ε-Poly-L-lysine-protected Ti3C2 MXene quantum dots with high quantum yield for fluorometric determination of cytochrome c and trypsin

Recent Advancements in MXene-Based Biosensors for Health and Environmental Applications-A Review

Owing to their unique physicochemical properties, MXenes have emerged as promising materials for biosensing applications. This review paper comprehensively explores the recent advancements in MXene-based biosensors for health and environmental applications. This review begins with an introduction to MXenes and biosensors, outlining various types of biosensors including electrochemical, enzymatic, optical, and fluorescent-based systems. The synthesis methods and characteristics of MXenes are thoroughly discussed, highlighting the importance of these processes in tailoring MXenes for specific biosensing applications. Particular attention is given to the development of electrochemical MXene-based biosensors, which have shown remarkable sensitivity and selectivity in detecting various analytes. This review then delves into enzymatic MXene-based biosensors, exploring how the integration of MXenes with enzymes enhances sensor performance and expands the range of detectable biomarkers. Optical biosensors based on MXenes are examined, focusing on their mechanisms and applications in both healthcare and environmental monitoring. The potential of fluorescent-based MXene biosensors is also investigated, showcasing their utility in imaging and sensing applications. In addition, MXene-based potential wearable biosensors have been discussed along with the role of MXenes in volatile organic compound (VOC) detection for environmental applications. Finally, this paper concludes with a critical analysis of the current state of MXene-based biosensors and provides insights into future perspectives and challenges in this rapidly evolving field.

Fabrication Methods, Structural, Surface Morphology and Biomedical Applications of MXene: A Review

Recently, two-dimensional (2-D) layered materials have revealed outstanding properties and play a crucial role for numerous advanced applications. The emerging transition metal carbides and nitrides, known as MXene with empirical formula Mn+1XnTx, have generated widespread attention and demonstrated impressive potential in various fields. The fabrication of 2-D novel MXene and its composites and their characterizations are applicable to vast applications in different areas such as energy storage, gas sensors, catalysis, and biomedical applications. In this review, the main focus is on the various synthesis methods, their properties, and biomedical applications. This review provides detailed illustrations of MXenes for many biomedical applications, including bioimaging, drug delivery, therapies, biosensors, tissue engineering, and antibacterial reagents. The challenges and future prospects were highlighted in a comprehensive manner, and the existing problems and potential for MXene-based biomaterials were analyzed with the goal of accelerating their use in the biomedical field.

Advances in MXene-based luminescence sensing strategies

MXenes have attracted the attention of many researchers as one of the latest two-dimensional (2D) materials over the last decade. Their great potential for biosensing has also been fully exploited after the discovery of their unique properties such as superior optical properties, excellent hydrophilicity, good thermal stability, excellent mechanical property, high electrical conductivity, biocompatibility, large surface area, and ease of surface functionalization. In the MXene-based luminescence sensing strategy, MXenes typically appear in the form of nanosheets, quantum dots and modified MXene nanocomposites, and they are utilized as different sensing platforms or as a luminescence source. In this review, we focused on the MXene-based luminescence sensing strategies, including fluorescence, electrochemiluminescence and chemiluminescence sensors and the comparison of their performance. Finally, the perspectives of the MXene-based luminescence sensors are discussed.

Recent Advances in MXene Quantum Dots: A Platform with Unique Properties for General-Purpose Functional Materials with Novel Biomedical Applications

Developing new, high-performance materials is a prerequisite for technological advancement. In comparison to bulk materials, quantum dots have a number of good advantages due to their small size, high surface area, and quantum dimensions. Quantum dots, two-dimensional materials with lateral dimensions less than 100 nm, can be generated by the quantum confinement effect. Mxene quantum dots (MQDs) retain some of their two-dimensional characteristics. They also exhibit novel physicochemical properties, including enhanced dispersibility in aqueous and nonaqueous phases, modification or doping capabilities, and photoluminescence. MQDs, due to their unique and diverse properties, have been receiving a great deal of attention as new members of the Mxene group and wide use for biotechnology, bioimaging, optoelectronics, catalysis, cancer therapy, etc. This review aims to provide an overview of the synthesis of MQDs, their optical properties, and their cancer therapy applications. MQDs exhibit remarkable photothermal and photodynamic features and can be suitable for bioimaging. In addition to obtaining bioimaging, photothermal therapy (PTT) and photodynamic therapy (PDT) effects simultaneously, MQDs have high biocompatibility in vitro and in vivo, providing evidence of their potential clinical utility. Herein, recent developments and future prospects concerning MQDs biomedical applications are discussed.

