A "half" core-shell magnetic nanohybrid composed of zeolitic imidazolate framework and graphitic carbon nitride for magnetic solid-phase extraction of sulfonylurea herbicides from water samples followed by LC-MS/MS detection

Quality control of pollen products in the market by quantitative analysis of total amino acids with liquid chromatography

A rapid high-performance liquid chromatography (HPLC) protocol for the determination of amino acids with 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC) derivatization was successfully developed for assessing amino acid levels in six species of representative commercial bee pollen. Based on a poroshell column, a favorable chromatographic separation of seventeen amino acids was achieved in approximately 10 min with satisfactory resolution. The LOD and LOQ of this method were less than 0.034 μg/mL and 0.232 μg/mL, and the intra- and inter-day RSDs ranged between 0.86-5.28 % and 3.21-6.50 %, respectively. The matrix effect (ME) ranged from -8 to 3, implying that the matrix effect was not significant. Under the optimum conditions, the established method was adopted to determine amino acids in six types of bee pollens. The results showed that the total amino acid content ranged from 151.94 mg/g (Rosa rugosa) to 214.52 mg/g (Leonurus artemisia) in the six bee pollen species. Notably, proline (Pro), valine (Val), leucine (Leu), and phenylalanine (Phe) were abundant in the majority of samples. To identify the suspicious samples, principal component analysis (PCA) was performed, and each type of bee pollen was differentiated. Results showed that, in the market, the qualification rate of RR was 100 %, but that of NN was merely 62.5 %, revealing that a few of them were counterfeit. This method offers advantages such as high speed, low cost, and outstanding performance.

Facile and selective recognition of sulfonylurea pesticides based on the multienzyme-like activities enhancement of nanozymes combining sensor array

Traditional identification methods based on cholinesterase inhibition are limited to recognizing organic phosphorus and carbamate esters, and their response to sulfonylurea pesticides is weak. Residual sulfonylurea pesticides can pose a threat to human health. So, it is very important to develop an effective, rapid and portable method for sulfonylurea pesticides detection. Herein, we first found that sulfonylurea pesticides have activity-enhancing effects on copper-based nanozymes, and then combined them with the array technology to construct a six-channel sensing array method for selectively identifying sulfonylurea pesticides and detecting total concentration of sulfonylurea pesticides (the limit of detection was 0.03 µg/mL). This method has good selectivity towards sulfonylurea pesticides. In addition, a smartphone-based colorimetric paper sensor analysis method was developed to achieve the on-site detection of the total concentration of sulfonylurea pesticides. And this array can also be used for individual differentiation (1-100 µg/mL). Our work not only investigates the specific responses of copper-based nanozymes to sulfonylurea pesticides, but also develops a simple method that contributes to directly detect sulfonylurea pesticides at the source of pollution, providing insights for further research on sulfonylurea pesticides detection and filling the gap in pesticide residue studies.

Magnetic amino-rich hyper-crosslinked polymers for fat-rich foodstuffs pretreatment in nontargeted analysis of chemical hazards

Nontargeted analysis for chemical hazards is highly desirable in controlling food safety to ensure human health. As the dominating interference in fat-rich foodstuffs, lipids removal is a great challenge in sample pretreatment. Herein, diverse lipids from both animal and vegetable oils are effectively removed and 565 chemical hazards with various physicochemical properties are used for method validation. These benefits are from the designed magnetic amino-rich hyper-crosslinked core-shell polymeric composites (Fe₃O₄@poly(MAAM-co-EGDMA)) and the application of an auto extraction system. Among them, the amino groups are the key factors for lipid removal. Theoretical calculations, isothermal titration calorimetry (ITC), and functional monomer replacement demonstrated that the mechanisms to universally capture free fatty acids (FFAs) and triglycerides (TGs) are electrostatic interaction and supplemented by hydrogen bonding. Overall, this work highlights the great application potentials of polymeric adsorbents as sample pretreatment materials for nontargeted analysis in food safety.

Fe3O4/ZIFs-based magnetic solid-phase extraction for the effective extraction of two precursors with diverse structures in aflatoxin B1 biosynthetic pathway

The aflatoxin B₁ (AFB₁) early warning technique based on precursors is an effective strategy for the prevention of AFB₁ contamination risk. The determination of precursors is imperative to ensure the efficiency of the early warning technique. Herein, a controllable magnetic adsorbent Fe₃O₄/ZIFs was first introduced for the effective extraction and determination of averantin (AVN) and sterigmatocystin (ST) precursors in cereal by combining magnetic solid-phase extraction (MSPE) and high-performance liquid chromatography (HPLC). Benefiting from the abundant adsorption sites and multifunctional groups matching the analytes, Fe₃O₄/ZIFs effectively and simultaneously extracted AVN and ST with great differences in polarity and structure via multiple interactions. AVN was extracted by Fe₃O₄/ZIFs mainly through π-π and hydrophobic interactions, while ST was extracted predominantly by electrostatic interactions and surface complexation. The limits of detection were 0.08 μg kg^-1 (AVN) and 0.36 μg kg^-1 (ST). The developed method exhibited satisfactory spiked recoveries (79.1%-105.4%) in the determination of AVN and ST in rice. This work provides a novel analytical strategy for further studying AFB₁ early warning technique and the formation and transformation of aflatoxins.

