A system composed of vanadium(IV) disulfide quantum dots and molybdenum(IV) disulfide nanosheets for use in an aptamer-based fluorometric tetracycline assay

Designing a Stable g-C3N4/BiVO4-Based Photoelectrochemical Aptasensor for Tetracycline Determination

The excessive consumption of tetracycline (TC) could bring a series of unpredictable health and ecological risks. Therefore, it is crucial to develop convenient and effective detection technology for TC. Herein, a "signal on" photoelectrochemical (PEC) aptasensor was constructed for the stable detection of TC. Specifically, the g-C3N4/BiVO4 were used to promote the migration of photo-generated charges to an enhanced photocurrent response. TC aptamer probes were stably fixed on the g-C3N4/BiVO4/FTO electrode as a recognition element via covalent bonding interaction. In the presence of TC, the aptamer probes could directly recognize and capture TC. Subsequently, TC was oxidized by the photogenerated holes of g-C3N4/BiVO4, causing an enhanced photocurrent. The "signal on" PEC aptasensor displayed a distinguished detection performance toward TC in terms of a wide linear range from 0.1 to 500 nM with a low detection limit of 0.06 nM, and possessed high stability, great selectivity, and good application prospects.

A Selective Fluorescent Nanoprobe Based on Graphene Quantum Dots and Hg2+ for the Determination of Tetracycline in Biological Samples

A simple, sensitive, and selective fluorometric method based on graphene quantum dots and Hg²⁺ is presented for the determination of tetracycline. The fluorescence emission of graphene quantum dots at 463 nm decreased in the presence of Hg²⁺ ions due to its electrostatic interaction with the negatively charged surface of quantum dots at pH = 8.0. The addition of tetracycline to this system resulted in the retrieval of the fluorescence emission of the graphene quantum dots proportional to the tetracycline concentration. This is because of the interaction between tetracycline and Hg²⁺ that results in the release of the quantum dots' surface. Under the optimized conditions, the calibration curve indicated good linearity in the range of 2.0-44.0 nmol L^-1 with a detection limit of 0.52 nmol L^-1 for tetracycline. The designed nanoprobe was capable of the determination of tetracycline in serum and urine samples.

Signal enhancing strategies in aptasensors for the detection of small molecular contaminants by nanomaterials and nucleic acid amplification

Small molecular contaminants (such as mycotoxins, antibiotics, pesticide residues, etc.) in food and environment have given rise to many biological and ecological toxicities, which has attracted worldwide attention in recent years. Meanwhile, due to the advantages of aptamers such as high specificity and stability, easy synthesis and modification, as well as low cost and immunogenicity, various aptasensors for the detection of small molecular contaminants have been flourishing. An aptasensor as a whole is composed of an aptamer-based target recognizer and a signal transducer, which are fields of concentrated research. In the practical detection applications, in order to achieve the quantitative detection of small molecular contaminants at low abundance in real samples, a large number of signal enhancing strategies have been utilized in the development of aptasensors. Recent years is a vintage period for efficient signal enhancing strategies of aptasensors by the aid of nanomaterials and nucleic acid amplification that are applied in the elements for target recognition and signal conversion. Therefore, this paper meticulously reviews the signal enhancing strategies based on nanomaterials (including the (quasi-)zero-dimensional, one-dimensional, two-dimensional and three-dimensional nanomaterials) and nucleic acid amplification (including enzyme-assisted nucleic acid amplification and enzyme-free nucleic acid amplification). Furthermore, the challenges and future trends of the abovementioned signal enhancing strategies for application are also discussed in order to inspire the practitioners in the research and development of aptasensors for small molecular contaminants.