A turn-off fluorimetric -aptasensor for early detection of apoptosis inside the cells

To detect cytochrome c (Cyt c) as an important biomarker of apoptosis inside the cells, a simple, label-free, fluorometric detection method has been presented. For this purpose, an aptamer/gold nanocluster probe (Aptamer@AuNCs) was produced which could specifically bind to Cyt c leading to fluorescence quenching of AuNCs. The developed aptasensor showed two linear ranges of 1-80 μM and 100-1000 μM and a detection limit of 0.77 μM and 297.5 μM, respectively. This platform was successfully used to assay Cyt c release inside the apoptotic cells and their cell lysate. Aptamer@AuNC due to its enzyme-like properties could replace antibodies in Cyt c detection by conventional blotting techniques.

Nitrogen-doped Ti3C2 MXene quantum dots as an effective FRET ratio fluorometric probe for sensitive detection of Cu2+ and D-PA

In this work, a ratiometric fluorescence sensing platform was established to detect Cu²⁺ and D-PA (d-penicillamine) based on nitrogen-doped Ti₃C₂ MXene quantum dots (N-MODs) that was prepared via a simple hydrothermal method and exhibited strong fluorescent and photoluminescence performance as well as excellent stability. Since the oxidation reaction between o-phenylenediamine (OPD) and Cu²⁺ induced the formation of 2,3-diaminophenazine (ox-OPD) which not only can emerge an emission peak at 570 nm, but also inhibit the fluorescence intensity of N-MQDs at 450 nm, a ratiometric reverse fluorescence sensor via fluorescence resonance energy transfer (FRET) was designed to sensitively detect Cu²⁺, where N-MQDs acted as energy donor and ox-OPD as energy acceptor. More importantly, another considerably interesting phenomenon was that their catalytic oxidation reaction can be restrained in the presence of D-PA because of the coordination of Cu²⁺ with D-PA, further triggering the obvious changes in ratio fluorescent signal and color, thus a ratiometric fluorescent sensor of determining D-PA was proposed also in this work. After optimizing various conditions, the ratiometric sensing platform showed rather low detection limits for Cu²⁺ (3.0 nM) and D-PA (0.115 μM), coupled with excellent sensitivity and stability.

Roles of MXenes in biomedical applications: recent developments and prospects

....With the development of nanomedical technology, the application of various novel nanomaterials in the biomedical field has been greatly developed in recent years. MXenes, which are new inorganic nanomaterials with ultrathin atomic thickness, consist of layered transition metal carbides and nitrides or carbonitrides and have the general structural formula Mn+1XnTx (n = 1-3). Based on the unique structural features of MXenes, such as ultrathin atomic thickness and high specific surface area, and their excellent physicochemical properties, such as high photothermal conversion efficiency and antibacterial properties, MXenes have been widely applied in the biomedical field. This review systematically summarizes the application of MXene-based materials in biomedicine. The first section is a brief summary of their synthesis methods and surface modification strategies, which is followed by a focused overview and analysis of MXenes applications in biosensors, diagnosis, therapy, antibacterial agents, and implants, among other areas. We also review two popular research areas: wearable devices and immunotherapy. Finally, the difficulties and research progress in the clinical translation of MXene-based materials in biomedical applications are briefly discussed.

Towards hospital-on-chip supported by 2D MXenes-based 5th generation intelligent biosensors

Existing public health emergencies due to fatal/infectious diseases such as coronavirus disease (COVID-19) and monkeypox have raised the paradigm of 5th generation portable intelligent and multifunctional biosensors embedded on a single chip. The state-of-the-art 5th generation biosensors are concerned with integrating advanced functional materials with controllable physicochemical attributes and optimal machine processability. In this direction, 2D metal carbides and nitrides (MXenes), owing to their enhanced effective surface area, tunable physicochemical properties, and rich surface functionalities, have shown promising performances in biosensing flatlands. Moreover, their hybridization with diversified nanomaterials caters to their associated challenges for the commercialization of stability due to restacking and oxidation. MXenes and its hybrid biosensors have demonstrated intelligent and lab-on-chip prospects for determining diverse biomarkers/pathogens related to fatal and infectious diseases. Recently, on-site detection has been clubbed with solution-on-chip MXenes by interfacing biosensors with modern-age technologies, including 5G communication, internet-of-medical-things (IoMT), artificial intelligence (AI), and data clouding to progress toward hospital-on-chip (HOC) modules. This review comprehensively summarizes the state-of-the-art MXene fabrication, advancements in physicochemical properties to architect biosensors, and the progress of MXene-based lab-on-chip biosensors toward HOC solutions. Besides, it discusses sustainable aspects, practical challenges and alternative solutions associated with these modules to develop personalized and remote healthcare solutions for every individual in the world.