A Review on Recent Innovations of Pretreatment and Analysis Methods for Sulfonylurea Herbicides

Sulfonylurea herbicides (SUHs) are widely used in agriculture because of their low dosage, low cost, and high selectivity. However, due to improper use and lack of effective management, their residues pose a threat to the human health through environment and food pollution. Therefore, there is a need for simple, quick, economical, and effective methods to analyze SUHs in plant-derived foods, crops, and environmental samples. The present article presents a comprehensive review of the pretreatment and analytical technologies used for SUHs in various sample matrices, focusing on the developments since 2010. The main pretreatment methods include liquid-liquid extraction, solid-phase extraction, QuEChERS, and different microextraction methods, whereas analytical methods mainly include liquid chromatography coupled with different detectors, capillary electrophoresis, among others. In addition, the present study also compared the advantages and disadvantages of the methods and the future development is prospected.

An alternative analytical strategy based on QuEChERS and dissolvable layered double hydroxide dispersive micro-solid phase extraction for trace determination of sulfonylurea herbicides in wolfberry by LC-MS/MS

In this work, a combination of QuEChERS and dispersive micro-solid phase extraction (D-μ-SPE) based on dissolvable layered double hydroxide (LDH) has been established for preconcentration and enrichment of sulfonylurea herbicides (SUHs) in wolfberry samples. The QuEChERS was used for extraction and purification of SUHs, followed by D-μ-SPE for further enrichment of targeted analytes to obtain superior extraction performance. Dissolvable LDH nanosheets were used as absorbents, thus eliminating the elution step needed in traditional D-μ-SPE. The main influence experimental variables including pH of sample solution, amount of LDH, vortex time and volume of acidic solution were optimized in detail. Under the optimized conditions, the proposed method shows high precision (RSDs < 12.7%), low limits of detection (0.01-0.5 ng/g) and limits of quantitation (0.1-2.0 ng/g), acceptable recovery (80.1%-97.1%), thus making it a good alternative analytical strategy for the determination of SUHs residues at the low nanogram per gram range with desirable sensitivity.

Amino functionalized magnetic covalent organic framework for magnetic solid-phase extraction of sulfonylurea herbicides in environmental samples from tobacco land

An amino-functionalized magnetic covalent organic framework composite TpBD-(NH2 )2 @Fe3 O4 (Tp=Tp1,3,5-triformylphloroglucinol, BD-(NH2 )2 is 3,3',4,4'-biphenyltetramine) was prepared by post-synthesis modification. Due to its abundant benzene rings and amino groups, large specific surface area and porous structure, the prepared TpBD-(NH2 )2 @Fe3 O4 exhibits high extraction efficiency toward sulfonylurea herbicides. Based on this, a new method of magnetic solid-phase extraction with TpBD-(NH2 )2 @Fe3 O4 as the sorbent combined with high-performance liquid chromatography and ultraviolet detection was developed for trace analysis of sulfonylurea herbicides in environmental water, soil and tobacco leaves samples from tobacco land. Under the optimized conditions, the limits of detection within 0.05-0.14 μg/L were achieved with a high enrichment factor of 217-260-fold, and the relative standard deviations were 4.9-7.5% (n = 7, c = 0.5 μg/L). The linear range was around three orders of magnitude with the square of correlation coefficient higher than 0.9936. The method was applied to analyze five sulfonylurea herbicides in the environmental water, soil, and tobacco leave samples collected from tobacco land. No sulfonylurea herbicides were detected in these samples. The recoveries of target sulfonylurea herbicides in spiked environmental water, soil, and tobacco leaf samples were found in the range of 90.7-104, 70.7-99.0, and 59.3-97.8%, respectively. The results illustrate that the established TpBD-(NH2 )2 @Fe3 O4 -magnetic solid-phase extraction- high-performance liquid chromatography-ultraviolet detection method is efficient for the analysis of trace sulfonylurea herbicides in environmental samples.

The Contribution of Dietary Fructose to Non-alcoholic Fatty Liver Disease

Fructose, especially industrial fructose (sucrose and high fructose corn syrup) is commonly used in all kinds of beverages and processed foods. Liver is the primary organ for fructose metabolism, recent studies suggest that excessive fructose intake is a driving force in non-alcoholic fatty liver disease (NAFLD). Dietary fructose metabolism begins at the intestine, along with its metabolites, may influence gut barrier and microbiota community, and contribute to increased nutrient absorption and lipogenic substrates overflow to the liver. Overwhelming fructose and the gut microbiota-derived fructose metabolites (e.g., acetate, butyric acid, butyrate and propionate) trigger the de novo lipogenesis in the liver, and result in lipid accumulation and hepatic steatosis. Fructose also reprograms the metabolic phenotype of liver cells (hepatocytes, macrophages, NK cells, etc.), and induces the occurrence of inflammation in the liver. Besides, there is endogenous fructose production that expands the fructose pool. Considering the close association of fructose metabolism and NAFLD, the drug development that focuses on blocking the absorption and metabolism of fructose might be promising strategies for NAFLD. Here we provide a systematic discussion of the underlying mechanisms of dietary fructose in contributing to the development and progression of NAFLD, and suggest the possible targets to prevent the pathogenetic process.

