interday data, which were 0.38-7.98% and 1.22-6.60%, respectively. The spiked recoveries at three levels of 10, 100, and 1000 ng L-1 were in the range of 90.0-106.2% with RSDs of less than 7.48%. The enrichment factors ranged from 291 to 17180. When compared to previously published works, the LODs of the newly established method were improved 5-5400 times, and the enrichment factors were increased by at least 8 times. The absorption mechanism was investigated by X-ray photoelectron spectroscopy and noncovalent interaction force analysis. The technique was successfully employed for detecting PAEs in water samples.

Porous aromatic framework coated stir bar sorptive extraction coupled with gas chromatography for the analysis of 16 polycyclic aromatic hydrocarbons in atmospheric particles and environmental water samples

In this work, porous aromatic frameworks (PAFs) with different pore size were evaluated for simultaneous adsorption of 16 polycyclic aromatic hydrocarbons (PAHs) with large difference in polarity and molecular size. Two other porous organic polymers containing electron pushing/withdrawing group were investigated along for a comparison, and PAF-120 with the pore size of appr. 2.1 nm exhibited the highest extraction efficiency. Based on water contact angle and molecular dynamics simulation, the adsorption of 16 PAHs on PAF-120 was attributed to hydrophobic interaction, π-π interaction and molecular sieving effect. PAF-120/PDMS coated stir bar was then prepared by physical adhesion, and a method of stir bar sorptive extraction-gas chromatography-flame ionization detector was established for trace PAHs analysis in environmental samples. Under the optimal experimental conditions, the limits of detection (S/N = 3) for 16 PAHs were found to be in the range of 42-375 ng/L, with the relative standard deviations of 4.1-14.6% (n = 7). The enrichment factors varied from 31 (Indeno[1,2,3-cd]pyrene) to 80-fold (anthracene), with the maximal enrichment factor of 100-fold. The proposed method was applied to the analysis of PAHs in local environmental water and atmospheric particle samples. None of the 16 PAHs were detected in the collected water samples. While for the collected atmospheric particles, 12 PAHs were detected in fine particulate matter (PM_2.5) within the range of 0.6-2.8 ng/m³. For inhalable particulate matter (PM₁₀) and total suspended particulate matter (TSP), 16 PAHs were all detected in the range of 0.6-3.8 ng/m³ and 0.6-5.9 ng/m³, respectively. Quantitative recoveries were obtained in recovery test, demonstrating the accuracy and application potential of the proposed method.