2D MXene-Based Biosensing: A Review

MXene emerged as decent 2D material and has been exploited for numerous applications in the last decade. The remunerations of the ideal metallic conductivity, optical absorbance, mechanical stability, higher heterogeneous electron transfer rate, and good redox capability have made MXene a potential candidate for biosensing applications. The hydrophilic nature, biocompatibility, antifouling, and anti-toxicity properties have opened avenues for MXene to perform in vitro and in vivo analysis. In this review, the concept, operating principle, detailed mechanism, and characteristic properties are comprehensively assessed and compiled along with breakthroughs in MXene fabrication and conjugation strategies for the development of unique electrochemical and optical biosensors. Further, the current challenges are summarized and suggested future aspects. This review article is believed to shed some light on the development of MXene for biosensing and will open new opportunities for the future advanced translational application of MXene bioassays.

Cytochrome c in cancer therapy and prognosis

Cytochrome c (cyt c) is an electron transporter of the mitochondrial respiratory chain. Upon permeabilization of the mitochondrial outer membrane, cyt c is released into the cytoplasm, where it triggers the intrinsic pathway of apoptosis. Cytoplasmic cyt c can further reach the bloodstream. Apoptosis inhibition is one of the hallmarks of cancer and its induction in tumors is a widely used therapeutic approach. Apoptosis inhibition and induction correlate with decreased and increased serum levels of cyt c, respectively. The quantification of cyt c in the serum is useful in the monitoring of patient response to chemotherapy, with potential prognosis value. Several highly sensitive biosensors have been developed for the quantification of cyt c levels in human serum. Moreover, the delivery of exogenous cyt c to the cytoplasm of cancer cells is an effective approach for inducing their apoptosis. Similarly, several protein-based and nanoparticle-based systems have been developed for the therapeutic delivery of cyt c to cancer cells. As such, cyt c is a human protein with promising value in cancer prognosis and therapy. In addition, its thermal stability can be extended through PEGylation and ionic liquid storage. These processes could contribute to enhancing its therapeutic exploitation in clinical facilities with limited refrigeration conditions. Here, I discuss these research lines and how their timely conjunction can advance cancer therapy and prognosis.

New Horizons for MXenes in Biosensing Applications

Over the last few decades, biosensors have made significant advances in detecting non-invasive biomarkers of disease-related body fluid substances with high sensitivity, high accuracy, low cost and ease in operation. Among various two-dimensional (2D) materials, MXenes have attracted widespread interest due to their unique surface properties, as well as mechanical, optical, electrical and biocompatible properties, and have been applied in various fields, particularly in the preparation of biosensors, which play a critical role. Here, we systematically introduce the application of MXenes in electrochemical, optical and other bioanalytical methods in recent years. Finally, we summarise and discuss problems in the field of biosensing and possible future directions of MXenes. We hope to provide an outlook on MXenes applications in biosensing and to stimulate broader interests and research in MXenes across different disciplines.

A Review on MXene Synthesis, Stability, and Photocatalytic Applications

Photocatalytic water splitting, CO₂ reduction, and pollutant degradation have emerged as promising strategies to remedy the existing environmental and energy crises. However, grafting of expensive and less abundant noble-metal cocatalysts on photocatalyst materials is a mandatory practice to achieve enhanced photocatalytic performance owing to the ability of the cocatalysts to extract electrons efficiently from the photocatalyst and enable rapid/enhanced catalytic reaction. Hence, developing highly efficient, inexpensive, and noble-metal-free cocatalysts composed of earth-abundant elements is considered as a noteworthy step toward considering photocatalysis as a more economical strategy. Recently, MXenes (two-dimensional (2D) transition-metal carbides, nitrides, and carbonitrides) have shown huge potential as alternatives for noble-metal cocatalysts. MXenes have several excellent properties, including atomically thin 2D morphology, metallic electrical conductivity, hydrophilic surface, and high specific surface area. In addition, they exhibit Gibbs free energy of intermediate H atom adsorption as close to zero and less than that of a commercial Pt-based cocatalyst, a Fermi level position above the H₂ generation potential, and an excellent ability to capture and activate CO₂ molecules. Therefore, there is a growing interest in MXene-based photocatalyst materials for various photocatalytic events. In this review, we focus on the recent advances in the synthesis of MXenes with 2D and 0D morphologies, the stability of MXenes, and MXene-based photocatalysts for H₂ evolution, CO₂ reduction, and pollutant degradation. The existing challenges and the possible future directions to enhance the photocatalytic performance of MXene-based photocatalysts are also discussed.