Novel Fe3O4@metal-organic framework@polymer core-shell-shell nanospheres for fast extraction and specific preconcentration of nine organophosphorus pesticides from complex matrices

Herein, a novel core-shell-shell magnetic nanosphere denoted as Fe₃O₄@ZIF-8@polymer was fabricated by sequential in situ self-assembly and precipitation polymerization for effective magnetic solid-phase extraction of nine organophosphorus pesticides (OPPs) from river water, pear, and cabbage samples. The integrated Fe₃O₄@ZIF-8@polymer featured convenient magnetic separation property and excellent multi-target binding ability. More importantly, the functional polymer coating greatly improved the extraction performance of Fe₃O₄@ZIF-8 for OPPs, thus facilitating the simultaneous determination of trace OPP residues in real samples. The developed MPSE-LC-MS/MS method exhibited good linearity (R² ≥ 0.9991) over the concentration range of 0.2-200 µg L^-1, low limits of detection of 0.0002-0.005 μg L^-1 for river water and 0.006-0.185 μg kg^-1 for pear and cabbage, satisfactory precision with relative standard deviations ≤ 9.7% and accuracy with recoveries of 69.5-94.3%. These results highlight that the combination of polymers with MOFs has great potential to fabricate excellent adsorbents for high-throughput analysis of various contaminants in complex matrices.

Preparation of molecularly imprinted polymer with class-specific recognition for determination of 29 sulfonylurea herbicides in agro-products

Molecularly imprinting polymers with high selectivity toward 29 sulfonylurea herbicides were synthesized by precipitation polymerization, using metsulfuron-methyl and chlorsulfuron as the template molecule, 4-vinylpyridine as the function monomer, divinylbenzene as the crosslinking agent, and acetonitrile as porogen. The imprinted polymers were characterized and measured by scanning electron microscopy (SEM) and equilibrium adsorption experiments. The molecularly imprinted polymers displayed specific recognition for the tested 29 sulfonylurea herbicides, and the maximum apparent binding capacity was found to be 18.81 mg/g. The synthesized polymer was used as a solid-phase extraction (SPE) column coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) for determination of the tested analytes in agro-products. Within the range of 2-100 μg/L, the tested analytes have achieved a good linear association with correlation coefficient (R²) > 0.999. The calculated limits of detection (LODs, S/N=3) as along with limits of quantification (LOQs, S/N=10) were in the ranges of 0.005-0.07 μg/L and 0.018-0.23 μg/L, respectively. Under different spiking levels, the recovery rates were ranged from 74.8% - 110.5%, and the relative standard deviation (RSDs) were < 5.3%. Finally, the feasibility of the proposed methodology was successfully applied for detection of sulfonylurea herbicides in crops, vegetables, and oils samples.

Ionic covalent organic frameworks for the magnetic solid-phase extraction of perfluorinated compounds in environmental water samples

A novel magnetic ionic covalent organic framework (Fe₃O₄@EB-iCOFs) was designed and synthesized. It was then characterized by X-ray diffraction, N₂ adsorption-desorption analysis, and magnetic measurements, among others. The material shows the advantages of ionic property, large surface area, and magnetic responsiveness. It has potential of magnetic solid-phase extraction (MSPE) of perfluorinated compounds (PFCs). A method for the determination of PFCs based on MSPE-HPLC-MS/MS was established. The method has excellent linearity (r ≥ 0.995) in the working range 1-1000 ng L^-1 , good repeatability (1.4-5.8%, n = 6), low limits of detection in the range 0.1-0.8 ng L^-1 and satisfactory recoveries (between 73.9 and 108.3%).

Zeolitic imidazolate frameworks in analytical sample preparation

Zeolitic imidazolate frameworks are a class of metal-organic frameworks that are topologically isomorphic with zeolites. Zeolitic imidazolate frameworks are composed of tetrahedrally coordinated metal ions connected by imidazolate linkers and have a high porosity and chemical stability. Here, we summarize the progress made in the application of zeolitic imidazolate frameworks in sample preparation for analytical purposes. This review is focused on analytical methods based on liquid chromatography, gas chromatography, or capillary electrophoresis, where the use of zeolitic imidazolate frameworks has contributed to increasing the sensitivity and selectivity of the method. While bulk zeolitic imidazolate frameworks have been directly used in analytical sample preparation protocols, a variety of strategies for their magnetization or their incorporation into sorbent particles, monoliths, fibers, stir bars, or thin films, have been developed. These modifications have facilitated the handling and application of zeolitic imidazolate frameworks for a number of analytical sample treatments including magnetic solid-phase extraction, solid-phase microextraction, stir bar sorptive extraction, or thin film microextraction, among other techniques.