Nitrogen, boron-doped Ti3C2 MXene quantum dot-based ratiometric fluorescence sensing platform for point-of-care testing of tetracycline using an enhanced antenna effect by Eu3

The Ti₃C₂ MXene quantum dots (Ti₃C₂ MQDs) derived from Ti₃C₂ MXene have received much attention because of their remarkable advantages in biosensing. Nevertheless, the functionalization of Ti₃C₂ MQDs to improve their properties is just in its infant stage. Herein, we firstly synthesized nitrogen and boron co-doped Ti₃C₂ MQDs (N, B-Ti₃C₂ MQDs) with good water solubility, strong stability, and high optical characteristics. The N, B-Ti₃C₂ MQDs exhibit excitation wavelength-dependent blue photoluminescence with optimal excitation/emission peaks at 335/439 nm. Nowadays, the development of fast and real-time detection of tetracycline (TC) in animal derived food is very essential. In this work, a novel point-of-care testing (POCT) platform was established based on ratiometric fluorescence method using N, B-Ti₃C₂ MQDs coupled with Eu³⁺. Upon addition of TC in the Eu³⁺/N, B-MQDs system, blue fluorescence emission of N, B-Ti₃C₂ MQDs was quenched and red fluorescence emission of Eu³⁺ was enhanced gradually, which was ascribed to the synergistic inner filter effect and antenna effect. Moreover, we prepared test papers with N, B-Ti₃C₂ MQDs and Eu³⁺ for TC detection based on the change of fluorescence color, which could be recognized by color recognizer app installed in the smartphone. Therefore, great promise for POCT of TC is given with the merits of simplicity and visible detection possibility. The proposed method demonstrated a low detection limit of 20 nM. Application of the platform for TC quantification in milk samples opened a novel means for the potential use of N, B-Ti₃C₂ MQDs in food safety.

Electrochemiluminescence biosensor based on molybdenum disulfide-graphene quantum dots nanocomposites and DNA walker signal amplification for DNA detection

Based on the prominent electrochemiluminescence (ECL) performances of molybdenum disulfide-graphene quantum dots (MoS2-GQDs) nanocomposite and combined with enzyme-assisted recycling DNA walker signal amplification, an "on-off" switch ECL biosensor was proposed for sensitive assay of specific DNA sequences. Noticeably, MoS2 with two-dimensional nanosheet structure increased the loading capacity of GQDs to support abundant hairpin DNA (H). The composites of MoS2 and GQDs facilitated the charge transfer in ECL process, which significantly improved the ECL signal to achieve an "on" state. Then, the DNA walker cyclic amplification was performed by adding the target DNA and exonuclease III (Exo III). Finally, the DNA2-Fc-DNA1 was introduced into the system as ECL signal quencher, turning the ECL signal into an "off" state. The sensitive assay of ultra-low concentration specific DNA sequences was realized according to the variation of ECL signal strength before and after the existence of target DNA. The proposed ECL biosensor showed a good linear relationship ranging from 1 nM to 100 aM with a detection limit of 25.1 aM, providing a powerful strategy for biomedical research and clinical analysis.

Advances and perspectives of aptasensors for the detection of tetracyclines: A class of model compounds of food analysis

The residual tetracyclines in food are frequently applied as the model compounds to develop aptasensors. Until now, more than 100 advanced aptasensors towards tetracyclines have been developed and published in English. This review summarizes and discusses comprehensively these advanced aptasensors, in terms of the principle designs, applied frontier transducers/materials, working performance, and advantages/disadvantages. The aptasensors are classified according to the inherent transduction techniques, i.e., optics, optics-electricity, optics-mass, and electricity-mass. Moreover, the present challenges such as the limited specificity and limited affinity of the aptamers, the future prospects and trends such as further combination with other advanced materials and technologies, and the urgent need of expanding the practical application were discussed and prospected. We hope this review can serve as a powerful tool for both tracing the development progresses of aptasensors and providing adequate references for further development of aptasensing methods for food-related analytes.