Magnetic Ti3C2 MXene Nanomaterials for Doxorubicin Adsorption from Aqueous Solutions: Kinetic, Isotherms, and Thermodynamic Studies

In this work, the magnetic Ti₃C₂ MXene functionalized with β-cyclodextrin was prepared and characterized using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectra, X-ray diffraction, X-ray photoelectron spectroscopy, vibrating sample magnetometry, and thermogravimetric analysis. The synthesized nanomaterial was used as an adsorbent to adsorb doxorubicin from aqueous solutions, and the experimental parameters that affected the adsorption efficiency were investigated. In addition, the adsorption characteristics including adsorption kinetics, adsorption isotherm, and thermodynamics were researched comprehensively. The adsorption kinetics of doxorubicin followed a pseudo-second-order kinetic model, which indicated that adsorption was the rate-limiting step, and the maximum adsorption capacity was 7.35 μg mg^-1 by shaking for 60 min at pH 7.0. The adsorption isotherm was well described using the Freundlich model, which implied that multilayer adsorption took place over the prepared nanomaterial for doxorubicin adsorption. The negative values of Gibbs free energy change (ΔG ⁰ < 0) demonstrated that doxorubicin adsorption was a spontaneous process. The positive values of entropy change (ΔS ⁰ > 0) implied that doxorubicin adsorption was an increasing random process. Enthalpy change values were positive (ΔH ⁰ > 0) and indicated that the adsorption of doxorubicin was endothermic. The adsorption percentage of doxorubicin remained in the range of 41.05-44.09%, and the relative standard deviation (RSD) based on the adsorption percentage through five replicate adsorption and desorption processes was 2.8%. These results indicated that the magnetic Ti₃C₂ MXene nanomaterials can be an effective adsorbent to adsorb DOX from aqueous solutions.

Quantum Dots Compete at the Acme of MXene Family for the Optimal Catalysis

It is well known that two-dimensional (2D) MXene-derived quantum dots (MQDs) inherit the excellent physicochemical properties of the parental MXenes, as a Chinese proverb says, "Indigo blue is extracted from the indigo plant, but is bluer than the plant it comes from." Therefore, 0D QDs harvest larger surface-to-volume ratio, outstanding optical properties, and vigorous quantum confinement effect. Currently, MQDs trigger enormous research enthusiasm as an emerging star of functional materials applied to physics, chemistry, biology, energy conversion, and storage. Since the surface properties of small-sized MQDs include the type of surface functional groups, the functionalized surface directly determines their performance. As the Nobel Laureate Wolfgang Pauli says, "God made the bulk, but the surface was invented by the devil," and it is just on the basis of the abundant surface functional groups, there is lots of space to be thereof excavated from MQDs. We are witnessing such excellence and even more promising to be expected. Nowadays, MQDs have been widely applied to catalysis, whereas the related reviews are rarely reported. Herein, we provide a state-of-the-art overview of MQDs in catalysis over the past five years, ranging from the origin and development of MQDs, synthetic routes of MQDs, and functionalized MQDs to advanced characterization techniques. To explore the diversity of catalytic application and perspectives of MQDs, our review will stimulate more efforts toward the synthesis of optimal MQDs and thereof designing high-performance MQDs-based catalysts.

Fabrication of a label-free electrochemical aptasensor to detect cytochrome c in the early stage of cell apoptosis

A label-free direct electrochemical aptasensor is presented for the identification of cytochrome c (Cyt c) at the nM concentration level. Carbon nanofibers (CNF), as a highly conductive material, were used to modify a glassy carbon electrode (GCE) and thus increase its conductivity. Moreover, to enhance the immobilization of aptamers (Apt) on the electrode surface, graphene oxide functionalized with aspartic acid (GOAsp) was added to the surface. Aspartic acid with countless carboxyl groups (-COOH) on its surface caused more aptamers to be immobilized on the electrode surface. Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and differential pulse voltammetry (DPV) were used to monitor the step-by-step fabrication of the label-free direct electrochemical aptasensor. The label-free quantification of Cyt c was also done by the direct electron transfer between the Fe(III)/Fe(II)-heme redox-active sites which were selectively bound to the aptamers on the GCE and the surface of the electrode. Under optimum conditions, the peak currents of differential pulse voltammograms at 0.26 V (vs. Ag/AgCl) were used for calibration. The proposed aptasensor performs in a wide dynamic range from 10 nM to 100 µM with a low detection limit of 0.74 nM for cytochrome c. It also has high selectivity as well as acceptable stability. These advantages make the biosensor capable of detecting early-stage apoptotic cells that contribute to early cancer diagnosis.

Smart MXene Quantum Dot-Based Nanosystems for Biomedical Applications

MXene quantum dots (QDs), with their unique structural, optical, magnetic, and electronic characteristics, are promising contenders for various pharmaceutical and biomedical appliances including biological sensing/imaging, cancer diagnosis/therapy, regenerative medicine, tissue engineering, delivery of drugs/genes, and analytical biochemistry. Although functionalized MXene QDs have demonstrated high biocompatibility, superb optical properties, and stability, several challenging issues pertaining to their long-term toxicity, histopathology, biodistribution, biodegradability, and photoluminescence properties are still awaiting systematic study (especially the move towards the practical and clinical phases from the pre-clinical/lab-scale discoveries). The up-scalable and optimized synthesis methods need to be developed not only for the MXene QD-based nanosystems but also for other smart platforms and hybrid nanocomposites encompassing MXenes with vast clinical and biomedical potentials. Enhancing the functionalization strategies, improvement of synthesis methods, cytotoxicity/biosafety evaluations, enriching the biomedical applications, and exploring additional MXene QDs are crucial aspects for developing the smart MXene QD-based nanosystems with improved features. Herein, recent developments concerning the biomedical applications of MXene QDs are underscored with emphasis on current trends and future prospects.

Recent Trends in Synthesis and Applications of porous MXene Assemblies: A Topical Review

MXene possesses high conductivity, excellent hydrophilicity, rich surface chemistry, hence holds great potential in various applications. However, MXene materials have low surface area utilization due to the agglomeration of ultrathin nanosheets. Assembling 2D MXene nanosheets into 3D multi-level architectures is an effective way to circumvent this issue. Incorporation of MXene with other nanomaterials during the assembly process could rationally tune and tailor the specific surface area, porosity and surface chemistry of the MXene assemblies. The complementary and synergistic effect between MXene and nanomaterials could expand their advantages and make up for their disadvantages, thus boost the performance of 3D porous MXene composites. Herein, we summarize the recent progress in fabrication of porous MXene architectures from 2D to 3D, and also discuss the potential applications of MXene nanostructures in energy harvesting systems, sensing, electromagnetic interference shielding, water purification and photocatalysis.

Fluorine-free synthesis of Ti3C2 MQDs for smartphone-based fluorescent and colorimetric determination of acetylcholinesterase and organophosphorus pesticides

Ti₃C₂ MQDs were synthesized using an effective fluorine-free method with excitation/emission maxima at 390/490 nm and a fluorescence quantum yield of 11.78%. In contrast to the traditional, hazardous, and time-consuming process of HF pretreatment, our fluorine-free method is safe and simple. Acetylcholinesterase (AChE) could catalyze the hydrolysis of acetylthiocholine (ATCh) to produce thiocholine which was further reacted with Ehrman's reagent and decomposed to form a yellow product 2-nitro-5-thiobenate anion (TNB). Due to the obvious overlap between the excitation spectrum of Ti₃C₂ MQDs and the absorption spectrum of TNB, AChE catalyzed the hydrolysis of substrate DTNB/ATCh to form TNB, which can effectively quench the fluorescence of Ti₃C₂ MQDs through the inner filter effect (IFE). However, the presence of organophosphorus (OPs) inhibited the activity of AChE, leading to a less expressed IFE and increasing recovery of fluorescence. This was used for the quantification of OPs with a detection limit of 0.20 μg·L^-1. Moreover, with the constant increase of AChE activity, the color of the reaction system changed visibly from colorless to yellow, and then from yellow to colorless with further continuous addition of OPs. A colorimetric detection with a paper-based sensor of AChE activity and OP concentration was also fabricated by analyzing changes in RGB value using a smartphone APP. In this work, we proposed an effective fluorescence/colorimetric two-mode detection method, which opened a new horizon to detect other targets.