Onsite/on-field analysis of pesticide and veterinary drug residues by a state-of-art technology: A review

Pesticides and veterinary drugs are generally employed to control pests and insects in crop and livestock farming. However, remaining residues are considered potentially hazardous to human health and the environment. Therefore, regular monitoring is required for assessing and legislation of pesticides and veterinary drugs. Various approaches to determining residues in various agricultural and animal food products have been reported. Most analytical methods involve sample extraction, purification (cleanup), and detection. Traditional sample preparation is time-consuming labor-intensive, expensive, and requires a large amount of toxic organic solvent, along with high probability for the decomposition of a compound before the analysis. Thus, modern sample preparation techniques, such as the quick, easy, cheap, effective, rugged, and safe method, have been widely accepted in the scientific community for its versatile application; however, it still requires a laboratory setup for the extraction and purification processes, which also involves the utilization of a toxic solvent. Therefore, it is crucial to elucidate recent technologies that are simple, portable, green, quick, and cost-effective for onsite and infield residue detections. Several technologies, such as surface-enhanced Raman spectroscopy, quantum dots, biosensing, and miniaturized gas chromatography, are now available. Further, several onsite techniques, such as ion mobility-mass spectrometry, are now being upgraded; some of them, although unable to analyze field sample directly, can analyze a large number of compounds within very short time (such as time-of-flight and Orbitrap mass spectrometry). Thus, to stay updated with scientific advances and analyze organic contaminants effectively and safely, it is necessary to study all of the state-of-art technology.

Effective and Efficient Pretreatment of Polyimide Substrates by Capacitively Coupled Plasma for Coating the Composites of Tetracycline-Imprinted Polymers and Quantum Dots: Comparison with Chemical Pretreatment

Composites of tetracycline (Tc)-imprinted polymethacrylates and quantum dots have been coated on chemically pretreated polyimide substrates (PIs) as fluorescent sensors. In this study, PIs were pretreated by capacitively coupled plasma (CCP) before coating the same composites on them. For the first time, to fabricate sensors by plasma modification of PIs, the CCP conditions, including plasma gas, flow rate, radio frequency generation power, and duration time, the fabrication details, including coating, baking, and stripping steps, and the sample loading process were optimized to perform a linear decrease in fluorescent intensity with Tc concentrations in the range of 5.0-3000 μM (R2 = 0.9995) with a limit of detection of 0.2 μM (S/N = 3, relative standard deviation (RSD) = 2.2%). The selectivity of the stripped PIs was evaluated by the imprinting factors (IFs) for Tc (IF = 7.2), other Tc analogues (IF = 3.4-5.3), and steroids (IF ≈ 1) and by the recoveries of 5.0 μM Tc from bovine serum albumin at 300 μg∙mL-1 (98%, RSD = 3.2%), fetal bovine serum at 1.5 ppt (98%, RSD = 2.8%), and liquid milk (94.5%, RSD = 5.3%). The superiority of the present plasma-treated-based sensor over the previous chemically-treated one in fabrication efficiency and detection effectiveness was clear.

Portable ratiometric probe based on the use of europium(III) coordination polymers doped with carbon dots for visual fluorometric determination of oxytetracycline

A novel ratiometric fluorescent probe for the determination of oxytetracycline (OTC) was developed. The method is based on the use of adenosine monophosphate/Eu(III) nanoscale coordination polymers doped with carbon dots (CDs) (CD@AMP/Eu NCPs). These were fabricated by self-assembly of Eu³⁺ and AMP on the surface of CDs containing large amounts of hydroxyl and carbonyl groups. Under the excitation at 310 nm wavelength, the doped NCPs display strong pink emission of Eu³⁺ at 615 nm and blue emission of the CDs at 430 nm on exposure to OTC. The ratio of fluorescence intensity (F₆₁₅/F₄₃₀) of such NCPs displays excellent linear relationship with OTC concentration ranging from 0.2 to 60 μM and the limit of detection (LOD) is 25 nM (3σ). The doped NCPs were evenly immobilized on common filter paper to prepare a visual ratiometric probe for the determination of OTC. Assisted by a digital camera with an APP color detector, the paper-based test strip was applied for the quantitative determination of OTC with a LOD of 0.5 μM and a wide linear scope of 1-100 μM. The method was applied to the determination of OTC in milk samples. Graphical abstractSchematic representation of the principle for oxytetracycline (OTC) determination using carbon dots (CD)@adenosine monophosphate (AMP)/Europium (Eu³⁺) paper-based ratiometic probe.