Electrochemical and optical biosensors based on multifunctional MXene nanoplatforms: Progress and prospects

Two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides (MXene) have emerged as a rising family of atomic layered nanomaterials which undergoes intensive investigations in interdisciplinary applications. The large surface-to-volume ratio, excellent mechanical strength, desirable biocompatibility, along with tunable electronic and optical properties, render 2D MXenes exceptional attractive as versatile nanoplatforms for biosensing. Herein, advanced progress and novel paradigms of MXene-based biosensors are reviewed, focusing on the combination of MXenes with various detection techniques that promotes target recognition and signal transducing. Regarding the nature of transducing signals, MXene-based biosensors are categorized into two groups where MXenes serve as electrical platforms or optical platforms, respectively. The merits of MXenes are critically compared with other 2D materials to illustrate the distinctive advantages of MXenes in biosensing, while challenges such as environmental vulnerability was discussed to guide the sensor design. Facing with the rapid development of wearable electronics and internet of medical things, as well as escalating demanding in precision medicine, perspectives are provided to elucidate the potential of MXenes in propelling advances in these trending biomedical applications.

Nanodots Derived from Layered Materials: Synthesis and Applications

Layered 2D materials, such as graphene, transition metal dichalcogenides, transition metal oxides, black phosphorus, graphitic carbon nitride, hexagonal boron nitride, and MXenes, have attracted intensive attention over the past decades owing to their unique properties and wide applications in electronics, catalysis, energy storage, biomedicine, etc. Further reducing the lateral size of layered 2D materials down to less than 10 nm allows for preparing a new class of nanostructures, namely, nanodots derived from layered materials. Nanodots derived from layered materials not only can exhibit the intriguing properties of nanodots due to the size confinement originating from the ultrasmall size, but also can inherit some unique properties of ultrathin layered 2D materials, making them promising candidates in a wide range of applications, especially in biomedicine and catalysis. Here, a comprehensive summary on the materials categories, advantages, synthesis methods, and potential applications of these nanodots derived from layered materials is provided. Finally, personal insights about the challenges and future directions in this promising research field are also given.

Sensing with MXenes: Progress and Prospects

Various fields of study consider MXene a revolutionary 2D material. Particularly in the field of sensors, the metal-like high electrical conductivity and large surface area of MXenes are desirable characteristics as an alternative sensor material that can transcend the boundaries of existing sensor technology. This critical review provides a comprehensive overview of recent advances in MXene-based sensor technology and a roadmap for commercializing MXene-based sensors. The existing sensors are systematically categorized as chemical, biological, and physical sensors. Each category is then classified into various subcategories depending on the electrical, electrochemical, structural, or optical sensing mechanism, which are the four fundamental working mechanisms of sensors. Representative structural and electrical approaches for boosting the performance of each category are presented. Finally, factors that hinder commercializing MXene-based sensors are discussed, and several breakthroughs in realizing commercially available MXene-based sensors are suggested. This review provides broad insights pertaining to previous and existing MXene-based sensor technology and perspectives on the future generation of low-cost, high-performance, and multimodal sensors for soft-electronics applications.

Acoustomicrofluidic Synthesis of Pristine Ultrathin Ti3C2Tz MXene Nanosheets and Quantum Dots

The conversion of layered transition metal carbides and/or nitrides (MXenes) into zero-dimensional structures with thicknesses and lateral dimensions of a few nanometers allows these recently discovered materials with exceptional electronic properties to exploit the additional benefits of quantum confinement, edge effects, and large surface area. Conventional methods for the conversion of MXene nanosheets and quantum dots, however, involve extreme conditions such as high temperatures and/or harsh chemicals that, among other disadvantages, lead to significant degradation of the material as a consequence of their oxidation. Herein, we show that the large surface acceleration-on the order of 10 million g's-produced by high-frequency (10 MHz) nanometer-order electromechanical vibrations on a chip-scale piezoelectric substrate is capable of efficiently nebulizing, and consequently dimensionally reducing, a suspension of multilayer Ti₃C₂T_z (MXene) into predominantly monolayer nanosheets and quantum dots while, importantly, preserving the material from any appreciable oxidation. As an example application, we show that the high-purity MXene quantum dots produced using this room-temperature chemical-free synthesis method exhibit superior performance as electrode materials for electrochemical sensing of hydrogen peroxide compared to the highly oxidized samples obtained through conventional hydrothermal synthesis. The ability to detect concentrations as low as 5 nM is a 10-fold improvement to the best reported performance of Ti₃C₂T_z MXene electrochemical sensors to date.

Fascinating MXene nanomaterials: emerging opportunities in the biomedical field

In recent years, there has been rapid progress in MXene research due to its distinctive two-dimensional structure and outstanding properties. Especially in biomedical applications, MXenes have attracted widespread favor with numerous studies on biosafety, bioimaging, therapy, and biosensing, although their development is still in the experimental stage. A comprehensive understanding of the current status of MXenes in biomedicine will promote their use in clinical applications. Here, we review advances in MXene research. First, we introduce the methods of synthesis, surface modification and functionalization of MXenes. Then, we summarize the biosafety and biocompatibility, paving the way for specific biomedical applications. On this basis, MXene nanostructures are described with respect to their use in antibacterial, bioimaging, cancer therapy, tissue regeneration and biosensor applications. Finally, we discuss MXene as a promising candidate material for further applications in biomedicine.

Preparation Strategies and Applications of MXene-Polymer Composites: A Review

As a new member of the 2D material family, MXene integrates high metallic conductivity and hydrophilic property simultaneously. It shows tremendous potential in fields of energy storage, sensing, electromagnetic shielding, and so forth. Due to the abundant surface functional groups, the physical and chemical properties of MXene can be tuned by the formation of MXene-polymer composites. The introduction of polymers can expand the interlayer spacing, reduce the distance of ion/electron transport, improve the surface hydrophilicity, and thus guide the assembly of MXene-polymer structures. Herein, the preparation strategies of MXene-polymer composites including physical mixing, surface modification, such as anchoring through TiN and Ti-O-C bonds, bonding through esterification, grafting functional groups through TiOSi/TiOP bonds, photograft reaction, as well as in situ polymerization are highlighted. In addition, the possible mechanisms for each strategy are explained. Furthermore, the applications of MXene-polymer composites obtained by different preparation strategies are summarized. Finally, perspectives and challenges are presented for the designs of MXene-polymer composites.

Integration of fluorescent polydopamine nanoparticles on protamine for simple and sensitive trypsin assay

As an important protease, trypsin (TRY) has been identified as a key indicator of various diseases. A simple and sensitive strategy for TRY detection by using an environment-friendly biosafe probe is significant. Herein, we introduced negatively charged fluorescent polydopamine nanoparticles (PDNPs) with 4.8 nm diameter obtained through a controllable method as an effective probe for TRY. PDNPs exhibited excellent fluorescence property but integrated with protamine (Pro) to form an aggregation-caused quenching system via a static quenching mechanism. The quenching mechanism of Pro to PDNPs revealed the significant effect of the surface charge, functional groups, and appropriate size of PDNPs on quenching process. Given the specific hydrolysis of Pro by TRY, PDNPs were released from the quenching integration of PDNPs and Pro (PDNPs-Pro) and recovered their fluorescence. Thus, a fluorescence sensor for TRY with a linear range of 0.01 and 0.1 μg/mL and a detection limit of 6.7 ng/mL was developed without the disturbing from other proteases. Compared with other TRY assays, the biosensor based on PDNPs-Pro has the advantages of simple operation, environmental friendliness, and high sensitivity. This specific controlled-synthesis PDNPs would open up a new window for the extended application of fluorescent nanomaterials in biomedicine based on fluorescence changes induced by biological interaction.

Peptide modified manganese-doped iron oxide nanoparticles as a sensitive fluorescence nanosensor for non-invasive detection of trypsin activity in vitro and in vivo

Herein, a fluorescence turn-on nanosensor (MnIO@pep-FITC) has been proposed for detecting trypsin activity in vitro and in vivo through covalently immobilizing an FITC modified peptide substrate of trypsin (pep-FITC) on manganese-doped iron oxide nanoparticle (MnIO NP) surfaces via a polyethylene glycol (PEG) crosslinker. The conjugation of pep-FITC with MnIO NPs results in the quenching of FITC fluorescence. After trypsin cleavage, the FITC moiety is released from the MnIO NP surface, leading to a remarkable recovery of FITC fluorescence signal. Under the optimum experimental conditions, the recovery ratio of FITC fluorescence intensity is linearly dependent on the trypsin concentration in the range of 2 to 100 ng mL-1 in buffer and intracellular trypsin in the lysate of 5 × 102 to 1 × 104 HCT116 cells per mL, respectively. The detection limit of trypsin is 0.6 ng mL-1 in buffer or 359 cells per mL HCT116 cell lysate. The MnIO@pep-FITC is successfully employed to noninvasively monitor trypsin activity in the ultrasmall (ca. 4.9 mm3 in volume) BALB/c nude mouse-bearing HCT116 tumor by in vivo fluorescence imaging with external magnetic field assistance, demonstrating that it has excellent practicability.

Progress and Insights in the Application of MXenes as New 2D Nano-Materials Suitable for Biosensors and Biofuel Cell Design

Recent progress in the application of new 2D-materials-MXenes-in the design of biosensors, biofuel cells and bioelectronics is overviewed and some advances in this area are foreseen. Recent developments in the formation of a relatively new class of 2D metallically conducting MXenes opens a new avenue for the design of conducting composites with metallic conductivity and advanced sensing properties. Advantageous properties of MXenes suitable for biosensing applications are discussed. Frontiers and new insights in the area of application of MXenes in sensorics, biosensorics and in the design of some wearable electronic devices are outlined. Some disadvantages and challenges in the application of MXene based structures are critically discussed.

Recent Advances in MXene Nanocomposite-Based Biosensors

The development of advanced biosensors with high sensitivity and selectivity is one of the most demanded concerns in the field of biosensors. To meet this requirement, up until now, numerous nanomaterials have been introduced to develop biosensors for achieving high sensitivity and selectivity. Among the latest nanomaterials attracting attention, MXene is one of the best materials for the development of biosensors because of its various superior properties. MXenes are two-dimensional inorganic compounds with few atomic layers that possess excellent characteristics including high conductivity and superior fluorescent, optical, and plasmonic properties. In this review, advanced biosensors developed on the basis of the MXene nanocomposite are discussed with the selective overview of recently reported studies. For this, introduction of the MXene including the definition, synthesis methods, and its properties are discussed. Next, MXene-based electrochemical biosensors and MXene-based fluorescent/optical biosensors are provided, which are developed on the basis of the exceptional properties of the MXene nanocomposite. This review will suggest the direction for use of the Mxene nanocomposite to develop advanced biosensors with high sensitivity and selectivity.

Optical assay of trypsin using a one-dimensional plasmonic grating of gelatin-modified poly(methacrylic acid)

The geometry of resonant absorbers (RA) is varied by tryptic digestion to design a probe platform. The process includes fabrication of a line array of poly(methacrylic acid) (PMAA) brush as an RA, tailed by the immobilization of gelatin. The gelatin-modified PMAA RA is a kind of one-dimensional plasmonic grating, possessing an optical feature with a characteristic absorption peak. The growth of gelatin on PMAA RA resulted in a blue shift of the absorption peak from 465 to 263 nm. Trypsin catalyzes the hydrolysis of peptide bonds, breaking down gelatin into smaller peptides causing the change in geometry of RA. The gelatin of RA was digested in a wide linear range of activity of trypsin from 34 to 1088 U mL^-1 resulting in a red shift of the absorption peak of RA from 263 to 474 nm within 10 min. The limit of detection achieved is 11 U mL^-1 with ca. 1.9% standard deviation and 101.4% recovery of spiked serum samples. The chemical selectivity of the trypsin assay is evidenced by motoring the changes in a shift of the absorption peak of gelatin-modified PMAA RA using chymotrypsin and horseradish peroxidase. Graphical abstract Schematic representation of synthesis route of 1D gelatin grating on silicon surface for trypsin probing.

A simple fluorescence assay for trypsin through a protamine-induced carbon quantum dot-quenching aggregation platform

The development of a simple detection strategy for trypsin (Try) is urgent, and is ascribed to the diagnostic value of Try in several diseases. Herein, a facile but effective fluorescence strategy for Try was developed based on the protamine (Pro)-induced aggregation of carbon quantum dots (CQDs). The fluorescence of negatively charged CQDs was quenched with Pro due to the assembly of CQDs and Pro (CQDs/Pro) through electrostatic interaction. However, the highly positively charged Pro, which is rich in basic arginine residues, was preferred to be hydrolyzed by Try. Try can induce the deaggregation of CQDs/Pro, thereby enabling the release of CQDs to restore the fluorescence intensity. Thus, the use of CQDs/Pro as a testing platform will be employed as a “turn-on” method for Try. In addition, the fluorescence-resuming response was proportional to Try, ranging from 25 ng mL⁻¹ to 500 ng mL⁻¹ with a limit of detection (LOD) of 8.08 ng mL⁻¹. This “turn-on” fluorescence assay for Try was label-free, convenient, and relatively free of interference from coexisting substances. Actual applications for Try monitoring and trypsin inhibitor screening also illustrated the considerable prospect of CQDs in the clinical field, combined with the superiority of the simple mixing operation.

In this work, a simple melting method was developed for carbon quantum dot fabrication to integrate with protamine as an effective signal-on fluorescence strategy for trypsin detection.